Esta es la versión HTML de un fichero adjunto a una solicitud de acceso a la información 'Merger inquiries'.



Ref. Ares(2020)4896948 - 18/09/2020
02013R1387 — EN — 01.07.2020 — 013.001 — 1
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability 
for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official 
Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links 
embedded in this document 
►B COUNCIL 
REGULATION 
(EU) 
No 
1387/2013 
of 17 December 2013 
suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial 
products and repealing Regulation (EU) No 1344/2011 
(OJ  L  354,  28.12.2013,  p.  201) 
Amended  by: 
Official  Journal 
No 
page 
date 
M1 
Council  Regulation  (EU)  No  722/2014  of  24  June  2014 
L  192 

1.7.2014 
M2 
Council  Regulation  (EU)  No  1341/2014  of  15  December  2014 
L  363 
10 
18.12.2014 
M3 
Council  Regulation  (EU)  2015/982  of  23  June  2015 
L  159 

25.6.2015 
M4 
Council  Regulation  (EU)  2015/2449  of  14  December  2015 
L  345 
11 
30.12.2015 
M5 
Council  Regulation  (EU)  2016/1051  of  24  June  2016 
L  173 

30.6.2016 
M6 
Council  Regulation  (EU)  2016/2390  of  19  December  2016 
L  360 
14 
30.12.2016 
M7 
Council  Regulation  (EU)  2017/1134  of  20  June  2017 
L  164 

27.6.2017 
M8 
Council  Regulation  (EU)  2017/2467  of  21  December  2017 
L  351 

30.12.2017 
M9 
Council  Regulation  (EU)  2018/914  of  25  June  2018 
L  162 

27.6.2018 
M10  Council  Regulation  (EU)  2018/2069  of  20  December  2018 
L  331 

28.12.2018 
M11  Council  Regulation  (EU)  2019/999  of  13  June  2019 
L  163 
27 
20.6.2019 
M12  Council  Regulation  (EU)  2019/2197  of  19  December  2019 
L  335 

27.12.2019 
M13  Council  Regulation  (EU)  2020/874  of  15  June  2020 
L  204 
18 
26.6.2020 
Corrected  by: 
C1 
Corrigendum,  OJ  L  293,  9.10.2014,  p.  57  (1387/2013) 
C2 
Corrigendum,  OJ  L  293,  9.10.2014,  p.  58  (722/2014) 
C3 
Corrigendum,  OJ  L  53,  25.2.2020,  p.  4  (2019/2197) 

02013R1387 — EN — 01.07.2020 — 013.001 — 2 
▼B
COUNCIL REGULATION (EU) No 1387/2013 
of 17 December 2013 
suspending the autonomous Common Customs Tariff duties on 
certain agricultural and industrial products and repealing 

Regulation (EU) No 1344/2011 
▼M3 
Article 1 
1. 
The autonomous Common Customs Tariff duties for the agricultural 
and industrial products listed in ►M4  the Annex ◄ are hereby suspended. 
2. 
Paragraph  1  does  not  apply  to  any  mixtures,  preparations  or 
products  made  up  of  different  components  containing  products  listed 
in  ►M4  the  Annex ◄. 
▼B 
Article 2 
1. 
The  Commission  may  at  any  time  review  the  suspensions  for  the 
products  listed  in  ►M4  the  Annex ◄  in  the  following  cases: 
(a)  at  its  own  initiative; 
(b)  at  the  request  of  Member  States. 
▼M4 
2. 
The  Commission  shall  review  the  suspensions  for  products  listed 
in  the  Annex  during  the  year  preceding  the  end  date  for  mandatory 
review  provided  for  in  that  Annex. 
Article 3 
Where  a  declaration  for  release  for  free  circulation  is  presented  for  the 
products  in  relation  to  which  the  supplementary  units  have  been 
provided  in  the  Annex,  the  exact  quantity  of  the  products  imported 
shall  be  entered  in  ‘Box  41:  Supplementary  units’  of  that  declaration 
using  the  measurement  unit  set  out  in  the  Annex. 
▼B 
Article 4 
Regulation  (EU)  No  1344/2011  is  hereby  repealed. 
Article 5 
This Regulation shall enter into force on the day of its publication in the 
Official Journal of the European Union

It  shall  apply  from  1  January  2014. 
This Regulation shall be binding in its entirety and directly applicable in 
all  Member  States. 

▼M12
 
▼C3 
ANNEX 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6748 
ex 0709 59 10 
10 
Fresh or chilled chanterelles for treatment other than simple repacking for retail sale (1 ) (2 ) 
0 % 
— 
31.12.2020 
0.3348 
ex 0710 21 00 
10 
Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a 
0 % 
— 
31.12.2023 
thickness  of  not  more  than  6  mm,  to  be  used,  in  their  pods,  in  the  manufacture  of 
prepared  meals (1 ) (2 ) 
0.3349 
ex 0710 80 95 
50 
Bamboo  shoots,  frozen,  not  put  up  for  retail  sale 
0 % 
— 
31.12.2023 
0.2829 
ex 0711 59 00 
11 
Mushrooms,  excluding  mushrooms  of  the genera Agaricus, Calocybe, Clitocybe, Lepista, 
0 % 
— 
31.12.2021 
Leucoagaricus, Leucopaxillus, Lyophyllum  and Tricholoma,  provisionally  preserved  in 
brine,  in  sulphur  water,  or  in  other  preservative  solutions,  but  unsuitable  in  that  state 
for  immediate  consumption,  for  the  food-canning  industry (2 ) 
02013R1387 
0.2463 
ex 0712 32 00 
10 
Mushrooms,  excluding  mushrooms  of the  genus Agaricus,  dried, whole  or  in identifiable 
0 % 
— 
31.12.2023 
ex 0712 33 00 
10 
slices  or  pieces,  for  treatment  other  than  simple  repacking  for  retail  sale (1 ) (2 ) 
ex 0712 39 00 
31 
— 
0.3347 
ex 0804 10 00 
30 
Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink 
0 % 
— 
31.12.2023 
EN — 
or  food  industries (2 ) 
01.07.2020 
0.2411 
0811 90 50 
Fruit  of  the  genus Vaccinium,  uncooked  or  cooked  by  steaming  or  boiling  in  water, 
0 % 
— 
31.12.2023 
0811 90 70 
frozen,  not  containing  added  sugar  or  other  sweetening  matter 
ex 0811 90 95 
70 
— 
013.001 
0.3228 
ex 0811 90 95 
20 
Boysenberries,  frozen,  not  containing  added  sugar,  not  put  up  for  retail  sale 
0 % 
— 
31.12.2023 
— 
0.2409 
ex 0811 90 95 
30 
Pineapple  (Ananas comosus),  in  pieces,  frozen 
0 % 
— 
31.12.2023 
3 

▼C3  
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2408 
ex 0811 90 95 
40 
Rose-hips,  uncooked  or  cooked  by  steaming  or  boiling  in  water,  frozen,  not  containing 
0 % 
— 
31.12.2023 
added  sugar  or  other  sweetening  matter 
0.2864 
ex 1511 90 19 
20 
Palm  oil,  coconut  (copra)  oil,  palm  kernel  oil,  for  the  manufacture  of: 
0 % 
— 
31.12.2020 
ex 1511 90 91 
20 
—  industrial  monocarboxylic  fatty  acids  of  subheading  3823 19 10, 
ex 1513 11 10 
20 
—  methyl  esters  of  fatty  acids  of  heading  2915  or  2916, 
ex 1513 19 30 
20 
—  fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture 
ex 1513 21 10 
20 
of  cosmetics,  washing  products  or  pharmaceutical  products, 
ex 1513 29 30 
20 
—  fatty  alcohols  of  subheading  2905 16,  pure  or  mixed,  used  for  the  manufacture  of 
cosmetics,  washing  products  or  pharmaceutical  products, 
—  stearic  acid  of  subheading  3823 11 00, 
—  goods  of  heading  3401,  or 
—  fatty  acids  with  high  purity  of  heading  2915 (2 ) 
0.6789 
ex 1512 19 10 
10 
Refined  safflower  oil  (CAS  RN  8001-23-8)  for  use  in  the  manufacture  of: 
0 % 
— 
31.12.2020 
—  conjugated  linoleic  acid  of  heading  3823,  or 
—  ethyl-  or  methyl  esters  of  linoleic  acid  of  heading  2916 (2 ) 
02013R1387 
0.3341 
ex 1515 90 99 
92 
Vegetable  oil,  refined,  containing  by  weight  35 %  or  more  but  not  more  than  50 %  of 
0 % 
— 
31.12.2023 
arachidonic  acid  or  35 %  or  more  but  not  more  than  50 %  of  docosahexaenoic  acid 
— 
EN — 
0.7686 
1516 20 10 
Hydrogenated  castor  oil,  so  called  'opal-wax' 
0 % 
— 
31.12.2023 
01.07.2020 
0.4708 
ex 1516 20 96 
20 
Jojoba  oil,  hydrogenated  and  interesterified,  without  any  further  chemical  modification 
0 % 
— 
31.12.2024 
and  not  subjected  to  any  texturisation  process 
— 
013.001 
0.4080 
ex 1517 90 99 
10 
Vegetable  oil,  refined,  containing  by  weight  25 %  or  more  but  not  more  than  50 % 
0 % 
— 
31.12.2021 
arachidonic  acid  or  12 %  or  more  but  not  more  than  65 %  docosahexaenoic  acid  and 
standardized  with  high  oleic  sunflower  oil  (HOSO) 
— 


▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6182 
ex 1901 90 99 
39 
Preparation  in  powder  form  containing  by  weight: 
0 % 
— 
31.12.2023 
ex 2106 90 98 
45 
—  15 %  or  more  but  not  more  than  35 %  of  wheat  derived  Maltodextrin, 
—  15 %  or  more  but  not  more  than  35 %  of  whey  (milk  serum), 
—  10 %  or  more  but  not  more  than  30 %  of  refined,  bleached,  deodorised  and  non- 
hydrogenated  sunflower  oil, 
—  10 %  or  more  but  not  more  than  30 %  of  blended,  aged  spray  dried  cheese, 
—  5 %  or  more  but  not  more  than  15 %  of  buttermilk,  and 
—  0,1 %  or  more  but  not  more  than  10 %  of  sodium  caseinate,  disodium  phosphate, 
lactic  acid 
0.2423 
ex 1902 30 10 
10 
Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not 
0 % 
— 
31.12.2023 
ex 1903 00 00 
20 
put  up  for  retail  sale 
0.2866 
ex 2005 91 00 
10 
Bamboo  shoots,  prepared  or  preserved,  in  immediate  packings  of  a  net  content  of  more 
0 % 
— 
31.12.2023 
than  5  kg 
0.5884 
ex 2007 99 50 
83 
Mango  puree  concentrate,  obtained  by  cooking: 
% (3 ) 
— 
31.12.2022 
02013R1387 
ex 2007 99 50 
93 
—  of  the  Genus Mangifera  spp., 
ex 2007 99 93 
10 
—  with  a  sugar  content  by  weight  of  not  more  than  30 %, 
for  use  in  the  manufacture  of  products  of  food  and  drink  industry (2 ) 
— 
0.5875 
ex 2007 99 50 
84 
Papaya  puree  concentrate,  obtained  by  cooking: 
7,8 % (3 ) 
— 
31.12.2022 
ex 2007 99 50 
94 
—  of  the  Genus Carica  spp., 
EN — 
—  with  a  sugar  content  by  weight  of  more  than  13 %  but  not  more  than  30 %, 
for  use  in  the  manufacture  of  products  of  food  and  drink  industry (2 ) 
01.07.2020 
0.5867 
ex 2007 99 50 
85 
Guava  puree  concentrate,  obtained  by  cooking: 
% (3 ) 
— 
31.12.2022 
ex 2007 99 50 
95 
—  of  the  Genus Psidium  spp., 
—  with  a  sugar  content  by  weight  of  more  than  13 %  but  not  more  than  30 %, 
— 
for  use  in  the  manufacture  of  products  of  food  and  drink  industry (2 ) 
013.001 
0.4716 
ex 2008 93 91 
20 
Sweetened  dried  cranberries, excluding  packing  alone  as  processing,  for  the  manufacture 
0 % 
— 
31.12.2022 
— 
of  products  of  food  processing  industries (4 ) 


▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5004 
ex 2008 99 48 
94 
Mango  puree: 
6 % 
— 
31.12.2020 
—  not  from  concentrate, 
—  of  the  genus Mangifera
—  of  a  Brix  value  of  14  or  more,  but  not  more  than  20 
used  in  the  manufacture  of  products  of  drink  industry (2 ) 
0.4709 
ex 2008 99 49 
30 
Seedless  boysenberry  puree  not  containing  added  spirit, whether  or  not  containing  added 
0 % 
— 
31.12.2020 
ex 2008 99 99 
40 
sugar 
0.5587 
ex 2008 99 49 
70 
Blanched  vine  leaves  of  the  genus Karakishmish,  in  brine,  containing  by  weight: 
0 % 
— 
31.12.2022 
ex 2008 99 99 
11 
—  more  than  6 %  of  salt  concentration, 
—  0,1 %  or  more  but  not  more  than  1,4 %  of  acidity  expressed  as  citric  acid  monohy­
drate,  and 
—  whether or not but not more than 2000 mg/kg of sodium benzoate according CODEX 
STAN  192-1995, 
for  use  in  the  manufacture  of  stuffed  vine  leaves  with  rice (2 ) 
02013R1387 
0.6723 
ex 2008 99 91 
20 
Chinese  water  chestnuts  (Eleocharis dulcis  or Eleocharis tuberosa)  peeled,  washed, 
% (3 ) 
— 
31.12.2020 
blanched,  chilled  and  individually  quick-frozen  for  use  in  the  manufacture  of  products 
of  food  industry  for  treatment  other  than  simple  repacking (1 ) (2 ) 
— 
EN — 
0.7767 
ex 2008 99 99 
35 
Frozen  pulp  from  acai  berries: 
0 % 
— 
31.12.2024 
—  hydrated  and  pasteurised, 
—  separated  from  the  kernels  by  the  addition  of  water, 
01.07.2020 
—  with  a  Brix  value  of  less  than  6,  and 
—  with  a  sugar  content  of  less  than  5,6 % 
— 
0.4992 
ex 2009 41 92 
20 
Pineapple  juice: 
8 % 
— 
31.12.2020 
013.001 
ex 2009 41 99 
70 
—  not  from  concentrate, 
—  of  the  genus Ananas
—  of  a  Brix  value  of  11  or  more  but  not  more  than  16, 
used  in  the  manufacture  of  products  of  drink  industry (2 ) 
— 


▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4664 
ex 2009 49 30 
91 
Pineapple  juice,  other  than  in  powder  form: 
0 % 
— 
31.12.2024 
—  with  a  Brix  value  of  more  than  20  but  not  more  than  67, 
—  a  value  of  more  than  EUR  30  per  100  kg  net  weight, 
—  containing  added  sugar, 
used  in  the  manufacture  of  products  of  food  or  drink  industry (2 ) 
0.4623 
ex 2009 81 31 
10 
Cranberry  juice  concentrate: 
0 % 

31.12.2024 
—  of  a  Brix  value  of  40  or  more  but  not  more  than  66, 
—  in  immediate  packings  of  a  content  of  50  litres  or  more 
0.6356 
ex 2009 89 73 
11 
Passion  fruit  juice  and  passion  fruit  juice  concentrate,  whether  or  not  frozen: 
0 % 

31.12.2024 
ex 2009 89 73 
13 
—  with  a  Brix  value  of  13,7  or  more  but  not  more  than  55, 
—  of  a  value  of  more  than  EUR  30  per  100  kg  net  weight, 
—  in  immediate  packings  of  a  content  of  50  litres  or  more,  and 
—  with  added  sugar, 
for  the  use  in  the  manufacture  of  products  of  food  or  drink  industry (2 ) 
02013R1387 
0.4159 
ex 2009 89 79 
20 
Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 
0 % 

31.12.2021 
67,  in  immediate  packings  of  a  content  of  50  litres  or  more 
— 
EN — 
0.6050 
ex 2009 89 79 
30 
Frozen  acerola  juice  concentrate: 
0 % 

31.12.2023 
—  with  a  Brix  value  of  more  than  48  but  not  more  than  67, 
—  in  immediate  packings  of  a  content  of  50  litres  or  more 
01.07.2020 
0.5206 
ex 2009 89 79 
85 
Acai  berry  juice  concentrate: 
0 % 
— 
31.12.2021 
—  of  the  species Euterpe oleracea
— 
—  frozen, 
013.001 
—  not  sweetened, 
—  not  in  powder  form, 
—  of  a  Brix  value  of  23  or  more  but  not  more  than  32, 
in  immediate  packings  of  a  content  of  10  kg  or  more 
— 


▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6365 
ex 2009 89 97 
21 
Passion  fruit  juice  and  passion  fruit  juice  concentrate,  whether  or  not  frozen: 
0 % 

31.12.2024 
ex 2009 89 97 
29 
—  with  a  Brix  value  of  10  or  more  but  not  more  than  13,7, 
—  of  a  value  of  more  than  EUR  30  per  100  kg  net  weight, 
—  in  immediate  packings  of  a  content  of  50  litres  or  more,  and 
—  without  added  sugar, 
for  the  use  in  the  manufacture  of  products  of  food  or  drink  industry (2 ) 
0.4157 
ex 2009 89 99 
96 
Coconut  water 
0 % 

31.12.2021 
—  unfermented, 
—  not  containing  added  spirit  or  sugar,  and 
—  in  immediate  packing  of  a  content  of  20  litres  or  more (1 ) 
0.6152 
ex 2106 10 20 
20 
Soya  protein  concentrate  having  a  protein  content  by  weight,  calculated  on  a  dry  weight 
0 % 
— 
31.12.2023 
basis,  of  65 %  or  more  but  not  more  than  90 %  in  powder  or  textured  form 
02013R1387 
0.3340 
ex 2106 10 20 
30 
Preparation  on  the  base  of  soya  protein  isolate,  containing  by  weight  6,6 %  or  more  but 
0 % 
— 
31.12.2023 
not  more  than  8,6 %  of  calcium  phosphate 
— 
EN — 
0.5208 
ex 2106 90 92 
45 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2021 
—  more  than  30 %  but  not  more  than  35 %  liquorice  extract, 
01.07.2020 
—  more  than  65 %  but  not  more  than  70 %  tricaprylin, 
standardised  by  weight  to  3 %  or  more  but  not  more  than  4 %  glabridin 
— 
013.001 
0.7284 
ex 2106 90 92 
50 
Casein  protein  hydrolysate  consisting  of: 
0 % 
— 
31.12.2022 
—  by  weight  20 %  or  more  but  not  more  than  70 %  free  amino  acids,  and 
—  peptones of which by weight more than 90 % having a molecular weight of not more 
than  2000  Da 
— 


▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7435 
ex 2106 90 98 
47 
Preparation,  having  a  moisture  content  of  1 %  or  more  but  not  more  than  4 %,  and 
0 % 
— 
31.12.2022 
containing  by  weight: 
—  15 %  or  more  but  not  more  than  35 %  of  buttermilk, 
—  20 %  (±10 %)  of  lactose, 
—  20 %  (±10 %)  of  whey  protein  concentrate, 
—  15 %  (±10 %)  of  cheddar  cheese, 
—  3 %  (±2 %)  of  salt, 
—  0,1 %  or  more  but  not  more  than  10 %  of  lactic  acid  E270, 
—  0,1 %  or  more  but  not  more  than  10 %  of  gum  arabic  E414, 
for  use  in  the  manufacture  of  products  of  food  and  drink  industry (2 ) 
0.5246 
ex 2519 90 10 
10 
Fused  magnesia  with  a  purity  by  weight  of  94 %  or  more 
0 % 
— 
31.12.2021 
0.6330 
ex 2707 50 00 
20 
Mixture  of  xylenol-isomers  and  ethyl  phenol-isomers,  with  a  total  xylenol  content  by 
0 % 
— 
31.12.2024 
ex 2707 99 80 
10 
weight  of  62 %  or  more  but  less  than  95 % 
02013R1387 
0.6168 
ex 2707 99 99 
10 
Heavy  and  medium  oils,  whose  aromatic content  exceeds  their  non-aromatic  content,  for 
0 % 
— 
31.12.2023 
use as refinery feedstock to undergo one of the specific processes described in Additional 
note  5  to  Chapter  27 (2 ) 
— 
0.7823 
ex 2710 19 81 
30 
Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic 
0 % 
— 
31.12.2023 
ex 2710 19 99 
50 
hydrocarbons,  containing: 
EN — 
—  90 %  or  more  by  weight  of  saturates,  and 
—  not  more  than  0,03 %  by  weight  of  sulphur, 
01.07.2020 
and  with: 
—  a  viscosity  index  of  80  or  more,  but  less  than  120,  and 
a  kinematic  viscosity  less  than  5,0  cSt  at  100  °C  or  more  than  13,0  cSt  at  100  °C 
— 
0.7822 
ex 2710 19 81 
40 
Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic 
0 % 
— 
31.12.2024 
013.001 
ex 2710 19 99 
60 
hydrocarbons,  containing: 
—  90 %  or  more  by  weight  of  saturates,  and 
—  not  more  than  0,03 %  by  weight  of  sulphur, 
— 
with  a  viscosity  index  of  120  or  more 


▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6495 
ex 2710 19 99 
20 
Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy 
0 % 
— 
31.12.2024 
paraffin  conversion  process  (HPC),  containing: 
—  not  more  than  1  mg/kg  of  sulphur, 
—  more  than  99 %  by  weight  of  saturated  hydrocarbons, 
—  more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain 
length  of  18  or  more  but  not  more  than  50,  and 
—  a  kinematic  viscosity  at  40  °C  of  more  than  6,5  mm2 /s,  or 
—  a kinematic viscosity at 40  °C  of more than 11  mm2 /s with a viscosity index  of 120 
or  more 
0.7393 
ex 2712 90 99 
10 
Blend of 1-alkenes (alpha-olefins) (CAS RN 131459-42-2)  containing by weight 80 % or 
0 % 
— 
31.12.2022 
more  of  1-alkenes  of  a  chain  length  of  24  carbon  atoms  or  more  but  not  exceeding  64 
carbon  atoms  containing  by  weight  more  than  72 %  1-alkenes  with  more  than  28  carbon 
atoms 
0.4531 
ex 2804 50 90 
40 
Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more 
0 % 
— 
31.12.2023 
than  99,999 %,  based  on  metallic  impurities  measured  by  ICP  analysis 
02013R1387 
0.6036 
2804 70 00 
Phosphorus 
0 % 
— 
31.12.2023 
— 
0.6658 
ex 2805 12 00 
10 
Calcium  with  a  purity  of  98 %  or  more  by  weight,  in  powder  or  wire  form  (CAS  RN 
0 % 
— 
31.12.2020 
7440-70-2) 
EN 
— 
01.07.2020 
0.5609 
ex 2805 19 90 
20 
Lithium  metal  (CAS  RN  7439-93-2)  of  a  purity  by  weight  of  98,8 %  or  more 
0 % 
— 
31.12.2022 
0.2559 
ex 2805 30 10 
10 
Alloy  of  cerium  and  other  rare-earth  metals,  containing  by  weight  47 %  or  more  of 
0 % 
— 
31.12.2023 
— 
cerium 
013.001 
0.4979 
2805 30 20 
Rare-earth  metals,  scandium  and  yttrium,  of  a  purity  by  weight  of  95 %  or  more 
0 % 
— 
31.12.2020 
2805 30 30 
— 
2805 30 40 
10
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7769 
ex 2809 20 00 
10 
Aqueous solution of phosphoric acid (CAS RN 7664-38-2), containing by weight 85 % or 
0 % 
— 
31.12.2024 
more  phosphoric  acid 
0.3338 
ex 2811 19 80 
10 
Sulphamidic  acid  (CAS  RN  5329-14-6) 
0 % 
— 
31.12.2023 
0.5418 
ex 2811 19 80 
20 
Hydrogen  iodide  (CAS  RN  10034-85-2) 
0 % 
— 
31.12.2021 
0.2407 
ex 2811 22 00 
10 
Silicon  dioxide  (CAS  RN  7631-86-9)  in  the  form  of  powder,  for  use  in  the  manufacture 
0 % 
— 
31.12.2023 
of  high  performance  liquid  chromatography  columns  (HPLC)  and  sample  preparation 
cartridges (2 ) 
0.6836 
ex 2811 22 00 
15 
Amorphous  silicon  dioxide  (CAS  RN  60676-86-0): 
0 % 
— 
31.12.2020 
—  in  the  form  of  powder, 
02013R1387 
—  of  a  purity  by  weight  of  99,0 %  or  more, 
—  with  a  median  grain  size  of  0,7  μm  or  more,  but  not  more  than  2,1  μm, 
—  where  70 %  of  the  particles  have  a  diameter  of  not  more  than  3  μm 
— 
0.7292 
ex 2811 29 90 
10 
Tellurium  dioxide  (CAS  RN  7446-07-3) 
0 % 
— 
31.12.2022 
EN 
— 
01.07.2020 
0.3308 
ex 2812 90 00 
10 
Nitrogen  trifluoride  (CAS  RN  7783-54-2) 
0 % 
— 
31.12.2023 
0.5747 
ex 2816 40 00 
10 
Barium  hydroxide  (CAS  RN  17194-00-2) 
0 % 
— 
31.12.2022 
— 
013.001 
0.7594 
ex 2818 10 11 
10 
Sol-Gel  corundum  (CAS  RN  1302-74-5)  with  an  aluminium  oxide  content  of  99,6 %  or 
0 % 
— 
31.12.2023 
more  by  weight,  having  a  micro  crystalline  structure  in  the  form  of  rods  with  an  aspect 
— 
ratio  of  1,3  or  more,  but  not  more  than  6,0 
11
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5110 
ex 2818 10 91 
20 
Sintered  corundum  with  a  micro  crystalline  structure,  consisting  of  aluminium  oxide 
0 % 
— 
31.12.2020 
(CAS  RN  1344-28-1),  magnesium  aluminate  (CAS  RN  12068-51-8)  and  the  rare  earth 
aluminates  of  yttrium,  lanthanum,  and  neodymium,  with  a  content  by  weight  (calculated 
as  oxides)  of: 
—  94 %  or  more,  but  less  than  98,5 %  of  aluminium  oxide, 
—  2 %  (±1,5  %)  of  magnesium  oxide, 
—  1 %  (±0,6  %)  of  yttrium  oxide, 
and 
—  either  2 %  (±1,2  %)  of  lanthanum  oxide,  or 
—  2 %  (±1,2  %)  of  lanthanum  oxide  and  neodymium  oxide, 
with  less  than  50 %  of  the  total  weight  having  a  particle  size  of  more  than  10  mm 
0.4640 
ex 2818 20 00 
10 
Activated  alumina  with  a  specific  surface  area  of  at  least  350  m2 /g 
0 % 
— 
31.12.2024 
0.6837 
ex 2818 30 00 
20 
Aluminium  hydroxide  (CAS  RN  21645-51-2): 
0 % 
— 
31.12.2020 
—  in  the  form  of  powder, 
—  with  a  purity  by  weight  of  99,5 %  or  more, 
—  with  a  decomposition  point  of  263°C  or  more, 
—  with  a  particle  size  of  4  μm  (±  1  μm), 
—  with  a  Total-Na 2O-content  by  weight  of  not  more  than  0,06 % 
02013R1387 
0.3306 
ex 2818 30 00 
30 
Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318- 
0 % 
— 
31.12.2023 
23-6) 
0.5369 
ex 2819 90 90 
10 
Dichromium  trioxide  (CAS  RN  1308-38-9)  for  use  in  metallurgy (2 ) 
0 % 
— 
31.12.2021 
— 
EN 
0.5752 
ex 2823 00 00 
10 
Titanium  dioxide  (CAS  RN  13463-67-7): 
0 % 
— 
31.12.2022 
—  of  a  purity  by  weight  of  99,9 %  or  more, 
— 
—  with  an  average  grain-size  of  0,7  μm  or  more  but  not  more  than  2,1  μm 
01.07.2020 
0.5576 
ex 2825 10 00 
10 
Hydroxylammonium  chloride  (CAS  RN  5470-11-1) 
0 % 
— 
31.12.2022 
▼M13 
— 
013.001 
0.7897 
ex 2825 20 00 
10 
Lithium  hydroxide  monohydrate  (CAS  RN  1310-66-3) 
2,6 % 
— 
31.12.2020 
C3 
— 
0.3800 
2825 30 00 
Vanadium  oxides  and  hydroxides 
0 % 
— 
31.12.2021 
12
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3303 
ex 2825 50 00 
20 
Copper  (I  or  II)  oxide  containing  by  weight  78 %  or  more  of  copper  and  not  more  than 
0 % 
— 
31.12.2023 
0,03 %  of  chloride 
0.6819 
ex 2825 50 00 
30 
Copper  (II)  oxide  (CAS  RN  1317-38-0),  with  a  particle  size  of  not  more  than  100  nm 
0 % 
— 
31.12.2020 
0.5555 
ex 2825 60 00 
10 
Zirconium  dioxide  (CAS  RN  1314-23-4) 
0 % 
— 
31.12.2022 
0.6980 
ex 2825 70 00 
10 
Molybdenum  trioxide  (CAS  RN  1313-27-5) 
0 % 
— 
31.12.2021 
0.7193 
ex 2825 70 00 
20 
Molybdic  Acid  (CAS  RN  7782-91-4) 
0 % 
— 
31.12.2021 
0.5055 
ex 2826 19 90 
10 
Tungsten  hexafluoride  (CAS  RN  7783-82-6)  with  a  purity  by  weight  of  99,9 %  or  more 
0 % 
— 
31.12.2020 
0.5498 
ex 2826 90 80 
10 
Lithium  hexafluorophosphate  (1-)  (CAS  RN  21324-40-3) 
2,7 % 
— 
31.12.2020 
02013R1387 
0.2865 
ex 2827 39 85 
10 
Copper  monochloride  (CAS  RN  7758-89-6)  of  a  purity  by  weight  of  96 %  or  more  but 
0 % 
— 
31.12.2023 
not  more  than  99 % 
— 
0.4180 
ex 2827 39 85 
20 
Antimony  pentachloride  (CAS  RN  7647-18-9)  of  a  purity  by  weight  of  99 %  or  more 
0 % 
— 
31.12.2021 
EN 
— 
01.07.2020 
0.6143 
ex 2827 39 85 
40 
Barium  chloride  dihydrate  (CAS  RN  10326-27-9) 
0 % 
— 
31.12.2023 
0.4423 
ex 2827 49 90 
10 
Hydrated  zirconium  dichloride  oxide  (CAS  RN  7699-43-6) 
0 % 
— 
31.12.2023 
— 
013.001 
0.6463 
ex 2827 60 00 
10 
Sodium  iodide  (CAS  RN  7681-82-5) 
0 % 
— 
31.12.2024 
0.7596 
ex 2828 10 00 
10 
Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or 
0 % 
— 
31.12.2023 
— 
more 
13
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3302 
ex 2830 10 00 
10 
Disodium  tetrasulphide  (CAS  RN  12034-39-8),  containing  by  weight  38 %  or  less  of 
0 % 
— 
31.12.2023 
sodium  calculated  on  the  dry  weight 
0.3859 
ex 2833 29 80 
20 
Manganese  sulphate  monohydrate  (CAS  RN  10034-96-5) 
0 % 
— 
31.12.2023 
0.5090 
ex 2833 29 80 
30 
Zirconium  sulphate  (CAS  RN  14644-61-2) 
0 % 
— 
31.12.2020 
0.4338 
ex 2835 10 00 
10 
Sodium  hypophosphite  monohydrate  (CAS  RN  10039-56-2) 
0 % 
— 
31.12.2022 
0.6144 
ex 2835 10 00 
20 
Sodium  hypophosphite  (CAS  RN  7681-53-0) 
0 % 
— 
31.12.2023 
0.7452 
ex 2835 10 00 
30 
Aluminium  Phosphinate  (CAS  RN  7784-22-7) 
0 % 
— 
31.12.2023 
0.2524 
ex 2836 91 00 
20 
Lithium  carbonate,  containing  one  or  more  of  the  following  impurities  at  the  concen­
0 % 
— 
31.12.2023 
trations  indicated: 
02013R1387 
—  2  mg/kg  or  more  of  arsenic, 
—  200  mg/kg  or  more  of  calcium, 
—  200  mg/kg  or  more  of  chlorides, 
—  20  mg/kg  or  more  of  iron, 
—  150  mg/kg  or  more  of  magnesium, 
— 
—  20  mg/kg  or  more  of  heavy  metals, 
EN 
—  300  mg/kg  or  more  of  potassium, 
—  300  mg/kg  or  more  of  sodium, 
— 
—  200  mg/kg  or  more  of  sulphates, 
01.07.2020 
determined  according  to  the  methods  specified  in  the  European  Pharmacopœia 
0.2863 
ex 2836 99 17 
30 
Zirconium  (IV)  basic  carbonate  (CAS  RN  57219-64-4  or  37356-18-6)  with  a  purity  by 
0 % 
— 
31.12.2023 
weight  of  96 %  or  more 
— 
013.001 
0.3300 
ex 2837 19 00 
20 
Copper  cyanide  (CAS  RN  544-92-3) 
0 % 
— 
31.12.2023 
— 
0.4078 
ex 2837 20 00 
10 
Tetrasodium  hexacyanoferrate  (II)  (CAS  RN  13601-19-9) 
0 % 
— 
31.12.2021 
14
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4339 
ex 2839 19 00 
10 
Disodium  disilicate  (CAS  RN  13870-28-5) 
0 % 
— 
31.12.2022 
0.2861 
ex 2839 90 00 
20 
Calcium  silicate  (CAS  RN  1344-95-2) 
0 % 
— 
31.12.2023 
0.6632 
ex 2840 20 90 
10 
Zinc  borate  (CAS  RN  12767-90-7) 
0 % 
— 
31.12.2020 
▼M13 
0.7288 
ex 2841 50 00 
11 
Potassium  dichromate  (CAS  RN  7778-50-9)  with  a  purity  by  weight  of  99 %  or  more 
2 % 
— 
31.12.2021 
C3 
0.6142 
ex 2841 70 00 
10 
Diammonium  tetraoxomolybdate(2-)  (CAS  RN  13106-76-8) 
0 % 
— 
31.12.2023 
0.6482 
ex 2841 70 00 
30 
Hexaammonium  heptamolybdate,  anhydrous  (CAS  RN  12027-67-7)  or  as  tetrahydrate 
0 % 
— 
31.12.2024 
(CAS  RN  12054-85-2) 
02013R1387 
0.6981 
ex 2841 70 00 
40 
Diammonium  dimolybdate  (CAS  RN  27546-07-2) 
0 % 
— 
31.12.2021 
0.4323 
ex 2841 80 00 
10 
Diammonium  wolframate  (ammonium  paratungstate)  (CAS  RN  11120-25-5) 
0 % 
— 
31.12.2022 
— 
0.7301 
ex 2841 90 30 
10 
Potassium  metavanadate  (CAS  RN  13769-43-2) 
0 % 
— 
31.12.2022 
EN 
0.4222 
ex 2841 90 85 
10 
Lithium  cobalt(III)  oxide  (CAS  RN  12190-79-3)  with  a  cobalt  content  of  at  least  59 % 
2,7 % 
— 
31.12.2020 
— 
01.07.2020 
0.5936 
ex 2841 90 85 
20 
Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or 
0 % 
— 
31.12.2023 
more 
0.4416 
ex 2842 10 00 
10 
Synthetic  beta  zeolite  powder 
0 % 
— 
31.12.2023 
— 
013.001 
0.4588 
ex 2842 10 00 
20 
Synthetic  chabasite  zeolite  powder 
0 % 
— 
31.12.2024 
— 
0.7097 
ex 2842 10 00 
40 
Aluminosilicate  (CAS  RN  1318-02-1)  with  a  zeolite  structure  of  Aluminophosphate- 
0 % 
— 
31.12.2021 
eighteen  (AEI)  for  use  in  the  manufacture  of  catalytic  preparations (2 ) 
15
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7397 
ex 2842 10 00 
50 
Fluorphlogopite  (CAS  RN  12003-38-2) 
0 % 
— 
31.12.2022 
0.4642 
ex 2842 90 10 
10 
Sodium  selenate  (CAS  RN  13410-01-0) 
0 % 
— 
31.12.2024 
0.7400 
ex 2842 90 80 
30 
Aluminium  trititanium  dodecachloride  (CAS  RN  12003-13-3) 
0 % 
— 
31.12.2022 
0.3295 
2845 10 00 
Heavy  water  (deuterium  oxide)  (Euratom)  (CAS  RN  7789-20-0) 
0 % 
— 
31.12.2023 
0.3297 
2845 90 10 
Deuterium  and  compounds  thereof;  hydrogen  and  compounds  thereof,  enriched  in 
0 % 
— 
31.12.2023 
deuterium;  mixtures  and  solutions  containing  these  products  (Euratom
0.4189 
ex 2845 90 90 
10 
Helium-3  (CAS  RN  14762-55-1) 
0 % 
— 
31.12.2021 
0.4191 
ex 2845 90 90 
20 
Water  enriched  at  a  level  of  95 %  or  more  by  weight  with  oxygen-18  (CAS  RN  14314- 
0 % 
— 
31.12.2023 
42-2) 
02013R1387 
0.4190 
ex 2845 90 90 
30 
(13 C)Carbon  monoxide  (CAS  RN  1641-69-6) 
0 % 
— 
31.12.2021 
0.2859 
ex 2846 10 00 
10 
Rare-earth  concentrate  containing  by  weight  60 %  or  more  but  not  more  than  95 %  of 
0 % 
— 
31.12.2023 
ex 3824 99 96 
53 
rare-earth  oxides  and  not  more  than  1 %  each  of  zirconium  oxide,  aluminium  oxide  or 
— 
iron  oxide,  and  having  a  loss  on  ignition  of  5 %  or  more  by  weight 
EN 
— 
0.3296 
ex 2846 10 00 
20 
Dicerium  tricarbonate  (CAS  RN  537-01-9),  whether  or  not  hydrated 
0 % 
— 
31.12.2023 
01.07.2020 
0.3420 
ex 2846 10 00 
30 
Cerium  lanthanum  carbonate,  whether  or  not  hydrated 
0 % 
— 
31.12.2023 
0.3227 
2846 90 10 
Compounds,  inorganic  or  organic,  of  rare-earth  metals,  of  yttrium  or  of  scandium  or  of 
0 % 
— 
31.12.2023 
— 
2846 90 20 
mixtures  of  these  metals,  other  than  those  of  subheading  2846 10 00 
013.001 
2846 90 30 
2846 90 90 
— 
0.3418 
ex 2850 00 20 
10 
Silane  (CAS  RN  7803-62-5) 
0 % 
— 
31.12.2023 
16
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.3419 
ex 2850 00 20 
80 
Arsine  (CAS  RN  7784-42-1)  with  a  purity  by  volume  of  99,999 %  or  more 
0 % 
— 
31.12.2024 
C3 
0.4332 
ex 2850 00 20 
30 
Titanium  nitride  (CAS  RN  25583-20-4)  with  a  particle  size  of  not  more  than  250  nm 
0 % 
— 
31.12.2022 
0.5497 
ex 2850 00 20 
40 
Germanium  tetrahydride  (CAS  RN  7782-65-2) 
0 % 
— 
31.12.2021 
0.7302 
ex 2850 00 20 
60 
Disilane  (CAS  RN  1590-87-0) 
0 % 
— 
31.12.2022 
0.7555 
ex 2850 00 20 
70 
Cubic  Boron  nitride  (CAS  RN  10043-11-5) 
0 % 
— 
31.12.2023 
0.4492 
ex 2850 00 60 
10 
Sodium  azide  (CAS  RN  26628-22-8) 
0 % 
— 
31.12.2023 
0.3421 
ex 2853 90 90 
20 
Phosphine  (CAS  RN  7803-51-2) 
0 % 
— 
31.12.2023 
02013R1387 
0.7289 
ex 2903 39 19 
20 
5-Bromopent-1-ene  (CAS  RN  1119-51-3) 
0 % 
— 
31.12.2022 
0.6633 
2903 39 21 
Difluoromethane  (CAS  RN  75-10-5) 
0 % 
— 
31.12.2020 
— 
0.6007 
ex 2903 39 24 
10 
Pentafluoroethane  (CAS  RN  354-33-6) 
0 % 
— 
31.12.2024 
EN 
— 
0.3674 
ex 2903 39 26 
10 
1,1,1,2-Tetrafluoroethane  feedstock  for  pharmaceutical  grade  production  conforming  to 
0 % 
— 
31.12.2024 
01.07.2020 
the  following  specification: 
—  not  more  than  600  ppm  by  weight  of  R134  (1,1,2,2-tetrafluoroethane), 
—  not  more  than  5  ppm  by  weight  of  R143a  (1,1,1-trifluoroethane), 
—  not  more  than  2  ppm  by  weight  of  R125  (pentafluoroethane), 
—  not  more  than  100  ppm  by  weight  of  R124  (1-chloro-1,2,2,2-tetrafluoroethane), 
— 
—  not  more  than  30  ppm  by  weight  of  R114  (1,2-dichlorotetrafluoroethane), 
013.001 
—  not  more  than  50  ppm  by  weight  of  R114a  (1,1-Dichlorotetrafluoroethane), 
—  not  more  than  250  ppm  by  weight  of  R133a  (1-Chloro-2,2,2-Trifluoroethane), 
—  not  more  than  2  ppm  by  weight  of  R22  (Chlorodifluoromethane), 
— 
—  not  more  than  2  ppm  by  weight  of  R115  (Chloropentafluoroethane), 
—  not  more  than  2  ppm  by  weight  of  R12  (Dichlorodifluoromethane), 
17
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
—  not  more  than  20  ppm  by  weight  of  R40  (Methyl  chloride), 
—  not  more  than  20  ppm  by  weight  of  R245cb  (1,1,1,2,2-pentafluoropropane), 
—  not  more  than  20  ppm  by  weight  of  R12B1  (Chlorodifluorobromomethane), 
—  not  more  than  20  ppm  by  weight  of  R32  (Difluoromethane), 
—  not  more  than  15  ppm  by  weight  of  R31  (Chlorofluoromethane), 
—  not  more  than  10  ppm  by  weight  of  R152a  (1,1-Difluoroethane), 
—  not  more  than  20  ppm  by  weight  of  1131  (1-Chloro-2-Fluoroethylene), 
—  not  more  than  20  ppm  by  weight  of  1122  (1-Chloro-2,2-Difluoroethylene), 
—  not  more  than  3  ppm  by  weight  of  1234yf  (2,3,3,3-Tetrafluoropropene), 
—  not  more  than  3  ppm  by  weight  of  1243zf  (3,3,3  Trifluoropropene), 
—  not  more  than  3  ppm  by  weight  of  1122a  (1-chloro-1,2-difluoroethylene), 
—  not  more  than  4,5  ppm  by  weight  of  1234yf+1122a+1243zf  (2,3,3,3-tetrafluor­
opropene,  +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene), 
—  not  more  than  3  ppm  by  weight  of  any  individual  unspecified/unknown  chemical, 
—  not  more  than  10  ppm  by  weight  of  all  unspecified/unknown  chemicals  combined, 
—  not  more  than  10  ppm  by  weight  of  Water, 
—  with  an  acidity  level  of  not  more  than  0,1  ppm  by  weight, 
—  without  Halides, 
—  not  more  than  0,01 %  by  volume  of  High  Boilers, 
—  without  any  odour  (no  malodour), 
for  further purification to  an  inhalation  grade  of  HFC  134a  produced  under  GMP  (Good 
02013R1387 
Manufacturing  Practice)  for  use  in  the  manufacture  of  a  propellant  for  medical  aerosols 
whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS 
RN  811-97-2) (2 ) 
0.2542 
ex 2903 39 27 
10 
1,1,1,3,3-Pentafluoropropane  (CAS  RN  460-73-1) 
0 % 
— 
31.12.2023 
— 
EN 
— 
01.07.2020 
0.2854 
ex 2903 39 28 
10 
Carbon  tetrafluoride  (tetrafluoromethane)  (CAS  RN  75-73-0) 
0 % 
— 
31.12.2023 
— 
0.2852 
ex 2903 39 28 
20 
Perfluoroethane  (CAS  RN  76-16-4) 
0 % 
— 
31.12.2023 
013.001 
0.6077 
ex 2903 39 29 
10 
1H-Perfluorohexane  (CAS  RN  355-37-3) 
0 % 
— 
31.12.2023 
— 
18
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5803 
2903 39 31 
2,3,3,3-Tetrafluoroprop-1-ene  (2,3,3,3-tetrafluoropropene)  (CAS  RN  754-12-1) 
0 % 
— 
31.12.2022 
0.4517 
ex 2903 39 35 
20 Trans-1,3,3,3-tetrafluoroprop-1-ene  (Trans-1,3,3,3-tetrafluoropropene)  (CAS  RN  29118- 
0 % 
— 
31.12.2023 
24-9) 
0.5472 
ex 2903 39 39 
10 
Perfluoro(4-methyl-2-pentene)  (CAS  RN  84650-68-0) 
0 % 
— 
31.12.2021 
0.6076 
ex 2903 39 39 
20 
(Perfluorobutyl)  ethylene  (CAS  RN  19430-93-4) 
0 % 
— 
31.12.2023 
0.4066 
ex 2903 39 39 
30 
Hexafluoropropene  (CAS  RN  116-15-4) 
0 % 
— 
31.12.2021 
0.7324 
ex 2903 39 39 
40 
1,1,2,3,4,4-hexafluorobuta-1,3-diene  (CAS  RN  685-63-2) 
0 % 
— 
31.12.2022 
▼M13 
0.7895 
ex 2903 72 00 
10 
Dichloro-1,1,1-trifluoroethane  (CAS  RN  306-83-2)  with  a  purity  by  weight  of  99 %  or 
0 % 
— 
31.12.2024 
more 
C3 
0.6610 
ex 2903 74 00 
10 
2-Chloro-1,1-difluoroethane  (CAS  RN  338-65-8) 
0 % 
— 
31.12.2020 
0.3675 
ex 2903 77 60 
10 
1,1,1-Trichlorotrifluoroethane  (CAS  RN  354-58-5) 
0 % 
— 
31.12.2023 
02013R1387 
0.5212 
ex 2903 77 90 
10 
Chlorotrifluoroethylene  (CAS  RN  79-38-9) 
0 % 
— 
31.12.2021 
0.7513 
ex 2903 78 00 
10 
Octafluoro-1,4-diiodobutane  (CAS  RN  375-50-8) 
0 % 
— 
31.12.2023 
— 
0.7755 
ex 2903 78 00 
20 
Trifluoroiodomethane  (CAS  RN  2314-97-8) 
0 % 
— 
31.12.2024 
EN 
0.6485 
ex 2903 79 30 
10 
Trans-1-chloro-3,3,3-trifluoropropene  (CAS  RN  102687-65-0) 
0 % 
— 
31.12.2024 
— 
▼M13 
01.07.2020 
0.7826 
ex 2903 79 30 
30 
1-Bromo-5-chloropentane  (CAS  RN  54512-75-3)  with  a  purity  by  weight  of  99 %  or 
0 % 
— 
31.12.2024 
more 
0.2583 
ex 2903 89 80 
45 
1,6,7,8,9,14,15,16,17,17,18,18-Dodecachlor opentacyclo  [12.2.1.16,9 .02,13 .05,10 ]octadeca- 
2 % 
— 
31.12.2021 
— 
7,15-diene  (CAS  RN  13560-89-9)  with  a  purity  by  weight  of  99 %  or  more 
013.001 
_____ 
C3 
— 
19
0.5765 
ex 2903 89 80 
50 
Chlorocyclopentane  (CAS  RN  930-28-9) 
0 % 
— 
31.12.2022 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7304 
ex 2903 89 80 
60 
Octafluorocyclobutane  (CAS  RN  115-25-3) 
0 % 
— 
31.12.2022 
0.6611 
ex 2903 99 80 
15 
4-Bromo-2-chloro-1-fluorobenzene  (CAS  RN  60811-21-4) 
0 % 
— 
31.12.2020 
0.3410 
ex 2903 99 80 
20 
1,2-Bis(pentabromophenyl)ethane  (CAS  RN  84852-53-9) 
0 % 
— 
31.12.2023 
0.3411 
ex 2903 99 80 
40 
2,6-Dichlorotoluene  (CAS  RN  118-69-4),  of  a  purity  by  weight  of  99 %  or  more  and 
0 % 
— 
31.12.2023 
containing: 
—  0,001  mg/kg  or  less  of  tetrachlorodibenzodioxines, 
—  0,001  mg/kg  or  less  of  tetrachlorodibenzofurans, 
—  0,2  mg/kg  or  less  of  tetrachlorobiphenyls 
0.4529 
ex 2903 99 80 
50 
Fluorobenzene  (CAS  RN  462-06-6) 
0 % 
— 
31.12.2023 
0.7351 
ex 2903 99 80 
60 
1,1'-methanediylbis(4-fluorobenzene)  (CAS  RN  457-68-1) 
0 % 
— 
31.12.2022 
02013R1387 
0.6235 
ex 2903 99 80 
75 
3-Chloro-alpha,alpha,alpha-trifluorotoluene  (CAS  RN  98-15-7) 
0 % 
— 
31.12.2024 
0.5917 
ex 2903 99 80 
80 
1-Bromo-3,4,5-trifluorobenzene  (CAS  RN  138526-69-9) 
0 % 
— 
31.12.2023 
— 
EN 
0.3407 
ex 2904 10 00 
30 
Sodium  p-styrenesulphonate  (CAS  RN  2695-37-6) 
0 % 
— 
31.12.2024 
— 
01.07.2020 
0.4686 
ex 2904 10 00 
50 
Sodium  2-methylprop-2-ene-1-sulphonate  (CAS  RN  1561-92-8) 
0 % 
— 
31.12.2024 
0.3409 
ex 2904 20 00 
10 
Nitromethane  (CAS  RN  75-52-5) 
0 % 
— 
31.12.2020 
— 
013.001 
0.3391 
ex 2904 20 00 
20 
Nitroethane  (CAS  RN  79-24-3) 
0 % 
— 
31.12.2020 
— 
0.3408 
ex 2904 20 00 
30 
1-Nitropropane  (CAS  RN  108-03-2) 
0 % 
— 
31.12.2020 
20
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3390 
ex 2904 20 00 
40 
2-Nitropropane  (CAS  RN  79-46-9) 
0 % 
— 
31.12.2024 
▼M13  _____ 
C3 
0.2526 
ex 2904 99 00 
20 
1-Chloro-2,4-dinitrobenzene  (CAS  RN  97-00-7) 
0 % 
— 
31.12.2024 
0.6612 
ex 2904 99 00 
25 
Difluoromethanesulphonyl  chloride  (CAS  RN  1512-30-7) 
0 % 
— 
31.12.2020 
0.3388 
ex 2904 99 00 
30 
Tosyl  chloride  (CAS  RN  98-59-9) 
0 % 
— 
31.12.2024 
0.6613 
ex 2904 99 00 
35 
1-Fluoro-4-nitrobenzene  (CAS  RN  350-46-9) 
0 % 
— 
31.12.2020 
0.5745 
ex 2904 99 00 
40 
4-Chlorobenzenesulphonyl  chloride  (CAS  RN  98-60-2) 
0 % 
— 
31.12.2022 
02013R1387 
0.7507 
ex 2904 99 00 
45 
2-Nitrobenzenesulfonyl  Chloride  (CAS  RN  1694-92-4) 
0 % 
— 
31.12.2023 
0.6001 
ex 2904 99 00 
50 
Ethanesulphonyl  chloride  (CAS  RN  594-44-5) 
0 % 
— 
31.12.2023 
— 
EN 
0.6407 
ex 2904 99 00 
60 
4,4'-Dinitrostilbene-2,2'-disulfonic  acid  (CAS  RN  128-42-7) 
0 % 
— 
31.12.2024 
— 
01.07.2020 
0.6270 
ex 2904 99 00 
70 
1-Chloro-4-nitrobenzene  (CAS  RN  100-00-5) 
0 % 
— 
31.12.2024 
0.6560 
ex 2904 99 00 
80 
1-Chloro-2-nitrobenzene  (CAS  RN  88-73-3) 
0 % 
— 
31.12.2024 
— 
013.001 
0.6186 
ex 2905 11 00 
10 
Methanol  (CAS  RN  67-56-1)  with  a  purity  of  99,85 %  by  weight  or  more 
0 % 
— 
31.12.2023 
0.7069 
ex 2905 11 00 
20 
Methyl  methanesulphonate  (CAS  RN  66-27-3) 
0 % 
— 
31.12.2021 
— 
ex 2905 19 00 
35 
21
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2967 
ex 2905 19 00 
11 
Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in 
0 % 
— 
31.12.2023 
tetrahydrofuran  according  to  note  1e)  to  Chapter  29  of  the  CN 
0.6118 
ex 2905 19 00 
20 
Butyltitanate  monohydrate,  homopolymer  (CAS  RN  162303-51-7) 
0 % 
— 
31.12.2023 
0.6119 
ex 2905 19 00 
25 
Tetra-(2-ethylhexyl)  titanate  (CAS  RN  1070-10-6) 
0 % 
— 
31.12.2023 
0.3384 
ex 2905 19 00 
30 
2,6-Dimethylheptan-4-ol  (CAS  RN  108-82-7) 
0 % 
— 
31.12.2023 
0.4793 
ex 2905 19 00 
40 
2,6-Dimethylheptan-2-ol  (CAS  RN  13254-34-7) 
0 % 
— 
31.12.2024 
0.5534 
ex 2905 19 00 
70 
Titanium  tetrabutanolate  (CAS  RN  5593-70-4) 
0 % 
— 
31.12.2022 
0.5533 
ex 2905 19 00 
80 
Titanium  tetraisopropoxide  (CAS  RN  546-68-9) 
0 % 
— 
31.12.2022 
02013R1387 
0.6002 
ex 2905 19 00 
85 
Titanium  tetraethanolate  (CAS  RN  3087-36-3) 
0 % 
— 
31.12.2023 
0.6464 
ex 2905 22 00 
10 
Linalool  (CAS  RN  78-70-6)  containing  by  weight  90,7 %  or  more  of  (3R)-(-)-Linalool 
0 % 
— 
31.12.2024 
(CAS  RN  126-91-0) 
— 
EN 
0.7114 
ex 2905 22 00 
20 
3,7-Dimethyloct-6-en-1-ol  (CAS  RN  106-22-9) 
0 % 
— 
31.12.2021 
— 
01.07.2020 
0.7388 
ex 2905 29 90 
10 
Cis-hex-3-en-1-ol  (CAS  RN  928-96-1) 
0 % 
— 
31.12.2022 
0.7674 
ex 2905 32 00 
10 
(2S)-propane-1,2-diol  (CAS  RN  4254-15-3) 
0 % 
— 
31.12.2023 
— 
013.001 
0.4934 
ex 2905 39 95 
10 
Propane-1,3-diol  (CAS  RN  504-63-2) 
0 % 
— 
31.12.2020 
— 
0.5249 
ex 2905 39 95 
20 
Butane-1,2-diol  (CAS  RN  584-03-2) 
0 % 
— 
31.12.2022 
22
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5255 
ex 2905 39 95 
30 
2,4,7,9-Tetramethyl-4,7-decanediol  (CAS  RN  17913-76-7) 
0 % 
— 
31.12.2021 
0.5847 
ex 2905 39 95 
40 
Decane-1,10-diol  (CAS  RN  112-47-0) 
0 % 
— 
31.12.2022 
0.5908 
ex 2905 39 95 
50 
2-Methyl-2-propylpropane-1,3-diol  (CAS  RN  78-26-2) 
0 % 
— 
31.12.2023 
0.7701 
ex 2905 39 95 
60 
Dodecane-1,12-diol  (CAS  RN  5675-51-4) 
0 % 
— 
31.12.2024 
▼M13 
0.7914 
ex 2905 39 95 
70 
2-methylpropane-1,3-diol (CAS RN 2163-42-0)  with a purity by weight of 98 % or more 
0 % 
— 
31.12.2024 
C3 
0.6724 
ex 2905 49 00 
10 
Ethylidynetrimethanol  (CAS  RN  77-85-0) 
0 % 
— 
31.12.2020 
0.4624 
ex 2905 59 98 
20 
2,2,2-Trifluoroethanol  (CAS  RN  75-89-8) 
0 % 
— 
31.12.2024 
02013R1387 
0.3378 
ex 2906 19 00 
10 
Cyclohex-1,4-ylenedimethanol  (CAS  RN  105-08-8) 
0 % 
— 
31.12.2023 
0.3380 
ex 2906 19 00 
20 
4,4'-Isopropylidenedicyclohexanol  (CAS  RN  80-04-6) 
0 % 
— 
31.12.2023 
0.6257 
ex 2906 19 00 
50 
4-tert-Butylcyclohexanol  (CAS  RN  98-52-2) 
0 % 
— 
31.12.2024 
— 
EN 
0.3681 
ex 2906 29 00 
20 
1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene  (CAS  RN  79538-03-7) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.5855 
ex 2906 29 00 
30 
2-Phenylethanol  (CAS  RN  60-12-8) 
0 % 
— 
31.12.2022 
0.6757 
ex 2906 29 00 
40 
2-Bromo-5-iodo-benzenemethanol  (CAS  RN  946525-30-0) 
0 % 
— 
31.12.2020 
— 
0.7373 
ex 2906 29 00 
50 
2,2'-(m-phenylene)dipropan-2-ol  (CAS  RN  1999-85-5) 
0 % 
— 
31.12.2022 
013.001 
0.7806 
ex 2906 29 00 
60 
3-[3-(Trifluoromethyl)phenyl]propan-1-ol  (CAS  RN  78573-45-2) 
0 % 
— 
31.12.2024 
— 
0.6329 
ex 2907 12 00 
20 
Mixture  of  meta-cresol  (CAS  RN  108-39-4)  and  para-cresol  (CAS  RN  106-44-5)  with  a 
0 % 
— 
31.12.2024 
purity  by  weight  of  99 %  or  more 
23
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6559 
ex 2907 12 00 
30 
p-Cresol  (CAS  RN  106-44-5) 
0 % 
— 
31.12.2024 
0.5216 
ex 2907 15 90 
10 
2-Naphthol  (CAS  RN  135-19-3) 
0 % 
— 
31.12.2021 
0.6256 
ex 2907 19 10 
10 
2,6-Xylenol  (CAS  RN  576-26-1) 
0 % 
— 
31.12.2024 
0.4480 
ex 2907 19 90 
20 
Biphenyl-4-ol  (CAS  RN  92-69-3) 
0 % 
— 
31.12.2023 
0.7753 
ex 2907 19 90 
30 
2-methyl-5-(propan-2-yl)phenol  (CAS  RN  499-75-2) 
0 % 
— 
31.12.2024 
0.3372 
ex 2907 21 00 
10 
Resorcinol  (CAS  RN  108-46-3) 
0 % 
— 
31.12.2023 
0.6026 
ex 2907 29 00 
15 
6,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol  (CAS  RN  85-60-9) 
0 % 
— 
31.12.2023 
02013R1387 
0.3369 
ex 2907 29 00 
20 
4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol  (CAS  RN  129188-99-4) 
0 % 
— 
31.12.2023 
0.6454 
ex 2907 29 00 
25 
4-Hydroxybenzyl  alcohol  (CAS  RN  623-05-2) 
0 % 
— 
31.12.2024 
— 
EN 
0.3367 
ex 2907 29 00 
30 
4,4',4"-Ethylidynetriphenol  (CAS  RN  27955-94-8) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.5432 
ex 2907 29 00 
45 
2-Methylhydroquinone  (CAS  RN  95-71-6) 
0 % 
— 
31.12.2021 
0.3368 
ex 2907 29 00 
50 
6,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol)  (CAS  RN  111850-25-0) 
0 % 
— 
31.12.2023 
— 
013.001 
0.6558 
ex 2907 29 00 
65 
2,2'-Methylenebis(6-cyclohexyl-p-cresol)  (CAS  RN  4066-02-8) 
0 % 
— 
31.12.2024 
0.2584 
ex 2907 29 00 
70 
2,2',2",6,6',6"-Hexa-tert-butyl-α,α',α"-(mesitylene-2,4,6-triyl)tri-p-cresol  (CAS  RN  1709- 
0 % 
— 
31.12.2023 
— 
70-2) 
24
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7402 
ex 2907 29 00 
75 
Biphenyl-4,4'-diol  (CAS  RN  92-88-6) 
0 % 
— 
31.12.2023 
0.3848 
ex 2907 29 00 
85 
Phloroglucinol  whether  or  not  hydrated 
0 % 
— 
31.12.2023 
0.5903 
ex 2908 19 00 
10 
Pentafluorophenol  (CAS  RN  771-61-9) 
0 % 
— 
31.12.2023 
0.5914 
ex 2908 19 00 
20 
4,4'-(Perfluoroisopropylidene)diphenol  (CAS  RN  1478-61-1) 
0 % 
— 
31.12.2023 
0.6260 
ex 2908 19 00 
30 
4-Chlorophenol  (CAS  RN  106-48-9) 
0 % 
— 
31.12.2024 
0.6782 
ex 2908 19 00 
40 
3,4,5-Trifluorophenol  (CAS  RN  99627-05-1) 
0 % 
— 
31.12.2020 
0.6915 
ex 2908 19 00 
50 
4-Fluorophenol  (CAS  RN  371-41-5) 
0 % 
— 
31.12.2020 
0.7720 
ex 2908 19 00 
60 
2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol  (CAS  RN  79-94-7) 
0 % 
— 
31.12.2024 
02013R1387 
0.3361 
ex 2909 19 90 
20 
Bis(2-chloroethyl)  ether  (CAS  RN  111-44-4) 
0 % 
— 
31.12.2023 
— 
0.3359 
ex 2909 19 90 
30 
Mixture  of  isomers  of  nonafluorobutyl  methyl  ether  or  nonafluorobutyl  ethyl  ether,  of  a 
0 % 
— 
31.12.2023 
purity  by  weight  of  99 %  or  more 
EN 
— 
0.4035 
ex 2909 19 90 
50 
3-Ethoxy-perfluoro-2-methylhexane  (CAS  RN  297730-93-9) 
0 % 
— 
31.12.2021 
01.07.2020 
0.5407 
ex 2909 20 00 
10 
8-Methoxycedrane  (CAS  RN  19870-74-7) 
0 % 
— 
31.12.2021 
— 
0.5503 
ex 2909 30 38 
20 
1,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] 
(CAS 
RN 
0 % 
— 
31.12.2021 
013.001 
21850-44-2) 
0.6649 
ex 2909 30 38 
30 
1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene 
0 % 
— 
31.12.2020 
— 
(CAS  RN  97416-84-7) 
25
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7454 
ex 2909 30 38 
40 
4-Benzyloxybromobenzene  (CAS  RN  6793-92-6) 
0 % 
— 
31.12.2023 
▼M13 
0.7828 
ex 2909 30 38 
50 
2-(1-Adamantyl)-4-Bromoanisole  (CAS  RN  104224-63-7)  with  a  purity  by  weight  of 
0 % 
— 
31.12.2024 
99 %  or  more 
C3 
0.4710 
ex 2909 30 90 
10 
2-(Phenylmethoxy)naphthalene  (CAS  RN  613-62-7) 
0 % 
— 
31.12.2024 
0.7176 
ex 2909 30 90 
15 
{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene  (CAS  RN  1092536-54-3) 
0 % 
— 
31.12.2021 
0.4711 
ex 2909 30 90 
20 
1,2-Bis(3-methyl-phenoxy)ethane  (CAS  RN  54914-85-1) 
0 % 
— 
31.12.2024 
0.7115 
ex 2909 30 90 
25 
1,2-Diphenoxyethane  (CAS  RN  104-66-5)  in  the  form  of  powder  or  as  an  aqueous 
0 % 
— 
31.12.2021 
dispersion  containing  by  weight  30 %  or  more  but  not  more  than  60 %  of  1,2-diphen­
oxyethane 
02013R1387 
0.5117 
ex 2909 30 90 
30 
3,4,5-Trimethoxytoluene  (CAS  RN  6443-69-2) 
0 % 
— 
31.12.2020 
0.7580 
ex 2909 30 90 
35 
1-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene  (CAS  RN  1103738-29-9) 
0 % 
— 
31.12.2023 
— 
0.6614 
ex 2909 30 90 
40 
1-Chloro-2,5-dimethoxybenzene  (CAS  RN  2100-42-7) 
0 % 
— 
31.12.2020 
EN 
— 
0.6783 
ex 2909 30 90 
50 
1-Ethoxy-2,3-difluorobenzene  (CAS  RN  121219-07-6) 
0 % 
— 
31.12.2020 
01.07.2020 
0.6784 
ex 2909 30 90 
60 
1-Butoxy-2,3-difluorobenzene  (CAS  RN  136239-66-2) 
0 % 
— 
31.12.2020 
0.6994 
ex 2909 30 90 
70 O,O,O-1,3,5-trimethylresorcinol  (CAS  RN  621-23-8) 
0 % 
— 
31.12.2021 
— 
0.7079 
ex 2909 30 90 
80 
Oxyfluorfen  (ISO)  (CAS  RN  42874-03-3)  with  a  purity  by  weight  of  97 %  or  more 
0 % 
— 
31.12.2021 
013.001 
0.7706 
ex 2909 44 00 
10 
2-Propoxyethanol  (CAS  RN  2807-30-9) 
0 % 
— 
31.12.2024 
— 
0.6927 
ex 2909 49 80 
10 
1-Propoxypropan-2-ol  (CAS  RN  1569-01-3) 
0 % 
— 
31.12.2020 
26
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3484 
ex 2909 50 00 
10 
4-(2-Methoxyethyl)phenol  (CAS  RN  56718-71-9) 
0 % 
— 
31.12.2023 
0.4911 
ex 2909 50 00 
20 
Ubiquinol  (CAS  RN  992-78-9) 
0 % 
— 
31.12.2020 
▼M13 
0.7846 
ex 2909 50 00 
40 
2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 
0 % 
— 
31.12.2024 
98 %  or  more 
C3 
0.3682 
ex 2909 60 00 
10 
Bis(α,α-dimethylbenzyl)  peroxide  (CAS  RN  80-43-3) 
0 % 
— 
31.12.2023 
0.6489 
ex 2909 60 00 
30 
3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane  (CAS  RN  24748-23-0),  dissolved  in 
0 % 
— 
31.12.2024 
isoparaffinic  hydrocarbons 
▼M13 
0.7910 
ex 2909 60 00 
50 
Solution  of  3,6,9-(ethyl  and/or  propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes  (CAS  RN 
0 % 
— 
31.12.2024 
1613243-54-1) in mineral spirits (CAS RN 1174522-09-8),  containing by weight 25 % or 
more,  but  not  more  than  41 %  of  the  hexoxonanes 
C3 
02013R1387 
0.7744 
ex 2910 90 00 
10 
2-[(2-Methoxyphenoxy)methyl]oxirane  (CAS  RN  2210-74-4) 
0 % 
— 
31.12.2024 
0.5940 
ex 2910 90 00 
15 
1,2-Epoxycyclohexane  (CAS  RN  286-20-4) 
0 % 
— 
31.12.2023 
0.7672 
ex 2910 90 00 
25 
Phenyloxirane  (CAS  RN  96-09-3) 
0 % 
— 
31.12.2023 
— 
0.2649 
ex 2910 90 00 
30 
2,3-Epoxypropan-1-ol  (glycidol)  (CAS  RN  556-52-5) 
0 % 
— 
31.12.2023 
EN 
— 
0.6660 
ex 2910 90 00 
50 
2,3-Epoxypropyl  phenyl  ether  (CAS  RN  122-60-1) 
0 % 
— 
31.12.2020 
01.07.2020 
0.4361 
ex 2910 90 00 
80 
Allyl  glycidyl  ether  (CAS  RN  106-92-3) 
0 % 
— 
31.12.2021 
0.6785 
ex 2911 00 00 
10 
Ethoxy-2,2-difluoroethanol  (CAS  RN  148992-43-2) 
0 % 
— 
31.12.2020 
0.7116 
ex 2912 19 00 
10 
Undecanal  (CAS  RN  112-44-7) 
0 % 
— 
31.12.2021 
— 
013.001 
0.6968 
ex 2912 29 00 
15 
2,6,6-Trimethylcyclohexenecarbaldehyde  (alpha-beta  isomers  mixture)  (CAS  RN  52844- 
0 % 
— 
31.12.2021 
21-0) 
0.6967 
ex 2912 29 00 
25 
Mixture  of  isomers  consisting  of: 
0 % 
— 
31.12.2021 
— 
—  85  (±  10)  %  by  weight  of  4-isobutyl-2-methylbenzaldehyde  (CAS  RN  73206-60-7), 
27
—  15  (±  10)  %  by  weight  of  2-isobutyl-4-methyllbenzaldehyde  (CAS  RN  68102-28-3) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7314 
ex 2912 29 00 
35 
Cinnamaldehyde  (CAS  RN  104-55-2) 
0 % 
— 
31.12.2022 
0.7405 
ex 2912 29 00 
45 
p-Phenylbenzaldehyde  (CAS  RN  3218-36-8) 
0 % 
— 
31.12.2022 
0.5755 
ex 2912 29 00 
50 
4-Isobutylbenzaldehyde  (CAS  RN  40150-98-9) 
0 % 
— 
31.12.2023 
0.7612 
ex 2912 29 00 
55 
Cyclohex-3-ene-1-carbaldehyde  (CAS  RN  100-50-5) 
0 % 
— 
31.12.2023 
0.6072 
ex 2912 29 00 
70 
4-tert-Butylbenzaldehyde  (CAS  RN  939-97-9) 
0 % 
— 
31.12.2023 
0.6073 
ex 2912 29 00 
80 
4-Isopropylbenzaldehyde  (CAS  RN  122-03-2) 
0 % 
— 
31.12.2023 
0.3479 
ex 2912 49 00 
10 
3-Phenoxybenzaldehyde  (CAS  RN  39515-51-0) 
0 % 
— 
31.12.2023 
0.5732 
ex 2912 49 00 
20 
4-Hydroxybenzaldehyde  (CAS  RN  123-08-0) 
0 % 
— 
31.12.2022 
02013R1387 
0.5135 
ex 2912 49 00 
30 
Salicylaldehyde  (CAS  RN  90-02-8) 
0 % 
— 
31.12.2020 
— 
0.6678 
ex 2912 49 00 
40 
3-Hydroxy-p-anisaldehyde  (CAS  RN  621-59-0) 
0 % 
— 
31.12.2020 
EN 
— 
0.7353 
ex 2912 49 00 
50 
2,6-dihydroxybenzaldehyde  (CAS  RN  387-46-2) 
0 % 
— 
31.12.2022 
01.07.2020 
0.7712 
ex 2913 00 00 
10 
2-Nitrobenzaldehyde  (CAS  RN  552-89-6) 
0 % 
— 
31.12.2024 
0.4228 
ex 2914 19 90 
20 
Heptan-2-one  (CAS  RN  110-43-0) 
0 % 
— 
31.12.2022 
— 
013.001 
0.4274 
ex 2914 19 90 
30 
3-Methylbutanone  (CAS  RN  563-80-4) 
0 % 
— 
31.12.2022 
— 
0.4275 
ex 2914 19 90 
40 
Pentan-2-one  (CAS  RN  107-87-9) 
0 % 
— 
31.12.2022 
28
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7554 
ex 2914 19 90 
60 
Zinc  acetylacetonate  (CAS  RN  14024-63-6) 
0 % 
— 
31.12.2023 
0.7568 
ex 2914 29 00 
15 
oestr-5(10)-ene-3,17-dione  (CAS  RN  3962-66-1) 
0 % 
— 
31.12.2023 
0.3475 
ex 2914 29 00 
20 
Cyclohexadec-8-enone  (CAS  RN  3100-36–5) 
0 % 
— 
31.12.2023 
0.7450 
ex 2914 29 00 
25 
Cyclohex-2-enone  (CAS  RN  930-68-7) 
0 % 
— 
31.12.2023 
0.4933 
ex 2914 29 00 
30 
(R)-p-Mentha-1(6),8-dien-2-one  (CAS  RN  6485-40-1) 
0 % 
— 
31.12.2020 
0.3480 
ex 2914 29 00 
40 
Camphor 
0 % 
— 
31.12.2023 
0.5389 
ex 2914 29 00 
50 trans-β-Damascone  (CAS  RN  23726-91-2) 
0 % 
— 
31.12.2021 
0.7422 
ex 2914 29 00 
70 
2-sec-butylcyclohexanone  (CAS  RN  14765-30-1) 
0 % 
— 
31.12.2022 
02013R1387 
0.7389 
ex 2914 29 00 
80 
1-(cedr-8-en-9-yl)ethanone  (CAS  RN  32388-55-9) 
0 % 
— 
31.12.2022 
— 
0.6265 
ex 2914 39 00 
15 
2,6-Dimethyl-1-indanone  (CAS  RN  66309-83-9) 
0 % 
— 
31.12.2024 
EN 
— 
0.6447 
ex 2914 39 00 
25 
1,3-Diphenylpropane-1,3-dione  (CAS  RN  120-46-7) 
0 % 
— 
31.12.2024 
01.07.2020 
0.4227 
ex 2914 39 00 
30 
Benzophenone  (CAS  RN  119-61-9) 
0 % 
— 
31.12.2022 
0.4429 
ex 2914 39 00 
50 
4-Phenylbenzophenone  (CAS  RN  2128-93-0) 
0 % 
— 
31.12.2023 
— 
013.001 
0.4428 
ex 2914 39 00 
60 
4-Methylbenzophenone  (CAS  RN  134-84-9) 
0 % 
— 
31.12.2023 
— 
0.5739 
ex 2914 39 00 
70 
Benzil  (CAS  RN  134-81-6) 
0 % 
— 
31.12.2022 
29
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5535 
ex 2914 39 00 
80 
4'-Methylacetophenone  (CAS  RN  122-00-9) 
0 % 
— 
31.12.2022 
▼M13 
0.7824 
ex 2914 50 00 
15 
1,1-dimethoxyacetone  (CAS  RN  6342-56-9)  with  a  purity  by  weight  of  98 %  or  more 
0 % 
— 
31.12.2024 
C3 
0.4932 
ex 2914 50 00 
20 
3'-Hydroxyacetophenone  (CAS  RN  121-71-1) 
0 % 
— 
31.12.2020 
0.5943 
ex 2914 50 00 
25 
4'-Methoxyacetophenone  (CAS  RN  100-06-1) 
0 % 
— 
31.12.2023 
0.7797 
ex 2914 50 00 
35 
2-Hydroxy-1-[4-[4-(2-hydroxy-2-methylpropanoyl)phenoxy]phenyl]-2-methylpropan-1- 
0 % 
— 
31.12.2024 
one  (CAS-RN  71868-15-0) 
0.5904 
ex 2914 50 00 
36 
2,7-Dihydroxy-9-fluorenone  (CAS  RN  42523-29-5) 
0 % 
— 
31.12.2023 
0.5435 
ex 2914 50 00 
40 
4-(4-Hydroxyphenyl)butan-2-one  (CAS  RN  5471-51-2) 
0 % 
— 
31.12.2021 
02013R1387 
0.5809 
ex 2914 50 00 
45 
3,4-Dihydroxybenzophenone  (CAS  RN  10425-11-3) 
0 % 
— 
31.12.2022 
0.4235 
ex 2914 50 00 
60 
2,2-Dimethoxy-2-phenylacetophenone  (CAS  RN  24650-42-8) 
0 % 
— 
31.12.2022 
— 
0.6591 
ex 2914 50 00 
65 
3-Methoxyacetophenone  (CAS  RN  586-37-8) 
0 % 
— 
31.12.2020 
EN 
— 
0.6762 
ex 2914 50 00 
75 
7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone  (CAS  RN  22009-38-7) 
0 % 
— 
31.12.2020 
01.07.2020 
0.4385 
ex 2914 50 00 
80 
2',6'-Dihydroxyacetophenone  (CAS  RN  699-83-2) 
0 % 
— 
31.12.2023 
0.7075 
ex 2914 50 00 
85 
4,4'-Dihydroxybenzophenone  (CAS  RN  611-99-4) 
0 % 
— 
31.12.2021 
— 
0.2647 
ex 2914 69 80 
10 
2-Ethylanthraquinone  (CAS  RN  84-51-5) 
0 % 
— 
31.12.2023 
013.001 
0.2643 
ex 2914 69 80 
30 
1,4-Dihydroxyanthraquinone  (CAS  RN  81-64-1) 
0 % 
— 
31.12.2023 
— 
0.5430 
ex 2914 69 80 
40 
p-Benzoquinone  (CAS  RN  106-51-4) 
0 % 
— 
31.12.2021 
30
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6481 
ex 2914 69 80 
50 
Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1- 
0 % 
— 
31.12.2024 
dimethylpropyl)anthraquinone  (CAS  RN  32588-54-8) 
0.6592 
ex 2914 79 00 
15 
1-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione  (CAS  RN  720-94-5) 
0 % 
— 
31.12.2020 
0.7736 
ex 2914 79 00 
18 
2-Chloro-1-cyclopropylethanone  (CAS  RN  7379-14-8) 
0 % 
— 
31.12.2024 
0.5782 
ex 2914 79 00 
20 
2,4'-Difluorobenzophenone  (CAS  RN  342-25-6) 
0 % 
— 
31.12.2022 
0.7732 
ex 2914 79 00 
23 
5-Chloro-2-hydroxybenzophenone  (CAS  RN  85-19-8) 
0 % 
— 
31.12.2024 
0.6596 
ex 2914 79 00 
25 
1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone  (CAS  RN  1378387-81-5) 
0 % 
— 
31.12.2020 
0.7751 
ex 2914 79 00 
27 
(2-Chloro-5-iodo-phenyl)-(4-fluoro-phenyl)-methanone  (CAS  RN  915095-86-2) 
0 % 
— 
31.12.2024 
02013R1387 
0.7467 
ex 2914 79 00 
30 
5-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one  (CAS  RN  61718-80-7) 
0 % 
— 
31.12.2023 
0.7442 
ex 2914 79 00 
35 
1-[4-(benzyloxy)phenyl]-2-bromopropan-1-one  (CAS  RN  35081-45-9) 
0 % 
— 
31.12.2023 
— 
0.3474 
ex 2914 79 00 
40 
Perfluoro(2-methylpentan-3-one)  (CAS  RN  756-13-8) 
0 % 
— 
31.12.2023 
EN 
— 
0.2640 
ex 2914 79 00 
50 
3'-Chloropropiophenone  (CAS  RN  34841-35-5) 
0 % 
— 
31.12.2023 
01.07.2020 
0.4948 
ex 2914 79 00 
60 
4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone  (CAS  RN  81-14-1) 
0 % 
— 
31.12.2020 
— 
0.7072 
ex 2914 79 00 
65 
1,4-bis(4-Fluorobenzoyl)  Benzene  (CAS  RN  68418-51-9) 
0 % 
— 
31.12.2021 
013.001 
0.5237 
ex 2914 79 00 
70 
4-Chloro-4'-hydroxybenzophenone  (CAS  RN  42019-78-3) 
0 % 
— 
31.12.2021 
— 
0.7082 
ex 2914 79 00 
75 
4,4'-Difluorobenzophenone  (CAS  RN  345-92-6) 
0 % 
— 
31.12.2021 
31
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6120 
ex 2914 79 00 
80 
Tetrachloro-p-benzoquinone  (CAS  RN  118-75-2) 
0 % 
— 
31.12.2023 
0.7214 
ex 2915 12 00 
10 
Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium 
0 % 
— 
31.12.2021 
formate  (CAS  RN  3495-36-1) 
0.7433 
ex 2915 39 00 
10 
Cis-3-hexenyl  acetate  (CAS  RN  3681-71-8) 
0 % 
— 
31.12.2022 
0.6155 
ex 2915 39 00 
25 
2-Methylcyclohexyl  acetate  (CAS  RN  5726-19-2) 
0 % 
— 
31.12.2023 
0.7423 
ex 2915 39 00 
30 
4-tert-butylcyclohexyl  acetate  (CAS  RN  32210-23-4) 
0 % 
— 
31.12.2022 
0.2957 
ex 2915 39 00 
40 tert-Butyl  acetate  (CAS  RN  540-88-5) 
0 % 
— 
31.12.2023 
0.5119 
ex 2915 39 00 
60 
Dodec-8-enyl  acetate  (CAS  RN  28079-04-1) 
0 % 
— 
31.12.2020 
0.5121 
ex 2915 39 00 
65 
Dodeca-7,9-dienyl  acetate  (CAS  RN  54364-62-4) 
0 % 
— 
31.12.2020 
0.5120 
ex 2915 39 00 
70 
Dodec-9-enyl  acetate  (CAS  RN  16974-11-1) 
0 % 
— 
31.12.2020 
02013R1387 
0.5289 
ex 2915 39 00 
75 
Isobornyl  acetate  (CAS  RN  125-12-2) 
0 % 
— 
31.12.2021 
0.5301 
ex 2915 39 00 
80 
1-Phenylethyl  acetate  (CAS  RN  93-92-5) 
0 % 
— 
31.12.2021 
0.5909 
ex 2915 39 00 
85 
2-tert-Butylcyclohexyl  acetate  (CAS  RN  88-41-5) 
0 % 
— 
31.12.2023 
— 
EN 
▼M13 
— 
0.7834 
ex 2915 40 00 
10 
Ethyl  trichloroacetate  (CAS  RN  515-84-4)  with  a  purity  by  weight  of  98 %  or  more 
0 % 
— 
31.12.2024 
01.07.2020 
0.7830 
ex 2915 40 00 
20 
Sodium  trichloroacetate  (CAS  RN  650-51-1)  with  a  purity  by  weight  of  96 %  or  more 
0 % 
— 
31.12.2024 
C3 
— 
013.001 
0.5858 
ex 2915 60 19 
10 
Ethyl  butyrate  (CAS  RN  105-54-4) 
0 % 
— 
31.12.2022 
0.7540 
ex 2915 70 40 
10 
Methyl  palmitate  (CAS  RN  112-39-0) 
0 % 
— 
31.12.2023 
— 
0.7541 
ex 2915 90 30 
10 
Methyl  laurate  (CAS  RN  111-82-0) 
0 % 
— 
31.12.2020 
32
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7899 
ex 2915 90 70 
18 
Myristitic  acid,  lithium  salt  (CAS  RN  20336-96-3)  with  a  purity  by  weight  of  95 %  or 
0 % 
— 
31.12.2024 
more 
C3 
0.7407 
ex 2915 90 70 
20 
Methyl  (R)-2-fluoropropionate  (CAS  RN  146805-74-5) 
0 % 
— 
31.12.2022 
0.7542 
ex 2915 90 70 
25 
Methyl  octanoate  (CAS  RN  111-11-5),  methyl  decanoate  (CAS  RN  110-42-9)  or  methyl 
0 % 
— 
31.12.2023 
myristate  (CAS  RN  124-10-7) 
0.5767 
ex 2915 90 70 
30 
3,3-Dimethylbutyryl  chloride  (CAS  RN  7065-46-5) 
0 % 
— 
31.12.2022 
0.5536 
ex 2915 90 70 
35 
2,2-Dimethylbutanoyl  chloride  (CAS  RN  5856-77-9) 
0 % 
— 
31.12.2023 
0.6255 
ex 2915 90 70 
45 
Trimethyl  orthoformate  (CAS  RN  149-73-5) 
0 % 
— 
31.12.2024 
0.4791 
ex 2915 90 70 
50 
Allyl  heptanoate  (CAS  RN  142-19-8) 
0 % 
— 
31.12.2024 
02013R1387 
0.6003 
ex 2915 90 70 
55 
Triethyl  orthoformate  (CAS  RN  122-51-0) 
0 % 
— 
31.12.2023 
0.4954 
ex 2915 90 70 
60 
Ethyl-6,8-dichlorooctanoate  (CAS  RN  1070-64-0) 
0 % 
— 
31.12.2020 
— 
EN 
0.6914 
ex 2915 90 70 
65 
2-Ethyl-2-methyl  butanoic  acid  (CAS  RN  19889-37-3) 
0 % 
— 
31.12.2020 
— 
0.5217 
ex 2915 90 70 
80 
Ethyl  difluoroacetate  (CAS  RN  454-31-9) 
0 % 
— 
31.12.2021 
01.07.2020 
0.2585 
ex 2916 12 00 
10 
2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 
0 % 
— 
31.12.2023 
61167-58-6) 
— 
0.3977 
ex 2916 12 00 
40 
2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 
0 % 
— 
31.12.2023 
013.001 
123968-25-2) 
0.5808 
ex 2916 12 00 
70 
2-(2-Vinyloxyethoxy)ethyl  acrylate  (CAS  RN  86273-46-3) 
0 % 
— 
31.12.2022 
— 
0.3468 
ex 2916 13 00 
20 
Zinc  dimethacrylate,  in  the  form  of  powder  (CAS  RN  13189-00-9) 
0 % 
— 
31.12.2023 
33
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3466 
ex 2916 13 00 
30 
Zinc  monomethacrylate  powder  (CAS  RN  63451-47-8)  whether  or  not  containing  not 
0 % 
— 
31.12.2020 
more  than  17 %  by  weight  of  manufacturing  impurities 
0.2638 
ex 2916 14 00 
10 
2,3-Epoxypropyl  methacrylate  (CAS  RN  106-91-2) 
0 % 
— 
31.12.2023 
0.6190 
ex 2916 14 00 
20 
Ethyl  methacrylate  (CAS  RN  97-63-2) 
0 % 
— 
31.12.2023 
0.2951 
ex 2916 19 95 
20 
Methyl  3,3-dimethylpent-4-enoate  (CAS  RN  63721-05-1) 
0 % 
— 
31.12.2023 
0.5991 
ex 2916 19 95 
40 
Sorbic  acid  (CAS  RN  110-44-1)  for  use  in  the  manufacture  of  animal  feeds (2 ) 
0 % 
— 
31.12.2023 
0.6238 
ex 2916 19 95 
50 
Methyl  2-fluoroacrylate  (CAS  RN  2343-89-7) 
0 % 
— 
31.12.2024 
0.7023 
ex 2916 20 00 
15 
Transfluthrin  (ISO)  (CAS  RN  118712-89-3) 
0 % 
— 
31.12.2021 
02013R1387 
0.7437 
ex 2916 20 00 
20 
Mixture 
of 
the 
(1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers 
of 
ethyl 
0 % 
— 
31.12.2022 
tricyclo[5.2.1.0(2,6)]decane-2-carboxylate  (CAS  RNs  80657-64-3  and  80623-07-0) 
0.3463 
ex 2916 20 00 
50 
Ethyl  2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate  (CAS  RN  97-41-6) 
0 % 
— 
31.12.2023 
— 
EN 
0.4931 
ex 2916 20 00 
60 
3-Cyclohexylpropionic  acid  (CAS  RN  701-97-3) 
0 % 
— 
31.12.2020 
— 
01.07.2020 
0.7531 
ex 2916 20 00 
70 
Cyclopropanecarbonyl  chloride  (CAS  RN  4023-34-1) 
0 % 
— 
31.12.2023 
0.5421 
ex 2916 31 00 
10 
Benzyl  benzoate  (CAS  RN  120-51-4) 
0 % 
— 
31.12.2021 
— 
013.001 
0.6248 
ex 2916 39 90 
13 
3,5-Dinitrobenzoic  acid  (CAS  RN  99-34-3) 
0 % 
— 
31.12.2024 
— 
0.5214 
ex 2916 39 90 
15 
2-Chloro-5-nitrobenzoic  acid  (CAS  RN  2516-96-3) 
0 % 
— 
31.12.2021 
34
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2636 
ex 2916 39 90 
20 
3,5-Dichlorobenzoyl  chloride  (CAS  RN  2905-62-6) 
0 % 
— 
31.12.2023 
▼M13 
0.7845 
ex 2916 39 90 
22 
6-bromo-2-fluoro-3-(trifluoromethyl)benzoic  acid  (CAS  RN  1026962-68-4)  with  a  purity 
0 % 
— 
31.12.2024 
by  weight  of  95 %  or  more 
C3 
0.6557 
ex 2916 39 90 
23 
(2,4,6-Trimethylphenyl)acetyl  chloride  (CAS  RN  52629-46-6) 
0 % 
— 
31.12.2024 
0.4951 
ex 2916 39 90 
25 
2-Methyl-3-(4-Fluorophenyl)-propionyl  chloride  (CAS  RN  1017183-70-8) 
0 % 
— 
31.12.2021 
▼M13 
0.7827 
ex 2916 39 90 
27 
Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or 
0 % 
— 
31.12.2024 
more 
C3 
0.4930 
ex 2916 39 90 
30 
2,4,6-Trimethylbenzoyl  chloride  (CAS  RN  938-18-1) 
0 % 
— 
31.12.2020 
02013R1387 
0.7187 
ex 2916 39 90 
33 
Methyl  4'-(bromomethyl)biphenyl-2-carboxylate  (CAS  RN  114772-38-2) 
0 % 
— 
31.12.2021 
0.5944 
ex 2916 39 90 
35 
Methyl  4-tert-butylbenzoate  (CAS  RN  26537-19-9) 
0 % 
— 
31.12.2023 
0.6794 
ex 2916 39 90 
41 
4-Bromo-2,6-difluorobenzoyl  chloride  (CAS  RN  497181-19-8) 
0 % 
— 
31.12.2020 
— 
0.7734 
ex 2916 39 90 
43 
2-(3,5-Bis(trifluoromethyl)phenyl)-2-methylpropanoic  acid  (CAS  RN  289686-70-0) 
0 % 
— 
31.12.2024 
EN 
— 
0.6121 
ex 2916 39 90 
48 
3-Fluorobenzoyl  chloride  (CAS  RN  1711-07-5) 
0 % 
— 
31.12.2023 
01.07.2020 
0.2634 
ex 2916 39 90 
50 
3,5-Dimethylbenzoyl  chloride  (CAS  RN  6613-44-1) 
0 % 
— 
31.12.2023 
0.6755 
ex 2916 39 90 
51 
3-Chloro-2-fluorobenzoic  acid  (CAS  RN  161957-55-7) 
0 % 
— 
31.12.2020 
— 
0.6661 
ex 2916 39 90 
53 
5-Iodo-2-methylbenzoic  acid  (CAS  RN  54811-38-0) 
0 % 
— 
31.12.2020 
013.001 
0.4238 
ex 2916 39 90 
55 
4-tert-Butylbenzoic  acid  (CAS  RN  98-73-7) 
0 % 
— 
31.12.2022 
0.7678 
ex 2916 39 90 
57 
2-Phenylprop-2-enoic  acid  (CAS  RN  492-38-6) 
0 % 
— 
31.12.2023 
— 
35
0.6803 
ex 2916 39 90 
61 
2-Phenylbutyric  Acid  (CAS  RN  90-27-7) 
0 % 
— 
31.12.2020 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3462 
ex 2916 39 90 
70 
Ibuprofen  (INN)  (CAS  RN  15687-27-1) 
0 % 
— 
31.12.2023 
0.7117 
ex 2916 39 90 
73 
(2,4-Dichlorophenyl)acetyl  chloride  (CAS  RN  53056-20-5) 
0 % 
— 
31.12.2021 
0.5541 
ex 2916 39 90 
75 
m-Toluic  acid  (CAS  RN  99-04-7) 
0 % 
— 
31.12.2022 
0.5543 
ex 2916 39 90 
85 
(2,4,5-Trifluorophenyl)acetic  acid  (CAS  RN  209995-38-0) 
0 % 
— 
31.12.2022 
0.3457 
ex 2917 11 00 
20 
Bis(p-methylbenzyl)  oxalate  (CAS  RN  18241-31-1) 
0 % 
— 
31.12.2023 
0.4746 
ex 2917 11 00 
30 
Cobalt  oxalate  (CAS  RN  814-89-1) 
0 % 
— 
31.12.2024 
0.7563 
ex 2917 12 00 
20 
Bis(3,4-epoxycyclohexylmethyl)  adipate  (CAS  RN  3130-19-6) 
0 % 
— 
31.12.2023 
0.4684 
ex 2917 19 10 
10 
Dimethyl  malonate  (CAS  RN  108-59-8) 
0 % 
— 
31.12.2024 
0.5602 
ex 2917 19 10 
20 
Diethyl  malonate  (CAS  RN  105-53-3) 
0 % 
— 
31.12.2022 
02013R1387 
0.6089 
ex 2917 19 80 
15 
Dimethyl  but-2-ynedioate  (CAS  RN  762-42-5) 
0 % 
— 
31.12.2023 
0.4790 
ex 2917 19 80 
30 
Ethylene  brassylate  (CAS  RN  105-95-3) 
0 % 
— 
31.12.2024 
0.7451 
ex 2917 19 80 
35 
Diethyl  methylmalonate  (CAS  RN  609-08-5) 
0 % 
— 
31.12.2023 
— 
EN 
▼M13 
— 
01.07.2020 
0.7880 
ex 2917 19 80 
45 
Iron  fumarate  (CAS  RN  141-01-5)  with  a  purity  by  weight  of  93 %  or  more 
0 % 
— 
31.12.2024 
C3 
— 
0.4918 
ex 2917 19 80 
50 
Tetradecanedioic  acid  (CAS  RN  821-38-5) 
0 % 
— 
31.12.2020 
013.001 
0.3454 
ex 2917 19 80 
70 
Itaconic  acid  (CAS  RN  97-65-4) 
0 % 
— 
31.12.2023 
— 
0.2631 
ex 2917 20 00 
30 
1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115- 
0 % 
— 
31.12.2023 
27-5) 
36
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2627 
ex 2917 20 00 
40 
3-Methyl-1,2,3,6-tetrahydrophthalic  anhydride  (CAS  RN  5333-84-6) 
0 % 
— 
31.12.2023 
0.2954 
ex 2917 34 00 
10 
Diallyl  phthalate  (CAS  RN  131-17-9) 
0 % 
— 
31.12.2023 
0.4945 
ex 2917 39 95 
20 
Dibutyl-1,4-benzenedicarboxylate  (CAS  RN  1962-75-0) 
0 % 
— 
31.12.2020 
0.6796 
ex 2917 39 95 
25 
Naphthalene-1,8-dicarboxylic  anhydride  (CAS  RN  81-84-5) 
0 % 
— 
31.12.2020 
0.3640 
ex 2917 39 95 
30 
Benzene-1,2:4,5-tetracarboxylic  dianhydride  (CAS  RN  89-32-7) 
0 % 
— 
31.12.2020 
0.6800 
ex 2917 39 95 
35 
1-Methyl-2-nitroterephthalate  (CAS  RN  35092-89-8) 
0 % 
— 
31.12.2020 
0.6123 
ex 2917 39 95 
40 
Dimethyl  2-nitroterephthalate  (CAS  RN  5292-45-5) 
0 % 
— 
31.12.2023 
02013R1387 
0.6553 
ex 2917 39 95 
50 
1,4,5,8-Naphthalenetetracarboxylic  acid-1,8-monoanhydride  (CAS  RN  52671-72-4) 
0 % 
— 
31.12.2024 
0.6554 
ex 2917 39 95 
60 
Perylene-3,4:9,10-tetracarboxylic  dianhydride  (CAS  RN  128-69-8) 
0 % 
— 
31.12.2024 
— 
EN 
0.6366 
ex 2918 19 30 
10 
Cholic  acid  (CAS  RN  81-25-4) 
0 % 
— 
31.12.2024 
— 
01.07.2020 
0.6367 
ex 2918 19 30 
20 
3-α,12-α-Dihydroxy-5-β-cholan-24-oic  acid  (deoxycholic  acid)  (CAS  RN  83-44-3) 
0 % 
— 
31.12.2024 
0.2950 
ex 2918 19 98 
20 
L-Malic  acid  (CAS  RN  97-67-6) 
0 % 
— 
31.12.2023 
— 
013.001 
0.7702 
ex 2918 19 98 
30 
Ethyl  1-hydroxycyclopentanecarboxylate  (CAS  RN  41248-23-1) 
0 % 
— 
31.12.2024 
— 
0.7703 
ex 2918 19 98 
40 
Ethyl  1-hydroxycyclohexanecarboxylate  (CAS  RN  1127-01-1) 
0 % 
— 
31.12.2024 
37
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7907 
ex 2918 19 98 
50 
12-Hydroxyoctadecanoic  acid  (CAS  RN  106-14-9)  with  a  purity  by  weight  of  90 %  or 
0 % 
— 
31.12.2024 
more  for  the  manufacture  of  polyglycerin-poly-12-hydroxyoctadecanoic  acid  esters (2 ) 
C3 
0.3637 
ex 2918 29 00 
10 
Monohydroxynaphthoic  acids 
0 % 
— 
31.12.2023 
0.5781 
ex 2918 29 00 
35 
Propyl  3,4,5-trihydroxybenzoate  (CAS  RN  121-79-9) 
0 % 
— 
31.12.2022 
0.3638 
ex 2918 29 00 
50 
Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) 
0 % 
— 
31.12.2023 
0.5220 
ex 2918 29 00 
60 
Methyl-,  ethyl-,  propyl-  or  butyl  esters  of  4-hydroxybenzoic  acid  or  their  sodium  salts 
0 % 
— 
31.12.2021 
(CAS  RN  35285-68-8,  99-76-3,  5026-62-0,  94-26-8,  94-13-3,  35285-69-9,  120-47-8, 
36457-20-2  or  4247-02-3) 
0.6456 
ex 2918 29 00 
70 
3,5-Diiodosalicylic  acid  (CAS  RN  133-91-5) 
0 % 
— 
31.12.2024 
0.7344 
ex 2918 30 00 
15 
2-fluoro-5-formylbenzoic  acid  (CAS  RN  550363-85-4) 
0 % 
— 
31.12.2022 
0.7605 
ex 2918 30 00 
25 
(E)-1-ethoxy-3-oxobut-1-en-1-olate;  2-methylpropan-1-olate;  titanium(4+)  (CAS  RN 
0 % 
— 
31.12.2023 
02013R1387 
83877-91-2) 
0.4427 
ex 2918 30 00 
30 
Methyl-2-benzoylbenzoate  (CAS  RN  606-28-0) 
0 % 
— 
31.12.2023 
▼M13 
— 
0.7864 
ex 2918 30 00 
35 
3-Oxocyclobutane-1-carboxylic  acid  with  a  purity  by  weight  of  98 %  or  more  (CAS  RN 
0 % 
— 
31.12.2024 
EN 
23761-23-1) 
— 
C3 
01.07.2020 
0.5857 
ex 2918 30 00 
50 
Ethyl  acetoacetate  (CAS  RN  141-97-9) 
0 % 
— 
31.12.2022 
0.6250 
ex 2918 30 00 
60 
4-Oxovaleric  acid  (CAS  RN  123-76-2) 
0 % 
— 
31.12.2024 
— 
0.6455 
ex 2918 30 00 
70 
2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic  acid  (CAS  RN  68592-12-1) 
0 % 
— 
31.12.2024 
013.001 
0.7062 
ex 2918 30 00 
80 
Methyl  benzoylformate  (CAS  RN  15206-55-0) 
0 % 
— 
31.12.2021 
0.2946 
ex 2918 99 90 
10 
3,4-Epoxycyclohexylmethyl  3,4-epoxycyclohexanecarboxylate  (CAS  RN  2386-87-0) 
0 % 
— 
31.12.2023 
— 
38
0.6814 
ex 2918 99 90 
13 
3-Methoxy-2-methylbenzoyl  chloride  (CAS  RN  24487-91-0) 
0 % 
— 
31.12.2020 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5856 
ex 2918 99 90 
15 
Ethyl  2,3-epoxy-3-phenylbutyrate  (CAS  RN  77-83-8) 
0 % 
— 
31.12.2022 
0.6901 
ex 2918 99 90 
18 
Ethyl  2-hydroxy-2-(4-phenoxyphenyl)propanoate  (CAS  RN  132584-17-9) 
0 % 
— 
31.12.2020 
0.2949 
ex 2918 99 90 
20 
Methyl  3-methoxyacrylate  (CAS  RN  5788-17-0) 
0 % 
— 
31.12.2024 
0.6983 
ex 2918 99 90 
23 
1,8-Dihydroxyanthraquinone-3-carboxylic  acid  (CAS  RN  478-43-3) 
0 % 
— 
31.12.2021 
0.6147 
ex 2918 99 90 
25 
Methyl  (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate  (CAS  RN  117428-51-0) 
0 % 
— 
31.12.2023 
0.7256 
ex 2918 99 90 
27 
Ethyl  3-ethoxypropionate  (CAS  RN  763-69-9) 
0 % 
— 
31.12.2022 
0.2948 
ex 2918 99 90 
30 
Methyl  2-(4-hydroxyphenoxy)propionate  (CAS  RN  96562-58-2) 
0 % 
— 
31.12.2023 
02013R1387 
0.7597 
ex 2918 99 90 
33 
Vanillic  Acid  (CAS  RN  121-34-6)  containing: 
0 % 
— 
31.12.2023 
—  not  more  than  10  ppm  of  Palladium  (CAS  RN  7440-05-3), 
—  not  more  than  10  ppm  of  bismuth  (CAS  RN  7440-69-9), 
—  not  more  than  14  ppm  of  formaldehyde  (CAS  RN  50-00-0), 
—  not  more  than  1,3 %  by  weight  of  3,4-dihydroxybenzoic  acid  (CAS  RN  99-50-3), 
—  not  more  than  0,5 %  by  weight  of  vanillin  (CAS  RN  121-33-5) 
— 
EN 
0.6342 
ex 2918 99 90 
35 
p-Anisic  acid  (CAS  RN  100-09-4) 
0 % 
— 
31.12.2024 
— 
01.07.2020 
0.7358 
ex 2918 99 90 
38 
Diclofop-methyl  (ISO)  (CAS  RN  51338-27-3) 
0 % 
— 
31.12.2022 
0.2945 
ex 2918 99 90 
40 trans-4-Hydroxy-3-methoxycinnamic  acid  (CAS  RN  1135-24-6) 
0 % 
— 
31.12.2023 
— 
013.001 
0.6224 
ex 2918 99 90 
45 
4-Methylcatechol  dimethyl  acetate  (CAS  RN  52589-39-6) 
0 % 
— 
31.12.2024 
— 
0.2947 
ex 2918 99 90 
50 
Methyl  3,4,5-trimethoxybenzoate  (CAS  RN  1916-07-0) 
0 % 
— 
31.12.2023 
39
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6552 
ex 2918 99 90 
55 
Stearyl  glycyrrhetinate(CAS  RN  13832-70-7) 
0 % 
— 
31.12.2024 
0.2943 
ex 2918 99 90 
60 
3,4,5-Trimethoxybenzoic  acid  (CAS  RN  118-41-2) 
0 % 
— 
31.12.2023 
0.6523 
ex 2918 99 90 
65 
Acetic  acid,  difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-,  ammonium  salt 
0 % 
— 
31.12.2024 
(CAS  RN  908020-52-0) 
0.4742 
ex 2918 99 90 
70 
Allyl-(3-methylbutoxy)acetate  (CAS  RN  67634-00-8) 
0 % 
— 
31.12.2024 
0.5496 
ex 2918 99 90 
80 
Sodium  5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate  (CAS  RN  62476-59-9) 
0 % 
— 
31.12.2021 
0.6747 
ex 2918 99 90 
85 
Trinexapac-Ethyl (ISO) (CAS  RN  95266-40-3)  with  a  purity  by  weight  of  96 %  or more 
0 % 
— 
31.12.2020 
▼M13 
0.2942 
ex 2919 90 00 
35 
2,2'-Methylenebis(4,6-di-tert-butylphenyl)  phosphate,  monosodium  salt  (CAS  RN  85209- 
0 % 
— 
31.12.2023 
91-2) with a purity by weight of 95 % or more, with particles greater than 100 μm used in 
the manufacture of nucleating agents with a particle size (D90) no  greater than 35 μm as 
02013R1387 
measured  by  a  light  scattering  technique (2 ) 
C3 
0.7462 
ex 2919 90 00 
15 
Benzene-1,3-diyl  tetraphenyl  bis(phosphate)  (CAS  RN  57583-54-7) 
0 % 
— 
31.12.2023 
— 
EN 
0.7723 
ex 2919 90 00 
25 
Triphenyl  phosphate  (CAS  RN  115-86-6) 
0 % 
— 
31.12.2024 
— 
01.07.2020 
0.2940 
ex 2919 90 00 
30 
Aluminium  hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate]  (CAS  RN 
0 % 
— 
31.12.2023 
151841-65-5) 
0.3867 
ex 2919 90 00 
40 
Tri-n-hexylphosphate  (CAS  RN  2528-39-4) 
0 % 
— 
31.12.2023 
— 
0.5495 
ex 2919 90 00 
50 
Triethyl  phosphate  (CAS  RN  78-40-0) 
0 % 
— 
31.12.2021 
013.001 
0.6188 
ex 2919 90 00 
60 
Bisphenol-A  bis(diphenyl  phosphate)  (CAS  RN  5945-33-5) 
0 % 
— 
31.12.2023 
— 
0.6413 
ex 2919 90 00 
70 
Tris(2-butoxyethyl)phosphate  (CAS  RN  78-51-3) 
0 % 
— 
31.12.2024 
40
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2938 
ex 2920 19 00 
10 
Fenitrothion  (ISO)  (CAS  RN  122-14-5) 
0 % 
— 
31.12.2023 
0.2941 
ex 2920 19 00 
20 
Tolclofos-methyl  (ISO)  (CAS  RN  57018-04-9) 
0 % 
— 
31.12.2023 
0.6253 
ex 2920 19 00 
30 
2,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide  (CAS RN  4090-51-1) 
0 % 
— 
31.12.2024 
0.3634 
2920 23 00 
Trimethyl  phosphite  (CAS  RN  121-45-9) 
0 % 
— 
31.12.2023 
0.4158 
2920 24 00 
Triethyl  phosphite  (CAS  RN  122-52-1) 
0 % 
— 
31.12.2021 
0.2626 
ex 2920 29 00 
10 O,O'-Dioctadecyl  pentaerythritol  bis(phosphite)  (CAS  RN  3806-34-6) 
0 % 
— 
31.12.2023 
0.7227 
ex 2920 29 00 
15 
Phosphorous  acid  3,3',5,5'-tetrakis(1,1-dimethylethyl)-6,6'-dimethyl[1,1'-biphenyl]-2,2'- 
0 % 
— 
31.12.2022 
diyl  tetra-1-naphthalenyl  ester  (CAS  RN  198979-98-5) 
0.5038 
ex 2920 29 00 
20 
Tris(methylphenyl)phosphite  (CAS  RN  25586-42-9) 
0 % 
— 
31.12.2020 
0.5123 
ex 2920 29 00 
30 
2,2'-[[3,3',5,5'-Tetrakis(1,1-dimethylethyl)[1,1'-biphenyl]-2,2'-diyl]bis(oxy)]bis[biphenyl- 
0 % 
— 
31.12.2020 
02013R1387 
1,3,2-dioxaphosphepine]  (CAS  RN  138776-88-2) 
0.5045 
ex 2920 29 00 
40 
Bis(2,4-dicumylphenyl)pentaerythritol  diphosphite  (CAS  RN  154862-43-8) 
0 % 
— 
31.12.2020 
0.6004 
ex 2920 29 00 
50 
Fosetyl-aluminium  (CAS  RN  39148-24-8) 
0 % 
— 
31.12.2023 
— 
EN 
0.7031 
ex 2920 29 00 
60 
Fosetyl-sodium  (CAS  RN  39148-16-8)  in  form of  an  aqueous  solution  with  a content  by 
0 % 
— 
31.12.2021 
weight  of  fosetyl-sodium  of  35 %  or  more  but  not  more  than  45 %  for  use  in  the  manu­
— 
facture  of  pesticides (2 ) 
01.07.2020 
▼M13 
0.7898 
ex 2920 29 00 
80 
2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H  dibenzo[d,g][1,3,2]dioxap­
0 % 
— 
31.12.2024 
— 
hosphocin  (CAS  RN  126050-54-2)  with  a  content  of  95 %  or  more  by  weight  (CAS 
013.001 
RN  126050-54-2) 
C3 
— 
0.3635 
ex 2920 90 10 
10 
Diethyl  sulphate  (CAS  RN  64-67-5) 
0 % 
— 
31.12.2023 
41
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7559 
ex 2920 90 10 
15 
Ethyl  methyl  carbonate  (CAS  RN  623-53-0) 
3,2 % 
— 
31.12.2020 
0.2605 
ex 2920 90 10 
20 
Diallyl  2,2'-oxydiethyl  dicarbonate  (CAS  RN  142-22-3) 
0 % 
— 
31.12.2023 
0.7560 
ex 2920 90 10 
25 
Diethyl  carbonate  (CAS  RN  105-58-8) 
3,2 % 
— 
31.12.2020 
0.7558 
ex 2920 90 10 
35 
Vinylene  carbonate  (CAS  RN  872-36-6) 
3,2 % 
— 
31.12.2020 
0.3685 
ex 2920 90 10 
40 
Dimethyl  carbonate  (CAS  RN  616-38-6) 
0 % 
— 
31.12.2023 
0.3868 
ex 2920 90 10 
50 
Di-tert-butyl  dicarbonate  (CAS  RN  24424-99-5) 
0 % 
— 
31.12.2023 
0.5756 
ex 2920 90 10 
60 
2,4-Di-tert-butyl-5-nitrophenyl  methyl  carbonate  (CAS  RN  873055-55-1) 
0 % 
— 
31.12.2022 
02013R1387 
0.7068 
ex 2920 90 10 
80 
Sodium 2-[2-(2-tridecoxyethoxy)ethoxy]ethyl sulphate (CAS RN 25446-78-0) in the form of 
0 % 
— 
31.12.2021 
a liquid paste with a content by weight in water of 62 % or more but not more than 65 % 
0.7588 
ex 2920 90 70 
20 
Diethyl  phosphorochloridate  (CAS  RN  814-49-3) 
0 % 
— 
31.12.2023 
— 
EN 
0.7465 
ex 2920 90 70 
30 
2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane  (CAS  RN  61676-62-8) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.5947 
ex 2920 90 70 
60 
Bis(neopentylglycolato)diboron  (CAS  RN  201733-56-4) 
0 % 
— 
31.12.2023 
0.6598 
ex 2920 90 70 
80 
Bis(pinacolato)diboron  (CAS  RN  73183-34-3) 
0 % 
— 
31.12.2020 
— 
013.001 
0.5668 
2921 13 00 
2-(N,N-Diethylamino)ethyl  chloride  hydrochloride  (CAS  RN  869-24-9) 
0 % 
— 
31.12.2022 
— 
0.3629 
ex 2921 19 99 
20 
Ethyl(2-methylallyl)amine  (CAS  RN  18328-90-0) 
0 % 
— 
31.12.2023 
42
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3631 
ex 2921 19 99 
30 
Allylamine  (CAS  RN  107-11-9) 
0 % 
— 
31.12.2023 
0.7073 
ex 2921 19 99 
45 
2-Chloro-N-(2-chloroethyl)ethanamine  hydrochloride  (CAS  RN  821-48-7) 
0 % 
— 
31.12.2021 
0.5650 
ex 2921 19 99 
70 N,N-Dimethyloctylamine  –  boron  trichloride  (1:1)  (CAS  RN  34762-90-8) 
0 % 
— 
31.12.2022 
0.6269 
ex 2921 19 99 
80 
Taurine  (CAS  RN  107-35-7),  with  0,5 %  addition  of  anti-caking  agent  silicon  dioxide 
0 % 
— 
31.12.2024 
(CAS  RN  112926-00-8) 
0.3630 
ex 2921 29 00 
20 
Tris[3-(dimethylamino)propyl]amine  (CAS  RN  33329-35-0) 
0 % 
— 
31.12.2023 
0.3625 
ex 2921 29 00 
30 
Bis[3-(dimethylamino)propyl]methylamine  (CAS  RN  3855-32-1) 
0 % 
— 
31.12.2023 
0.4917 
ex 2921 29 00 
40 
Decamethylenediamine  (CAS  RN  646-25-3) 
0 % 
— 
31.12.2020 
02013R1387 
0.5256 
ex 2921 29 00 
50 N'-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine  (CAS  RN  6711-48-4) 
0 % 
— 
31.12.2021 
0.7488 
ex 2921 30 10 
10 
2-(4-(cyclopropanecarbonyl)phenyl)-2-methylpropanoic  acid  cyclohexylamine  salt  (CAS 
0 % 
— 
31.12.2023 
RN  1690344-90-1) 
— 
EN 
0.4862 
ex 2921 30 99 
30 
1,3-Cyclohexanedimethanamine  (CAS  RN  2579-20-6) 
0 % 
— 
31.12.2020 
— 
01.07.2020 
0.5768 
ex 2921 30 99 
40 
Cyclopropylamine  (CAS  RN  765-30-0) 
0 % 
— 
31.12.2022 
0.7750 
ex 2921 30 99 
50 
Bicyclo[1.1.1]pentan-1-amine  hydrochloride  (CAS  RN  22287-35-0) 
0 % 
— 
31.12.2024 
— 
013.001 
0.3909 
ex 2921 42 00 
25 
Sodium  hydrogen  2-aminobenzene-1,4-disulphonate  (CAS  RN  24605-36-5) 
0 % 
— 
31.12.2023 
— 
0.6615 
ex 2921 42 00 
33 
2-Fluoroaniline  (CAS  RN  348-54-9) 
0 % 
— 
31.12.2020 
43
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3978 
ex 2921 42 00 
35 
2-Nitroaniline  (CAS  RN  88-74-4) 
0 % 
— 
31.12.2023 
0.6550 
ex 2921 42 00 
40 
Sodium  sulphanilate  (CAS  RN  515-74-2),  also  in  form  of  its  mono-  or  dihydrates  (CAS 
0 % 
— 
31.12.2024 
RN  12333-70-0  or  6106-22-5) 
0.3979 
ex 2921 42 00 
45 
2,4,5-Trichloroaniline  (CAS  RN  636-30-6) 
0 % 
— 
31.12.2023 
0.2620 
ex 2921 42 00 
50 
3-Aminobenzenesulfonic  acid  (CAS  RN  121-47-1) 
0 % 
— 
31.12.2023 
0.7739 
ex 2921 42 00 
55 
4-Chloroaniline  (CAS  RN  106-47-8) 
0 % 
— 
31.12.2024 
0.3623 
ex 2921 42 00 
70 
2-Aminobenzene-1,4-disulfonic  acid  (CAS  RN  98-44-2) 
0 % 
— 
31.12.2024 
0.3622 
ex 2921 42 00 
80 
4-Chloro-2-nitroaniline  (CAS  RN  89-63-4) 
0 % 
— 
31.12.2023 
02013R1387 
0.3687 
ex 2921 42 00 
85 
3,5-Dichloroaniline  (CAS  RN  626-43-7) 
0 % 
— 
31.12.2023 
0.5616 
ex 2921 42 00 
86 
2,5-Dichloroaniline  (CAS  RN  95-82-9) 
0 % 
— 
31.12.2022 
— 
0.5603 
ex 2921 42 00 
87 
N-Methylaniline  (CAS  RN  100-61-8) 
0 % 
— 
31.12.2022 
EN 
— 
0.5617 
ex 2921 42 00 
88 
3,4-Dichloroaniline-6-sulphonic  acid  (CAS  RN  6331-96-0) 
0 % 
— 
31.12.2022 
01.07.2020 
0.2617 
ex 2921 43 00 
20 
4-Amino-6-chlorotoluene-3-sulphonic  acid  (CAS  RN  88-51-7) 
0 % 
— 
31.12.2023 
— 
0.2615 
ex 2921 43 00 
30 
3-Nitro-p-toluidine  (CAS  RN  119-32-4) 
0 % 
— 
31.12.2023 
013.001 
0.3980 
ex 2921 43 00 
40 
4-Aminotoluene-3-sulphonic  acid  (CAS  RN  88-44-8) 
0 % 
— 
31.12.2024 
— 
0.5125 
ex 2921 43 00 
50 
4-Aminobenzotrifluoride  (CAS  RN  455-14-1) 
0 % 
— 
31.12.2020 
44
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5124 
ex 2921 43 00 
60 
3-Aminobenzotrifluoride  (CAS  RN  98-16-8) 
0 % 
— 
31.12.2020 
0.7583 
ex 2921 43 00 
70 
5-Bromo-4-fluoro-2-methylaniline  (CAS  RN  627871-16-3) 
0 % 
— 
31.12.2023 
0.3621 
ex 2921 44 00 
20 
Diphenylamine  (CAS  RN  122-39-4) 
0 % 
— 
31.12.2023 
0.2618 
ex 2921 45 00 
20 
2-Aminonaphthalene-1,5-disulphonic  acid  (CAS  RN  117-62-4)  or  one  of  its sodium  salts 
0 % 
— 
31.12.2024 
(CAS  RN  19532-03-7)  or  (CAS  RN  62203-79-6) 
0.7628 
ex 2921 45 00 
30 
(5  or  8)-Aminonaphthalene-2-sulphonic  acid  (CAS  RN  51548-48-2) 
0 % 
— 
31.12.2023 
0.5994 
ex 2921 45 00 
50 
7-Aminonaphthalene-1,3,6-trisulphonic  acid  (CAS  RN  118-03-6) 
0 % 
— 
31.12.2024 
0.7316 
ex 2921 45 00 
60 
1-Naphthylamine  (CAS  RN  134-32-7) 
0 % 
— 
31.12.2022 
02013R1387 
0.7315 
ex 2921 45 00 
70 
8-Aminonaphthalene-2-sulphonic  acid  (CAS  RN  119-28-8) 
0 % 
— 
31.12.2022 
0.7629 
ex 2921 45 00 
80 
2-Aminonaphthalene-1-sulphonic  acid  (CAS  RN  81-16-3) 
0 % 
— 
31.12.2023 
— 
0.3618 
ex 2921 49 00 
20 
Pendimethalin  (ISO)  (CAS  RN  40487-42-1) 
3,5 % 
— 
31.12.2023 
EN 
— 
0.7705 
ex 2921 49 00 
30 
4-Isopropylaniline  (CAS  RN  99-88-7) 
0 % 
— 
31.12.2024 
01.07.2020 
0.7592 
ex 2921 49 00 
35 
2-Ethylaniline  (CAS  RN  578-54-1) 
0 % 
— 
31.12.2023 
— 
0.2609 
ex 2921 49 00 
40 
N-1-Naphthylaniline  (CAS  RN  90-30-2) 
0 % 
— 
31.12.2023 
013.001 
0.6825 
ex 2921 49 00 
60 
2,6-Diisopropylaniline  (CAS  RN  24544-04-5) 
0 % 
— 
31.12.2020 
— 
0.5126 
ex 2921 49 00 
80 
4-Heptafluoroisopropyl-2-methylaniline  (CAS  RN  238098-26-5) 
0 % 
— 
31.12.2020 
45
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3981 
ex 2921 51 19 
30 
2-Methyl-p-phenylenediamine  sulphate  (CAS  RN  615-50-9) 
0 % 
— 
31.12.2023 
0.4184 
ex 2921 51 19 
40 
p-Phenylenediamine  (CAS  RN  106-50-3) 
0 % 
— 
31.12.2021 
0.4498 
ex 2921 51 19 
50 
Mono-  and  dichloroderivatives  of p-phenylenediamine  and  p-diaminotoluene 
0 % 
— 
31.12.2024 
0.5995 
ex 2921 51 19 
60 
2,4-Diaminobenzenesulphonic  acid  (CAS  RN  88-63-1) 
0 % 
— 
31.12.2024 
0.6595 
ex 2921 51 19 
70 
4-Bromo-  1,2-diaminobenzene  (CAS  RN  1575-37-7) 
0 % 
— 
31.12.2020 
▼M13 
0.7894 
ex 2921 51 90 
10 
N-(4-Chlorophenyl)benzene-1,2-diamine  (CAS  RN  68817-71-0)  with  a  purity  by  weight 
0 % 
— 
31.12.2024 
of  97 %  or  more 
C3 
0.2612 
ex 2921 59 90 
10 
Mixture  of  isomers  of  3,5-diethyltoluenediamine  (CAS  RN  68479-98-1,  CAS  RN 
0 % 
— 
31.12.2023 
75389-89-8) 
0.3785 
ex 2921 59 90 
30 
3,3'-Dichlorobenzidine  dihydrochloride  (CAS  RN  612-83-9) 
0 % 
— 
31.12.2022 
02013R1387 
0.3870 
ex 2921 59 90 
40 
4,4'-Diaminostilbene-2,2'-disulphonic  acid  (CAS  RN  81-11-8) 
0 % 
— 
31.12.2023 
0.5509 
ex 2921 59 90 
60 
(2R,5R)-1,6-Diphenylhexane-2,5-diamine  dihydrochloride  (CAS  RN  1247119-31-8) 
0 % 
— 
31.12.2022 
0.6616 
ex 2921 59 90 
70 
Tris(4-aminophenyl)methane  (CAS  RN  548-61-8) 
0 % 
— 
31.12.2020 
— 
▼M13 
EN 
0.7860 
ex 2922 19 00 
15 
Aqueous  solution,  containing  by  weight: 
0 % 
— 
31.12.2024 
— 
—  73 %  or  more  2-amino-2-methyl-1-propanol  (CAS  RN  124-68-5), 
01.07.2020 
—  4,5 %  or  more,  but  not  more  than  27 %  water  (CAS  RN  7732-18-5) 
C3 
0.5757 
ex 2922 19 00 
20 
2-(2-Methoxyphenoxy)ethylamine  hydrochloride  (CAS  RN  64464-07-9) 
0 % 
— 
31.12.2022 
— 
013.001 
0.3617 
ex 2922 19 00 
30 N,N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine)  (CAS  RN  3033-62-3) 
0 % 
— 
31.12.2023 
0.6947 
ex 2922 19 00 
35 
2-[2-(Dimethylamino)ethoxy]  ethanol  (CAS  RN  1704-62-7) 
0 % 
— 
31.12.2020 
— 
0.7179 
ex 2922 19 00 
40 
(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol  4-methylben­
0 % 
— 
31.12.2021 
46
zenesulphonate  (CAS  RN  1294504-64-5) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7480 
ex 2922 19 00 
45 
2-Methoxymethyl-p-phenylenediamine  (CAS  RN  337906-36-2) 
0 % 
— 
31.12.2023 
0.3616 
ex 2922 19 00 
50 
2-(2-Methoxyphenoxy)ethylamine  (CAS  RN  1836-62-0) 
0 % 
— 
31.12.2024 
0.7587 
ex 2922 19 00 
55 
3-Aminoadamantan-1-ol  (CAS  RN  702-82-9) 
0 % 
— 
31.12.2023 
0.3871 
ex 2922 19 00 
60 N,N,N'-trimethyl-N'-(2-hydroxy-ethyl)  2,2'-oxybis(ethylamine)  (CAS  RN  83016-70-0) 
0 % 
— 
31.12.2023 
0.5905 
ex 2922 19 00 
65 trans-4-Aminocyclohexanol  (CAS  RN  27489-62-9) 
0 % 
— 
31.12.2023 
0.5986 
ex 2922 19 00 
75 
2-Ethoxyethylamine  (CAS  RN  110-76-9) 
0 % 
— 
31.12.2023 
0.4665 
ex 2922 19 00 
80 
N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine 
(CAS 
RN 
0 % 
— 
31.12.2024 
189253-72-3) 
02013R1387 
0.5911 
ex 2922 19 00 
85 
(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate  (CAS  RN  229177-52-0) 
0 % 
— 
31.12.2023 
0.5996 
ex 2922 21 00 
10 
2-Amino-5-hydroxynaphthalene-1,7-disulphonic  acid  (CAS  RN  6535-70-2) 
0 % 
— 
31.12.2024 
— 
EN 
0.2703 
ex 2922 21 00 
30 
6-Amino-4-hydroxynaphthalene-2-sulphonic  acid  (CAS  RN  90-51-7) 
0 % 
— 
31.12.2024 
— 
01.07.2020 
0.2704 
ex 2922 21 00 
40 
7-Amino-4-hydroxynaphthalene-2-sulphonic  acid  (CAS  RN  87-02-5) 
0 % 
— 
31.12.2023 
0.3873 
ex 2922 21 00 
50 
Sodium  hydrogen  4-amino-5-hydroxynaphthalene-2,7-disulphonate  (CAS  RN  5460-09-3) 
0 % 
— 
31.12.2024 
— 
013.001 
0.5997 
ex 2922 21 00 
60 
4-Amino-5-hydroxynaphthalene-2,7-disulphonic  acid  with  a  purity  by  weight  of  80 %  or 
0 % 
— 
31.12.2023 
more  (CAS  RN  90-20-0) 
— 
0.2702 
ex 2922 29 00 
20 
3-Aminophenol  (CAS  RN  591-27-5) 
0 % 
— 
31.12.2023 
47
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3982 
ex 2922 29 00 
25 
5-Amino-o-cresol  (CAS  RN  2835-95-2) 
0 % 
— 
31.12.2023 
0.6624 
ex 2922 29 00 
30 
1,2-Bis(2-aminophenoxy)ethane  (CAS  RN  52411-34-4) 
0 % 
— 
31.12.2020 
0.7642 
ex 2922 29 00 
33 
o-Phenetidine  (CAS  RN  94-70-2) 
0 % 
— 
31.12.2023 
0.6653 
ex 2922 29 00 
40 
4-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS RN 25251-42-7) 
0 % 
— 
31.12.2020 
0.2936 
ex 2922 29 00 
45 
Anisidines 
0 % 
— 
31.12.2023 
0.6634 
ex 2922 29 00 
63 
Aclonifen  (ISO)  (CAS  RN  74070-46-5)  with  a  purity  by  weight  of  97 %  or  more 
0 % 
— 
31.12.2020 
0.4627 
ex 2922 29 00 
65 
4-Trifluoromethoxyaniline  (CAS  RN  461-82-5) 
0 % 
— 
31.12.2024 
0.7481 
ex 2922 29 00 
67 
4-Chloro-2,5-dimethoxyaniline  (CAS  RN  6358-64-1) 
0 % 
— 
31.12.2023 
02013R1387 
0.2692 
ex 2922 29 00 
70 
4-Nitro-o-anisidine  (CAS  RN  97-52-9) 
0 % 
— 
31.12.2023 
— 
0.7026 
ex 2922 29 00 
73 
Tris(4-aminophenyl)  thiophosphate  (CAS  RN  52664-35-4) 
0 % 
— 
31.12.2021 
EN 
— 
0.4956 
ex 2922 29 00 
75 
4-(2-Aminoethyl)phenol  (CAS  RN  51-67-2) 
0 % 
— 
31.12.2020 
01.07.2020 
0.2696 
ex 2922 29 00 
80 
3-Diethylaminophenol  (CAS  RN  91-68-9) 
0 % 
— 
31.12.2023 
0.5898 
ex 2922 29 00 
85 
4-Benzyloxyaniline  hydrochloride  (CAS  RN  51388-20-6) 
0 % 
— 
31.12.2023 
— 
013.001 
0.2690 
ex 2922 39 00 
10 
1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic  acid  and  its  salts 
0 % 
— 
31.12.2023 
— 
0.7371 
ex 2922 39 00 
15 
2-Amino-3,5-dibromobenzaldehyde  (CAS  RN  50910-55-9) 
0 % 
— 
31.12.2022 
48
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4914 
ex 2922 39 00 
20 
2-Amino-5-chlorobenzophenone  (CAS  RN  719-59-5) 
0 % 
— 
31.12.2020 
0.6838 
ex 2922 39 00 
25 
3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride  (CAS  RN  5409-58-5) 
0 % 
— 
31.12.2020 
0.7713 
ex 2922 39 00 
30 
(2-Fluorophenyl)-[2-(methylamino)-5-nitrophenyl]methanone  (CAS  RN  735-06-8) 
0 % 
— 
31.12.2024 
0.6761 
ex 2922 39 00 
35 
5-Chloro-2-(methylamino)benzophenone  (CAS  RN  1022-13-5) 
0 % 
— 
31.12.2020 
0.7800 
ex 2922 39 00 
40 
4,4'-Bis(diethylamino)benzophenone  (CAS  RN  90-93-7) 
0 % 
— 
31.12.2024 
0.3546 
ex 2922 43 00 
10 
Anthranilic  acid  (CAS  RN  118-92-3) 
0 % 
— 
31.12.2023 
0.3547 
ex 2922 49 85 
10 
Ornithine  aspartate  (INNM)  (CAS  RN  3230-94-2) 
0 % 
— 
31.12.2023 
▼M13 
0.7853 
ex 2922 49 85 
13 
O-Benzylglycine  p-toluenesulphonate  (CAS  RN  1738-76-7)  with  a  purity  by  weight  of 
0 % 
— 
31.12.2024 
93 %  or  more 
C3 
02013R1387 
0.5619 
ex 2922 49 85 
20 
3-Amino-4-chlorobenzoic  acid  (CAS  RN  2840-28-0) 
0 % 
— 
31.12.2022 
0.6340 
ex 2922 49 85 
25 
Dimethyl  2-aminobenzene-1,4-dicarboxylate  (CAS  RN  5372-81-6) 
0 % 
— 
31.12.2024 
0.6948 
ex 2922 49 85 
30 
Aqueous  solution  containing  40 %  by  weight  or  more  of  sodium  methylaminoacetate 
0 % 
— 
31.12.2020 
(CAS  RN  4316-73-8) 
— 
EN 
0.6969 
ex 2922 49 85 
35 
2-  (3-Amino-4-chloro-benzoyl)  benzoic  acid  (CAS  RN  118-04-7) 
0 % 
— 
31.12.2021 
— 
0.3544 
ex 2922 49 85 
40 
Norvaline 
0 % 
— 
31.12.2023 
01.07.2020 
▼M13 
0.5037 
ex 2922 49 85 
17 
Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with 
0 % 
— 
31.12.2020 
— 
not  more  than  5 %  addition  of  anti-caking  agent  silicon  dioxide  (CAS  RN  112926-00-8) 
013.001 
C3 
0.3983 
ex 2922 49 85 
50 
D-(-)-Dihydrophenylglycine  (CAS  RN  26774-88-9) 
0 % 
— 
31.12.2024 
— 
49
0.4239 
ex 2922 49 85 
60 
Ethyl-4-dimethylaminobenzoate  (CAS  RN  10287-53-3) 
0 % 
— 
31.12.2022 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6650 
ex 2922 49 85 
65 
Diethyl  aminomalonate  hydrochloride  (CAS  RN  13433-00-6) 
0 % 
— 
31.12.2020 
0.4426 
ex 2922 49 85 
70 
2-Ethylhexyl-4-dimethylaminobenzoate  (CAS  RN  21245-02-3) 
0 % 
— 
31.12.2023 
0.7254 
ex 2922 49 85 
75 
L-alanine  isopropyl  ester  hydrochloride  (CAS  RN  62062-65-1) 
0 % 
— 
31.12.2022 
0.6100 
ex 2922 49 85 
80 
12-Aminododecanoic  acid  (CAS  RN  693-57-2) 
0 % 
— 
31.12.2023 
▼M13  _____ 
C3 
0.7020 
ex 2922 50 00 
10 
2-(2-(2-Aminoethoxy)ethoxy)acetic  acid  hydrochloride  (CAS  RN  134979-01-4) 
0 % 
— 
31.12.2021 
0.7257 
ex 2922 50 00 
15 
3,5-Diiodothyronine  (CAS  RN  1041-01-6) 
0 % 
— 
31.12.2022 
0.4702 
ex 2922 50 00 
20 
1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol  hydrochloride  (CAS  RN  130198- 
0 % 
— 
31.12.2024 
05-9) 
02013R1387 
0.7523 
ex 2922 50 00 
35 
(2S)-2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanoic  acid  hydrochloride  (CAS  RN 
0 % 
— 
31.12.2023 
5486-79-3) 
0.2681 
ex 2922 50 00 
70 
2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium  acetate 
0 % 
— 
31.12.2023 
— 
0.6226 
ex 2923 10 00 
10 
Calcium  phosphoryl  choline  chloride  tetrahydrate  (CAS  RN  72556-74-2) 
0 % 
— 
31.12.2024 
EN 
— 
0.3543 
ex 2923 90 00 
10 
Tetramethylammonium  hydroxide,  in  the  form  of  an  aqueous  solution  containing  25 % 
0 % 
— 
31.12.2023 
(±0,5  %)  by  weight  of  tetramethylammonium  hydroxide 
01.07.2020 
0.4499 
ex 2923 90 00 
25 
Tetrakis(dimethylditetradecylammonium)  molybdate  (CAS  RN  117342-25-3) 
0 % 
— 
31.12.2023 
▼M13 
— 
013.001 
0.7879 
ex 2923 90 00 
50 
Betaine  hydrochloride  (CAS  RN  590-46-5)  with  a  purity  by  weight  of  93 %  or  more 
0 % 
— 
31.12.2024 
C3 
— 
0.7089 
ex 2923 90 00 
55 
Tetrabutylammonium  bromide  (CAS  RN  1643-19-2) 
0 % 
— 
31.12.2021 
50
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7615 
ex 2923 90 00 
65 
N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in 
0 % 
— 
31.12.2023 
form of an aqueous  solution  with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan- 
1-aminium  hydroxide  by  weight  of  17,5 %  or  more  but  not  more  than  27,5 % 
0.3538 
ex 2923 90 00 
70 
Tetrapropylammonium  hydroxide,  in  the  form  of  an  aqueous  solution  containing: 
0 % 
— 
31.12.2023 
—  40 %  (±  2 %)  by  weight  of  tetrapropylammonium  hydroxide, 
—  0,3 %  by  weight  or  less  of  carbonate, 
—  0,1 %  by  weight  or  less  of  tripropylamine, 
—  500  mg/kg  or  less  of  bromide,  and 
—  25  mg/kg  or  less  of  potassium  and  sodium  taken  together 
0.5063 
ex 2923 90 00 
75 
Tetraethylammonium  hydroxide,  in  the  form  of  an  aqueous  solution  containing: 
0 % 
— 
31.12.2020 
—  35 %  (±0,5  %)  by  weight  of  tetraethylammonium  hydroxide, 
—  not  more  than  1 000  mg/kg  of  chloride, 
—  not  more  than  2  mg/kg  of  iron,  and 
—  not  more  than  10  mg/kg  of  potassium 
02013R1387 
0.3536 
ex 2923 90 00 
80 
Diallyldimethylammonium  chloride  (CAS  RN  7398-69-8),  in  the  form  of  an  aqueous 
0 % 
— 
31.12.2023 
solution  containing  by  weight  63 %  or  more  but  not  more  than  67 %  of  diallyldimethyl­
ammonium  chloride 
— 
0.6410 
ex 2923 90 00 
85 
N,N,N-Trimethylanilinium  chloride  (CAS  RN  138-24-9) 
0 % 
— 
31.12.2024 
EN 
— 
0.2678 
ex 2924 19 00 
10 
2-Acrylamido-2-methylpropanesulphonic  acid  (CAS  RN  15214-89-8)  or  its  sodium  salt 
0 % 
— 
31.12.2023 
01.07.2020 
(CAS  RN  5165-97-9),  or  its  ammonium  salt  (CAS  RN  58374-69-9) 
0.6227 
ex 2924 19 00 
15 
N-Ethyl  N-methylcarbamoyl  chloride  (CAS  RN  42252-34-6) 
0 % 
— 
31.12.2024 
— 
013.001 
0.6597 
ex 2924 19 00 
20 
(R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic  acid  (CAS  RN  181289-33-8) 
0 % 
— 
31.12.2020 
— 
0.7258 
ex 2924 19 00 
25 
Isobutylidenediurea  (CAS  RN  6104-30-9) 
0 % 
— 
31.12.2022 
51
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3535 
ex 2924 19 00 
30 
Methyl  2-acetamido-3-chloropropionate  (CAS  RN  87333-22-0) 
0 % 
— 
31.12.2023 
0.6549 
ex 2924 19 00 
35 
Acetamide  (CAS  RN  60-35-5) 
0 % 
— 
31.12.2024 
0.6996 
ex 2924 19 00 
45 
3-Chloro-N-methoxy-N-methylpropanamide  (CAS  RN  1062512-53-1) 
0 % 
— 
31.12.2021 
▼M13 
0.3689 
ex 2924 19 00 
23 
Acrylamide  (CAS  RN  79-06-1)  with  a  purity  by  weight  of  97 %  or  more 
2 % 
— 
31.12.2021 
C3 
0.7060 
ex 2924 19 00 
55 
2-Propynyl  butylcarbamate  (CAS  RN  76114-73-3) 
0 % 
— 
31.12.2021 
0.4160 
ex 2924 19 00 
60 N,N-Dimethylacrylamide  (CAS  RN  2680-03-7) 
0 % 
— 
31.12.2021 
02013R1387 
0.7482 
ex 2924 19 00 
65 
2,2,2-trifluoroacetamide  (CAS  RN  354-38-1) 
0 % 
— 
31.12.2023 
0.4380 
ex 2924 19 00 
70 
Methylcarbamate  (CAS  RN  598-55-0) 
0 % 
— 
31.12.2023 
— 
0.7575 
ex 2924 19 00 
75 
(S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic  acid  (CAS  RN  207305-60-0) 
0 % 
— 
31.12.2023 
EN 
— 
0.5605 
ex 2924 19 00 
80 
Tetrabutylurea  (CAS  RN  4559-86-8) 
0 % 
— 
31.12.2022 
01.07.2020 
0.2939 
ex 2924 21 00 
10 
4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic  acid)  and  its  sodium  salts 
0 % 
— 
31.12.2023 
— 
0.5998 
ex 2924 21 00 
20 
(3-Aminophenyl)urea  hydrochloride  (CAS  RN  59690-88-9) 
0 % 
— 
31.12.2024 
013.001 
0.3533 
2924 25 00 
Alachlor  (ISO)  (CAS  RN  15972-60-8) 
0 % 
— 
31.12.2023 
— 
0.6047 
ex 2924 29 70 
12 
4-(Acetylamino)-2-aminobenzenesulphonic  acid  (CAS  RN  88-64-2) 
0 % 
— 
31.12.2024 
52
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3534 
ex 2924 29 70 
15 
Acetochlor  (ISO)  (CAS  RN  34256-82-1) 
0 % 
— 
31.12.2023 
0.6266 
ex 2924 29 70 
17 
2-(Trifluoromethyl)benzamide  (CAS  RN  360-64-5) 
0 % 
— 
31.12.2024 
0.6363 
ex 2924 29 70 
19 
2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic  acid  (CAS  RN  3079-63-8) 
0 % 
— 
31.12.2024 
0.4685 
ex 2924 29 70 
20 
2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide 
(CAS 
RN 
0 % 
— 
31.12.2024 
86763-47-5) 
0.6568 
ex 2924 29 70 
23 
Benalaxyl-M  (ISO)  (CAS  RN  98243-83-5) 
0 % 
— 
31.12.2024 
0.5226 
ex 2924 29 70 
27 
2-Bromo-4-fluoroacetanilide  (CAS  RN  1009-22-9) 
0 % 
— 
31.12.2021 
0.7118 
ex 2924 29 70 
30 
Sodium  4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate  (CAS  RN  84029-45-8) 
0 % 
— 
31.12.2021 
0.6110 
ex 2924 29 70 
37 
Beflubutamid  (ISO)  (CAS  RN  113614-08-7) 
0 % 
— 
31.12.2023 
0.5066 
ex 2924 29 70 
40 
N,N'-1,4-Phenylenebis[3-oxobutyramide]  (CAS  RN  24731-73-5) 
0 % 
— 
31.12.2020 
02013R1387 
0.5127 
ex 2924 29 70 
45 
Propoxur  (ISO)  (CAS  RN  114-26-1) 
0 % 
— 
31.12.2020 
▼M13 
— 
EN 
0.7841 
ex 2924 29 70 
47 
(S)-tert-butyl(1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate  (CAS  RN  868694- 
0 % 
— 
31.12.2024 
44-4)  with  a  purity  by  weight  of  95 %  or  more 
— 
01.07.2020 
C3 
0.7113 
ex 2924 29 70 
50 
N-Benzyloxycarbonyl-L-tert-leucine  isopropylamine  salt  (CAS  RN  1621085-33-3) 
0 % 
— 
31.12.2021 
— 
0.5622 
ex 2924 29 70 
53 
4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide  (CAS  RN  74441-06-8) 
0 % 
— 
31.12.2022 
013.001 
0.5069 
ex 2924 29 70 
55 
N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide]  (CAS  RN  24304-50-5) 
0 % 
— 
31.12.2020 
— 
0.5067 
ex 2924 29 70 
60 
N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide]  (CAS  RN  41131-65-1) 
0 % 
— 
31.12.2020 
53
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6832 
ex 2924 29 70 
61 
(S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethyl­
0 % 
— 
31.12.2020 
butanoate (CUS 0143288-8) (5 ) 
0.6767 
ex 2924 29 70 
62 
2-Chlorobenzamide  (CAS  RN  609-66-5) 
0 % 
— 
31.12.2020 
0.5388 
ex 2924 29 70 
63 
N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide  (CAS  RN  39711-79-0) 
0 % 
— 
31.12.2021 
0.6766 
ex 2924 29 70 
64 
N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide  (CAS  RN  877179-03-8) 
0 % 
— 
31.12.2020 
0.7632 
ex 2924 29 70 
67 
N,N'-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide]  (CAS  RN  42487-09-2) 
0 % 
— 
31.12.2023 
0.7582 
ex 2924 29 70 
70 
N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3- 
0 % 
— 
31.12.2023 
hydroxypropan-2-yl]-L-alaninamide 
0.6480 
ex 2924 29 70 
73 
Napropamide  (ISO)  (CAS  RN  15299-99-7) 
0 % 
— 
31.12.2024 
02013R1387 
0.2672 
ex 2924 29 70 
75 
3-Amino-p-anisanilide  (CAS  RN  120-35-4) 
0 % 
— 
31.12.2023 
0.2673 
ex 2924 29 70 
85 
p-Aminobenzamide  (CAS  RN  2835-68-9) 
0 % 
— 
31.12.2023 
— 
EN 
0.4257 
ex 2924 29 70 
86 
Anthranilamide  (CAS  RN  88-68-6)  of  a  purity  by  weight  of  99,5 %  or  more 
0 % 
— 
31.12.2022 
— 
01.07.2020 
0.4495 
ex 2924 29 70 
88 
5'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide  (CAS  RN  135-63-7) 
0 % 
— 
31.12.2023 
0.4493 
ex 2924 29 70 
89 
Flutolanil  (ISO)  (CAS  RN  66332-96-5) 
0 % 
— 
31.12.2023 
— 
013.001 
0.3690 
ex 2924 29 70 
91 
3-Hydroxy-2'-methoxy-2-naphthanilide  (CAS  RN  135-62-6) 
0 % 
— 
31.12.2023 
— 
0.3691 
ex 2924 29 70 
92 
3-Hydroxy-2-naphthanilide  (CAS  RN  92-77-3) 
0 % 
— 
31.12.2024 
54
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3692 
ex 2924 29 70 
93 
3-Hydroxy-2'-methyl-2-naphthanilide  (CAS  RN  135-61-5) 
0 % 
— 
31.12.2023 
0.3693 
ex 2924 29 70 
94 
2'-Ethoxy-3-hydroxy-2-naphthanilide  (CAS  RN  92-74-0) 
0 % 
— 
31.12.2023 
0.3863 
ex 2924 29 70 
97 
1,1-Cyclohexanediacetic  acid  monoamide  (CAS  RN  99189-60-3) 
0 % 
— 
31.12.2023 
0.3526 
ex 2925 11 00 
20 
Saccharin  and  its  sodium  salt 
0 % 
— 
31.12.2023 
0.2674 
ex 2925 19 95 
10 
N-Phenylmaleimide  (CAS  RN  941-69-5) 
0 % 
— 
31.12.2023 
0.5612 
ex 2925 19 95 
20 
4,5,6,7-Tetrahydroisoindole-1,3-dione  (CAS  RN  4720-86-9) 
0 % 
— 
31.12.2022 
0.5740 
ex 2925 19 95 
30 N,N'-(m-Phenylene)dimaleimide  (CAS  RN  3006-93-7) 
0 % 
— 
31.12.2022 
0.2934 
ex 2925 29 00 
10 
Dicyclohexylcarbodiimide  (CAS  RN  538-75-0) 
0 % 
— 
31.12.2023 
0.5891 
ex 2925 29 00 
20 
N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide  hydrochloride  (CAS  RN  25952-53-8) 
0 % 
— 
31.12.2023 
02013R1387 
0.6636 
ex 2925 29 00 
30 
Guanidine  sulphamate  (CAS  RN  50979-18-5) 
0 % 
— 
31.12.2020 
0.7749 
ex 2925 29 00 
40 
N-amidinosarcosine  (CAS  RN  57-00-1) 
0 % 
— 
31.12.2024 
— 
EN 
▼M13 
— 
0.7832 
ex 2925 29 00 
50 
(Chloromethylene)dimethyliminium  chloride  (CAS  RN  3724-43-4)  with  a  purity  by 
0 % 
— 
31.12.2024 
01.07.2020 
weight  of  95 %  or  more 
C3 
— 
0.6786 
ex 2926 90 70 
14 
Cyanoacetic  acid  (CAS  RN  372-09-8) 
0 % 
— 
31.12.2020 
013.001 
0.7430 
ex 2926 90 70 
15 
2-Cyclohexylidene-2-phenylacetonitrile  (CAS  RN  10461-98-0) 
0 % 
— 
31.12.2022 
— 
0.6258 
ex 2926 90 70 
16 
4-Cyano-2-nitrobenzoic  acid  methyl  ester  (CAS  RN  52449-76-0) 
0 % 
— 
31.12.2024 
55
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6934 
ex 2926 90 70 
17 
Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight 
0 % 
— 
31.12.2020 
of  90 %  or  more 
0.7408 
ex 2926 90 70 
18 
Flumethrin  (ISO)  (CAS  RN  69770-45-2) 
0 % 
— 
31.12.2022 
0.7466 
ex 2926 90 70 
19 
2-(4-amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2) 
0 % 
— 
31.12.2023 
0.2668 
ex 2926 90 70 
20 
2-(m-Benzoylphenyl)propiononitrile  (CAS  RN  42872-30-0) 
0 % 
— 
31.12.2024 
0.7458 
ex 2926 90 70 
21 
4-Bromo-2-chlorobenzonitrile  (CAS  RN  154607-01-9) 
0 % 
— 
31.12.2023 
0.7514 
ex 2926 90 70 
22 
Acetonitrile  (CAS  RN  75-05-8) 
0 % 
— 
31.12.2023 
0.6109 
ex 2926 90 70 
23 
Acrinathrin  (ISO)  (CAS  RN  101007-06-1) 
0 % 
— 
31.12.2023 
02013R1387 
0.7805 
ex 2926 90 70 
24 
2-Hydroxy-2-methylpropiononitrile  (CAS  RN  75-86-5)  with  a  purity  by  weight  of  99 % 
0 % 
— 
31.12.2024 
or  more 
0.5227 
ex 2926 90 70 
25 
2,2-Dibromo-3-nitrilopropionamide  (CAS  RN  10222-01-2) 
0 % 
— 
31.12.2021 
— 
EN 
0.6149 
ex 2926 90 70 
27 
Cyhalofop-butyl  (ISO)  (CAS  RN  122008-85-9) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.7201 
ex 2926 90 70 
30 
4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile  (CAS  RN  84-58-2) 
0 % 
— 
31.12.2021 
0.7406 
ex 2926 90 70 
33 
Deltamethrin  (ISO)  (CAS  RN  52918-63-5) 
0 % 
— 
31.12.2022 
— 
013.001 
0.7034 
ex 2926 90 70 
35 
4-Cyano-2-methoxybenzaldehyde  (CAS  RN  21962-45-8) 
0 % 
— 
31.12.2021 
— 
0.6970 
ex 2926 90 70 
40 
2-(4-Cyanophenylamino)acetic  acid  (CAS  RN  42288-26-6) 
0 % 
— 
31.12.2021 
56
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3522 
ex 2926 90 70 
50 
Alkyl  or  alkoxyalkyl  esters  of  cyanoacetic  acid 
0 % 
— 
31.12.2023 
▼M13 
0.6259 
ex 2926 90 70 
26 
Cyfluthrin  (ISO)  (CAS  RN  68359-37-5)  with  a  purity  by  weight  of  95,5 %  or  more  for 
0 % 
— 
31.12.2024 
the  use  in  the  manufacture  of  biocidal  products (2 ) 
C3 
0.4182 
ex 2926 90 70 
61 
m-(1-Cyanoethyl)benzoic  acid  (CAS  RN  5537-71-3) 
0 % 
— 
31.12.2021 
0.4644 
ex 2926 90 70 
64 
Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture 
0 % 
— 
31.12.2024 
of  its  own  isomers 
0.4802 
ex 2926 90 70 
70 
Methacrylonitrile  (CAS  RN  126-98-7) 
0 % 
— 
31.12.2024 
0.2543 
ex 2926 90 70 
74 
Chlorothalonil  (ISO)  (CAS  RN  1897-45-6) 
0 % 
— 
31.12.2024 
02013R1387 
0.3521 
ex 2926 90 70 
75 
Ethyl  2-cyano-2-ethyl-3-methylhexanoate  (CAS  RN  100453-11-0) 
0 % 
— 
31.12.2024 
0.3516 
ex 2926 90 70 
80 
Ethyl  2-cyano-2-phenylbutyrate  (CAS  RN  718-71-8) 
0 % 
— 
31.12.2023 
— 
EN 
0.3514 
ex 2926 90 70 
86 
Ethylenediaminetetraacetonitrile (CAS  RN  5766-67-6) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.3515 
ex 2926 90 70 
89 
Butyronitrile  (CAS  RN  109-74-0) 
0 % 
— 
31.12.2023 
0.2667 
ex 2927 00 00 
10 
2,2'-Dimethyl-2,2'-azodipropionamidine  dihydrochloride 
0 % 
— 
31.12.2023 
— 
0.2665 
ex 2927 00 00 
20 
4-Anilino-2-methoxybenzenediazonium  hydrogen  sulphate  (CAS  RN  36305-05-2) 
0 % 
— 
31.12.2023 
013.001 
0.7337 
ex 2927 00 00 
25 
2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile)  (CAS  RN  15545-97-8) 
0 % 
— 
31.12.2022 
— 
0.2810 
ex 2927 00 00 
30 
4'-Aminoazobenzene-4-sulphonic  acid  (CAS  RN  104-23-4) 
0 % 
— 
31.12.2023 
57
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6306 
ex 2927 00 00 
35 
C,C'-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decom­
0 % 
— 
31.12.2024 
position temperature of 180°C or more but not more than 220  °C used as a foaming agent 
in  the  manufacture  of  thermoplastic  resins,  elastomer  and  cross-linked  polythene  foam 
0.3984 
ex 2927 00 00 
60 
4,4'-Dicyano-4,4'-azodivaleric  acid  (CAS  RN  2638-94-0) 
0 % 
— 
31.12.2023 
0.5626 
ex 2927 00 00 
80 
4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic  acid  (CAS  RN  51867-77-7) 
0 % 
— 
31.12.2022 
0.2661 
ex 2928 00 90 
10 
3,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N'-bipropionamide  (CAS  RN  32687-78-8) 
0 % 
— 
31.12.2023 
0.6479 
ex 2928 00 90 
13 
Cymoxanil  (ISO)  (CAS  RN  57966-95-7) 
0 % 
— 
31.12.2024 
0.6548 
ex 2928 00 90 
18 
Acetone  oxime  (CAS  RN  127-06-0)  of  a  purity  by  weight  of  99 %  or  more 
0 % 
— 
31.12.2024 
02013R1387 
0.6871 
ex 2928 00 90 
23 
Metobromuron  (ISO)  (CAS  RN  3060-89-7)  with  a  purity  by  weight  of  98 %  or  more 
0 % 
— 
31.12.2020 
0.4929 
ex 2928 00 90 
25 
Acetaldehyde  oxime  (CAS  RN  107-29-9)  in  an  aqueous  solution 
0 % 
— 
31.12.2020 
— 
EN 
0.6985 
ex 2928 00 90 
28 
Pentan-2-one  oxime  (CAS  RN  623-40-5) 
0 % 
— 
31.12.2021 
— 
01.07.2020 
0.5438 
ex 2928 00 90 
30 
N-Isopropylhydroxylamine  (CAS  RN  5080-22-8) 
0 % 
— 
31.12.2021 
0.7448 
ex 2928 00 90 
33 
4-Chlorophenylhydrazine  Hydrochloride  (CAS  RN  1073-70-7) 
0 % 
— 
31.12.2023 
— 
013.001 
0.2659 
ex 2928 00 90 
40 
O-Ethylhydroxylamine,  in  the  form  of  an  aqueous  solution  (CAS  RN  624-86-2) 
0 % 
— 
31.12.2023 
— 
0.5919 
ex 2928 00 90 
45 
Tebufenozide  (ISO)  (CAS  RN  112410-23-8) 
0 % 
— 
31.12.2023 
58
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6635 
ex 2928 00 90 
50 
Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 
0 % 
— 
31.12.2020 
133986-51-3)  with  a  content  by  weight  of  more  than  33,5 %  but  not  more  than  36,5 % 
0.5918 
ex 2928 00 90 
55 
Aminoguanidinium  hydrogen  carbonate  (CAS  RN  2582-30-1) 
0 % 
— 
31.12.2023 
0.6364 
ex 2928 00 90 
65 
2-Amino-3-(4-hydroxyphenyl)  propanal  semicarbazone  hydrochloride 
0 % 
— 
31.12.2024 
0.4544 
ex 2928 00 90 
70 
Butanone  oxime  (CAS  RN  96-29-7) 
0 % 
— 
31.12.2023 
0.5228 
ex 2928 00 90 
75 
Metaflumizone  (ISO)  (CAS  RN  139968-49-3) 
0 % 
— 
31.12.2021 
0.3510 
ex 2928 00 90 
80 
Cyflufenamid  (ISO)  (CAS  RN  180409-60-3) 
0 % 
— 
31.12.2023 
0.5266 
ex 2928 00 90 
85 
Daminozide  (ISO)  with  a  purity  by  weight  of  99 %  or  more  (CAS  RN  1596-84-5) 
0 % 
— 
31.12.2021 
02013R1387 
0.4714 
ex 2929 10 00 
15 
3,3'-Dimethylbiphenyl-4,4'-diyl  diisocyanate  (CAS  RN  91-97-4) 
0 % 
— 
31.12.2024 
0.5827 
ex 2929 10 00 
20 
Butyl  isocyanate  (CAS  RN  111-36-4) 
0 % 
— 
31.12.2022 
— 
EN 
0.2660 
ex 2929 10 00 
40 
m-Isopropenyl-α,α-dimethylbenzyl  isocyanate  (CAS  RN  2094-99-7) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.2657 
ex 2929 10 00 
50 
m-Phenylenediisopropylidene  diisocyanate  (CAS  RN  2778-42-9) 
0 % 
— 
31.12.2023 
0.5033 
ex 2929 10 00 
55 
2,5  (and  2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane  (CAS  RN  74091-64-8) 
0 % 
— 
31.12.2022 
— 
013.001 
0.3509 
ex 2929 10 00 
60 
Trimethylhexamethylene  diisocyanate,  mixed  isomers 
0 % 
— 
31.12.2023 
— 
0.4188 
ex 2929 10 00 
80 
1,3-Bis(isocyanatomethyl)benzene  (CAS  RN  3634-83-1) 
0 % 
— 
31.12.2022 
59
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4298 
ex 2930 20 00 
10 
Prosulfocarb  (ISO)  (CAS  RN  52888-80-9) 
0 % 
— 
31.12.2022 
0.5278 
ex 2930 20 00 
20 
2-Isopropylethylthiocarbamate  (CAS  RN  141-98-0) 
0 % 
— 
31.12.2021 
0.5035 
ex 2930 90 98 
10 
2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol  (CAS  RN  131538-00-6) 
0 % 
— 
31.12.2020 
0.7483 
ex 2930 90 98 
12 
4,4'-Sulfonyldiphenol  (CAS  RN  80-09-1)  used  in  the  manufacture  of  polyarylsulfones  or 
0 % 
— 
31.12.2023 
polyarylethersulfones (2 ) 
0.5390 
ex 2930 90 98 
13 
Mercaptamine  hydrochloride  (CAS  RN  156-57-0) 
0 % 
— 
31.12.2021 
0.2932 
ex 2930 90 98 
15 
Ethoprophos  (ISO)  (CAS  RN  13194-48-4) 
0 % 
— 
31.12.2023 
0.6551 
ex 2930 90 98 
16 
3-(Dimethoxymethylsilyl)-1-propanethiol  (CAS  RN  31001-77-1) 
0 % 
— 
31.12.2024 
02013R1387 
0.5999 
ex 2930 90 98 
17 
2-(3-Aminophenylsulphonyl)ethyl  hydrogen  sulphate  (CAS  RN  2494-88-4) 
0 % 
— 
31.12.2024 
0.7748 
ex 2930 90 98 
18 
Dimethyl  sulfone  (CAS  RN  67-71-0) 
0 % 
— 
31.12.2024 
— 
EN 
0.6768 
ex 2930 90 98 
19 
N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N'-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluor­
0 % 
— 
31.12.2020 
omethyl)ethyl]phenyl}phthalamide  (CAS  RN  371771-07-2) 
— 
01.07.2020 
0.7799 
ex 2930 90 98 
20 
4-(4-Methylphenylthio)benzophenone  (CAS  RN  83846-85-9) 
0 % 
— 
31.12.2024 
0.6750 
ex 2930 90 98 
21 
[2,2'-Thio-bis(4-tert-octylphenolato)]-n-butylamine  nickel  (CAS  RN  14516-71-3) 
0 % 
— 
31.12.2021 
— 
013.001 
0.6769 
ex 2930 90 98 
22 
Tembotrione  (ISO)  (CAS  RN  335104-84-2)  with  a  purity  by  weight  of  94,5 %  or  more 
0 % 
— 
31.12.2020 
— 
0.5899 
ex 2930 90 98 
23 
Dimethyl  [(methylsulphanyl)methylylidene]biscarbamate  (CAS  RN  34840-23-8) 
0 % 
— 
31.12.2023 
60
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7714 
ex 2930 90 98 
24 
Phenyl  vinyl  sulfone  (CAS  RN  5535-48-8) 
0 % 
— 
31.12.2024 
0.2930 
ex 2930 90 98 
25 
Thiophanate-methyl  (ISO)  (CAS  RN  23564-05-8) 
0 % 
— 
31.12.2023 
0.6873 
ex 2930 90 98 
26 
Folpet  (ISO)(CAS  RN  133-07-3)  with  a  purity  by  weight  of  97,5 %  or  more 
0 % 
— 
31.12.2020 
0.6585 
ex 2930 90 98 
27 
2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl  hydrogen  sulphate  (CAS  RN  26672-22-0) 
0 % 
— 
31.12.2024 
▼M13 
0.7859 
ex 2930 90 98 
29 
4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by 
0 % 
— 
31.12.2024 
weight  of  98 %  or  more 
C3 
0.2933 
ex 2930 90 98 
30 
4-(4-Isopropoxyphenylsulphonyl)phenol  (CAS  RN  95235-30-6) 
0 % 
— 
31.12.2023 
▼M13 
0.7833 
ex 2930 90 98 
31 
(p-toluenesulphonyl)methyl  isocyanide (CAS RN 36635-61-7)  with a purity by  weight of 
0 % 
— 
31.12.2024 
98 %  or  more 
02013R1387 
C3 
0.6584 
ex 2930 90 98 
33 
2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc  acid  (CAS  RN  42986-22-1) 
0 % 
— 
31.12.2024 
0.3811 
ex 2930 90 98 
35 
Glutathione  (CAS  RN  70-18-8) 
0 % 
— 
31.12.2021 
— 
0.7682 
ex 2930 90 98 
38 
Allyl  isothiocyanate  (CAS  RN  57-06-7) 
0 % 
— 
31.12.2023 
EN 
— 
0.2928 
ex 2930 90 98 
40 
3,3'-Thiodi(propionic  acid)  (CAS  RN  111-17-1) 
0 % 
— 
31.12.2023 
01.07.2020 
0.6167 
ex 2930 90 98 
43 
Trimethylsulfoxonium  iodide  (CAS  RN  1774-47-6) 
0 % 
— 
31.12.2023 
0.2931 
ex 2930 90 98 
45 
2-[(p-Aminophenyl)sulphonyl]ethyl  hydrogen  sulphate  (CAS  RN  2494-89-5) 
0 % 
— 
31.12.2024 
— 
0.7689 
ex 2930 90 98 
50 
3-Mercaptopropionic  acid  (CAS  RN  107-96-0) 
0 % 
— 
31.12.2023 
013.001 
0.6617 
ex 2930 90 98 
53 
Bis(4-chlorophenyl)  sulphone  (CAS  RN  80-07-9) 
0 % 
— 
31.12.2020 
0.5114 
ex 2930 90 98 
55 
Thiourea  (CAS  RN  62-56-6) 
0 % 
— 
31.12.2020 
— 
61
0.6619 
ex 2930 90 98 
57 
Methyl  (methylthio)acetate  (CAS  RN  16630-66-3) 
0 % 
— 
31.12.2020 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2929 
ex 2930 90 98 
60 
Methyl  phenyl  sulphide  (CAS  RN  100-68-5) 
0 % 
— 
31.12.2023 
0.4629 
ex 2930 90 98 
64 
3-Chloro-2-methylphenyl  methyl  sulphide  (CAS  RN  82961-52-2) 
0 % 
— 
31.12.2024 
0.5034 
ex 2930 90 98 
65 
Pentaerythritol  tetrakis(3-mercaptopropionate)  (CAS  RN  7575-23-7) 
0 % 
— 
31.12.2022 
0.4296 
ex 2930 90 98 
68 
Clethodim  (ISO)  (CAS  RN  99129-21-2) 
0 % 
— 
31.12.2022 
0.3986 
ex 2930 90 98 
77 
4-[4-(2-Propenyloxy)phenylsulphonyl]phenol  (CAS  RN  97042-18-7) 
0 % 
— 
31.12.2023 
0.4187 
ex 2930 90 98 
78 
4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol  (CAS  RN  131538-00-6) 
0 % 
— 
31.12.2021 
0.2999 
ex 2930 90 98 
80 
Captan  (ISO)  (CAS  RN  133-06-2) 
0 % 
— 
31.12.2023 
02013R1387 
0.4694 
ex 2930 90 98 
81 
Disodium  hexamethylene-1,6-bisthiosulfate  dihydrate  (CAS  RN  5719-73-3) 
3 % 
— 
31.12.2024 
0.7037 
ex 2930 90 98 
85 
2-Methyl-1-(methylthio)-2-propanamine  (CAS  RN  36567-04-1) 
0 % 
— 
31.12.2021 
— 
EN 
0.4094 
ex 2930 90 98 
89 
Potassium-  or  sodium-salt  of  O-ethyl-,  O-isopropyl-,  O-butyl-,  O-isobutyl-  or  O-pentyl- 
0 % 
— 
31.12.2021 
dithiocarbonates 
— 
01.07.2020 
0.7070 
ex 2930 90 98 
93 
1-Hydrazino-3-(methylthio)propan-2-ol  (CAS  RN  14359-97-8) 
0 % 
— 
31.12.2021 
0.7078 
ex 2930 90 98 
95 
N-(cyclohexylthio)phthalimide  (CAS  RN  17796-82-6) 
0 % 
— 
31.12.2021 
— 
013.001 
0.7086 
ex 2930 90 98 
97 
Diphenyl  sulphone  (CAS  RN  127-63-9) 
0 % 
— 
31.12.2021 
— 
0.5741 
ex 2931 39 90 
08 
Sodium  diisobutyldithiophosphinate  (CAS  RN  13360-78-6)  in  an  aqueous  solution 
0 % 
— 
31.12.2022 
62
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5492 
ex 2931 39 90 
13 
Trioctylphosphine  oxide  (CAS  RN  78-50-2) 
0 % 
— 
31.12.2021 
0.6088 
ex 2931 39 90 
23 
Di-tert-butylphosphane  (CAS  RN  819-19-2) 
0 % 
— 
31.12.2023 
0.5758 
ex 2931 39 90 
25 
(Z)-Prop-1-en-1-ylphosphonic  acid  (CAS  RN  25383-06-6) 
0 % 
— 
31.12.2022 
▼M13 
0.2656 
ex 2931 39 90 
38 
N-(Phosphonomethyl)iminodiacetic  acid  (CAS  RN  5994-61-6)  containing  by  weight  not 
0 % 
— 
31.12.2024 
more  than  15 %  of  water,  and  with  a  dry  weight  purity  of  97 %  or  more 
C3 
0.3497 
ex 2931 39 90 
30 
Bis(2,4,4-trimethylpentyl)phosphinic  acid  (CAS  RN  83411-71-6) 
0 % 
— 
31.12.2023 
0.7533 
ex 2931 39 90 
35 
Ethyl  phenyl(2,4,6-trimethylbenzoyl)phosphinate  (CAS  RN  84434-11-7) 
0 % 
— 
31.12.2023 
02013R1387 
0.5229 
ex 2931 39 90 
40 
Tetrakis(hydroxymethyl)phosphonium  chloride  (CAS  RN  124-64-1) 
0 % 
— 
31.12.2021 
0.4433 
ex 2931 39 90 
45 
Diphenyl(2,4,6-trimethylbenzoyl)phosphine  oxide  (CAS  RN  75980-60-8) 
0 % 
— 
31.12.2023 
— 
0.3492 
ex 2931 39 90 
48 
Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4) 
0 % 
— 
31.12.2024 
EN 
0.7709 
ex 2931 39 90 
50 
2-Chloroethylphosphonic  acid (CAS RN 16672-87-0) solid or in aqueous solution, with a 
0 % 
— 
31.12.2024 
— 
content  by  weight  of  2-Chloroethylphosphonic  acid  of  65 %  or  more 
01.07.2020 
0.3987 
ex 2931 39 90 
55 
3-(Hydroxyphenylphosphinoyl)propionic  acid  (CAS  RN  14657-64-8) 
0 % 
— 
31.12.2023 
0.6608 
ex 2931 39 90 
57 
Trimethyl  phosphonoacetate  (CAS  RN  5927-18-4) 
0 % 
— 
31.12.2020 
— 
013.001 
0.3504 
ex 2931 90 00 
03 
Butylethylmagnesium  (CAS  RN  62202-86-2),  in  the  form  of  a  solution  in  heptane 
0 % 
— 
31.12.2023 
— 
0.4905 
ex 2931 90 00 
05 
Diethylmethoxyborane  (CAS RN  7397-46-8),  whether or not in the form of a solution  in 
0 % 
— 
31.12.2020 
tetrahydrofuran  according  to  note  1e  to  Chapter  29  of  the  CN 
63
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7354 
ex 2931 90 00 
10 
(3-fluoro-5-isobutoxyphenyl)boronic  acid  (CAS  RN  850589-57-0) 
0 % 
— 
31.12.2022 
0.4515 
ex 2931 90 00 
15 
Methylcyclopentadienyl  manganese  tricarbonyl  (CAS  RN  12108-13-3)  containing  not 
0 % 
— 
31.12.2024 
more  than  4,9 %  by  weight  of  cyclopentadienyl  manganese  tricarbonyl 
0.7320 
ex 2931 90 00 
20 
Ferrocene  (CAS  RN  102-54-5) 
0 % 
— 
31.12.2022 
0.3499 
ex 2931 90 00 
33 
Dimethyl[dimethylsilyldiindenyl]hafnium  (CAS  RN  220492-55-7) 
0 % 
— 
31.12.2024 
0.2654 
ex 2931 90 00 
35 N,N-Dimethylanilinium  tetrakis(pentafluorophenyl)borate  (CAS  RN  118612-00-3) 
0 % 
— 
31.12.2024 
0.4121 
ex 2931 90 00 
50 
Trimethylsilane  (CAS  RN  993-07-7) 
0 % 
— 
31.12.2021 
0.6916 
ex 2931 90 00 
60 
4-Chloro-2-fluoro-3-methoxyphenylboronic  acid  (CAS  RN  944129-07-1) 
0 % 
— 
31.12.2020 
02013R1387 
0.6917 
ex 2931 90 00 
63 
Chloroethenyldimethylsilane  (CAS  RN  1719-58-0) 
0 % 
— 
31.12.2020 
0.6946 
ex 2931 90 00 
65 
Bis(4-tert-butylphenyl)iodonium  hexafluorophosphate  (CAS  RN  61358-25-6) 
0 % 
— 
31.12.2020 
— 
EN 
0.6928 
ex 2931 90 00 
67 
Dimethyltin  dioleate  (CAS  RN  3865-34-7) 
0 % 
— 
31.12.2020 
— 
01.07.2020 
0.6795 
ex 2931 90 00 
70 
(4-Propylphenyl)boronic  acid  (CAS  RN  134150-01-9) 
0 % 
— 
31.12.2020 
0.3486 
ex 2932 13 00 
10 
Tetrahydrofurfuryl  alcohol  (CAS  RN  97-99-4) 
0 % 
— 
31.12.2023 
— 
013.001 
0.4590 
ex 2932 14 00 
10 
1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside 
0 % 
— 
31.12.2024 
(CAS  RN  56038-13-2) 
— 
0.6787 
ex 2932 19 00 
20 
Tetrahydrofuran-borane  (CAS  RN  14044-65-6) 
0 % 
— 
31.12.2020 
64
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3488 
ex 2932 19 00 
40 
Furan  (CAS  RN  110-00-9)  of  a  purity  by  weight  of  99 %  or  more 
0 % 
— 
31.12.2024 
0.4514 
ex 2932 19 00 
41 
2,2  Di(tetrahydrofuryl)propane  (CAS  RN  89686-69-1) 
0 % 
— 
31.12.2024 
0.7614 
ex 2932 19 00 
65 
Tefuryltrione  (ISO)  (CAS  RN  473278-76-1) 
0 % 
— 
31.12.2023 
0.3487 
ex 2932 19 00 
70 
Furfurylamine  (CAS  RN  617-89-0) 
0 % 
— 
31.12.2024 
0.3611 
ex 2932 19 00 
75 
Tetrahydro-2-methylfuran  (CAS  RN  96-47-9) 
0 % 
— 
31.12.2023 
0.5240 
ex 2932 19 00 
80 
5-Nitrofurfurylidene  di(acetate)  (CAS  RN  92-55-7) 
0 % 
— 
31.12.2021 
0.2775 
ex 2932 20 90 
10 
2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3- 
0 % 
— 
31.12.2023 
one  (CAS  RN  70516-41-5) 
0.5257 
ex 2932 20 90 
15 
Coumarin  (CAS  RN  91-64-5) 
0 % 
— 
31.12.2021 
0.5611 
ex 2932 20 90 
40 
(S)-(–)-α-Amino-γ-butyrolactone  hydrobromide  (CAS  RN  15295-77-9) 
0 % 
— 
31.12.2022 
02013R1387 
0.6094 
ex 2932 20 90 
45 
2,2-Dimethyl-1,3-dioxane-4,6-dione  (CAS  RN  2033-24-1) 
0 % 
— 
31.12.2023 
0.7283 
ex 2932 20 90 
50 
L-Lactide  (CAS  RN  4511-42-6)  or  D-Lactide  (CAS  RN  13076-17-0)  or  dilactide  (CAS 
0 % 
— 
31.12.2022 
RN  95-96-5) 
— 
EN 
▼M13 
— 
0.7838 
ex 2932 20 90 
53 
(R)-4-propyldihydrofuran-2(3H)-one  (CAS  RN  63095-51-2)  with  a  purity  by  weight  of 
0 % 
— 
31.12.2024 
01.07.2020 
98 %  or  more 
C3 
— 
0.2765 
ex 2932 20 90 
55 
6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide  (CAS  RN  1552-42-7) 
0 % 
— 
31.12.2023 
013.001 
0.4162 
ex 2932 20 90 
60 
6'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]- 
0 % 
— 
31.12.2021 
3-one  (CAS  RN  29512-49-0) 
— 
0.7812 
ex 2932 20 90 
63 
Selamectin  (INN)  5Z-isomer  (CAS  RN  220119-17-5) 
0 % 
— 
31.12.2024 
65
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6620 
ex 2932 20 90 
65 
Sodium  4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate  (CAS  RN  1134960-41-0) 
0 % 
— 
31.12.2020 
0.4161 
ex 2932 20 90 
71 
6'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]- 
0 % 
— 
31.12.2021 
3-one  (CAS  RN  89331-94-2) 
0.7599 
ex 2932 20 90 
75 
3-Acetyl-6-methyl-2H-pyran-2,  4(3H)-dione  (CAS  RN  520-45-6) 
0 % 
— 
31.12.2023 
0.3990 
ex 2932 20 90 
80 
Gibberellic  acid  with  a  minimum  purity  by  weight  of  88 %  (CAS  RN  77-06-5) 
0 % 
— 
31.12.2023 
0.4403 
ex 2932 20 90 
84 
Decahydro-3a,6,6,9a-tetramethylnaphth  [2,1-b]  furan-2  (1H)-one  (CAS  RN  564-20-5) 
0 % 
— 
31.12.2023 
0.3610 
ex 2932 99 00 
10 
Bendiocarb  (ISO)  (CAS  RN  22781-23-3) 
0 % 
— 
31.12.2023 
0.7202 
ex 2932 99 00 
13 
(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy  2,2-dimethyltetrahydro­
0 % 
— 
31.12.2021 
furo[2,3-d][1,3]dioxol-5-yl)methanone  (CAS  RN  1103738-30-2) 
02013R1387 
0.5269 
ex 2932 99 00 
15 
1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran  (CAS  RN  1222-05-5) 
0 % 
— 
31.12.2021 
— 
0.7178 
ex 2932 99 00 
18 
4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile 
(CAS 
RN 
0 % 
— 
31.12.2021 
EN 
943311-78-2) 
— 
01.07.2020 
0.5387 
ex 2932 99 00 
20 
Ethyl-2-methyl-1,3-dioxolane-2-acetate  (CAS  RN  6413-10-1) 
0 % 
— 
31.12.2021 
0.7431 
ex 2932 99 00 
23 
2-ethyl-3-hydroxy-4-pyrone  (CAS  RN  4940-11-8) 
0 % 
— 
31.12.2022 
— 
013.001 
0.5759 
ex 2932 99 00 
25 
1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic 
acid 
(CAS 
RN 
0 % 
— 
31.12.2022 
862574-88-7) 
— 
0.7639 
ex 2932 99 00 
27 
(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone  (CAS  RN  1951-26-4) 
0 % 
— 
31.12.2023 
66
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7535 
ex 2932 99 00 
33 
3-hydroxy-2-methyl-4-pyrone  (CAS  RN  118-71-8) 
0 % 
— 
31.12.2023 
▼M13 
0.7855 
ex 2932 99 00 
37 
4-(2-butyl-1-benzofuran-3-carbonyl)-2,6-diiodophenol  (CAS RN  1951-26-4)  with a purity 
0 % 
— 
31.12.2024 
by  weight  of  99 %  or  more 
C3 
0.6243 
ex 2932 99 00 
43 
Ethofumesate  (ISO)  (CAS  RN  26225-79-6)  with  a  purity  by  weight  of  97 %  or  more 
0 % 
— 
31.12.2024 
0.5915 
ex 2932 99 00 
45 
2-Butylbenzofuran  (CAS  RN  4265-27-4) 
0 % 
— 
31.12.2024 
0.7766 
ex 2932 99 00 
47 
12H-[1]Benzofuro[3,2-c][1]benzoxepin-6-one  (CAS  RN  28763-77-1) 
0 % 
— 
31.12.2024 
0.4907 
ex 2932 99 00 
50 
7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one  (CAS  RN  28940-11-6) 
0 % 
— 
31.12.2020 
0.6113 
ex 2932 99 00 
53 
1,3-Dihydro-1,3-dimethoxyisobenzofurane  (CAS  RN  24388-70-3) 
0 % 
— 
31.12.2023 
0.6771 
ex 2932 99 00 
65 
4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane  (CAS  RN  57280-22-5) 
0 % 
— 
31.12.2020 
0.4105 
ex 2932 99 00 
70 
1,3:2,4-bis-O-Benzylidene-D-glucitol  (CAS  RN  32647-67-9) 
0 % 
— 
31.12.2021 
0.4063 
ex 2932 99 00 
75 
3-(3,4-Methylenedioxyphenyl)-2-methylpropanal  (CAS  RN  1205-17-0) 
0 % 
— 
31.12.2021 
02013R1387 
0.4106 
ex 2932 99 00 
80 
1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol  (CAS  RN  81541-12-0) 
0 % 
— 
31.12.2023 
0.3697 
ex 2932 99 00 
85 
1,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol  (CAS  RN  135861-56-2) 
0 % 
— 
31.12.2023 
▼M13 
— 
EN 
0.7903 
ex 2933 19 90 
13 
3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl 
fluoride 
(CAS 
RN 
0 % 
— 
31.12.2024 
1255735-07-9)  with  a  purity  by  weight  of  95 %  or  more 
— 
01.07.2020 
C3 
0.6262 
ex 2933 19 90 
15 
Pyrasulfotole  (ISO)  (CAS  RN  365400-11-9)  with  a  purity  by  weight  of  96 %  or  more 
0 % 
— 
31.12.2024 
▼M13 
— 
0.7835 
ex 2933 19 90 
17 
1,3-dimethyl-1H-pyrazole  (CAS  RN  694-48-4)  with  a  purity  by  weight  of  98 %  or  more 
0 % 
— 
31.12.2024 
013.001 
0.7918 
ex 2933 19 90 
23 
Fluindapyr  (ISO)  (CAS  RN  1383809-87-7)  with  a  purity  by  weight  of  96 %  or  more 
0 % 
— 
31.12.2024 
C3 
— 
67
0.6261 
ex 2933 19 90 
25 
3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic  acid  (CAS  RN  176969-34-9) 
0 % 
— 
31.12.2024 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7836 
ex 2933 19 90 
27 
3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic 
acid 
(CAS 
RN 
0 % 
— 
31.12.2024 
2229861-20-3)  with  a  purity  by  weight  of  95 %  or  more 
C3 
0.3699 
ex 2933 19 90 
30 
3-Methyl-1-p-tolyl-5-pyrazolone  (CAS  RN  86-92-0) 
0 % 
— 
31.12.2023 
0.6626 
ex 2933 19 90 
35 
1,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl  fluoride  (CAS  RN  191614-02-5) 
0 % 
— 
31.12.2020 
0.3877 
ex 2933 19 90 
40 
Edaravone  (INN)  (CAS  RN  89-25-8) 
0 % 
— 
31.12.2023 
0.7119 
ex 2933 19 90 
45 
5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile  (CAS  RN 
0 % 
— 
31.12.2021 
120068-79-3) 
0.3992 
ex 2933 19 90 
50 
Fenpyroximate  (ISO)  (CAS  RN  134098-61-6) 
0 % 
— 
31.12.2024 
0.7182 
ex 2933 19 90 
55 
5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one  (CAS  RN  1192140-15-0) 
0 % 
— 
31.12.2021 
0.4494 
ex 2933 19 90 
60 
Pyraflufen-ethyl  (ISO)  (CAS  RN  129630-19-9) 
0 % 
— 
31.12.2024 
0.7576 
ex 2933 19 90 
65 
4-Bromo-1-(1-ethoxyethyl)-1H-pyrazole  (CAS  RN  1024120-52-2) 
0 % 
— 
31.12.2023 
02013R1387 
0.4404 
ex 2933 19 90 
70 
4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate  (CAS  RN  155601-30-2) 
0 % 
— 
31.12.2023 
▼M13 
0.7811 
ex 2933 19 90 
33 
Fipronil  (ISO) (CAS  RN  120068-37-3)  with  a  purity  by  weight  of  95 %  or  more  for  the 
0 % 
— 
31.12.2024 
— 
use  in  the  manufacture  of  veterinary  medicine (2 ) 
EN 
_____ 
— 
01.07.2020 
C3 
0.4084 
ex 2933 21 00 
50 
1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6) 
0 % 
— 
31.12.2021 
0.6835 
ex 2933 21 00 
55 
1-Aminohydantoin  hydrochloride  (CAS  RN  2827-56-7) 
0 % 
— 
31.12.2020 
— 
013.001 
0.4088 
ex 2933 21 00 
60 
DL-p-Hydroxyphenylhydantoin  (CAS  RN  2420-17-9) 
0 % 
— 
31.12.2021 
0.5115 
ex 2933 21 00 
80 
5,5-Dimethylhydantoin  (CAS  RN  77-71-4) 
0 % 
— 
31.12.2020 
— 
0.5972 
ex 2933 29 90 
15 
Ethyl  4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate  (CAS  RN  144689- 
0 % 
— 
31.12.2023 
68
93-0) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7527 
ex 2933 29 90 
18 
2-(2-chlorophenyl)-1-[2-(2-chlorophenyl)-4,5-diphenyl-2H-imidazol-2-yl]-4,5-diphenyl- 
0 % 
— 
31.12.2023 
1H-imidazole  (CAS  RN  7189-82-4) 
0.5920 
ex 2933 29 90 
25 
Prochloraz  (ISO)  (CAS  RN  67747-09-5) 
0 % 
— 
31.12.2023 
0.5921 
ex 2933 29 90 
45 
Prochloraz  copper  chloride  (ISO)  (CAS  RN  156065-03-1) 
0 % 
— 
31.12.2023 
0.2752 
ex 2933 29 90 
50 
1,3-Dimethylimidazolidin-2-one  (CAS  RN  80-73-9) 
0 % 
— 
31.12.2023 
0.6263 
ex 2933 29 90 
55 
Fenamidone  (ISO)  (CAS  RN  161326-34-7)  with  a  purity  by  weight  of  97 %  or  more 
0 % 
— 
31.12.2024 
0.5215 
ex 2933 29 90 
60 
1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea  (CAS  RN 
0 % 
— 
31.12.2021 
52378-40-2) 
0.6758 
ex 2933 29 90 
65 
(S)-tert-Butyl 
2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate 
(CAS 
RN 
0 % 
— 
31.12.2020 
1007882-59-8) 
02013R1387 
0.5470 
ex 2933 29 90 
70 
Cyazofamid  (ISO)  (CAS  RN  120116-88-3) 
0 % 
— 
31.12.2021 
0.7120 
ex 2933 29 90 
75 
2,2'-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride  (CAS  RN  27776-21-2) 
0 % 
— 
31.12.2021 
— 
EN 
0.5821 
ex 2933 29 90 
80 
Imazalil  (ISO)  (CAS  RN  35554-44-0) 
0 % 
— 
31.12.2022 
— 
01.07.2020 
0.6415 
2933 39 50 
Fluroxypyr  (ISO)  methyl  ester  (CAS  RN  69184-17-4) 
0 % 
— 
31.12.2024 
0.7186 
ex 2933 39 99 
10 
2-Aminopyridin-4-ol  hydrochloride  (CAS  RN  1187932-09-7) 
0 % 
— 
31.12.2021 
— 
013.001 
0.6462 
ex 2933 39 99 
11 
2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine 
hydrochloride(CAS 
RN 
0 % 
— 
31.12.2024 
153259-31-5) 
— 
0.5608 
ex 2933 39 99 
12 
2,3-Dichloropyridine  (CAS  RN  2402-77-9) 
0 % 
— 
31.12.2022 
69
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6756 
ex 2933 39 99 
13 
Methyl 
(1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate 
0 % 
— 
31.12.2020 
(CAS  RN  130194-96-6) 
0.6812 
ex 2933 39 99 
14 
N,4-Dimethyl-1-(phenylmethyl)-  3-piperidinamine  hydrochloride  (1:2)  (CAS  RN 
0 % 
— 
31.12.2020 
1228879-37-5) 
0.6788 
ex 2933 39 99 
16 
Methyl  (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate  dihydrochloride  (CAS  RN 
0 % 
— 
31.12.2020 
1501976-34-6) 
0.6941 
ex 2933 39 99 
17 
3,5-Dimethylpyridine  (CAS  RN  591-22-0) 
0 % 
— 
31.12.2020 
0.6902 
ex 2933 39 99 
19 
Methyl  nicotinate  (INNM)  (CAS  RN  93-60-7) 
0 % 
— 
31.12.2020 
0.4842 
ex 2933 39 99 
20 
Copper  pyrithione  powder  (CAS  RN  14915-37-8) 
0 % 
— 
31.12.2020 
0.6545 
ex 2933 39 99 
21 
Boscalid  (ISO)  (CAS  RN  188425-85-6) 
0 % 
— 
31.12.2024 
02013R1387 
0.6900 
ex 2933 39 99 
23 
2-Chloro-3-cyanopyridine  (CAS  RN  6602-54-6) 
0 % 
— 
31.12.2020 
0.4594 
ex 2933 39 99 
24 
2-Chloromethyl-4-methoxy-3,5-dimethylpyridine  hydrochloride  (CAS  RN  86604-75-3) 
0 % 
— 
31.12.2024 
— 
EN 
0.3604 
ex 2933 39 99 
25 
Imazethapyr  (ISO)  (CAS  RN  81335-77-5) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.6813 
ex 2933 39 99 
26 
2-[4-(Hydrazinylmethyl)phenyl]-pyridine  dihydrochloride  (CAS  RN  1802485-62-6) 
0 % 
— 
31.12.2020 
0.7091 
ex 2933 39 99 
27 
Pyridine-2,6-dicarboxylic  acid  (CAS  RN  499-83-2) 
0 % 
— 
31.12.2021 
— 
013.001 
0.6368 
ex 2933 39 99 
28 
Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate  (CAS  RN 
0 % 
— 
31.12.2024 
212322-56-0) 
— 
0.6966 
ex 2933 39 99 
29 
3,5-Dichloro-2-cyanopyridine  (CAS  RN  85331-33-5) 
0 % 
— 
31.12.2021 
70
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6458 
ex 2933 39 99 
31 
2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine 
hydrochloride(CAS 
RN 
0 % 
— 
31.12.2024 
127337-60-4) 
0.5241 
ex 2933 39 99 
32 
2-(Chloromethyl)-3,4-dimethoxypyridine  hydrochloride  (CAS  RN  72830-09-2) 
0 % 
— 
31.12.2021 
0.7181 
ex 2933 39 99 
33 
5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile  (CAS  RN  1415226-39-9) 
0 % 
— 
31.12.2021 
0.3878 
ex 2933 39 99 
35 
Aminopyralid  (ISO)  (CAS  RN  150114-71-9) 
0 % 
— 
31.12.2023 
0.7296 
ex 2933 39 99 
36 
1-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide 
0 % 
— 
31.12.2022 
(CAS  RN  1003319-95-6) 
0.5230 
ex 2933 39 99 
37 
Aqueous  solution  of  pyridine-2-thiol-1-oxide,  sodium  salt  (CAS  RN  3811-73-2) 
0 % 
— 
31.12.2021 
0.7348 
ex 2933 39 99 
38 
(2-chloropyridin-3-yl)  methanol  (CAS  RN  42330-59-6) 
0 % 
— 
31.12.2022 
02013R1387 
0.7349 
ex 2933 39 99 
39 
2,6-dichloropyridine-3-carboxamide  (CAS  RN  62068-78-4) 
0 % 
— 
31.12.2022 
0.7184 
ex 2933 39 99 
41 
2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic  acid  (CAS  RN  1897387-01-7) 
0 % 
— 
31.12.2021 
— 
EN 
0.7121 
ex 2933 39 99 
46 
Fluopicolide  (ISO)  (CAS  RN  239110-15-7)  with  a  content  by  weight  of  97 %  or  more 
0 % 
— 
31.12.2021 
— 
01.07.2020 
0.4706 
ex 2933 39 99 
47 
(-)-trans-4-(4'-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine 
(CAS 
RN 
0 % 
— 
31.12.2021 
105812-81-5) 
0.4749 
ex 2933 39 99 
48 
Flonicamid  (ISO)  (CAS  RN  158062-67-0) 
0 % 
— 
31.12.2024 
— 
013.001 
0.7352 
ex 2933 39 99 
51 
2,5-Dichloro-4,6-dimethylnicotinonitrile  (CAS  RN  91591-63-8) 
0 % 
— 
31.12.2022 
— 
0.5610 
ex 2933 39 99 
52 
6-Chloro-3-nitropyridin-2-ylamine  (CAS  RN  27048-04-0) 
0 % 
— 
31.12.2023 
71
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7456 
ex 2933 39 99 
54 
4-methyl-2-pyridylamine  (CAS  RN  695-34-1) 
0 % 
— 
31.12.2023 
0.4646 
ex 2933 39 99 
55 
Pyriproxyfen  (ISO)  (CAS  RN  95737-68-1)  of  a  purity  by  weight  of  97 %  or  more 
0 % 
— 
31.12.2024 
0.5760 
ex 2933 39 99 
57 Tert-butyl  3-(6-amino-3-methylpyridin-2-yl)benzoate  (CAS  RN  1083057-14-0) 
0 % 
— 
31.12.2022 
0.7598 
ex 2933 39 99 
59 
Chlorpyrifos-Methyl  (ISO)  (CAS  RN  5598-13-0) 
0 % 
— 
31.12.2023 
0.2750 
ex 2933 39 99 
60 
2-Fluoro-6-(trifluoromethyl)pyridine (CAS  RN  94239-04-0) 
0 % 
— 
31.12.2023 
0.7584 
ex 2933 39 99 
61 
6-Bromopyridin-2-amine  (CAS  RN  19798-81-3) 
0 % 
— 
31.12.2023 
0.7577 
ex 2933 39 99 
62 
Ethyl  2,6-Dichloronicotinate  (CAS  RN  58584-86-4) 
0 % 
— 
31.12.2023 
0.7617 
ex 2933 39 99 
64 
Methyl  1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate  (CAS  RN 
0 % 
— 
31.12.2023 
02013R1387 
960316-73-8) 
0.3602 
ex 2933 39 99 
65 
Acetamiprid  (ISO)  (CAS  RN  135410-20-7) 
0 % 
— 
31.12.2023 
— 
0.5946 
ex 2933 39 99 
67 
(1R,3S,4S)-tert-Butyl  3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane- 
0 % 
— 
31.12.2023 
EN 
2-carboxylate  (CAS  RN  1256387-74-2) 
— 
01.07.2020 
0.7616 
ex 2933 39 99 
68 
1-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl) -2H-tetrazol-2-yl]methyl]-1H-pyrazole-5- 
0 % 
— 
31.12.2023 
carboxylic  acid  (CAS  RN  1352319-02-8)  with  a  purity  by  weight  of  85 %  or  more 
0.5494 
ex 2933 39 99 
70 
2,3-Dichloro-5-trifluoromethylpyridine  (CAS  RN  69045-84-7) 
0 % 
— 
31.12.2021 
— 
013.001 
0.7704 
ex 2933 39 99 
71 
Diflufenican  (ISO)  (CAS  RN  83164-33-4) 
0 % 
— 
31.12.2024 
— 
0.5462 
ex 2933 39 99 
72 
5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one  (CAS  RN  120014-30-4) 
0 % 
— 
31.12.2021 
72
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7737 
ex 2933 39 99 
73 
6-Chloro-4-(4-fluoro-2-methylphenyl)pyridin-3-amine  hydrochloride 
0 % 
— 
31.12.2024 
▼M13 
0.7844 
ex 2933 39 99 
74 
4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % 
0 % 
— 
31.12.2024 
or  more 
C3 
0.7813 
ex 2933 39 99 
76 
Apalutamide  (INN)  (CAS  RN  956104-40-8) 
0 % 
— 
31.12.2024 
0.5922 
ex 2933 39 99 
77 
Imazamox  (ISO)  (CAS  RN  114311-32-9) 
0 % 
— 
31.12.2023 
0.7818 
ex 2933 39 99 
78 
Niraparib  tosylate  monohydrate  (INNM)  (CAS  RN  1613220-15-7) 
0 % 
— 
31.12.2024 
0.7754 
ex 2933 39 99 
79 
Avibactam  (INN)  –  sodium  (CAS  RN  1192491-61-4) 
0 % 
— 
31.12.2024 
▼M13 
0.7906 
ex 2933 39 99 
81 
4-Hydroxy-3-pyridinesulphonic  acid  (CAS  RN  51498-37-4)  with  a  purity  by  weight  of 
0 % 
— 
31.12.2024 
98 %  or  more 
02013R1387 
0.7866 
ex 2933 39 99 
82 
Picloram (ISO) (CAS RN  1918-02-1)  containing by  weight not more than 15 % of water 
0 % 
— 
31.12.2024 
and  with  a  purity  by  dry  weight  of  92 %  or  more 
C3 
0.5129 
ex 2933 39 99 
85 
2-Chloro-5-chloromethylpyridine  (CAS  RN  70258-18-3) 
0 % 
— 
31.12.2020 
— 
EN 
0.3603 
ex 2933 49 10 
10 
Quinmerac  (ISO)  (CAS  RN  90717-03-6) 
0 % 
— 
31.12.2023 
— 
0.4525 
ex 2933 49 10 
20 
3-Hydroxy-2-methylquinoline-4-carboxylic  acid  (CAS  RN  117-57-7) 
0 % 
— 
31.12.2023 
01.07.2020 
0.5761 
ex 2933 49 10 
30 
Ethyl  4-oxo-1,4-dihydroquinoline-3-carboxylate  (CAS  RN  52980-28-6) 
0 % 
— 
31.12.2022 
0.6339 
ex 2933 49 10 
40 
4,7-Dichloroquinoline  (CAS  RN  86-98-6) 
0 % 
— 
31.12.2024 
— 
0.6773 
ex 2933 49 10 
50 
1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic  acid  (CAS  RN 
0 % 
— 
31.12.2020 
013.001 
94695-52-0) 
0.7500 
ex 2933 49 10 
60 
Roxadustat  (INN)  (CAS  RN  808118-40-3) 
0 % 
— 
31.12.2023 
ex 2933 49 90 
65 
— 
73
0.7098 
ex 2933 49 90 
25 
Cloquintocet-mexyl  (ISO)  (CAS  RN  99607-70-2) 
0 % 
— 
31.12.2021 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4927 
ex 2933 49 90 
30 
Quinoline  (CAS  RN  91-22-5) 
0 % 
— 
31.12.2020 
▼M13  _____ 
C3 
0.4926 
ex 2933 49 90 
40 
Isoquinoline  (CAS  RN  119-65-3) 
0 % 
— 
31.12.2020 
0.7524 
ex 2933 49 90 
45 
6,7-Dimethoxy-3,4-  dihydroisoquinoline  hydrochloride  (CAS  RN  20232-39-7) 
0 % 
— 
31.12.2023 
0.3880 
ex 2933 49 90 
70 
Quinolin-8-ol  (CAS  RN  148-24-3) 
0 % 
— 
31.12.2023 
0.6087 
ex 2933 49 90 
80 
Ethyl  6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate 
0 % 
— 
31.12.2020 
(CAS  RN  100276-65-1) 
0.4043 
ex 2933 52 00 
10 
Malonylurea  (barbituric  acid)  (CAS  RN  67-52-7) 
0 % 
— 
31.12.2021 
02013R1387 
0.7631 
ex 2933 54 00 
10 
5,5'-(1,2-diazenediyl)bis  [2,4,6  (1H,  3H,  5H)-pyrimidinetrione]  (CAS  RN  25157-64-6) 
0 % 
— 
31.12.2023 
0.6468 
ex 2933 59 95 
10 
6-Amino-1,3-dimethyluracil  (CAS  RN  6642-31-5) 
0 % 
— 
31.12.2024 
— 
0.6151 
ex 2933 59 95 
13 
2-Diethylamino-6-hydroxy-4-methylpyrimidine  (CAS  RN  42487-72-9) 
0 % 
— 
31.12.2023 
EN 
0.2578 
ex 2933 59 95 
15 
Sitagliptin  phosphate  monohydrate  (CAS  RN  654671-77-9) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.6895 
ex 2933 59 95 
18 
1-Methyl-3-phenylpiperazine  (CAS  RN  5271-27-2) 
0 % 
— 
31.12.2020 
0.2745 
ex 2933 59 95 
20 
2,4-Diamino-6-chloropyrimidine  (CAS  RN  156-83-2) 
0 % 
— 
31.12.2023 
— 
0.6763 
ex 2933 59 95 
21 
N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide  (CAS  RN  26661-13-2) 
0 % 
— 
31.12.2020 
013.001 
0.7370 
ex 2933 59 95 
22 
6-chloro-1,3-dimethyluracil  (CAS  RN  6972-27-6) 
0 % 
— 
31.12.2022 
— 
0.7345 
ex 2933 59 95 
24 
1-(Cyclopropylcarbonyl)piperazine  hydrochloride  (CAS  RN  1021298-67-8) 
0 % 
— 
31.12.2022 
74
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7392 
ex 2933 59 95 
26 
5-Fluoro-4-hydrazino-2-methoxypyrimidine  (CAS  RN  166524-64-7) 
0 % 
— 
31.12.2022 
0.5912 
ex 2933 59 95 
27 
2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate 
(CAS 
0 % 
— 
31.12.2023 
RN  88110-89-8) 
0.7810 
ex 2933 59 95 
28 
6,8-Difluoro-1-(methylamino)-7-(4-methylpiperazin-1-yl)-4-oxo-1,4-dihydroquinoline-3- 
0 % 
— 
31.12.2024 
carboxylic  acid  (CAS  RN  100276-37-7) 
0.3600 
ex 2933 59 95 
30 
Mepanipyrim  (ISO)  (CAS  RN  110235-47-7) 
0 % 
— 
31.12.2023 
0.6240 
ex 2933 59 95 
33 
4,6-Dichloro-5-fluoropyrimidine  (CAS  RN  213265-83-9) 
0 % 
— 
31.12.2024 
0.6419 
ex 2933 59 95 
37 
6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one  (CAS  RN  200938-58-5) 
0 % 
— 
31.12.2024 
0.4704 
ex 2933 59 95 
45 
1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine  (CAS  RN  61337-89-1) 
0 % 
— 
31.12.2024 
02013R1387 
0.6677 
ex 2933 59 95 
47 
6-Methyl-2-oxoperhydropyrimidin-4-ylurea  (CAS  RN  1129-42-6)  with  a  purity  of  94 % 
0 % 
— 
31.12.2020 
or  more 
0.4699 
ex 2933 59 95 
50 
2-(2-Piperazin-1-ylethoxy)ethanol  (CAS  RN  13349-82-1) 
0 % 
— 
31.12.2024 
— 
EN 
0.6607 
ex 2933 59 95 
53 
5-Fluoro-2-methoxypyrimidin-4(3H)-one  (CAS  RN  1480-96-2) 
0 % 
— 
31.12.2020 
— 
01.07.2020 
0.6606 
ex 2933 59 95 
57 
5,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine  (CAS  RN  13223-43-3) 
0 % 
— 
31.12.2020 
0.2744 
ex 2933 59 95 
60 
2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine  (CAS  RN  7139-02-8) 
0 % 
— 
31.12.2023 
— 
013.001 
0.7578 
ex 2933 59 95 
63 
1-(3-Chlorophenyl)  piperazine  (CAS  RN  6640-24-0) 
0 % 
— 
31.12.2023 
0.4772 
ex 2933 59 95 
65 
1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane  bis(tetrafluoroborate) (CAS  RN 
0 % 
— 
31.12.2024 
— 
140681-55-6) 
75
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7825 
ex 2933 59 95 
68 
Guanine  (CAS  RN  73-40-5)  with  a  purity  by  weight  of  99 %  or  more 
0 % 
— 
31.12.2024 
C3 
0.2735 
ex 2933 59 95 
70 
N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine  (CAS  RN  63422-71-9) 
0 % 
— 
31.12.2023 
0.5542 
ex 2933 59 95 
77 
3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine  hydrochloride  (1:1) 
0 % 
— 
31.12.2022 
(CAS  RN  762240-92-6) 
0.7071 
ex 2933 59 95 
87 
5-Bromo-2,4-dichloropyrimidine  (CAS  RN  36082-50-5) 
0 % 
— 
31.12.2021 
0.6987 
ex 2933 59 95 
89 
6-Benzyladenine  (CAS  RN  1214-39-7) 
0 % 
— 
31.12.2021 
0.6774 
ex 2933 69 80 
13 
Metribuzin  (ISO)  (CAS  RN  21087-64-9)  with  a  purity  by  weight  of  93 %  or  more 
0 % 
— 
31.12.2020 
0.6621 
ex 2933 69 80 
15 
2-Chloro-4,6-dimethoxy-1,3,5-triazine  (CAS  RN  3140-73-6) 
0 % 
— 
31.12.2020 
02013R1387 
0.6951 
ex 2933 69 80 
17 
Benzoguanamine  (CAS  RN  91-76-9) 
0 % 
— 
31.12.2020 
0.7721 
ex 2933 69 80 
23 
1,3,5-tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione  (CAS  RN  52434-90-9) 
0 % 
— 
31.12.2024 
— 
EN 
0.7600 
ex 2933 69 80 
27 
Troclosene  sodium  dihydrate  (INNM)  (CAS  RN  51580-86-0) 
0 % 
— 
31.12.2023 
— 
0.5272 
ex 2933 69 80 
40 
Troclosene  sodium  (INNM)  (CAS  RN  2893-78-9) 
0 % 
— 
31.12.2021 
01.07.2020 
0.7464 
ex 2933 69 80 
45 
2-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol 
(CAS 
RN 
0 % 
— 
31.12.2023 
2725-22-6) 
— 
0.5131 
ex 2933 69 80 
55 
Terbutryn  (ISO)  (CAS  RN  886-50-0) 
0 % 
— 
31.12.2020 
013.001 
0.4957 
ex 2933 69 80 
60 
Cyanuric  acid  (CAS  RN  108-80-5) 
0 % 
— 
31.12.2020 
— 
0.6127 
ex 2933 69 80 
65 
1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione,  trisodium  salt  (CAS  RN  17766-26-6) 
0 % 
— 
31.12.2023 
76
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6477 
ex 2933 69 80 
75 
Metamitron  (ISO)  (CAS  RN  41394-05-2) 
0 % 
— 
31.12.2024 
0.3882 
ex 2933 69 80 
80 
Tris(2-hydroxyethyl)-1,3,5-triazinetrione  (CAS  RN  839-90-7) 
0 % 
— 
31.12.2023 
0.6960 
ex 2933 79 00 
15 
Ethyl  N-(tert-Butoxycarbonyl)-L-pyroglutamate  (CAS  RN  144978-12-1) 
0 % 
— 
31.12.2021 
0.7346 
ex 2933 79 00 
25 
Methyl  2-oxo-2,3-dihydro-1H-indole-6-carboxylate  (CAS  RN  14192-26-8) 
0 % 
— 
31.12.2022 
0.4294 
ex 2933 79 00 
30 
5-Vinyl-2-pyrrolidone  (CAS  RN  7529-16-0) 
0 % 
— 
31.12.2022 
0.7453 
ex 2933 79 00 
35 
1-tert-butyl  2-methyl(2S)-5-oxopyrrolidine-1,2-dicarboxylate  (CAS  RN  108963-96-8) 
0 % 
— 
31.12.2023 
0.4524 
ex 2933 79 00 
50 
6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione  (CAS  RN  81-85-6) 
0 % 
— 
31.12.2023 
02013R1387 
0.4985 
ex 2933 79 00 
70 
(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamideL-(+)-tartrate(CAS 
0 % 
— 
31.12.2020 
RN 754186-36-2) 
0.6563 
ex 2933 99 80 
11 
Fenbuconazole  (ISO)  (CAS  RN  114369-43-6) 
0 % 
— 
31.12.2024 
— 
EN 
0.6564 
ex 2933 99 80 
12 
Myclobutanil  (ISO)  (CAS  RN  88671-89-0) 
0 % 
— 
31.12.2024 
— 
01.07.2020 
0.5243 
ex 2933 99 80 
13 
5-Difluoromethoxy-2-mercapto-1-H-benzimidazole  (CAS  RN  97963-62-7) 
0 % 
— 
31.12.2021 
0.6146 
ex 2933 99 80 
14 
2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6) 
0 % 
— 
31.12.2023 
— 
013.001 
0.2731 
ex 2933 99 80 
15 
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol  (CAS  RN  25973-55-1) 
0 % 
— 
31.12.2023 
— 
0.6872 
ex 2933 99 80 
16 
Pyridate  (ISO)  (CAS  RN  55512-33-9)  with  a  purity  by  weight  of  90 %  or  more 
0 % 
— 
31.12.2020 
77
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6933 
ex 2933 99 80 
17 
Carfentrazone-ethyl  (ISO)  (CAS  RN  128639-02-1)  with  a  purity  by  weight  of  93 %  or 
0 % 
— 
31.12.2020 
more 
0.6567 
ex 2933 99 80 
19 
2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol  (CAS  RN  112281-82-0) 
0 % 
— 
31.12.2024 
0.2732 
ex 2933 99 80 
20 
2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol  (CAS  RN  70321-86-7) 
0 % 
— 
31.12.2023 
0.6829 
ex 2933 99 80 
21 
1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium  3-oxide  hexafluo­
0 % 
— 
31.12.2020 
rophosphate(V)  (CAS  RN  148893-10-1) 
0.6244 
ex 2933 99 80 
23 
Tebuconazole  (ISO)  (CAS  RN  107534-96-3)  with  a  purity  by  weight  of  95 %  or  more 
0 % 
— 
31.12.2024 
0.5625 
ex 2933 99 80 
24 
1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one  (CAS  RN  55621-49-3) 
0 % 
— 
31.12.2022 
0.6833 
ex 2933 99 80 
26 
(2S,3S,4R)-Methyl 
4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3- 
0 % 
— 
31.12.2020 
ethylpyrrolidine-2-carboxylate  4-methylbenzenesulfonate  (CUS  0143289-9) (5 ) 
02013R1387 
0.6409 
ex 2933 99 80 
27 
5,6-Dimethylbenzimidazole  (CAS  RN  582-60-5) 
0 % 
— 
31.12.2024 
0.6760 
ex 2933 99 80 
29 
3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal 
(CAS 
RN 
0 % 
— 
31.12.2020 
— 
93957-50-7) 
EN 
— 
0.3593 
ex 2933 99 80 
30 
Quizalofop-P-ethyl  (ISO)  (CAS  RN  100646-51-3) 
0 % 
— 
31.12.2023 
01.07.2020 
0.6775 
ex 2933 99 80 
31 
Triadimenol  (ISO)  (CAS  RN  55219-65-3)  with  a  purity  by  weight  of  97 %  or  more 
0 % 
— 
31.12.2020 
— 
0.6249 
ex 2933 99 80 
33 
Penconazole  (ISO)  (CAS  RN  66246-88-6) 
0 % 
— 
31.12.2024 
013.001 
0.7043 
ex 2933 99 80 
34 
2,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on  (CAS  RN  135302-13-5) 
0 % 
— 
31.12.2021 
— 
0.6958 
ex 2933 99 80 
36 
3-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline  (CAS  RN  1799733-46-2) 
0 % 
— 
31.12.2021 
78
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4695 
ex 2933 99 80 
37 
8-Chloro-5,10-dihydro-11H-dibenzo  [b,e]  [1,4]diazepin-11-one  (CAS  RN  50892-62-1) 
0 % 
— 
31.12.2024 
0.7045 
ex 2933 99 80 
38 
(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine  (CAS  RN  151213-40-0) 
0 % 
— 
31.12.2021 
0.6961 
ex 2933 99 80 
39 
O-(benzotriazol-1-yl)-N,N,N',N'-tetramethyluronium 
tetrafluoroborate 
(CAS 
RN 
0 % 
— 
31.12.2021 
125700-67-6) 
0.3591 
ex 2933 99 80 
40 trans-4-Hydroxy-L-proline  (CAS  RN  51-35-4) 
0 % 
— 
31.12.2023 
0.7273 
ex 2933 99 80 
41 
5-[4'-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole  (CAS  RN  124750-51-2) 
0 % 
— 
31.12.2022 
0.7185 
ex 2933 99 80 
42 
(S)-2,2,4-Trimethylpyrrolidine  hydrochloride  (CAS  RN  1897428-40-8) 
0 % 
— 
31.12.2021 
0.7177 
ex 2933 99 80 
44 
(2S,3S,4R)-Methyl 
3-ethyl-4-hydroxypyrrolidine-2-carboxylate 
4-methylbenzenesul­
0 % 
— 
31.12.2021 
phonate  (CAS  RN  1799733-43-9) 
02013R1387 
0.3582 
ex 2933 99 80 
45 
Maleic  hydrazide  (ISO)  (CAS  RN  123-33-1) 
0 % 
— 
31.12.2023 
0.7269 
ex 2933 99 80 
46 
(S)-indoline-2-carboxylic  acid  (CAS  RN  79815-20-6) 
0 % 
— 
31.12.2022 
— 
EN 
0.5818 
ex 2933 99 80 
47 
Paclobutrazol  (ISO)  (CAS  RN  76738-62-0) 
0 % 
— 
31.12.2022 
— 
01.07.2020 
0.7410 
ex 2933 99 80 
48 
5-Amino-6-methyl-2-benzimidazolone  (CAS  RN  67014-36-2) 
0 % 
— 
31.12.2022 
0.3580 
ex 2933 99 80 
50 
Metconazole  (ISO)  (CAS  RN  125116-23-6) 
3,2 % 
— 
31.12.2023 
— 
013.001 
0.6986 
ex 2933 99 80 
51 
Diquat  dibromide  (ISO)  (CAS  RN  85-00-7)  in  aqueous  solution  for  use  in  the  manu­
0 % 
— 
31.12.2021 
facture  of  herbicides (2 ) 
— 
0.6665 
ex 2933 99 80 
52 
N-Boc-trans-4-Hydroxy-L-proline  methyl  ester  (CAS  RN  74844-91-0) 
0 % 
— 
31.12.2020 
79
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5945 
ex 2933 99 80 
53 
Potassium  (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate  (CAS  RN 
0 % 
— 
31.12.2023 
1441673-92-2) (5 ) 
0.6599 
ex 2933 99 80 
54 
3-(Salicyloylamino)-1,2,4-triazole  (CAS  RN  36411-52-6) 
0 % 
— 
31.12.2020 
0.4585 
ex 2933 99 80 
55 
Pyridaben  (ISO)  (CAS  RN  96489-71-3) 
0 % 
— 
31.12.2024 
0.7457 
ex 2933 99 80 
56 
Methyl  3,5-diamino-6-chloropyrazine-2-carboxylate  (CAS  RN  1458-01-1) 
0 % 
— 
31.12.2023 
0.5901 
ex 2933 99 80 
57 
2-(5-Methoxyindol-3-yl)ethylamine  (CAS  RN  608-07-1) 
0 % 
— 
31.12.2023 
0.7649 
ex 2933 99 80 
58 
Ipconazole  (ISO)  (CAS  RN  125225-28-7)  with  a  purity  by  weight  of  90 %  or  more 
0 % 
— 
31.12.2023 
0.7673 
ex 2933 99 80 
59 
Hydrates  of  Hydroxybenzotriazole  (CAS  RN  80029-43-2  and  CAS  RN  123333-53-9) 
0 % 
— 
31.12.2023 
0.7624 
ex 2933 99 80 
61 
(1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one  hydrochloride  (CAS  RN  83393-23-1) 
0 % 
— 
31.12.2023 
0.7680 
ex 2933 99 80 
63 
L-Prolinamide  (CAS  RN  7531-52-4) 
0 % 
— 
31.12.2023 
02013R1387 
▼M13 
0.7839 
ex 2933 99 80 
66 
(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol  (CAS 
0 % 
— 
31.12.2024 
RN  1799327-42-6)  with  a  purity  by  weight  of  98 %  or  more 
— 
EN 
C3 
— 
0.5468 
ex 2933 99 80 
67 
Candesartan  ethyl  ester  (INNM)  (CAS  RN  139481-58-6) 
0 % 
— 
31.12.2021 
01.07.2020 
0.7679 
ex 2933 99 80 
68 
5-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-amino-20-((R)-3- 
0 % 
— 
31.12.2023 
amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16- 
methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2',1'- 
— 
l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl 
013.001 
hydrogen  sulphate  (CAS  RN  168110-44-9) 
0.4384 
ex 2933 99 80 
71 
10-Methoxyiminostilbene  (CAS  RN  4698-11-7) 
0 % 
— 
31.12.2023 
— 
0.4503 
ex 2933 99 80 
72 
1,4,7-Trimethyl-1,4,7-triazacyclononane  (CAS  RN  96556-05-7) 
0 % 
— 
31.12.2023 
80
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7759 
ex 2933 99 80 
75 
1-[Bis(dimethylamino)methylene]-1H-benzotriazolium  hexafluorophosphate(1-)  3-oxide 
0 % 
— 
31.12.2024 
(CAS  RN  94790-37-1) 
0.4382 
ex 2933 99 80 
78 
3-Amino-3-azabicyclo  (3.3.0)  octane  hydrochloride  (CAS  RN  58108-05-7) 
0 % 
— 
31.12.2023 
0.7814 
ex 2933 99 80 
79 
Upadacitinib  (INN)  (CAS  RN  1310726-60-3) 
0 % 
— 
31.12.2024 
0.4164 
ex 2933 99 80 
81 
1,2,3-Benzotriazole  (CAS  RN  95-14-7) 
0 % 
— 
31.12.2021 
0.4165 
ex 2933 99 80 
82 
Tolytriazole  (CAS  RN  29385-43-1) 
0 % 
— 
31.12.2023 
▼M13  _____ 
C3 
02013R1387 
0.3579 
ex 2934 10 00 
10 
Hexythiazox  (ISO)  (CAS  RN  78587-05-0) 
0 % 
— 
31.12.2023 
0.5531 
ex 2934 10 00 
15 
4-Nitrophenyl  thiazol-5-ylmethyl  carbonate  (CAS  RN  144163-97-3) 
0 % 
— 
31.12.2022 
— 
EN 
0.2725 
ex 2934 10 00 
20 
2-(4-Methylthiazol-5-yl)ethanol  (CAS  RN  137-00-8) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.5530 
ex 2934 10 00 
25 
(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate 
0 % 
— 
31.12.2022 
oxalate  (CAS  RN  1247119-36-3) 
0.5538 
ex 2934 10 00 
35 
(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8) 
0 % 
— 
31.12.2022 
— 
013.001 
0.6264 
ex 2934 10 00 
45 
2-Cyanimino-1,3-thiazolidine  (CAS  RN  26364-65-8) 
0 % 
— 
31.12.2024 
— 
0.4750 
ex 2934 10 00 
60 
Fosthiazate  (ISO)  (CAS  RN  98886-44-3) 
0 % 
— 
31.12.2024 
81
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5232 
ex 2934 10 00 
80 
3,4-Dichloro-5-carboxyisothiazole  (CAS  RN  18480-53-0) 
0 % 
— 
31.12.2021 
0.7312 
ex 2934 20 80 
15 
Benthiavalicarb-isopropyl  (ISO)  (CAS  RN  177406-68-7) 
0 % 
— 
31.12.2022 
0.5252 
ex 2934 20 80 
30 
2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]- 
0 % 
— 
31.12.2021 
acetic  acid,  methyl  ester  (CAS  RN  246035-38-1) 
▼M13 
0.4346 
ex 2934 20 80 
25 
1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity 
0 % 
— 
31.12.2022 
by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more 
of  1,2-benzisothiazol-3(2H)-one 
C3 
0.4955 
ex 2934 20 80 
60 
Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate  (CAS  RN 
0 % 
— 
31.12.2020 
143183-03-3) 
0.4910 
ex 2934 20 80 
70 
N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine  (CAS  RN  3741-80-8) 
0 % 
— 
31.12.2020 
0.5537 
ex 2934 30 90 
10 
2-Methylthiophenothiazine  (CAS  RN  7643-08-5) 
0 % 
— 
31.12.2022 
02013R1387 
0.6492 
ex 2934 99 90 
10 
Fluralaner  (INN)  (CAS  RN  864731-61-3) 
0 % 
— 
31.12.2024 
0.5924 
ex 2934 99 90 
12 
Dimethomorph  (ISO)  (CAS  RN  110488-70-5) 
0 % 
— 
31.12.2023 
0.3577 
ex 2934 99 90 
15 
Carboxin  (ISO)  (CAS  RN  5234-68-4) 
0 % 
— 
31.12.2023 
— 
EN 
0.6476 
ex 2934 99 90 
16 
Difenoconazole  (ISO)  (CAS  RN  119446-68-3) 
0 % 
— 
31.12.2024 
— 
▼M13 
01.07.2020 
0.7843 
ex 2934 99 90 
17 
(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic  acid  (CAS  RN  1273567-44-4) 
0 % 
— 
31.12.2024 
with  a  purity  by  weight  of  95 %  or  more 
— 
C3 
013.001 
0.4715 
ex 2934 99 90 
20 
Thiophene  (CAS  RN  110-02-1) 
0 % 
— 
31.12.2024 
0.5263 
ex 2934 99 90 
23 
Bromuconazole  (ISO) with  a  purity  by  weight  of  96 %  or  more  (CAS  RN  116255-48-2) 
0 % 
— 
31.12.2021 
— 
82
0.6241 
ex 2934 99 90 
24 
Flufenacet  (ISO)  (CAS  RN  142459-58-3)  with  a  purity  by  weight  of  95 %  or  more 
0 % 
— 
31.12.2024 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4942 
ex 2934 99 90 
25 
2,4-Diethyl-9H-thioxanthen-9-one  (CAS  RN  82799-44-8) 
0 % 
— 
31.12.2020 
0.6252 
ex 2934 99 90 
26 
4-Methylmorpholine  4-oxide  in  an  aqueous  solution  (CAS  RN  7529-22-8) 
0 % 
— 
31.12.2024 
0.6362 
ex 2934 99 90 
27 
2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol  (CAS  RN  63676-22-2) 
0 % 
— 
31.12.2024 
0.5242 
ex 2934 99 90 
28 
11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine  dihydrochloride  (CAS  RN  111974-74-4) 
0 % 
— 
31.12.2021 
▼M13 
0.7837 
ex 2934 99 90 
29 
(2R,5S)-tert-butyl 
4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1- 
0 % 
— 
31.12.2024 
carboxylate  (CAS  RN  1403902-77-1)  with  a  purity  by  weight  of  98 %  or  more 
C3 
0.4700 
ex 2934 99 90 
30 
Dibenzo[b,f][1,4]thiazepin-11(10H)-one  (CAS  RN  3159-07-7) 
0 % 
— 
31.12.2024 
0.6744 
ex 2934 99 90 
31 
Uridine  5'-diphospho-N-acetylgalactosamine  disodium  salt  (CAS  RN  91183-98-1) 
0 % 
— 
31.12.2020 
0.6743 
ex 2934 99 90 
32 
Uridine  5'-diphosphoglucuronic  acid  trisodium  salt  (CAS  RN  63700-19-6) 
0 % 
— 
31.12.2020 
▼M13 
02013R1387 
0.7840 
ex 2934 99 90 
33 
(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotet­
0 % 
— 
31.12.2024 
rahydrofuran-3-yl  benzoate  (CAS  RN  134790-39-9)  with  a  purity  by  weight  of  98 %  or 
more 
— 
C3 
EN 
0.6733 
ex 2934 99 90 
34 
7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4- 
0 % 
— 
31.12.2020 
— 
b]pyridin-5(7H)-one  (CAS  RN  69898-40-4) 
01.07.2020 
0.6776 
ex 2934 99 90 
36 
Oxadiazon  (ISO)  (CAS  RN  19666-30-9)  with  a  purity  by  weight  of  95 %  or  more 
0 % 
— 
31.12.2020 
0.5813 
ex 2934 99 90 
37 
4-Propan-2-ylmorpholine  (CAS  RN  1004-14-4) 
0 % 
— 
31.12.2022 
— 
0.6824 
ex 2934 99 90 
39 
4-(Oxiran-2-ylmethoxy)-9H-carbazole  (CAS  RN  51997-51-4) 
0 % 
— 
31.12.2020 
013.001 
0.6823 
ex 2934 99 90 
41 
11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine  (CAS  RN  352232-17-8) 
0 % 
— 
31.12.2020 
0.6922 
ex 2934 99 90 
42 
1-(Morpholin-4-yl)prop-2-en-1-one  (CAS  RN  5117-12-4) 
0 % 
— 
31.12.2024 
— 
83
0.6893 
ex 2934 99 90 
44 
Propiconazole  (ISO)  (CAS  RN  60207-90-1)  with  a  purity  by  weight  of  92 %  or  more 
0 % 
— 
31.12.2020 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7144 
ex 2934 99 90 
46 
4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile  (CAS  RN  675126-26-8) 
0 % 
— 
31.12.2021 
0.7123 
ex 2934 99 90 
47 
Thidiazuron  (ISO)  (CAS  RN  51707-55-2)  with  a  content  by  weight  of  98 %  or  more 
0 % 
— 
31.12.2021 
0.5453 
ex 2934 99 90 
48 
Propan-2-ol  –  2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine 
0 % 
— 
31.12.2021 
(1:2)  dihydrate  (CAS  RN  864743-41-9) 
0.7188 
ex 2934 99 90 
49 
Cytidine  5'-(disodium  phosphate)  (CAS  RN  6757-06-8) 
0 % 
— 
31.12.2021 
0.4943 
ex 2934 99 90 
50 
10-[1,1'-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium  hexafluorophosphate 
0 % 
— 
31.12.2020 
(CAS  RN  591773-92-1) 
0.7259 
ex 2934 99 90 
52 
Epoxiconazole  (ISO)  (CAS  RN  133855-98-8) 
0 % 
— 
31.12.2022 
0.7146 
ex 2934 99 90 
53 
4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile  (CAS  RN  675126-28-0) 
0 % 
— 
31.12.2021 
02013R1387 
0.7311 
ex 2934 99 90 
54 
2-benzyl-2-dimethylamino-4'-morpholinobutyrophenone  (CAS  RN  119313-12-1) 
0 % 
— 
31.12.2022 
0.7297 
ex 2934 99 90 
56 
1-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone  (CAS  RN  1173693-36-1) 
0 % 
— 
31.12.2022 
— 
EN 
0.7229 
ex 2934 99 90 
57 
(6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic 
0 % 
— 
31.12.2022 
acid  (CAS  RN  120709-09-3) 
— 
01.07.2020 
0.3575 
ex 2934 99 90 
58 
Dimethenamide-P  (ISO)  (CAS  RN  163515-14-8) 
0 % 
— 
31.12.2023 
0.7387 
ex 2934 99 90 
59 
Dolutegravir  (INN)  (CAS  RN  1051375-16-6)  or  dolutegravir  sodium  (CAS  RN 
0 % 
— 
31.12.2022 
— 
1051375-19-9) 
013.001 
0.2718 
ex 2934 99 90 
60 
DL-Homocysteine  thiolactone  hydrochloride  (CAS  RN  6038-19-3) 
0 % 
— 
31.12.2023 
— 
0.7459 
ex 2934 99 90 
61 
5-(1,2-dithiolan-3-yl)valeric  acid  (CAS  RN  1077-28-7) 
0 % 
— 
31.12.2023 
84
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7536 
ex 2934 99 90 
62 
(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol  17-acetate 
0 % 
— 
31.12.2023 
(CAS  RN  119302-24-8) 
0.7537 
ex 2934 99 90 
63 
(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol  (CAS  RN 
0 % 
— 
31.12.2023 
119302-20-4) 
0.7449 
ex 2934 99 90 
64 
2-Bromo-5-benzoylthiophene  (CAS  RN  31161-46-3) 
0 % 
— 
31.12.2023 
0.4512 
ex 2934 99 90 
66 
Tetrahydrothiophene-1,1-dioxide  (CAS  RN  126-33-0) 
0 % 
— 
31.12.2023 
0.7809 
ex 2934 99 90 
68 
Afatinib  dimaleate  (INNM)  (CAS  RN  850140-73-7) 
0 % 
— 
31.12.2024 
▼M13 
0.7842 
ex 2934 99 90 
69 
3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one  (CAS 
0 % 
— 
31.12.2024 
RN  1220696-32-1)  with  a  purity  by  weight  of  95 %  or  more 
C3 
0.7731 
ex 2934 99 90 
73 
Tetrahydrouridine  (CAS  RN  18771-50-1) 
0 % 
— 
31.12.2024 
02013R1387 
0.4249 
ex 2934 99 90 
74 
2-Isopropylthioxanthone  (CAS  RN  5495-84-1) 
0 % 
— 
31.12.2022 
0.4052 
ex 2934 99 90 
75 
(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(pheny­
0 % 
— 
31.12.2021 
lamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate 
(CAS 
RN 
— 
125971-95-1) 
EN 
— 
0.4058 
ex 2934 99 90 
76 
2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole)  (CAS  RN  7128-64-5) 
0 % 
— 
31.12.2021 
ex 3204 20 00 
10 
01.07.2020 
0.7579 
ex 2934 99 90 
78 
[(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] 
(mor­
0 % 
— 
31.12.2023 
pholino)methanone  (CAS  RN  1103738-19-7) 
— 
0.4388 
ex 2934 99 90 
79 
Thiophen-2-ethanol  (CAS  RN  5402-55-1) 
0 % 
— 
31.12.2023 
013.001 
0.7657 
ex 2934 99 90 
80 
2-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one 
0 % 
— 
31.12.2023 
(CAS  RN  119344-86-4) 
— 
0.4643 
ex 2934 99 90 
83 
Flumioxazin  (ISO)  (CAS  RN  103361-09-7)  of  a  purity  by  weight  of  96 %  or  more 
0 % 
— 
31.12.2024 
85
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4645 
ex 2934 99 90 
84 
Etoxazole  (ISO)  (CAS  RN  153233-91-1)  of  a  purity  by  weight  of  94,8 %  or  more 
0 % 
— 
31.12.2024 
0.5133 
ex 2934 99 90 
86 
Dithianon  (ISO)  (CAS  RN  3347-22-6) 
0 % 
— 
31.12.2020 
0.5136 
ex 2934 99 90 
87 
2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one)  (CAS  RN  18600-59-4) 
0 % 
— 
31.12.2020 
0.7738 
ex 2934 99 90 
88 
(7S,9aS)-7-((benzyloxy)methyl)octahydropyrazino[2,1-c][1,4]oxazine  dioxalate  (CAS  RN 
0 % 
— 
31.12.2024 
1268364-46-0) 
0.7815 
ex 2934 99 90 
89 
Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5- 
0 % 
— 
31.12.2024 
c]pyrrol-1-one  (CAS  RN  129385-59-7) 
0.6486 
ex 2935 90 90 
10 
Florasulam  (ISO)  (CAS  RN  145701-23-1) 
0 % 
— 
31.12.2024 
0.3566 
ex 2935 90 90 
15 
Flupyrsulfuron-methyl-sodium  (ISO)  (CAS  RN  144740-54-5) 
0 % 
— 
31.12.2023 
02013R1387 
0.3565 
ex 2935 90 90 
20 
Toluenesulphonamides 
0 % 
— 
31.12.2023 
0.5239 
ex 2935 90 90 
23 
N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide  (CAS  RN  64488-52-4) 
0 % 
— 
31.12.2021 
— 
0.3563 
ex 2935 90 90 
25 
Triflusulfuron-methyl  (ISO)  (CAS  RN  126535-15-7) 
0 % 
— 
31.12.2023 
EN 
— 
0.5261 
ex 2935 90 90 
27 
Methyl 
(3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfo­
0 % 
— 
31.12.2021 
nyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate  (CAS  RN  147118-40-9) 
01.07.2020 
0.5894 
ex 2935 90 90 
28 
N-Fluorobenzenesulphonimide  (CAS  RN  133745-75-2) 
0 % 
— 
31.12.2023 
— 
0.7183 
ex 2935 90 90 
30 
6-Aminopyridine-2-sulfonamide  (CAS  RN  75903-58-1) 
0 % 
— 
31.12.2021 
013.001 
0.7677 
ex 2935 90 90 
33 
4-Chloro-3-pyridinesulphonamide  (CAS  RN  33263-43-3) 
0 % 
— 
31.12.2023 
— 
0.3564 
ex 2935 90 90 
35 
Chlorsulfuron  (ISO)  (CAS  RN  64902-72-3) 
0 % 
— 
31.12.2023 
86
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7572 
ex 2935 90 90 
37 
1,3-Dimethyl-1H-pyrazole-4-sulfonamide  (CAS  RN  88398-53-2) 
0 % 
— 
31.12.2023 
0.7438 
ex 2935 90 90 
40 
Venetoclax  (INN)  (CAS  1257044-40-8) 
0 % 
— 
31.12.2022 
0.5036 
ex 2935 90 90 
42 
Penoxsulam  (ISO)  (CAS  RN  219714-96-2) 
0 % 
— 
31.12.2020 
0.6370 
ex 2935 90 90 
43 
Oryzalin  (ISO)  (CAS  RN  19044-88-3) 
0 % 
— 
31.12.2024 
0.3562 
ex 2935 90 90 
45 
Rimsulfuron  (ISO)  (CAS  RN  122931-48-0) 
0 % 
— 
31.12.2023 
0.6242 
ex 2935 90 90 
47 
Halosulfuron-methyl  (ISO)  (CAS  RN  100784-20-1)  with  a  purity  by  weight  of  98 %  or 
0 % 
— 
31.12.2024 
more 
0.5451 
ex 2935 90 90 
48 
(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyri­
0 % 
— 
31.12.2021 
midin-5-yl]-3,5-dihydroxyhept-6-enoic  acid  –  1-[(R)-(4-chlorophenyl)(phenyl)methyl]pip­
02013R1387 
erazine  (1:1)  (CAS  RN  1235588-99-4) 
0.2843 
ex 2935 90 90 
50 
4,4'-Oxydi(benzenesulphonohydrazide)  (CAS  RN  80-51-3) 
0 % 
— 
31.12.2023 
— 
0.6834 
ex 2935 90 90 
52 
(1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl)  cyclopropanecar­
0 % 
— 
31.12.2020 
EN 
boxamide  hydrochloride  (CUS  0143290-2) (5 ) 
— 
01.07.2020 
0.4636 
ex 2935 90 90 
53 
2,4-Dichloro-5-sulphamoylbenzoic  acid  (CAS  RN  2736-23-4) 
0 % 
— 
31.12.2024 
0.6777 
ex 2935 90 90 
54 
Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % 
0 % 
— 
31.12.2020 
or  more 
— 
013.001 
0.3560 
ex 2935 90 90 
55 
Thifensulfuron-methyl  (ISO)  (CAS  RN  79277-27-3) 
0 % 
— 
31.12.2023 
— 
0.6802 
ex 2935 90 90 
56 
N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) 
0 % 
— 
31.12.2020 
87
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6903 
ex 2935 90 90 
57 
N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide  (CAS  RN  215917-77-4) 
0 % 
— 
31.12.2020 
0.6811 
ex 2935 90 90 
58 
1-Methylcyclopropane-1-sulphonamide  (CAS  RN  669008-26-8) 
0 % 
— 
31.12.2020 
0.6664 
ex 2935 90 90 
59 
Flazasulfuron  (ISO)  (CAS  RN  104040-78-0)  with  a  purity  of  94 %  by  weight  or  more 
0 % 
— 
31.12.2020 
0.7676 
ex 2935 90 90 
60 
4-[(3-Methylphenyl)amino]pyridine-3-sulfonamide  (CAS  RN  72811-73-5) 
0 % 
— 
31.12.2023 
0.4586 
ex 2935 90 90 
63 
Nicosulphuron  (ISO)  (CAS  RN  111991-09-4)  of  a  purity  by  weight  of  91 %  or  more 
0 % 
— 
31.12.2024 
0.3561 
ex 2935 90 90 
65 
Tribenuron-methyl  (ISO)  (CAS  RN  101200-48-0) 
0 % 
— 
31.12.2023 
0.6959 
ex 2935 90 90 
67 
N-(2-phenoxyphenyl)methanesulphonamide  (CAS  RN  51765-51-6) 
0 % 
— 
31.12.2021 
▼M13 
0.7854 
ex 2935 90 90 
70 
(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide- 
0 % 
— 
31.12.2024 
1,1-dioxide  (CAS  RN  154127-42-1)  with  a  purity  by  weight  of  97 %  or  more 
02013R1387 
C3 
0.5539 
ex 2935 90 90 
73 
(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide  (CAS  RN  902146-43-4) 
0 % 
— 
31.12.2022 
0.3559 
ex 2935 90 90 
75 
Metsulfuron-methyl  (ISO)  (CAS  RN  74223-64-6) 
0 % 
— 
31.12.2023 
— 
EN 
0.2844 
ex 2935 90 90 
85 
N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide  hydrochloride 
0 % 
— 
31.12.2024 
— 
0.3704 
ex 2935 90 90 
88 
N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide 
sesquisulphate 
0 % 
— 
31.12.2023 
01.07.2020 
monohydrate  (CAS  RN  25646-71-3) 
0.4048 
ex 2935 90 90 
89 
3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1- 
0 % 
— 
31.12.2021 
sulphonamide  (CAS  RN  348635-87-0) 
— 
013.001 
0.4944 
ex 2938 90 30 
10 
Ammonium  glycyrrhizate  (CAS  RN  53956-04-0) 
0 % 
— 
31.12.2020 
0.3554 
ex 2938 90 90 
10 
Hesperidin  (CAS  RN  520-26-3) 
0 % 
— 
31.12.2023 
— 
0.5927 
ex 2938 90 90 
20 
Ethylvanillin  beta-D-glucopyranoside  (CAS  RN  122397-96-0) 
0 % 
— 
31.12.2023 
88
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7329 
ex 2938 90 90 
30 
Rebaudioside  A  (CAS  RN  58543-16-1) 
0 % 
— 
31.12.2022 
0.7327 
ex 2938 90 90 
40 
Purified  steviol  glycoside  with  a  rebaudioside  M  (CAS  RN  1220616-44-3)  content  of 
0 % 
— 
31.12.2022 
80 %  or  more  but  not  more  than  90 %  by  weight  for  use  in  the  manufacture  of  non- 
alcoholic  beverages (2 ) 
0.7047 
ex 2940 00 00 
30 
D(+)-  Trehalose  dihydrate  (CAS  RN  6138-23-4) 
0 % 
— 
31.12.2021 
0.7757 
ex 2940 00 00 
50 
2,3,4,6-Tetrakis-O-(phenylmethyl)-D-galactopyranose  (CAS  RN  6386-24-9) 
0 % 
— 
31.12.2024 
0.5233 
ex 2941 20 30 
10 
Dihydrostreptomycin  sulphate  (CAS  RN  5490-27-7) 
0 % 
— 
31.12.2021 
0.6984 
ex 2942 00 00 
10 
Sodium  triacetoxyborohydride  (CAS  RN  56553-60-7) 
0 % 
— 
31.12.2021 
0.3555 
3201 20 00 
Wattle  extract 
0 % 
— 
31.12.2023 
02013R1387 
0.3553 
ex 3201 90 90 
20 
Tanning  extracts  derived  from  gambier  and  myrobalan  fruits 
0 % 
— 
31.12.2023 
0.6600 
ex 3201 90 90 
40 
Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS 
0 % 
— 
31.12.2020 
ex 3202 90 00 
10 
RN  85029-52-3) 
— 
EN 
0.6183 
ex 3204 11 00 
15 
Colourant  C.I.  Disperse  Blue  360  (CAS  RN  70693-64-0)  and  preparations based  thereon 
0 % 
— 
31.12.2023 
— 
with  a  colourant  C.I.  Disperse  Blue  360  content  of  99 %  or  more  by  weight 
01.07.2020 
0.5091 
ex 3204 11 00 
20 
Colourant  C.I.  Disperse  Yellow  241  (CAS  RN  83249-52-9)  and  preparations  based 
0 % 
— 
31.12.2020 
thereon  with  a  colourant  C.I.  Disperse  Yellow  241  content  of  97 %  or  more  by  weight 
— 
0.6277 
ex 3204 11 00 
25 
N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine 
(CAS 
RN 
0 % 
— 
31.12.2024 
013.001 
63741-10-6) 
0.7307 
ex 3204 11 00 
35 
Colourant  C.I  Disperse  Yellow  232  (CAS  RN  35773-43-4)  and  preparations  based 
0 % 
— 
31.12.2022 
— 
thereon  with  a  colourant  C.I  Disperse  Yellow  232  of  50 %  or  more  by  weight 
89
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5235 
ex 3204 11 00 
40 
Colourant  C.I.  Disperse  Red  60  (CAS  RN  17418-58-5)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Disperse  Red  60  content  of  50 %  or  more  by  weight 
▼M13 
0.5134 
ex 3204 11 00 
45 
Preparation  of  dispersion  dyes,  containing: 
0 % 
— 
31.12.2020 
—  C.I.  Disperse  Orange  61  (CAS  RN  12270-45-0)  or  Disperse  Orange  288  (CAS  RN 
96662-24-7), 
—  C.I.  Disperse  Blue  291:1  (CAS  RN  872142-01-3), 
—  C.I.  Disperse  Violet  93:1  (CAS  RN  122463-28-9), 
whether  or  not  containing  C.I.  Disperse  Red  54  (CAS  RN  6657-37-0) 
C3 
0.5264 
ex 3204 11 00 
50 
Colourant  C.I. Disperse Blue 72  (CAS RN  81-48-1)  and  preparations based  thereon with 
0 % 
— 
31.12.2021 
a  colourant  C.I.  Disperse  Blue  72  content  of  95 %  or  more  by  weight 
02013R1387 
0.5236 
ex 3204 11 00 
60 
Colourant  C.I.  Disperse  Blue  359  (CAS  RN  62570-50-7)  and  preparations based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Disperse  Blue  359  content  of  50 %  or  more  by  weight 
0.5440 
ex 3204 12 00 
10 
Colourant  C.I.  Acid  Blue  9  (CAS  RN  2650-18-2)  and  preparations  based  thereon  with  a 
0 % 
— 
31.12.2021 
colourant  C.I.  Acid  Blue  9  content  of  50 %  or  more  by  weight 
— 
EN 
0.6972 
ex 3204 12 00 
15 
Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with 
0 % 
— 
31.12.2021 
— 
a  colourant  C.I.  Acid  Brown  75  content  of  75 %  or  more  by  weight 
01.07.2020 
0.6975 
ex 3204 12 00 
17 
Colourant  C.I.  Acid  Brown  355  (CAS  RN  84989-26-4  or  60181-77-3)  and  preparations 
0 % 
— 
31.12.2021 
based  thereon with a colourant C.I.  Acid Brown  355  content of 75 % or more by  weight 
— 
0.7021 
ex 3204 12 00 
25 
Colourant  C.I.  Acid  Black  210  (CAS  RN  85223-29-6  or  99576-15-5)  and  preparations 
0 % 
— 
31.12.2021 
013.001 
based  thereon  with  a  colourant  C.I.  Acid  Black  210  content  of  50 %  or  more  by  weight 
0.6976 
ex 3204 12 00 
27 
Colourant  C.I.  Acid  Brown  425  (CAS  RN  75234-41-2  or  119509-49-8)  and  preparations 
0 % 
— 
31.12.2021 
— 
based  thereon with a colourant C.I.  Acid Brown  425  content of 75 % or more by  weight 
90
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6963 
ex 3204 12 00 
35 
Colourant  C.I.  Acid  Black  234  (CAS  RN  157577-99-6)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Acid  Black  234  content  of  75 %  or  more  by  weight 
0.6964 
ex 3204 12 00 
37 
Colourant  C.I.  Acid  Black  210  sodium  salt  (CAS  RN  201792-73-6)  and  preparations 
0 % 
— 
31.12.2021 
based  thereon  with  a  colourant  C.I.  Acid  Black  210  sodium  salt  content  of  50 %  or 
more  by  weight 
0.5925 
ex 3204 12 00 
40 
Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219- 
0 % 
— 
31.12.2023 
26-0) 
0.6965 
ex 3204 12 00 
45 
Colourant C.I. Acid Blue 161/193  (CAS RN 12392-64-2)  and preparations based thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Acid  Blue  161/193  content  of  75 %  or  more  by  weight 
0.6971 
ex 3204 12 00 
47 
Colourant  C.I.  Acid  Brown  58  (CAS  RN  70210-34-3  or  12269-87-3)  and  preparations 
0 % 
— 
31.12.2021 
02013R1387 
based  thereon  with  a  colourant  C.I.  Acid  Brown  58  content  of  75 %  or  more  by  weight 
0.6973 
ex 3204 12 00 
55 
Colourant  C.I.  Acid  Brown  165  (CAS  RN  61724-14-9)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
— 
with  a  colourant  C.I.  Acid  Brown  165  content  of  75 %  or  more  by  weight 
EN 
— 
0.6974 
ex 3204 12 00 
57 
Colourant  C.I.  Acid  Brown  282  (CAS  RN  70236-60-1  or  12219-65-7)  and  preparations 
0 % 
— 
31.12.2021 
01.07.2020 
based  thereon with a colourant C.I.  Acid Brown  282  content of 75 % or more by  weight 
0.6535 
ex 3204 12 00 
60 
Colourant  C.I. Acid Red  52  (CAS  RN  3520-42-1)  and  preparations based  thereon with a 
0 % 
— 
31.12.2024 
— 
colourant  C.I.  Acid  Red  52  content  of  97 %  or  more  by  weight 
013.001 
0.6977 
ex 3204 12 00 
65 
Colourant  C.I.  Acid  Brown  432  (CAS  RN  119509-50-1)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
— 
with  a  colourant  C.I.  Acid  Brown  432  content  of  75 %  or  more  by  weight 
91
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6652 
ex 3204 12 00 
70 
Colourant C.I. Acid blue 25 (CAS RN  6408-78-2)  and preparations based thereon with a 
0 % 
— 
31.12.2020 
colourant  C.I.  Acid  blue  25  content  of  80 %  or  more  by  weight 
0.4065 
ex 3204 13 00 
10 
Colourant  C.I.  Basic  Red  1  (CAS  RN  989-38-8)  and  preparations  based  thereon  with  a 
0 % 
— 
31.12.2021 
colourant  C.I.  Basic  Red  1  content  of  50 %  or  more  by  weight 
0.7394 
ex 3204 13 00 
15 
Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with 
0 % 
— 
31.12.2022 
a  colourant  C.I.  Basic  Blue  41  content  of  50 %  or  more  by  weight 
0.7395 
ex 3204 13 00 
25 
Colourant  C.I.  Basic Red  46  (CAS RN  12221-69-1)  and  preparations  based  thereon with 
0 % 
— 
31.12.2022 
a  colourant  C.I.  Basic  Red  46  content  of  20 %  or  more  by  weight 
0.5804 
ex 3204 13 00 
30 
Colourant C.I. Basic Blue 7 (CAS RN  2390-60-5)  and  preparations based  thereon with a 
0 % 
— 
31.12.2023 
colourant  C.I.  Basic  Blue  7  content  of  50 %  or  more  by  weight 
02013R1387 
0.7396 
ex 3204 13 00 
35 
Colourant  C.I.  Basic  Yellow  28  (CAS  RN  54060-92-3)  and  preparations  based  thereon 
0 % 
— 
31.12.2022 
with  a  colourant  C.I.  Basic  Yellow  28  content  of  50 %  or  more  by  weight 
0.5805 
ex 3204 13 00 
40 
Colourant  C.I.  Basic  Violet  1  (CAS  RN  603-47-4  or  CAS  RN  8004-87-3)  and  prep­
0 % 
— 
31.12.2022 
— 
arations  based  thereon  with  a  colourant  C.I.  Basic  Violet  1  content  of  90 %  or  more  by 
weight 
EN 
— 
01.07.2020 
0.7398 
ex 3204 13 00 
45 
Mixture  of  colourant  C.I.  Basic  Blue  3  (CAS  RN  33203-82-6)  and  colourant  C.I.  Basic 
0 % 
— 
31.12.2022 
Blue  159  (CAS  RN  105953-73-9)  with  a  colourant  Basic  Blue  content  of  40 %  or  more 
by  weight 
— 
0.6474 
ex 3204 13 00 
50 
Colourant C.I Basic Violet 11  (CAS RN  2390-63-8)  and preparations based thereon with 
0 % 
— 
31.12.2024 
013.001 
a  colourant  C.I  Basic  Violet  11  content  of  90 %  or  more  by  weight 
0.7775 
ex 3204 13 00 
55 
Colourant C.I. Basic Violet 16 (CAS RN 6359-45-1) and preparations based thereon with 
0 % 
— 
31.12.2024 
— 
a  colourant  C.I.  Basic  Violet  16  content  of  60 %  or  more  by  weight 
92
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6475 
ex 3204 13 00 
60 
Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a 
0 % 
— 
31.12.2024 
colourant  C.I  Basic  Red  1:1  content  of  90 %  or  more  by  weight 
0.7776 
ex 3204 13 00 
65 
Colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and preparations based thereon with a 
0 % 
— 
31.12.2024 
colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) content of 50 % or more but not more 
than  80 %  by  weight 
0.7777 
ex 3204 13 00 
70 
Mixture of the colourants C.I. Basic Yellow 28 (CAS RN 54060-92-3), C.I. Basic Red 46 
0 % 
— 
31.12.2024 
(CAS RN 12221-69-1) and C.I. Basic Blue 159 (CAS RN 105953-73-9) and preparations 
based  thereon  with  a  content  of  colourants  C.I.  Basic  Yellow  28,  C.I.  Basic  Red  46  and 
C.I.  Basic  Blue  159  taken  together  of  60 %  or  more  by  weight 
0.7778 
ex 3204 13 00 
75 
Colourant  C.I.  Basic  Red  18:1  (CAS  RN  12271-12-4)  and  preparations  based  thereon 
0 % 
— 
31.12.2024 
with  a  content  of  40 %  or  more  by  weight 
02013R1387 
0.7779 
ex 3204 13 00 
80 
Colourant  C.I.  Basic  Yellow (CAS  RN  83949-75-1)  and  preparations based  thereon  with 
0 % 
— 
31.12.2024 
a  content  of  40 %  or  more  by  weight 
0.6569 
ex 3204 14 00 
10 
Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with 
0 % 
— 
31.12.2024 
— 
a  colourant  C.I.  Direct  Black  80  content  of  90 %  or  more  by  weight 
EN 
— 
0.6570 
ex 3204 14 00 
20 
Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with 
0 % 
— 
31.12.2024 
01.07.2020 
a  colourant  C.I.  Direct  Blue  80  content  of  90 %  or  more  by  weight 
0.6571 
ex 3204 14 00 
30 
C.I. Colourant Direct Red 23  (CAS RN  3441-14-3  ) and  preparations based thereon with 
0 % 
— 
31.12.2024 
— 
a  colourant  C.I.  Direct  Red  23  content  of  90 %  or  more  by  weight 
013.001 
0.6978 
ex 3204 14 00 
40 
Colourant C.I Direct Black 168, in powder form for leather dyeing (CAS RN 85631-88-5) 
0 % 
— 
31.12.2021 
and  preparations based  thereon with a colourant C.I.  Direct Black 168  content by  weight 
— 
of  75 %  or  more,  in  powder  form  for  leather  dyeing (2 ) 
93
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7885 
ex 3204 15 00 
20 
Colourant  C.I.  Vat  Blue  1  (CAS  RN  482-89-3)  and  preparations  based  thereon  with  a 
0 % 
— 
31.12.2024 
colourant  C.I.  Vat  Blue  1  content  of  94 %  or  more  by  weight 
C3 
0.3997 
ex 3204 15 00 
60 
Colourant  C.I.  Vat  Blue  4  (CAS  RN  81-77-6)  and  preparations  based  thereon  with  a 
0 % 
— 
31.12.2023 
colourant  C.I.  Vat  Blue  4  content  of  50 %  or  more  by  weight 
0.6129 
ex 3204 15 00 
70 
Colourant  C.I.  Vat  Red  1  (CAS  RN  2379-74-0) 
0 % 
— 
31.12.2023 
0.6325 
ex 3204 16 00 
30 
Preparations  based  on  Colourant  Reactive Black 5  (CAS  RN  17095-24-8)  with a  content 
0 % 
— 
31.12.2024 
thereof of 60 % or more but not more than 75 % by weight, and including one or more of 
the  following: 
—  Colourant  Reactive  Yellow  201  (CAS  RN  27624-67-5), 
—  1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phe­
nyl]azo]-,  disodium  salt  (CAS  RN  250688-43-8),  or 
02013R1387 
—  3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sul­
phooxy)ethyl]sulfonyl]phenyl]azobenzoic  acid  sodium  salt  (CAS  RN  906532-68-1) 
0.7367 
ex 3204 16 00 
40 
Aqueous  solution  of  Colourant  C.I.  Reactive  Red  141  (CAS  RN  61931-52-0) 
0 % 
— 
31.12.2022 
—  with  a  colourant  C.I.  Reactive  Red  141  content  of  13 %  or  more  by  weight,  and 
— 
—  containing  a  preservative 
EN 
— 
0.2517 
ex 3204 17 00 
10 
Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon 
0 % 
— 
31.12.2023 
with  a  colourant  C.I.  Pigment  Yellow  81  content  of  50 %  or  more  by  weight 
01.07.2020 
0.5433 
ex 3204 17 00 
15 
Colourant  C.I.  Pigment  Green  7  (CAS  RN  1328-53-6)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Pigment  Green  7  content  of  40 %  or  more  by  weight 
— 
0.6918 
ex 3204 17 00 
16 
Colourant  C.I.  Pigment  Red  49:2  (CAS  RN  1103-39-5)  and  preparations  based  thereon 
0 % 
— 
31.12.2020 
013.001 
with  a  colourant  C.I.  Pigment  Red  49:2  content  of  60 %  or  more  by  weight 
— 
0.7092 
ex 3204 17 00 
18 
Colourant  C.I.  Pigment  Orange  16  (CAS  RN  6505-28-8)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Pigment  Orange  16  content  of  90 %  or  more  by  weight 
94
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6130 
ex 3204 17 00 
19 
Colourant  C.I.  Pigment  Red  48:2  (CAS  RN  7023-61-2)  and  preparations  based  thereon 
0 % 
— 
31.12.2023 
with  a  colourant  C.I.  Pigment  Red  48:2  content  of  85 %  or  more  by  weight 
0.5505 
ex 3204 17 00 
20 
Colourant  C.I.  Pigment  Blue  15:3  (CAS  RN  147-14-8)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Pigment  Blue  15:3  content  of  35 %  or  more  by  weight 
0.6279 
ex 3204 17 00 
21 
Colourant  C.I.  Pigment  Blue  15:4  (CAS  RN  147-14-8)  and  preparations  based  thereon 
0 % 
— 
31.12.2024 
with  a  colourant  C.I.  Pigment  Blue  15:4  content  of  35 %  or  more  by  weight 
0.5259 
ex 3204 17 00 
22 
Colourant  C.I.  Pigment  Red  169  (CAS  RN  12237-63-7)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Pigment  Red  169  content  of  50 %  or  more  by  weight 
0.6246 
ex 3204 17 00 
23 
Colourant  C.I.  Pigment  Brown  41  (CAS  RN  211502-16-8  or  CAS  RN  68516-75-6) 
0 % 
— 
31.12.2024 
0.6453 
ex 3204 17 00 
24 
Colourant  C.I.  Pigment  Red  57:1  (CAS  RN  5281-04-9)  and  preparations  based  thereon 
0 % 
— 
31.12.2023 
with  a  Colourant  C.I.  Pigment  Red  57:1  content  of  20 %  or  more  by  weight 
02013R1387 
0.5427 
ex 3204 17 00 
25 
Colourant  C.I.  Pigment  Yellow  14  (CAS  RN  5468-75-7)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Pigment  Yellow  14  content  of  25 %  or  more  by  weight 
— 
EN 
0.7261 
ex 3204 17 00 
26 
Colourant  C.I.  Pigment  Orange  13  (CAS  RN  3520-72-7)  and  preparations  based  thereon 
0 % 
— 
31.12.2022 
with  a  colourant  C.I.  Pigment  Orange  13  content  of  80 %  or  more  by  weight 
— 
01.07.2020 
0.7391 
ex 3204 17 00 
29 
Colourant  C.I.  Pigment  Red  268  (CAS  RN  16403-84-2)  and  preparations  based  thereon 
0 % 
— 
31.12.2022 
with  a  Colourant  C.I.  Pigment  Red  268  content  of  80 %  or  more  by  weight 
— 
0.7659 
ex 3204 17 00 
31 
Colourant  C.I.  Pigment  Red  63:1  (CAS  RN  6417-83-0)  and  preparations  based  thereon 
0 % 
— 
31.12.2023 
013.001 
with  a  colourant  C.I.  Pigment  Red  63:1  content  of  70 %  or  more  by  weight 
0.6603 
ex 3204 17 00 
33 
Colourant  C.I.  Pigment  Blue  15:1  (CAS  RN  147-14-8)  and  preparations  based  thereon 
0 % 
— 
31.12.2020 
— 
with  a  colourant  C.I.  Pigment  Blue  15:1  content  of  35 %  or  more  by  weight 
95
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5426 
ex 3204 17 00 
35 
Colourant  C.I.  Pigment  Red  202  (CAS  RN  3089-17-6)  and  preparations  based  thereon 
0 % 
— 
31.12.2021 
with  a  colourant  C.I.  Pigment  Red  202  content  of  70 %  or  more  by  weight 
0.7565 
ex 3204 17 00 
37 
Colourant  C.I.  Pigment  Red  81:2  (CAS  RN  75627-12-2)  and  preparations  based  thereon 
0 % 
— 
31.12.2023 
with  a  colourant  C.I.  Pigment  Red  81:2  content  of  30 %  or  more  by  weight 
0.4630 
ex 3204 17 00 
40 
Colourant  C.I.  Pigment  Yellow  120  (CAS  RN  29920-31-8)  and  preparations  based 
0 % 
— 
31.12.2024 
thereon  with  a  colourant  C.I.  Pigment  Yellow  120  content  of  50 %  or  more  by  weight 
0.6452 
ex 3204 17 00 
45 
Colourant  C.I.  Pigment  Yellow  174  (CAS  RN  78952-72-4),  highly  resinated  pigment 
0 % 
— 
31.12.2023 
(approx.  35 %  disproportionate  resin),  with  a  purity  of  98 %  by  weight  or  more,  in  the 
form  of  extruded  beads  with  a  moisture  content  of  not  more  than  1 %  by  weight 
0.5299 
ex 3204 17 00 
65 
Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with 
0 % 
— 
31.12.2021 
a  colourant  C.I.  Pigment  Red  53  content  of  50 %  or  more  by  weight 
02013R1387 
0.5832 
ex 3204 17 00 
75 
Colourant  C.I.  Pigment  Orange  5  (CAS  RN  3468-63-1)  and  preparations  based  thereon 
0 % 
— 
31.12.2022 
with  a  colourant  C.I.  Pigment  Orange  5  content  of  80 %  or  more  by  weight 
— 
0.5645 
ex 3204 17 00 
80 
Colourant  C.I.  Pigment  Red  207  (CAS  RN  71819-77-7)  and  preparations  based  thereon 
0 % 
— 
31.12.2022 
with  a  colourant  C.I.  Pigment  Red  207  content  of  50 %  or  more  by  weight 
EN 
— 
01.07.2020 
0.5700 
ex 3204 17 00 
85 
Colourant  C.I.  Pigment  Blue  61  (CAS  RN  1324-76-1)  and  preparations  based  thereon 
0 % 
— 
31.12.2022 
with  a  colourant  C.I.  Pigment  Blue  61  content  of  35 %  or  more  by  weight 
0.5680 
ex 3204 17 00 
88 
Colourant  C.I.  Pigment  Violet  3  (CAS  RN  1325-82-2  or  CAS  RN  101357-19-1)  and 
0 % 
— 
31.12.2022 
— 
preparations  based  thereon  with  a  colourant  C.I.  Pigment  Violet  3  content  of  90 %  or 
013.001 
more  by  weight 
0.6979 
ex 3204 19 00 
13 
Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with 
0 % 
— 
31.12.2021 
— 
a  colourant  C.I.  Sulphur  Black  1  content  of  75 %  or  more  by  weight 
96
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6406 
ex 3204 19 00 
14 
Red  colourant  preparation,  in  a  form  of  wet  paste,  containing  by  weight: 
0 % 
— 
31.12.2024 
—  35 %  or  more  but  not  more  than  40 %  of  1-[[4-(phenylazo)phenyl]azo]naphthalen-2- 
ol  methyl  derivatives  (CAS  RN  70879-65-1), 
—  not  more  than  3 %  of  1-(phenylazo)naphthalen-2-ol  (CAS  RN  842-07-9), 
—  not  more  than  3 %  of  1-[(2-methylphenyl)azo]naphthalen-2-ol  (CAS  RN  2646-17-5), 
—  55 %  or  more  but  not  more  than  65 %  of  water 
0.7262 
ex 3204 19 00 
16 
Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon 
0 % 
— 
31.12.2022 
with  a  colourant  C.I.  Solvent  Yellow  133  content  of  97 %  or  more  by  weight 
0.5103 
ex 3204 19 00 
71 
Colourant  C.I.  Solvent  Brown  53  (CAS  RN  64696-98-6)  and  preparations  based  thereon 
0 % 
— 
31.12.2020 
with  a  colourant  C.I.  Solvent  Brown  53  content  of  95 %  or  more  by  weight 
0.5100 
ex 3204 19 00 
73 
Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with 
0 % 
— 
31.12.2020 
a  colourant  C.I.  Solvent  Blue  104  content  of  97 %  or  more  by  weight 
0.5282 
ex 3204 19 00 
77 
Colourant  C.I.  Solvent  Yellow  98  (CAS  RN  27870-92-4  or  CAS  RN  12671-74-8)  and 
0 % 
— 
31.12.2021 
02013R1387 
preparations  based  thereon  with  a  colourant  C.I.  Solvent  Yellow  98  content  of  95 %  or 
more  by  weight 
0.5671 
ex 3204 19 00 
84 
Colourant  C.I.  Solvent  Blue  67  (CAS  RN  12226-78-7)  and  preparations  based  thereon 
0 % 
— 
31.12.2022 
with  a  colourant  C.I.  Solvent  Blue  67  content  of  98 %  or  more  by  weight 
— 
EN 
0.5395 
ex 3204 20 00 
30 
Colourant C.I. Fluorescent Brightener 351  (CAS RN 27344-41-8)  and  preparations based 
0 % 
— 
31.12.2021 
— 
thereon  with  a  colourant  C.I.  Fluorescent  Brightener  351  content  of  90 %  or  more  by 
01.07.2020 
weight 
0.6473 
ex 3204 90 00 
10 
Colourant  C.I  Solvent  Yellow  172  (also  known  as  C.I.  Solvent  Yellow  135)  (CAS  RN 
0 % 
— 
31.12.2024 
68427-35-0)  and  preparations  based  thereon  with  a  colourant  C.I  Solvent  Yellow  172 
— 
(also  known  as  C.I.  Solvent  Yellow  135)  content  of  90 %  or  more  by  weight 
013.001 
0.7326 
ex 3204 90 00 
20 
Preparations  of  colourant  C.I.  Solvent  Red  175  (CAS  RN  68411-78-6)  in  petroleum 
0 % 
— 
31.12.2022 
distillates,  hydrotreated  light  naphthenic  (CAS  RN  64742-53-6),  containing  by  weight 
— 
40 %  or  more  but  not  more  than  60 %  of  a  colourant  C.I.  Solvent  Red  175 
97
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3707 
ex 3205 00 00 
10 
Aluminium  lakes  prepared  from  dyes  for  use  in  the  manufacture  of  pigments  for  the 
0 % 
— 
31.12.2023 
pharmaceutical  industry (2 ) 
0.7658 
ex 3205 00 00 
20 
Colourant  C.I.  Solvent  Red  48  (CAS  RN  13473-26-2)  preparation,  in  a  form  of  dry 
0 % 
— 
31.12.2023 
powder,  containing  by  weight: 
—  16 %  or  more  but  not  more  than  25 %  of  Colourant  C.I.  Solvent  Red  48  (CAS  RN 
13473-26-2), 
—  65 % or more but not more than 75 % of aluminium hydroxide (CAS RN 21645-51-2) 
0.7699 
ex 3205 00 00 
30 
Colourant  C.I.  Pigment  Red  174  (CAS  RN  15876-58-1)  preparation,  in  a  form  of  dry 
0 % 
— 
31.12.2023 
powder,  containing  by  weight: 
—  16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 
15876-58-1), 
—  65 % or more but not more than 69 % of aluminium hydroxide (CAS RN 21645-51-2) 
0.3550 
ex 3206 11 00 
10 
Titanium  dioxide  coated  with  isopropoxytitanium  triisostearate,  containing  by  weight 
0 % 
— 
31.12.2023 
1,5 %  or  more  but  not  more  than  2,5 %  of  isopropoxytitanium  triisostearate 
02013R1387 
0.5378 
ex 3206 19 00 
10 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2021 
—  72 %  (±  2 %)  of  mica  (CAS  RN  12001-26-2),  and 
—  28 %  (±  2 %)  of  titanium  dioxide  (CAS  RN  13463-67-7) 
— 
EN 
0.3551 
ex 3206 42 00 
10 
Lithopone  (CAS  RN  1345-05-7) 
0 % 
— 
31.12.2023 
— 
01.07.2020 
0.6245 
ex 3206 49 70 
20 
Colourant  C.I.  Pigment  Blue  27  (CAS  RN  14038-43-8) 
0 % 
— 
31.12.2024 
— 
0.7305 
ex 3206 49 70 
30 
Colourant  C.I.  Pigment  Black  12  (CAS  RN  68187-02-0)  and  preparations  based  thereon 
0 % 
— 
31.12.2022 
with  a  C.I.  Pigment  Black  12  content  of  50 %  or  more  by  weight 
013.001 
0.7390 
ex 3206 49 70 
40 
Colourant  C.I.  Pigment  Blue  27  (CAS  RN  25869-00-5)  and  preparations  thereon  with  a 
0 % 
— 
31.12.2022 
— 
colourant  C.I.  Pigment  Blue  27  content  of  85 %  or  more  by  weight 
98
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3673 
3206 50 00 
Inorganic  products  of  a  kind  used  as  luminophores 
0 % 
— 
31.12.2023 
0.6233 
ex 3207 30 00 
20 
Printing  paste  containing: 
0 % 
— 
31.12.2024 
—  30 %  by  weight  or  more,  but  not  more  than  50 %  of  silver,  and 
—  8 %  by  weight  or  more,  but  not  more  than  17 %  of  palladium 
0.5830 
ex 3207 40 85 
40 
Glass  flakes  (CAS  RN  65997-17-3): 
0 % 
— 
31.12.2022 
—  of  a  thickness  of  0,3  μm  or  more  but  not  more  than  10  μm,  and 
—  coated  with  titanium  dioxide  (CAS  RN  13463-67-7)  or  iron  oxide  (CAS  RN  18282- 
10-5) 
0.6727 
ex 3208 10 10 
10 
Thermoplastic  polyester  copolymer  resin  with  a  solid  content  of  30 %  or  more  but  not 
0 % 
— 
31.12.2020 
more  than  50 %,  in  organic  solvents 
0.2511 
ex 3208 20 10 
10 
Copolymer  of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and  dimethylaminoethyl  metha­
0 % 
— 
31.12.2023 
02013R1387 
crylate,  in  the  form  of  a  solution  in  ethanol  containing  by  weight  34 %  or  more  but  not 
more  than  40 %  of  copolymer 
0.4511 
ex 3208 20 10 
20 
Immersion topcoat  solution  containing  by  weight  0,5 %  or more but  not  more than  15 % 
0 % 
— 
31.12.2023 
— 
of  acrylate-methacrylate-alkenesulphonate  copolymers  with  fluorinated  side  chains,  in  a 
EN 
solution  of  n-butanol  and/or  4-methyl-2-pentanol  and/or  diisoamylether 
— 
01.07.2020 
0.3967 
ex 3208 90 19 
15 
Chlorinated  polyolefins,  in  a  solution 
0 % 
— 
31.12.2023 
0.5564 
ex 3208 90 19 
25 
Tetrafluoroethylene copolymer  in  butylacetate solution  with a  content  of solvent  of  50 % 
0 % 
— 
31.12.2022 
— 
ex 3904 69 80 
89 
(±  2 %)  by  weight 
013.001 
0.2504 
ex 3208 90 19 
40 
Polymer  of  methylsiloxane,  in  the  form  of  a  solution  in  a  mixture  of  acetone,  butanol, 
0 % 
— 
31.12.2023 
ethanol  and  isopropanol,  containing  by  weight  5 %  or  more  but  not  more  than  11 %  of 
— 
polymer  of  methylsiloxane 
99
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6154 
ex 3208 90 19 
45 
Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically 
0 % 
— 
31.12.2023 
ex 3824 99 92 
63 
modified  by  reaction  with  an  alkyne  halide,  dissolved  in  propylene  glycol  methyl  ether 
acetate 
0.6989 
ex 3208 90 19 
47 
Solution  containing  by  weight: 
0 % 
— 
31.12.2021 
—  0,1 % or more but not more than 20 % of alkoxygroups  containing siloxane polymer 
with  alkyl  or  aryl  substituents, 
—  75 %  or  more  of  an  organic  solvent  containing  one  or  more  of  propyleneglycolethy­
lether  (CAS  RN  1569-02-4),  propylene  glycol  mono  methylether  acetate  (CAS  RN 
108-65-6)  or  propyleneglycol  propylether  (CAS  RN  1569-01-3) 
0.2502 
ex 3208 90 19 
50 
Solution  containing  by  weight: 
0 % 
— 
31.12.2023 
—  (65  ±  10)  %  of  γ-butyrolactone, 
—  (30  ±  10)  %  of  polyamide  resin, 
—  (3,5  ±1,5)  %  of  naphthoquinone  ester  derivative,  and 
—  (1,5  ±0,5)  %  of  arylsilicic  acid 
02013R1387 
0.6726 
ex 3208 90 19 
55 
Preparation  of  5 %  or  more  but  not  more  than  20 %  by  weight  of  a  copolymer  of 
0 % 
— 
31.12.2020 
propylene  and  maleic  anhydride,  or  a  blend  of  polypropylene  and  a  copolymer  of 
propylene  and  maleic  anhydride,  or  a  blend  of  polypropylene  and  a  copolymer  of 
propylene,  isobutene  and  maleic  anhydride  in  an  organic  solvent 
— 
EN — 
0.4037 
ex 3208 90 19 
60 
Copolymer  of  hydroxystyrene  with  one  or  more  of  the  following: 
0 % 
— 
31.12.2021 
—  Styrene, 
01.07.2020 
—  Alkoxystyrene, 
—  Alkylacrylates, 
dissolved  in  ethyl  lactate 
— 
013.001 
0.6005 
ex 3208 90 19 
65 
Silicones  containing  50 %  by  weight  or  more  of  xylene  and  not  more  than  25 %  by 
0 % 
— 
31.12.2024 
weight  of  silica,  of  a  kind  used  for  the  manufacture  of  long  term  surgical  implants 
— 
0.4301 
ex 3208 90 19 
75 
Acenaphthalene  copolymer  in  ethyl  lactate  solution 
0 % 
— 
31.12.2022 
100
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3662 
ex 3215 11 00 
10 
Printing  ink,  liquid,  consisting  of  a  dispersion  of  a  vinyl  acrylate  copolymer  and  colour 
0 % 
— 
31.12.2023 
ex 3215 19 00 
10 
pigments  in  isoparaffins,  containing  by  weight  not  more  than  13 %  of  vinyl  acrylate 
copolymer  and  colour  pigments 
0.5777 
ex 3215 19 00 
20 
Ink: 
0 % 

31.12.2022 
—  consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and 
silver  chloride  (CAS  RN  7783-90-6)  in  methyl  propyl  ketone  (CAS  RN  107-87-9), 
—  with  a  total  solid  content  by  weight  of  55 %  or  more,  but  not  more  than  57 %,  and 
—  with  a  specific  density  of  1,40  g/cm3  or  more,  but  not  more  than  1,60  g/cm3 , 
for  use  in  the  manufacture  of  electrodes (2 ) 
0.2506 
ex 3215 90 70 
10 
Ink  formulation,  for  use  in  the  manufacture  of  ink-jet  cartridges (2 ) 
0 % 
— 
31.12.2023 
0.2501 
ex 3215 90 70 
20 
Heat  sensitive  ink  fixed  on  a  plastic  film 
0 % 
— 
31.12.2023 
02013R1387 
0.4533 
ex 3215 90 70 
30 
Disposable  cartridge  ink,  containing  by  weight: 
0 % 
— 
31.12.2023 
—  1 %  or  more,  but  not  more  than  10 %  of  amorphous  silicon  dioxide,  or 
—  3,8 %  or  more  of  dye  C.I.  Solvent  Black  7  in  organic  solvents, 
for  use  in  the  marking  of  integrated  circuits (2 ) 
— 
EN — 
0.5031 
ex 3215 90 70 
40 
Dry  ink  powder  with  a  base  of  hybrid  resin  (made  from  polystyrene  acrylic  resin  and 
0 % 
— 
31.12.2020 
polyester  resin)  mixed  with: 
—  wax, 
01.07.2020 
—  a  vinyl-based  polymer,  and 
—  a  colouring  agent, 
for  use  in  the  manufacture  of  toner  bottles  for  photocopiers,  fax  machines,  printers  and 
multifunction  devices (2 ) 
— 
013.001 
0.3661 
3301 12 10 
Essential  oil  of  orange,  not  deterpenated 
0 % 
— 
31.12.2023 
— 
0.4863 
ex 3402 11 90 
10 
Sodium  lauroyl  methyl  isethionate 
0 % 
— 
31.12.2020 
101
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4002 
ex 3402 13 00 
10 
Vinyl  copolymer  surface  active  agent  based  on  polypropylene  glycol 
0 % 
— 
31.12.2023 
0.4277 
ex 3402 13 00 
20 
Surfactant  containing  1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl  ether, 
0 % 
— 
31.12.2022 
polymerised  with  oxirane,  methyl  terminated 
0.6285 
ex 3402 90 10 
10 
Surface-active  mixture  of  methyltri-C8-C10-alkylammonium  chlorides 
0 % 
— 
31.12.2024 
0.3660 
ex 3402 90 10 
20 
Mixture  of  docusate  sodium  (INN)  and  sodium  benzoate 
0 % 
— 
31.12.2023 
0.4935 
ex 3402 90 10 
30 
Surface-active  preparation,  consisting  of  a  mixture  of  sodium  docusate  and  ethoxylated 
0 % 
— 
31.12.2020 
2,4,7,9-tetramethyldec-5-yne-4,7-diol  (CAS  RN  577-11-7  and  9014-85-1) 
0.4939 
ex 3402 90 10 
50 
Surface-active  preparation,  consisting  of  a  mixture  of  polysiloxane  and  poly(ethylene 
0 % 
— 
31.12.2020 
glycol) 
02013R1387 
0.4675 
ex 3402 90 10 
60 
Surface-active  preparation,  containing  2-ethylhexyloxymethyl  oxirane 
0 % 
— 
31.12.2020 
0.4676 
ex 3402 90 10 
70 
Surface-active  preparation,  containing  ethoxylated  2,4,7,9-tetramethyl-5-decyne-4,7-diol 
0 % 
— 
31.12.2024 
(CAS  RN  9014-85-1) 
— 
EN — 
0.7508 
ex 3501 90 90 
10 
Non  edible sodium  caseinate (CAS RN  9005-46-3)  in the form of powder  with a protein 
0 % 
— 
31.12.2023 
content of more than 88 % by  weight for use in the production  of thermoplastic granules 
01.07.2020 
0.2498 
ex 3506 91 90 
10 
Adhesive  based  on  an  aqueous  dispersion  of  a  mixture  of  dimerised  rosin  and  a 
0 % 
— 
31.12.2023 
copolymer  of  ethylene  and  vinyl  acetate  (EVA) 
— 
0.4003 
ex 3506 91 90 
30 
Two  component  microencapsulated  epoxy  adhesive  dispersed  in  a  solvent 
0 % 
— 
31.12.2023 
013.001 
0.4313 
ex 3506 91 90 
40 
Acrylic  pressure  sensitive  adhesive  with  a  thickness  of  0,076  mm  or  more  but  not  more 
0 % 
— 
31.12.2024 
than 0,127  mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm 
— 
supplied  on  a  release liner with  an  initial peel  adhesion  release value  of  not  less  than  15 
102
N/25  mm  (measured  according  to  ASTM  D3330) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6725 
ex 3506 91 90 
50 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2020 
—  15 %  or  more  but  not  more  than  60 %  of  styrene  butadiene  copolymers  or  styrene 
isoprene  copolymers,  and 
—  10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers, 
dissolved  in: 
—  Methyl  ethyl  ketone  (CAS  RN  78-93-3), 
—  Heptane  (CAS  RN  142-82-5),  and 
—  Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8) 
0.7268 
ex 3506 91 90 
60 
Temporary  wafer-bonding  adhesive  material  in  the  form  of  a  suspension  of  a  solid 
0 % 

31.12.2022 
polymer  in  D-limonene  (CAS  RN  5989-27-5)  with  a  polymeric  content  by  weight  of 
25 %  or  more  but  not  more  than  35 % 
0.7267 
ex 3506 91 90 
70 
Temporary  wafer-bonding  release  in  the  form  of  a  suspension  of  a  solid  polymer  in 
0 % 

31.12.2022 
cyclopentanone  (CAS  RN  120-92-3)  with  a  polymeric  content  of  not  more  than  10 % 
by  weight 
02013R1387 
0.6293 
ex 3507 90 90 
10 
Preparation  of Achromobacter lyticus  protease  (CAS  RN  123175-82-6)  for  use  in  the 
0 % 
— 
31.12.2024 
manufacture  of  human  and  analogue  insulin  products (2 ) 
— 
EN — 
0.6798 
ex 3507 90 90 
20 
Creatine  amidinohydrolase  (CAS  RN  37340-58-2) 
0 % 
— 
31.12.2020 
01.07.2020 
0.7050 
ex 3507 90 90 
30 
Salicylate  1-monooxygenase  (CAS  RN  9059-28-3)  in  aqueous  solution  with: 
0 % 
— 
31.12.2021 
—  an  enzyme  concentration  of  6,0  U/ml  or  more,  but  not  more  than  7,4  U/ml, 
—  a  concentration  by  weight  of  sodium  azide  (CAS  RN  26628-22-8)  of  not  more  than 
0,09 %,  and 
— 
—  a  pH  value  of  6,5  or  more,  but  not  more  than  8,5 
013.001 
0.4922 
ex 3601 00 00 
10 
Pyrotechnical  powder  in  the  form  of  granulate  of  cylindrical  shape,  composed  of 
0 % 
— 
31.12.2021 
— 
strontium nitrate or  copper  nitrate in  the  solution  of  nitroguanidine,  binder and  additives, 
used  as  a  component  of  airbag  inflators (2 ) 
103
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7318 
ex 3603 00 60 
10 
Igniters for gas generators with an overall maximum length of 20,34 mm or more but not 
0 % 
— 
31.12.2022 
more  than  29,4  mm  and  a  pin  length  of  6,68  mm  (±0,3  mm)  or  more  but  not  more  than 
7,54  mm  (±0,3  mm) 
_____ 
C3 
0.7338 
ex 3707 10 00 
60 
Sensitising  emulsion,  containing  by  weight: 
0 % 
— 
31.12.2022 
—  not  more  than  5 %  of  photoacid  generator, 
—  2 %  or  more  but  not  more  than  50 %  of  phenolic  resins,  and 
—  not  more  than  7 %  of  epoxy-containing  derivatives, 
02013R1387 
dissolved  in  heptan-2-one  and/or  ethyllactate 
0.5465 
ex 3801 90 00 
10 
Expandable  graphite  (CAS  RN  90387-90-9  and  CAS  RN  12777-87-6) 
0 % 
— 
31.12.2021 
— 
EN — 
0.6759 
ex 3802 10 00 
10 
Mixture  of  activated  carbon  and  polyethylene,  in  form  of  powder 
0 % 
— 
31.12.2020 
01.07.2020 
0.7368 
ex 3802 10 00 
20 
Chemically  activated  carbon  in  granular  form  with  a  Butane  Working  Capacity  of  11  g 
0 % 
— 
31.12.2022 
butane/100  ml  or  more  (as  determined  by  the  ASTM  D  5228  method)  used  for  vapour 
absorption  and  desorption  in  emission  control  canisters  of  motor  vehicles (2 ) 
— 
013.001 
0.7441 
ex 3802 10 00 
30 
Chemically  activated  carbon  in  pellet  (cylindrical)  form,  with: 
0 % 
— 
31.12.2021 
—  a  diameter  of  2  mm  or  more  but  not  more  than  3  mm,  and 
—  a  Butane  Working  Capacity  of  5  g  butane/100ml  or  more  (as  determined  by  the 
— 
ASTM  D  5228  method), 
used for vapour absorption and desorption in emission control canisters of motor vehicles (2 ) 
104
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2987 
3805 90 10 
Pine  oil 
1,7 % 
— 
31.12.2023 
0.2990 
ex 3808 91 90 
10 
Indoxacarb  (ISO)  and  its  (R)  isomer,  fixed  on  a  support  of  silicon  dioxide 
0 % 
— 
31.12.2023 
0.2988 
ex 3808 91 90 
30 
Preparation  containing  endospores  or  spores  and  protein  crystals  derived  from  either: 
0 % 
— 
31.12.2024 
 Bacillus thuringiensis Berliner  subsp. aizawai  and kurstaki,  or 
 Bacillusthuringiensis  subsp. kurstaki,  or 
 Bacillusthuringiensis  subsp. israelensis,  or 
 Bacillusthuringiensis  subsp. aizawai,  or 
 Bacillusthuringiensis  subsp. tenebrionis 
0.2983 
ex 3808 91 90 
40 
Spinosad  (ISO) 
0 % 
— 
31.12.2023 
02013R1387 
0.5710 
ex 3808 91 90 
60 
Spinetoram  (ISO)  (CAS  RN  935545-74-7),  preparation  of  two  spinosyn  components  (3'- 
0 % 
— 
31.12.2022 
ethoxy-5,6-dihydro  spinosyn  J)  and  (3'-ethoxy-spinosyn  L) 
— 
EN — 
0.6874 
ex 3808 92 30 
10 
Mancozeb  (ISO)  (CAS  RN  8018-01-7)  imported  in  immediate  packings  of  a  content  of 
0 % 
— 
31.12.2020 
500  kg  or  more (1 ) 
01.07.2020 
0.2986 
ex 3808 92 90 
10 
Fungicide in the form of a powder, containing by weight 65 % or more but not more than 
0 % 
— 
31.12.2023 
75 %  of  hymexazole  (ISO),  not  put  up  for  retail  sale 
— 
013.001 
0.2984 
ex 3808 92 90 
30 
Preparation  consisting  of  a  suspension  of  pyrithione  zinc  (INN)  in  water,  containing  by 
0 % 
— 
31.12.2023 
weight: 
—  24 %  or  more  but  not  more  than  26 %  of  pyrithione  zinc  (INN),  or 
— 
—  39 %  or  more  but  not  more  than  41 %  of  pyrithione  zinc  (INN) 
105
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4843 
ex 3808 92 90 
50 
Preparations  based  on  copper  pyrithione  (CAS  RN  14915-37-8) 
0 % 
— 
31.12.2024 
▼M13  _____ 
C3 
0.5137 
ex 3808 93 27 
40 
Preparation,  consisting  of  a  suspension  of  tepraloxydim  (ISO),  containing  by  weight: 
0 % 
— 
31.12.2021 
—  30 %  or  more  of  tepraloxydim  (ISO),  and 
—  not  more  than  70 %  of  a  petroleum  fraction  consisting  of  aromatic  hydrocarbons 
0.4753 
ex 3808 93 90 
10 
Preparation,  in  the  form  of  granules,  containing  by  weight: 
0 % 
— 
31.12.2024 
—  38,8 %  or  more  but  not  more  than  41,2 %  of  Gibberellin  A3,  or 
—  9,5 %  or  more  but  not  more  than  10,5 %  of  Gibberellin  A4  and  A7 
0.5048 
ex 3808 93 90 
20 
Preparation  consisting  of  benzyl(purin-6-yl)amine  in  a  glycol  solution,  containing  by 
0 % 
— 
31.12.2020 
weight: 
—  1,88 %  or  more  but  not  more  than  2,00 %  of  benzyl(purin-6-yl)amine, 
of  a  kind  used  in  plant  growth  regulators 
02013R1387 
0.5030 
ex 3808 93 90 
30 
Aqueous  solution  containing  by  weight: 
0 % 
— 
31.12.2020 
—  1,8 %  of  sodium  para-nitrophenolate, 
—  1,2 %  of  sodium  ortho-nitrophenolate, 
—  0,6 %  of  sodium  5-nitroguaiacolate, 
for  use  in  the  manufacture  of  a  plant  growth  regulator (2 ) 
— 
0.5039 
ex 3808 93 90 
40 
Mixed  white  powder  containing  by  weight: 
0 % 
— 
31.12.2020 
EN — 
—  3 %  or  more  but  not  more  than  3,6 %  of  1-methylcyclopropene  with  a  purity  more 
than  96 %,  and 
01.07.2020 
—  containing  less  than  0,05 %  of  each  impurity  of  1-chloro-2-methylpropene  and 
3-chloro-2-methylpropene, 
for  use  in  the  manufacture  of  a  growth  regulator  of  post-harvest  fruits,  vegetables  and 
ornamentals  with  a  specific  generator (2 ) 
— 
0.5088 
ex 3808 93 90 
50 
Preparation  in  the  form  of  powder,  containing  by  weight: 
0 % 
— 
31.12.2020 
013.001 
—  55 %  or  more  of  Gibberellin  A4, 
—  1 %  or  more  but  not  more  than  35 %  of  Gibberellin  A7, 
—  90 %  or  more  of  Gibberellin  A4  and  Gibberellin  A7  combined, 
—  not  more  than  10 %  of  a  combination  of  water  and  other  naturally  occurring 
— 
Gibberellins, 
106
of  a  kind  used  in  plant  growth  regulators 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7413 
ex 3808 93 90 
60 
Preparation  in  the  form  of  tablets  containing  by  weight: 
0 % 
— 
31.12.2022 
—  0,55 %  or  more  but  not  more  than  2,50 %  of  1-methylcyclopropene  (1-MCP)  (CAS 
RN  3100-04-7)  with  a  minimum  purity  of  96 %  or  more,  and 
—  less  than  0,05 %  of  each  of  the  two  impurities,  1-chloro-2-methylpropene  (CAS  RN 
513-37-1)  and  3-chloro-2-methylpropene  (CAS  RN  563-47-3), 
for  coating (2 ) 
0.6532 
ex 3808 94 20 
30 
Bromochloro-5,5-dimethylimidazolidine-2,4-dione  (CAS  RN  32718-18-6)  containing: 
0 % 
— 
31.12.2024 
—  1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione  (CAS  RN  118-52-5), 
—  1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione  (CAS  RN  77-48-5), 
—  1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione  (CAS  RN  16079-88-2),  and 
—  1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione  (CAS  RN  126-06-7) 
0.4920 
ex 3808 99 90 
10 
Oxamyl  (ISO)  (CAS  RN  23135-22-0)  in  a  solution  of  cyclohexanone  and  water 
0 % 
— 
31.12.2020 
0.6000 
ex 3808 99 90 
20 
Abamectin  (ISO)  (CAS  RN  71751-41-2) 
0 % 
— 
31.12.2023 
02013R1387 
0.2557 
ex 3809 91 00 
10 
Mixture  of  5-ethyl-2-methyl-2-oxo-1,3,2λ5 -dioxaphosphoran-5-ylmethyl  methyl  methyl­
0 % 
— 
31.12.2023 
phosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5 -dioxaphosphoran-5-ylmethyl) methyl­
phosphonate 
— 
EN — 
0.4406 
ex 3810 10 00 
10 
Soldering  or  welding  paste,  consisting  of  a  mixture  of  metals  and  resin  containing  by 
0 % 
— 
31.12.2023 
weight: 
—  70 %  or  more,  but  not  more  than  90 %  of  tin, 
01.07.2020 
—  not  more  than  10 %  of  one  or  more  metals  of  silver,  copper,  bismuth,  zinc,  or 
indium, 
for  use  in  the  electro  technical  industry (2 ) 
— 
0.4510 
ex 3811 19 00 
10 
Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl 
0 % 
— 
31.12.2024 
013.001 
manganese  tricarbonyl  in  an  aromatic  hydrocarbon  solvent,  containing  by  weight  not 
more  than: 
—  4,9 %  of  1,2,4-trimethyl-benzene, 
— 
—  4,9 %  of  naphthalene,  and 
—  0,5 %  of  1,3,5-trimethyl-benzene 
107
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3448 
ex 3811 21 00 
10 
Salts  of  dinonylnaphthalenesulphonic  acid,  in  the  form  of  a  solution  in  mineral  oils 
0 % 
— 
31.12.2023 
0.7223 
ex 3811 21 00 
11 
Dispersing  agent  and  oxidation  inhibitor  containing: 
0 % 
— 
31.12.2021 
—  o-amino  polyisobutylenephenol  (CAS  RN  78330-13-9), 
—  more  than  30 %  by  weight  but  not  more  than  50 %  by  weight  of  mineral  oils, 
used  in  the  manufacture  of  blends  of  additives  for  lubricating  oils (2 ) 
0.6904 
ex 3811 21 00 
12 
Dispersing  agent  containing: 
0 % 
— 
31.12.2020 
—  esters  of  polyisobutenyl  succinic  acid  and  pentaerythritol  (CAS  RN  103650-95-9), 
—  35 %  or  more  but  not  more  than  55 %  by  weight  of  mineral  oils,  and 
—  with  a  chlorine  content  of  not  more  than  0,05 %  by  weight, 
used  in  the  manufacture  of  blends  of  additives  for  lubricating  oils (2 ) 
02013R1387 
0.6018 
ex 3811 21 00 
13 
Additives  containing: 
0 % 
— 
31.12.2024 
—  borated  magnesium  (C16-C24)  alkylbenzene  sulphonates,  and 
— 
—  mineral  oils, 
EN — 
having  a  total  base  number  (TBN)  of  more  than  250,  but  not  more  than  350,  for  use  in 
the  manufacture  of  lubricating  oils (2 ) 
01.07.2020 
0.6906 
ex 3811 21 00 
14 
Dispersing  agent: 
0 % 
— 
31.12.2020 
—  containing polyisobutene succinimide derived from reaction products of polyethylene­
— 
polyamines  with  polyisobutenyl  succinic  anhydride  (CAS  RN  147880-09-9), 
013.001 
—  containing  35 %  or  more  but  not  more  than  55 %  by  weight  of  mineral  oils, 
—  with  a  chlorine  content  by  weight  of  not  more  than  0,05 %, 
—  having  a  total  base  number  of  less  than  15, 
— 
used  in  the  manufacture  of  blends  of  additives  for  lubricating  oils (2 ) 
108
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6907 
ex 3811 21 00 
16 
Detergent  containing: 
0 % 
— 
31.12.2020 
—  Calcium  salt  of  beta-aminocarbonyl  alkylphenol  (reaction  product  Mannich  base  of 
alkylphenol), 
—  40 %  or  more  but  not  more  than  60 %  by  weight  of  mineral  oils,  and 
—  having  a  total  base  number  more  than  120, 
used  in  the  manufacture  of  blends  of  additives  for  lubricating  oils (2 ) 
0.6905 
ex 3811 21 00 
18 
Detergent  containing: 
0 % 
— 
31.12.2020 
—  long  chain  alkyltoluene  calcium  sulphonates, 
—  more  than  30 %  but  not  more  than  50 %  by  weight  of  mineral  oils,  and 
—  having  a  total  base  number  of  more  than  310  but  not  more  than  340, 
used  in  the  manufacture  of  blends  of  additives  for  lubricating  oils (2 ) 
0.6430 
ex 3811 21 00 
19 
Additives  containing: 
0 % 
— 
31.12.2024 
—  a  polyisobutylene  succinimide  based  mixture,  and 
—  more  than  30 %  but  not  more  than  50 %  by  weight  of  mineral  oils, 
having a total base number of more than 40, for use in the manufacture of lubricating oils (2 ) 
02013R1387 
0.3449 
ex 3811 21 00 
20 
Additives for lubricating oils, based on  complex organic molybdenum  compounds,  in the 
0 % 
— 
31.12.2023 
form  of  a  solution  in  mineral  oil 
— 
EN — 
0.6012 
ex 3811 21 00 
25 
Additives  containing: 
0 % 
— 
31.12.2024 
—  a  (C8-18)  alkyl  polymethacrylate  copolymer  with  N-[3-(dimethylamino)propyl]me­
01.07.2020 
thacrylamide,  of  an  average  molecular  weight  (Mw)  of  more  than  10 000  but  not 
more  than  20 000,  and 
—  more  than  15 %,  but  not  more  than  30 %  by  weight  of  mineral  oils, 
for  use  in  the  manufacture  of  lubricating  oils (2 ) 
— 
013.001 
0.6022 
ex 3811 21 00 
27 
Additives  containing: 
0 % 
— 
31.12.2024 
—  10 % or more by weight of an ethylene-propylene copolymer chemically modified by 
succinic  anhydride  groups  reacted  with  3-nitroaniline,  and 
— 
—  mineral  oils, 
for  use  in  the  manufacture  of  lubricating  oils (2 ) 
109
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5717 
ex 3811 21 00 
30 
Additives  for  lubricating  oils,  containing  mineral  oils,  consisting  of  calcium  salts  of 
0 % 
— 
31.12.2022 
reaction  products  of  polyisobutylene  substituted  phenol  with  salicylic  acid  and  formal­
dehyde,  used  as  a  concentrated  additive  for  the  manufacture  of  engine  oils  through  a 
blending  process 
0.6013 
ex 3811 21 00 
33 
Additives  containing: 
0 % 
— 
31.12.2024 
—  calcium 
salts 
of 
heptylphenol 
reaction 
products 
with 
formaldehyde 
(CAS  RN  84605-23-2),  and 
—  mineral  oils, 
having a total base number (TBN) of more than 40 but not more than 100,  for use in the 
manufacture  of  lubricating  oils  or  overbased  detergents  for  use  in  lubricating  oils (2 ) 
0.6016 
ex 3811 21 00 
37 
Additives  containing: 
0 % 
— 
31.12.2024 
—  a  styrene-maleic  anhydride  copolymer  esterified  with  C4-C20  alcohols,  modified  by 
aminopropylmorpholine,  and 
02013R1387 
—  more  than  50 %  but  not  more  than  75 %  by  weight  of  mineral  oils, 
for  use  in  the  manufacture  of  lubricating  oils (2 ) 
— 
0.6435 
ex 3811 21 00 
48 
Additives  containing 
0 % 
— 
31.12.2024 
EN — 
—  overbased  magnesium  (C20-C24)  alkylbenzenesulphonates  (CAS  RN  231297-75-9), 
and 
—  by  weight  more  than  25 %  but  not  more  than  50 %  of  mineral  oils, 
01.07.2020 
having  a  total  base  number  of  more  than  350,  but  not  more  than  450,  for  use  in  the 
manufacture  of  lubricating  oils (2 ) 
— 
013.001 
0.5727 
ex 3811 21 00 
50 
Additives  for  lubricating  oils, 
0 % 
— 
31.12.2022 
—  based  on  calcium  C16-24  alkylbenzenesulphonates  (CAS  RN  70024-69-0), 
—  containing  mineral  oils, 
used  as  a  concentrated  additive  for  the  manufacture  of  engine  oils  through  a  blending 
— 
process 
110
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6437 
ex 3811 21 00 
53 
Additives  containing: 
0 % 
— 
31.12.2024 
—  overbased  calcium  petroleum  sulphonates  (CAS  68783-96-0)  with  a  sulphonate 
content  by  weight  of  15 %  or  more,  but  not  more  than  30 %,  and 
—  by  weight  more  than  40 %  but  not  more  than  60 %  of  mineral  oils, 
having  a  total  base  number  of  280  or  more  but  not  more  than  420,  for  use  in  the 
manufacture  of  lubricating  oils (2 ) 
0.6434 
ex 3811 21 00 
55 
Additives  containing: 
0 % 
— 
31.12.2024 
—  low  base  number  calcium  polypropylbenzenesulphonate  (CAS  RN  75975-85-8)  and 
—  by  weight  more  than  40 %  but  not  more  than  60 %  of  mineral  oils, 
having  a  total  base  number  of  more  than  10  but  not  more  than  25,  for  use  in  the  manu­
facture  of  lubricating  oils (2 ) 
0.5724 
ex 3811 21 00 
60 
Additives  for  lubricating  oils,  containing  mineral  oils: 
0 % 
— 
31.12.2022 
—  based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85- 
8)  with  a  content  by  weight  of  25 %  or  more  but  not  more  than  35 %, 
—  with  a  total  base  number  (TBN)  of  280  or  more  but  not  more  than  320, 
02013R1387 
used  as  a  concentrated  additive  for  the  manufacture  of  engine  oils  through  a  blending 
process 
— 
0.6431 
ex 3811 21 00 
63 
Additives  containing: 
0 % 
— 
31.12.2024 
—  an  overbased  mixture  of  calcium  petroleum  sulphonates  (CAS  RN  61789-86-4)  and 
EN — 
synthetic  calcium  alkylbenzenesulphonates  (CAS  RN  68584-23-6  and  CAS  RN 
70024-69-0)  with  a  total  sulphonate  content  by  weight  of  15 %  or  more,  but  not 
more  than  25 %,  and 
01.07.2020 
—  by  weight  more  than  40 %  but  not  more  than  60 %  of  mineral  oils, 
having  a  total  base  number  of  280  or  more  but  not  more  than  320,  for  use  in  the 
manufacture  of  lubricating  oils (2 ) 
— 
013.001 
0.6429 
ex 3811 21 00 
65 
Additives  containing: 
0 % 
— 
31.12.2024 
—  a  polyisobutylene  succinimide  based  mixture  (CAS  RN  160610-76-4),  and 
—  more  than  35 %  but  not  more  than  50 %  by  weight  of  mineral  oils, 
— 
having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a 
total  base  number  of  more  than  8,  for  use  in  the  manufacture  of  lubricating  oils (2 ) 
111
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5711 
ex 3811 21 00 
70 
Additives  for  lubricating  oils: 
0 % 
— 
31.12.2022 
—  containing  polyisobutylene  succinimide  derived  from  reaction  products  of  polyethy­
lenepolyamines  with  polyisobutenyl  succinic  anhydride  (CAS  RN  84605-20-9), 
—  containing  mineral  oils, 
—  with  a  chlorine  content  by  weight  of  0,05 %  or  more  but  not  more  than  0,25 %, 
—  with  a  total  base  number  (TBN)  of  more  than  20, 
used  as  a  concentrated  additive  for  the  manufacture  of  engine  oils  through  a  blending 
process 
0.6017 
ex 3811 21 00 
73 
Additives  containing: 
0 % 
— 
31.12.2023 
—  borated  succinimide  compounds  (CAS  RN  134758-95-5), 
—  mineral  oils,  and 
—  having  a  total  base  number  (TBN)  greater  than  40, 
for  use  in  the  manufacture  of  additive  mixtures  for  lubricating  oils (2 ) 
02013R1387 
0.6671 
ex 3811 21 00 
75 
Additives  containing: 
0 % 
— 
31.12.2020 
—  Calcium  (C10-C14)  dialkylbenzenesulfonates, 
—  more  than  40 %,  but  not  more  than  60 %  by  weight  of  mineral  oils, 
with  a  total  base  number  of  not  more  than  10,  for  use  in  the  manufacture  of  blends  of 
additives  for  lubricating  oils (2 ) 
— 
EN — 
0.6669 
ex 3811 21 00 
77 
Antifoam  additives  consisting  of: 
0 % 
— 
31.12.2020 
01.07.2020 
—  a  copolymer  of  2-ethylhexyl  acrylate  and  ethyl  acrylate,  and 
—  more  than  50 %  but  not  more  than  80 %  by  weight  of  mineral  oils, 
for  use  in  the  manufacture  of  additive  blends  for  lubricating  oils (2 ) 
— 
013.001 
0.6666 
ex 3811 21 00 
80 
Additives  containing: 
0 % 
— 
31.12.2020 
—  polyisobutylene  aromatic  polyamine  succinimide, 
—  more  than  40 %  but  not  more  than  60 %  by  weight  of  mineral  oils, 
with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in 
— 
the  manufacture  of  additive  blends  for  lubricating  oils (2 ) 
112
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6498 
ex 3811 21 00 
83 
Additives  containing: 
0 % 
— 
31.12.2024 
—  polyisobutene  succinimide  derived  from  reaction  of  polyethylenepolyamines  with 
polyisobutenyl  succinic  anhydride  (CAS  RN  84605-20-9), 
—  more  than  31,9 %  but  not  more  than  43,3 %  by  weight  of  mineral  oils, 
—  not  more  than  0,05 %  by  weight  chlorine,  and 
—  having  a  total  base  number  (TBN)  greater  than  20, 
for  use  in  the  manufacture  of  additives  blends  for  lubricating  oils (2 ) 
▼M13 
0.5718 
ex 3811 21 00 
85 
Additives: 
0 % 
— 
31.12.2022 
—  containing  more  than  20 %  or  more  but  not  more  than  45 %  by  weight  of  mineral 
oils, 
—  based  on  a  mixture  of  branched  dodecylphenol  sulfide  calcium  salts,  whether  or  not 
carbonated, 
for  use  in  the  manufacture  of  blends  of  additives (2 ) 
C3 
02013R1387 
0.6438 
ex 3811 29 00 
15 
Additives  containing: 
0 % 
— 
31.12.2024 
—  products  from  the  reaction  of  branched  heptyl  phenol  with  formaldehyde,  carbon 
disulphide  and  hydrazine  (CAS  RN  93925-00-9),  and 
—  more  than  15 %  but  not  more  than  28 %  by  weight  of  light  aromatic  petroleum 
naphtha  solvent, 
for  use  in  the  manufacture  of  lubricating  oils (2 ) 
— 
EN — 
▼M13 
01.07.2020 
0.7512 
ex 3811 29 00 
18 
Additives  consisting  of  dihydroxy  butanedioic  acid  –  (mixed  C12-16-alkyl  and  C13-rich 
0 % 
— 
31.12.2023 
C11-14-isoalkyl)  diester,  for  use  in  the  manufacture  of  engine  oils (2 ) 
C3 
— 
0.5721 
ex 3811 29 00 
20 
Additives  for  lubricating  oils,  consisting  of  reaction  products  of  bis(2-methylpentan-2- 
0 % 
— 
31.12.2022 
013.001 
yl)dithiophosphoric  acid  with  propylene  oxide,  phosphorus  oxide,  and  amines  with  C12- 
14  alkyl  chains,  used  as  a  concentrated  additive  for  the  manufacture  of  lubricating  oils 
— 
0.6432 
ex 3811 29 00 
25 
Additives  containing  at  least  salts  of  primary  amines  and  mono-  and  di-alkylphosphoric 
0 % 
— 
31.12.2024 
113
acids,  for  use  in  the  manufacture  of  lubricating  oils  or  greases (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5723 
ex 3811 29 00 
30 
Additives  for lubricating oils, consisting  of  reaction products  of  butyl-cyclohex-3-enecar­
0 % 
— 
31.12.2022 
boxylate,  sulphur  and  triphenyl phosphite  (CAS  RN  93925-37-2),  used  as  a  concentrated 
additive  for  the  manufacture  of  engine  oils  through  a  blending  process 
0.6433 
ex 3811 29 00 
35 
Additives  consisting  of  an  imidazoline  based  mixture  (CAS  RN  68784-17-8),  for  use  in 
0 % 
— 
31.12.2024 
the  manufacture  of  lubricating  oils (2 ) 
0.5728 
ex 3811 29 00 
40 
Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with 
0 % 
— 
31.12.2022 
sulphur  monochloride  and  sodium  sulphide  (CAS  RN  68511-50-2),  with  a  chlorine 
content  by  weight  of  0,01 %  or  more  but  not  more  than  0,5 %,  used  as  a  concentrated 
additive  for  the  manufacture  of  lubricating  oils 
0.6436 
ex 3811 29 00 
45 
Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate 
0 % 
— 
31.12.2024 
(CAS  RN  1330-86-5)  is more  than  85 %  by  weight  of  the  mixture,  for use  in  the  manu­
facture  of  lubricating  oils (2 ) 
02013R1387 
0.5719 
ex 3811 29 00 
50 
Additives  for  lubricating  oils,  consisting  of  a  mixture  of N,N-dialkyl  -2-hydroxyace­
0 % 
— 
31.12.2022 
tamides  with  alkyl  chain  lengths  between  12  and  18  carbon  atoms  (CAS  RN  866259- 
61-2),  used  as  a  concentrated  additive  for  the  manufacture  of  engine  oils  through  a 
blending  process 
— 
EN — 
0.6668 
ex 3811 29 00 
65 
Additives  consisting  of  a  sulphurised  mixture  of  vegetable  oil,  long  chain  α-olefins  and 
0 % 
— 
31.12.2020 
tall  oil  fatty  acids,  with  a  sulphur  content  of  8 %  or  more  but  not  more  than  12 %  by 
01.07.2020 
weight,  for  use  in  the  manufacture  of  blends  of  additives  for  lubricating  oils (2 ) 
0.6020 
ex 3811 29 00 
70 
Additives  consisting  of  dialkylphosphites  (in  which  the  alkyl  groups  contain  more  than 
0 % 
— 
31.12.2024 
80 %  by  weight  of  oleyl,  palmityl  and  stearyl  groups),  for  use  in  the  manufacture  of 
— 
lubricating  oils (2 ) 
013.001 
0.7205 
ex 3811 29 00 
75 
Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan- 
% (2 ) 
— 
31.12.2021 
— 
2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating 
oils (2 ) 
114
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6021 
ex 3811 29 00 
80 
Additives  containing: 
0 % 
— 
31.12.2024 
—  more  than  70 %  by  weight  of  2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole  (CAS  RN 
89347-09-1),  and 
—  more  than  15 %  by  weight  of  5-(tert-nonyldithio)-1,3,4-thiadiazole-2(3H)-thione 
(CAS  RN  97503-12-3), 
for  use  in  the  manufacture  of  lubricating  oils (2 ) 
0.6023 
ex 3811 29 00 
85 
Additives  consisting  of  a  mixture  of  3-((C9-11)-isoalkyloxy)tetrahydrothiophene  1,1- 
0 % 
— 
31.12.2024 
dioxide,  C10-rich  (CAS  RN  398141-87-2),  for  use  in  the  manufacture  of  lubricating 
oils (2 ) 
0.3730 
ex 3811 90 00 
10 
Dinonylnaphthylsulphonic  acid  salt,  in  a  mineral  oil  solution 
0 % 
— 
31.12.2023 
0.5565 
ex 3811 90 00 
40 
Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing 
0 % 
— 
31.12.2022 
by  weight  10 %  or  more  but  not  more  than  29,9 %  of  2-ethylhexanol 
02013R1387 
0.7204 
ex 3811 90 00 
50 
Corrosion  inhibitor  containing: 
0 % 
— 
31.12.2021 
—  polyisobutenyl  succinic  acid,  and 
—  more  than  5 %  and  not  more  than  20 %  by  weight  of  mineral  oils, 
— 
for  use  in  the  manufacture  of  blends  of  additives  for  fuels (2 ) 
EN — 
01.07.2020 
0.5147 
ex 3812 10 00 
10 
Rubber  accelerator  based  on  diphenyl  guanidine  granules  (CAS  RN  102-06-7) 
0 % 
— 
31.12.2021 
0.6045 
ex 3812 20 90 
10 
Plasticiser,  containing: 
0 % 
— 
31.12.2023 
— 
—  bis(2-ethylhexyl)-1,4-benzene  dicarboxylate  (CAS  RN  6422-86-2), 
—  more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 
013.001 
1962-75-0) 
— 
0.3444 
ex 3812 39 90 
20 
Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate 
0 % 
— 
31.12.2023 
115
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6055 
ex 3812 39 90 
25 
UV  photo  stabiliser  containing: 
0 % 
— 
31.12.2023 
—  α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- 
ω-hydroxypoly(oxy-1,2-ethanediyl)  (CAS  RN  104810-48-2), 
—  α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- 
ω-[3-[3-(2H-benzotriazol-2-yl)-5- (1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopro­
poxy]poly  (oxy-1,2-ethanediyl)  (CAS  RN  104810-47-1), 
—  polyethylene  glycol  of  a  weight  average  molecular  weight  (Mw)  of  300  (CAS  RN 
25322-68-3), 
—  bis  (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate  (CAS  RN  41556-26-7),  and 
—  methyl-1,2,2,6,6-pentamethyl-4-  piperidyl  sebacate  (CAS  RN  82919-37-7) 
0.3446 
ex 3812 39 90 
30 
Compound  stabilisers  containing  by  weight  15 %  or  more  but  not  more  than  40 %  of 
0 % 
— 
31.12.2024 
sodium  perchlorate  and  not  more  than  70 %  of  2-(2-methoxyethoxy)ethanol 
0.6054 
ex 3812 39 90 
35 
Mixture  containing  by  weight: 
0 % 
— 
31.12.2023 
—  25 % or more but not more than 55 % of a mixture of C15-18  tetramethylpiperidinyl 
esters  (CAS  RN  86403-32-9), 
02013R1387 
—  not  more  than  20 %  of  other  organic  compounds, 
—  on  a  carrier  of  polypropylene  (CAS  RN  9003-07-0)  or  amorphous  silica  (CAS  RN 
7631-86-9  or  112926-00-8) 
— 
0.4861 
ex 3812 39 90 
40 
Mixture  of: 
0 % 
— 
31.12.2023 
EN — 
—  80 %  (±  10 %)  by  weight  of  2-ethylhexyl  10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5- 
dithia-4-stannatetradecanoate  (CAS  RN  57583-35-4),  and 
—  20 %  (±  10 %)  by  weight  of  2-ethylhexyl  10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2- 
01.07.2020 
oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate  (CAS 
RN 
57583-34-3) 
0.5477 
ex 3812 39 90 
55 
UV-stabilizer,  containing: 
0 % 
— 
31.12.2021 
— 
—  2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol 
(CAS 
RN 
013.001 
2725-22-6),  and 
—  either N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine,  polymer with 
2,4-  dichloro-6-(4-morpholinyl)-1,3,5-triazine  (CAS  RN  193098-40-7),  or 
— 
—  N,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine,  polymer  with  2,4- 
dichloro-6-(4-morpholinyl)-1,3,5-triazine  (CAS  RN  82451-48-7) 
116
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5483 
ex 3812 39 90 
65 
Stabiliser  for  plastic  material  containing: 
0 % 
— 
31.12.2021 
—  2-ethylhexyl 
10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate 
(CAS  RN  57583-35-4), 
—  2-ethylhexyl 
10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8- 
oxa-3,5-dithia-4-stannatetradecanoate  (CAS  RN  57583-34-3),  and 
—  2-ethylhexyl  mercaptoacetate  (CAS  RN  7659-86-1) 
0.5372 
ex 3812 39 90 
70 
Light  stabiliser  containing: 
0 % 
— 
31.12.2021 
—  branched  and  linear  alkyl  esters  of  3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4- 
hydroxybenzenepropanoic  acid  (CAS  RN  127519-17-9),  and 
—  1-methoxy-2-propyl  acetate  (CAS  RN  108-65-6) 
0.5822 
ex 3812 39 90 
80 
UV-stabilizer,  consisting  of: 
0 % 
— 
31.12.2022 
—  a  hindered  amine: N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, 
polymer  with  2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine  (CAS  RN  193098-40-7), 
and 
02013R1387 
—  either  an  o-hydroxyphenyl  triazine  UV  light  absorber,  or 
—  a  chemically  modified  phenolic  compound 
— 
0.3441 
ex 3814 00 90 
20 
Mixture  containing  by  weight: 
0 % 
— 
31.12.2023 
EN — 
—  69 % or more but not more than 71 % of 1-methoxypropan-2-ol (CAS RN 107-98-2), 
—  29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate (CAS RN 
108-65-6) 
01.07.2020 
0.3731 
ex 3814 00 90 
40 
Azeotrope  mixtures containing  isomers of  nonafluorobutyl  methyl  ether and/or  nonafluo­
0 % 
— 
31.12.2023 
robutyl  ethyl  ether 
— 
013.001 
0.2800 
ex 3815 12 00 
10 
Catalyst,  in  the  form  of  granules  or  rings  of  a  diameter  of  3  mm  or  more  but  not  more 
0 % 
— 
31.12.2023 
than  10  mm,  consisting  of  silver  on  an  aluminium  oxide  support  and  containing  by 
— 
weight  8 %  or  more  but  not  more  than  40 %  of  silver 
117
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7574 
ex 3815 12 00 
20 
Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with: 
0 % 
— 
31.12.2023 
—  a  diameter  of  1,4  mm  or  more  but  not  more  than  2,0  mm,  and 
—  a  platinum  content  by  weight  of  0,2 %  or  more  but  not  more  than  0,5 % 
0.7585 
ex 3815 12 00 
30 
Catalyst: 
0 % 
— 
31.12.2023 
—  containing 0,3 gram per litre or more, but not more than 7 gram per litre of precious 
metals, 
—  deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/ 
zirconium  oxide, 
the  honeycomb  structure  having: 
—  a  nickel  content  of  1,26 %  by  weight  or  more,  but  not  more  than  1,29 %  by  weight, 
—  62  cells  per  cm2  or  more,  but  not  more  than  140  cells  per  cm2 , 
—  a  diameter  of  100  mm  or  more,  but  not  more  than  120  mm,  and 
—  a  length  of  60  mm  or  more,  but  not  more  than  150  mm, 
for  use  in  the  production  of  motor  vehicles (2 ) 
0.5508 
ex 3815 19 90 
10 
Catalysts  consisting  of  chromium  trioxide,  dichromium  trioxide  or  organometallic 
0 % 
— 
31.12.2021 
compounds  of  chromium,  fixed  on  a  silicon  dioxide  support  with  a  pore  volume  of  2 
02013R1387 
cm3 /g  or  more  (as  determined  by  the  nitrogen  absorption  method) 
0.7064 
ex 3815 19 90 
13 
Catalyst  consisting  of: 
0 % 
— 
31.12.2021 
—  chromium  trioxide  (CAS  RN  1333-82-0), 
—  dichromium  trioxide  (CAS  RN  1308-38-9), 
— 
on  a  support  of  aluminium  oxide  (CAS  RN  1344-28-1) 
EN — 
0.2799 
ex 3815 19 90 
15 
Catalyst,  in  the  form  of  a  powder,  consisting  of  a  mixture  of  metal  oxides  fixed  on  a 
0 % 
— 
31.12.2023 
01.07.2020 
support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of 
molybdenum, bismuth and iron evaluated together, for use in the manufacture of acryloni­
trile (2 ) 
— 
0.2798 
ex 3815 19 90 
20 
Catalyst: 
0 % 
— 
31.12.2023 
013.001 
—  in  the  form  of  solid  spheres, 
—  of  a  diameter  of  4  mm  or  more  but  not  more  than  12  mm,  and 
—  consisting  of  a  mixture  of  molybdenum  oxide  and  other  metal  oxides,  supported  on 
— 
silicon  dioxide  and/or  aluminium  oxide, 
118
for  use  in  the  manufacture  of  acrylic  acid (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6049 
ex 3815 19 90 
25 
Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, 
0 % 
— 
31.12.2023 
consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, 
nickel,  cobalt  and  iron,  on  a  support  of  aluminium  oxide,  for  use  in  the  manufacture  of 
acrylic  aldehyde (2 ) 
0.3435 
ex 3815 19 90 
30 
Catalyst  containing  titanium  tetrachloride supported  on  magnesium  dichloride,  for  use  in 
0 % 
— 
31.12.2023 
the  manufacture  of  polypropylene (2 ) 
0.7566 
ex 3815 19 90 
35 
Catalyst consisting of tungstosilicic acid hydrate (CAS RN 12027-43-9) impregnated on a 
0 % 
— 
31.12.2023 
support  of  silicon  dioxide  in  the  form  of  a  powder 
0.2792 
ex 3815 19 90 
65 
Catalyst  consisting  of  phosphoric  acid  chemically bonded  to  a  support  of  silicon  dioxide 
0 % 
— 
31.12.2023 
0.2791 
ex 3815 19 90 
70 
Catalyst  consisting  of  organo-metallic compounds  of  aluminium  and  zirconium,  fixed  on 
0 % 
— 
31.12.2023 
a  support  of  silicon  dioxide 
02013R1387 
0.2790 
ex 3815 19 90 
75 
Catalyst consisting  of  organo-metallic compounds  of  aluminium  and  chromium,  fixed  on 
0 % 
— 
31.12.2023 
a  support  of  silicon  dioxide 
— 
EN — 
0.2793 
ex 3815 19 90 
80 
Catalyst consisting of organo-metallic compounds  of magnesium and titanium, fixed on a 
0 % 
— 
31.12.2023 
support  of  silicon  dioxide,  in  the  form  of  a  suspension  in  mineral  oil 
01.07.2020 
0.2788 
ex 3815 19 90 
85 
Catalyst  consisting  of  organo-metallic  compounds  of  aluminium,  magnesium  and 
0 % 
— 
31.12.2023 
titanium,  fixed  on  a  support  of  silicon  dioxide,  in  the  form  of  powder 
— 
013.001 
0.3899 
ex 3815 19 90 
86 
Catalyst  containing  titanium  tetrachloride supported  on  magnesium  dichloride,  for  use  in 
0 % 
— 
31.12.2023 
the  manufacture  of  polyolefins (2 ) 
— 
0.4005 
ex 3815 90 90 
16 
Initiator  based  on  dimethylaminopropyl  urea 
0 % 
— 
31.12.2022 
119
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5704 
ex 3815 90 90 
18 
Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7- 
0 % 
— 
31.12.2022 
dimethyl-1H-1,4,7-triazonine-1-yl-kN1 ,  kN4 ,  kN7 )ethane-di-μ-oxo-μ-(ethanoato-kO,  kO')-, 
di[chloride(1-)]  (CAS  RN  1217890-37-3),  used  to  accelerate  chemical  oxidation  or 
bleaching 
0.7528 
ex 3815 90 90 
25 
Catalyst  consisting  by  weight  of: 
0 % 
— 
31.12.2023 
—  30 %  or  more  but  not  more  than  33 %  of  bis(4-(diphenylsulphonio)phenyl)sulphide 
bis(hexafluorophosphate)  (CAS  RN  74227-35-3),  and 
—  24 %  or  more  but  not  more  than  27 %  of  diphenyl(4-phenylthio)phenylsuphonium 
hexafluorophosphate  (CAS  RN  68156-13-8), 
in  propylene  carbonate  (CAS  RN  108-32-7) 
0.5062 
ex 3815 90 90 
30 
Catalyst,  consisting  of  a  suspension  in  mineral  oil  of: 
0 % 
— 
31.12.2020 
—  tetrahydrofuran  complexes  of  magnesium  chloride  and  titanium(III) chloride,  and 
—  silicon  dioxide, 
—  containing  6,6 %  (±0,6  %)  by  weight  of  magnesium,  and 
—  containing  2,3 %  (±0,2  %)  by  weight  of  titanium 
02013R1387 
0.7526 
ex 3815 90 90 
35 
Catalyst  containing  by  weight: 
0 % 
— 
31.12.2023 
—  25 %  or  more  but  not  more  than  27,5 %  of  bis[4-(diphenylsuphonio)phenyl]sulphide 
bis(hexafluoroantimonate)  (CAS  RN  89452-37-9),  and 
—  20 %  or  more  but  not  more  than  22,5 %  of  diphenyl(4-phenylthio)phenylsufonium 
— 
hexafluoroantimonate  (CAS  RN  71449-78-0), 
EN — 
in  propylene  carbonate  (CAS  RN  108-32-7) 
01.07.2020 
0.6006 
ex 3815 90 90 
40 
Catalyst: 
0 % 
— 
31.12.2023 
—  containing  molybdenum  oxide  and  other  metal  oxides  in  a  silicon  dioxide  matrix, 
—  in  the  form  of  hollow  cylindrical  solids  of  a  length  of  4  mm  or  more  but  not  more 
than  12  mm, 
for  use  in  the  manufacture  of  acrylic  acid (2 ) 
— 
013.001 
0.7243 
ex 3815 90 90 
43 
Catalyst  in  powder  form  consisting  by  weight  of: 
0 % 
— 
31.12.2022 
—  92,50 %  (±  2)  %  titanium  dioxide  (CAS  RN  13463-67-7), 
— 
—  5 %  (±  1)  %  silicon  dioxide  (CAS  RN  112926-00-8),  and 
—  2,5 %  (±1,5)  %  sulphur  trioxide  (CAS  RN  7446-11-9) 
120
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3433 
ex 3815 90 90 
50 
Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane 
0 % 
— 
31.12.2023 
containing  by  weight,  in  the hexane- or  heptane-free material, 9 %  or more but  not  more 
than  30 %  of  titanium 
0.2783 
ex 3815 90 90 
80 
Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a 
0 % 
— 
31.12.2020 
solution  in  isobutanol 
0.3430 
ex 3815 90 90 
81 
Catalyst,  containing  by  weight  69 %  or  more  but  not  more  than  79 %  of  (2-hydroxy-1- 
0 % 
— 
31.12.2023 
methylethyl)trimethylammonium  2-ethylhexanoate 
0.2782 
ex 3815 90 90 
85 
Catalyst  based  on  aluminosilicate  (zeolite),  for  the  alkylation  of  aromatic  hydrocarbons, 
0 % 
— 
31.12.2022 
for  the  transalkylation  of  alkylaromatic  hydrocarbons  or  for  the  oligomerization  of 
olefins (2 ) 
0.2909 
ex 3815 90 90 
86 
Catalyst,  in  the  form  of  rodlets,  consisting  of  an  aluminosilicate  (zeolite),  containing  by 
0 % 
— 
31.12.2023 
weight  2 %  or  more  but  not  more  than  3 %  of  rare-earth metal  oxides  and  less  than  1 % 
of  disodium  oxide 
02013R1387 
0.3732 
ex 3815 90 90 
88 
Catalyst,  consisting  of  titanium  tetrachloride  and  magnesium  chloride,  containing  by 
0 % 
— 
31.12.2023 
weight  on  an  oil-  and  hexane-free  basis: 
—  4 %  or  more  but  not  more  than  10 %  of  titanium,  and 
—  10 %  or  more  but  not  more  than  20 %  magnesium 
— 
EN — 
0.3733 
ex 3815 90 90 
89 Rhodococcus 
rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide 
0 % 
— 
31.12.2021 
gel  or  in  water,  for use  as  a  catalyst in  the  production  of  acrylamide by  the  hydration  of 
01.07.2020 
acrylonitrile (2 ) 
0.4408 
ex 3817 00 50 
10 
Mixture  of  alkylbenzenes  (C14-26)  containing  by  weight: 
0 % 
— 
31.12.2023 
—  35 %  or  more  but  not  more  than  60 %  of  eicosylbenzene, 
— 
—  25 %  or  more  but  not  more  than  50 %  of  docosylbenzene, 
013.001 
—  5 %  or  more  but  not  more  than  25 %  of  tetracosylbenzene 
0.3427 
ex 3817 00 80 
10 
Mixture  of  alkylnaphthalenes,  containing  by  weight: 
0 % 
— 
31.12.2023 
— 
—  88 %  or  more  but  not  more  than  98 %  of  hexadecylnaphthalene 
121
—  2 %  or  more  but  not  more  than  12 %  of  dihexadecylnaphthalene 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4581 
ex 3817 00 80 
20 
Mixture  of  branched  alkyl  benzenes  mainly  containing  dodecyl  benzenes 
0 % 
— 
31.12.2023 
0.5479 
ex 3817 00 80 
30 
Mixed  alkylnaphthalenes,  modified  with  aliphatic  chains,  of  a  chain-length  varying  from 
0 % 
— 
31.12.2021 
12  to  56  carbon  atoms 
0.4006 
ex 3819 00 00 
20 
Fire  resistant  hydraulic  fluid  based  on  phosphate  ester 
0 % 
— 
31.12.2023 
▼M13 
0.7922 
ex 3823 19 10 
20 
12-Hydroxyoctadecanoic  acid  (CAS  RN  106-14-9)  for  the  manufacture  of  polyglycerin- 
0 % 
— 
31.12.2024 
poly-12-hydroxyoctadecanoic  acid  esters (2 ) 
C3 
0.6038 
ex 3823 19 30 
20 
Palm fatty acid distillate, whether  or  not  hydrogenated,  with  free fatty acid  content  80 % 
0 % 
— 
31.12.2023 
ex 3823 19 30 
30 
or  more  for  use  in  the  manufacture  of: 
—  industrial  monocarboxylic  fatty  acids  of  heading  3823, 
02013R1387 
—  stearic  acid  of  heading  3823, 
—  stearic  acid  of  heading  2915, 
—  palmitic  acid  of  heading  2915,  or 
—  animal  feed  preparations  of  heading  2309 (2 ) 
— 
0.6037 
ex 3823 19 90 
20 
Palm  acid  oils  from  refining  for  use  in  the  manufacture  of: 
0 % 
— 
31.12.2023 
EN — 
ex 3823 19 90 
30 
—  industrial  monocarboxylic  fatty  acids  of  heading  3823, 
—  stearic  acid  of  heading  3823, 
—  stearic  acid  of  heading  2915, 
01.07.2020 
—  palmitic  acid  of  heading  2915,  or 
—  animal  feed  preparations  of  heading  2309 (2 ) 
0.7756 
ex 3824 78 90 
05 
Mixture  of  halogenated  derivatives  containing  by  weight: 
0 % 
— 
31.12.2024 
— 
—  30 %  or  more  but  not  more  than  60 %  of  difluoromethane  (CAS  RN  75-10-5), 
013.001 
—  30 % or more but not more than 60 % of trifluoroiodomethane (CAS RN 2314-97-8), 
—  10 %  or  more  but  not  more  than  30 %  of  pentafluoroethane  (CAS  RN  354-33-6) 
— 
0.2908 
ex 3824 99 15 
10 
Acid  aluminosilicate  (artificial zeolite  of  the  Y  type)  in  the  sodium  form,  containing  by 
0 % 
— 
31.12.2023 
122
weight  not  more  than  11 %  of  sodium  evaluated  as  sodium  oxide,  in  the  form  of  rodlets 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6810 
ex 3824 99 92 
23 
Butylphosphato  complexes  of  titanium(IV) (CAS  RN  109037-78-7),  dissolved  in  ethanol 
0 % 
— 
31.12.2020 
and  propan-2-ol 
0.7222 
ex 3824 99 92 
25 
Preparation  containing  by  weight: 
3,2 % 
— 
31.12.2020 
—  25 %  or  more  but  not  more  than  50 %  of  diethyl  carbonate  (CAS  RN  105-58-8), 
—  25 %  or  more  but  not  more  than  50 %  of  ethylene  carbonate  (CAS  RN  96-49-1), 
—  10 %  or  more  but  not  more  than  20 %  of  lithium  hexafluorophosphate  (CAS  RN 
21324-40-3) 
—  5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0), 
—  1 %  or  more  but  not  more  than  2 %  of  vinylene  carbonate  (CAS  RN  872-36-6), 
—  1 %  or  more  but  not  more  than  2 %  of  4-fluoro-1,3-dioxolane-2-one  (CAS  RN 
114435-02-8), 
—  not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9) 
0.7321 
ex 3824 99 92 
26 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2022 
—  60 %  or  more  but  not  more  than  75 %  of  Solvent  naphtha  (petroleum),  heavy 
aromatic  (CAS  RN  64742-94-5), 
02013R1387 
—  15 % or more but not more than 25 % of 4-(4-nitrophenylazo)-2,6-di-sec-butyl-phenol 
(CAS  RN  111850-24-9),  and 
—  10 %  or  more  but  not  more  than  15 %  of  2-sec-butylphenol  (CAS  RN  89-72-5) 
— 
0.7224 
ex 3824 99 92 
27 
4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile  (CAS  RN  675126-28-0)  in  an 
0 % 
— 
31.12.2021 
organic  solvent 
EN — 
01.07.2020 
0.6778 
ex 3824 99 92 
28 
Aqueous  solution  containing  by  weight: 
0 % 
— 
31.12.2020 
—  10 %  or  more  but  not  more  than  42 %  of  2-(3-chloro-5-(trifluoromethyl)pyridin-2- 
yl)ethanamine  (CAS  RN  658066-44-5), 
—  10 %  or  more  but  not  more  than  25 %  of  sulphuric  acid  (CAS  RN  7664-93-9),  and 
—  0,5 %  or  more  but  not  more  than  2,9 %  of  methanol  (CAS  RN  67-56-1) 
— 
013.001 
0.4909 
ex 3824 99 92 
29 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2020 
—  85 % or more but  not more than 99 % of  polyethylene  glycol  ether of butyl  2-cyano 
— 
3-(4-hydroxy-3-methoxyphenyl)  acrylate,  and 
—  1 %  or  more  but  not  more  than  15 %  of  polyoxyethylene  (20)  sorbitan  trioleate 
123
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7215 
ex 3824 99 92 
30 
Aqueous  solution  of  caesium  formate  and  potassium  formate  containing  by  weight: 
0 % 
— 
31.12.2021 
—  1 %  or  more  but  not  more  than  84 %  of  caesium  formate  (CAS  RN  3495-36-1), 
—  1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and 
—  whether  or  not  containing  not  more  than  9 %  of  additives 
0.7618 
ex 3824 99 92 
31 
Liquid  crystal  mixtures  for  use  in  the  manufacture  of  LCD  (liquid  crystal  display) 
0 % 
— 
31.12.2023 
modules (2 ) 
0.4707 
ex 3824 99 92 
32 
Mixture  of  divinylbenzene-isomers  and  ethylvinylbenzene-isomers,  containing  by  weight 
0 % 
— 
31.12.2024 
56 %  or  more  but  not  more  than  85 %  of  divinylbenzene  (CAS  RN  1321-74-0) 
0.3083 
ex 3824 99 92 
33 
Anti-corrosion  preparations  consisting  of  salts  of  dinonylnaphthalenesulphonic  acid, 
0 % 
— 
31.12.2023 
ex 3824 99 93 
40 
either: 
ex 3824 99 96 
40 
—  on  a  support  of  mineral  wax,  whether  or  not  modified  chemically,  or 
—  in  the  form  of  a  solution  in  an  organic  solvent 
02013R1387 
0.4153 
ex 3824 99 92 
35 
Preparations  containing  not  less  than  92 %  or  more  but  not  more  than  96,5 %  by  weight 
0 % 
— 
31.12.2023 
of  1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol  and  also  containing  carboxylic  acid 
derivatives  and  an  alkyl  sulphate 
— 
0.4083 
ex 3824 99 92 
36 
Calcium  phosphonate  phenate,  dissolved  in  mineral  oil 
0 % 
— 
31.12.2021 
EN — 
0.4523 
ex 3824 99 92 
37 
Mixture of  acetates of 3-butene-1,2-diol  with  a  content  by  weight  of  65 %  or  more  of  3- 
0 % 
— 
31.12.2023 
01.07.2020 
butene-1,2-diol  diacetate  (CAS  RN  18085-02-4) 
0.7722 
ex 3824 99 92 
38 
Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4) 
0 % 
— 
31.12.2024 
— 
013.001 
0.4152 
ex 3824 99 92 
39 
Preparation  containing  not  less  than  47 %  by  weight  of  1,3:2,4-bis-O-benzylidene-D- 
0 % 
— 
31.12.2023 
glucitol 
— 
124
0.6779 
ex 3824 99 92 
40 
Solution  of  2-chloro-5-(chloromethyl)-pyridine  (CAS  RN  70258-18-3)  in  organic  diluent 
0 % 
— 
31.12.2020 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6091 
ex 3824 99 92 
42 
Preparation  of  tetrahydro-α-(1-naphthylmethyl)furan-2-propionic  acid  (CAS  RN  25379- 
0 % 
— 
31.12.2023 
26-4)  in  toluene 
0.7724 
ex 3824 99 92 
43 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2024 
—  65 %  or  more,  but  not  more  than  95 %  of  isopropylated  triaryl phosphate  (CAS  RN 
68937-41-7),  and 
—  5 %  or  more,  but  not  more  than  35 %  of  triphenyl  phosphate  (CAS  RN  115-86-6) 
0.3067 
ex 3824 99 92 
45 
Preparation  consisting  predominantly  of  γ-butyrolactone  and  quaternary  ammonium  salts, 
0 % 
— 
31.12.2023 
for  the  manufacture  of  electrolytic  capacitors (2 ) 
0.6068 
ex 3824 99 92 
46 
Diethylmethoxyborane  (CAS  RN  7397-46-8)  in the  form of a  solution  in  tetrahydrofuran 
0 % 
— 
31.12.2020 
02013R1387 
0.5475 
ex 3824 99 92 
47 
Preparation,  containing: 
0 % 
— 
31.12.2022 
—  trioctylphosphine  oxide  (CAS  RN  78-50-2), 
—  dioctylhexylphosphine  oxide  (CAS  RN  31160-66-4), 
—  octyldihexylphosphine  oxide  (CAS  RN  31160-64-2),  and 
—  trihexylphosphine  oxide  (CAS  RN  3084-48-8) 
— 
EN — 
0.4279 
ex 3824 99 92 
49 
Preparation  based  on  2,5,8,11-tetramethyl-6-dodecyn-5,8-diol  ethoxylate  (CAS  RN 
0 % 
— 
31.12.2022 
01.07.2020 
169117-72-0) 
0.4292 
ex 3824 99 92 
50 
Alkyl  carbonate-based  preparation,  also  containing  a  UV  absorber,  for  use  in  the  manu­
0 % 
— 
31.12.2022 
— 
facture  of  spectacle  lenses (2 ) 
013.001 
0.3065 
ex 3824 99 92 
51 
Mixture  containing  by  weight  40 %  or  more  but  not  more  than  50 %  of  2-hydroxyethyl 
0 % 
— 
31.12.2023 
— 
methacrylate  and  40 %  or  more  but  not  more  than  50 %  of  glycerol  ester  of  boric  acid 
125
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7742 
ex 3824 99 92 
52 
Electrolyte  containing: 
3,2 % 
— 
31.12.2020 
—  5 %  or more but  not  more than 20 %  lithium hexafluorophosphate  (CAS  RN  21324- 
40-3)  or  lithium  tetrafluoroborate  (CAS  RN  14283-07-9), 
—  60 %  or  more  but  not  more than  90 %  of  a  mixture of  ethylene carbonate  (CAS  RN 
96-49-1),  dimethyl  carbonate  (CAS  RN  616-38-6  )  and/or  ethyl  methyl  carbonate 
(CAS  RN  623-53-0), 
—  0,5 %  or  more  but  not  more  than  20 %  1,3,2-dioxathiolane  2,2-dioxide  (CAS  RN 
1072-53-3), 
for  use  in  the  manufacture  of  motor  vehicle  batteries (2 ) 
0.3061 
ex 3824 99 92 
53 
Preparations  consisting  predominantly  of  ethylene  glycol  and: 
0 % 
— 
31.12.2023 
—  either  diethylene  glycol,  dodecanedioic  acid  and  ammonia  water, 
—  or  N,N-dimethylformamide, 
—  or  γ-butyrolactone, 
—  or  silicon  oxide, 
—  or  ammonium  hydrogen  azelate, 
—  or  ammonium  hydrogen  azelate  and  silicon  oxide, 
—  or  dodecanedioic  acid,  ammonia  water  and  silicon  oxide, 
for  the  manufacture  of  electrolytic  capacitors (2 ) 
02013R1387 
0.4434 
ex 3824 99 92 
54 
Poly(tetramethylene  glycol)  bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate]  with  an  average 
0 % 
— 
31.12.2021 
polymer  chain  length  of  less  than  5  monomer  units  (CAS  RN  813452-37-8) 
— 
EN — 
0.6025 
ex 3824 99 92 
55 
Additives  for  paints  and  coatings,  containing: 
0 % 
— 
31.12.2023 
—  a  mixture  of  esters  of  phosphoric  acid  obtained  from  the  reaction  of  phosphoric 
01.07.2020 
anhydride  with  4-(1,1-dimethylpropyl)  phenol  and  copolymers  of  styrene-allyl 
alcohol  (CAS  RN  84605-27-6),  and 
—  30 %  or  more  but  not  more  than  35 %  by  weight  of  isobutyl  alcohol 
— 
0.4431 
ex 3824 99 92 
56 
Poly(tetramethylene  glycol)  bis[(2-benzoyl-phenoxy)acetate]  with  an  average  polymer 
0 % 
— 
31.12.2024 
013.001 
chain  length  of  less  than  5  monomer  units 
— 
0.4425 
ex 3824 99 92 
57 
Poly(ethylene  glycol)  bis(p-dimethyl)aminobenzoate  with  an  average  polymer  chain 
0 % 
— 
31.12.2024 
length  of  less  than  5  monomer  units 
126
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6067 
ex 3824 99 92 
59 
Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran 
0 % 
— 
31.12.2023 
0.5043 
ex 3824 99 92 
60 
N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy 
0 % 
— 
31.12.2020 
anhydride  in  a  solution  of  dichloromethane  at  37 % 
0.5050 
ex 3824 99 92 
61 
3',4',5'-Trifluorobiphenyl-2-amine,  in  the  form  of  a  solution  in  toluene  containing  by 
0 % 
— 
31.12.2020 
weight  80 %  or  more  but  not  more  than  90 %  of  3',4',5'-trifluorobiphenyl-2-amine 
▼M13 
0.7831 
ex 3824 99 92 
62 
Solution  of  9-borabicyclo[3.3.1]nonane  (CAS  RN  280-64-8)  in  tetrahydrofurane  (CAS 
0 % 
— 
31.12.2024 
RN  109-99-9),  containing  by  weight  6 %  or  more  9-borabicyclo[3.3.1]nonane 
C3 
0.5169 
ex 3824 99 92 
64 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2021 
—  89 %  or  more  but  not  more  than  98,9 %  of  1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylp­
henyl)methylene]-nonitol, 
02013R1387 
—  0,1 %  or  more  but  not  more  than  1 %  of  colourants, 
—  1 %  or  more  but  not  more  than  10 %  of  fluoropolymers 
0.3122 
ex 3824 99 92 
65 
Mixture  of  primary tert-alkylamines 
0 % 
— 
31.12.2024 
— 
0.6720 
ex 3824 99 92 
68 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2020 
EN — 
—  20 %  (±1 %)  ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl)  Tribenzene  (CAS  RN 
1404190-37-9), 
dissolved  in: 
01.07.2020 
—  10 %  (±  5 %)  2-sec-Butylphenol  (CAS  RN  89-72-5), 
—  64 %(  ±7 %)  Solvent  naphtha  (petroleum),  heavy  aromatic  (CAS  RN  64742-94-5), 
and 
—  6 %  (±1,0  %)  Naphthalene  (CAS  RN  91-20-3) 
— 
013.001 
0.6719 
ex 3824 99 92 
69 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2020 
—  80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS 
RN  5945-33-5), 
—  7 %  or  more  but  not  more  than  20 %  oligomers  of  Bisphenol-A  bis(diphenyl  phos­
— 
phate),  and 
127
—  not  more  than  1 %  triphenyl  phosphate  (CAS  RN  115-86-6) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4409 
ex 3824 99 92 
70 
Mixture  of  80 %  (±  10 %)  of  1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine  and  20 %  (± 
0 % 
— 
31.12.2024 
10 %)  of  1-({[2-(2-aminobutoxy)ethoxy]methyl}  propoxy)but-2-ylamine 
0.6198 
ex 3824 99 92 
72 
N-(2-Phenylethyl)-1,3-benzenedimethanamine  derivatives  (CAS  RN  404362-22-7) 
0 % 
— 
31.12.2023 
0.6114 
ex 3824 99 92 
76 
Preparation  containing: 
0 % 
— 
31.12.2023 
—  74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benze­
neacetonitrile  (CAS  RN  61826-76-4),  and 
—  10 %  or  more  but  not  more  than  26 %  by  weight  of  toluene  (CAS  RN  108-88-3) 
0.5834 
ex 3824 99 92 
80 
Diethylene  glycol  propylene  glycol  triethanolamine  titanate complexes  (CAS  RN  68784- 
0 % 
— 
31.12.2022 
48-5)  dissolved  in  diethylene  glycol  (CAS  RN  111-46-6) 
0.6546 
ex 3824 99 92 
82 
T-butylchloride  dimethylsilane  (CAS  RN  18162-48-6)  solution  in  toluene 
0 % 
— 
31.12.2024 
0.3074 
ex 3824 99 92 
84 
Preparation  consisting  by  weight  of  83 %  or  more  of  3a,4,7,7a-tetrahydro-4,7-metha­
0 % 
— 
31.12.2023 
noindene  (dicyclopentadiene),  a  synthetic  rubber,  whether  or  not  containing  by  weight 
7 %  or  more  of  tricyclopentadiene,  and: 
02013R1387 
—  either  an  aluminium-alkyl  compound,  or 
—  an  organic  complex  of  tungsten,  or 
—  an  organic  complex  of  molybdenum 
▼M13 
— 
EN — 
0.3069 
ex 3824 99 92 
88 
2,4,7,9-Tetramethyldec-5-yne-4,7-diol,  hydroxyethylated  (CAS  RN  9014-85-1) 
0 % 
— 
31.12.2020 
C3 
01.07.2020 
0.5961 
ex 3824 99 93 
30 
Powder  Mixture  containing  by  weight: 
0 % 
— 
31.12.2024 
—  85 %  or  more  of  zinc  diacrylate  (CAS  RN  14643-87-9), 
—  not  more  than  5 %  of  2,6-di-tert-butyl-alpha-dimethylamino-p-cresol  (CAS  RN 
— 
0  aus=y88-27-7),  and 
013.001 
—  not  more  than  10 %  of  zinc  stearate  (CAS  RN  557-05-1) 
▼M13 
— 
128
0.4719 
ex 3824 99 93 
35 
Paraffin  with  a  level  of  chlorination  of  70 %  or  more  (CAS  RN  63449-39-8) 
0 % 
— 
31.12.2024 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7379 
ex 3824 99 93 
38 
Mixture  of  4,4'-(perfluoroisopropylidene)diphenol  (CAS  RN  1478-61-1)  and  4,4'-(perflu­
0 % 
— 
31.12.2022 
oroisopropylidene)diphenol  benzyl  triphenyl  phosphonium  salt  (CAS  RN  75768-65-9) 
0.4527 
ex 3824 99 93 
42 
Mixture  of  bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone,  diphenylto­
0 % 
— 
31.12.2023 
luene-2,4-dicarbamate  and  1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycar­
bonylamino-tolyl)-urea 
0.7153 
ex 3824 99 93 
45 
Sodium  hydrogen  3-aminonaphthalene-1,5-disulphonate  (CAS  RN  4681-22-5)  containing 
0 % 
— 
31.12.2021 
by  weight: 
—  not  more  than  20 %  of  disodium  sulphate,  and 
—  not  more  than  10 %  of  sodium  chloride 
0.7786 
ex 3824 99 93 
48 
Nonhalogenated  flame  retardant  containing  by  weight: 
0 % 
— 
31.12.2024 
—  50 % or more, but not more than 65 % of piperazine pyrophosphate (CAS RN 66034- 
17-1), 
—  35 %  or  more,  but  not  more  than  45 %  of  a  phosphoric  acid  derivative,  and 
—  not  more  than  6 %  of  zinc  oxide  (CAS  RN  1314-13-2) 
02013R1387 
0.7063 
ex 3824 99 93 
50 
Preparation,  consisting  of  acesulfame  potassium  (CAS  RN  55589-62-3)  and  potassium 
0 % 
— 
31.12.2021 
hydroxide  (CAS  RN  1310-58-3) 
0.6215 
ex 3824 99 93 
53 
Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 
0 % 
— 
31.12.2023 
— 
2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder 
EN — 
0.6997 
ex 3824 99 93 
55 
Mixture  containing  by  weight: 
0 % 
— 
31.12.2021 
01.07.2020 
—  70 %  or  more,  but  not  more  than  90 %  of  (S)-indoline-2-carboxylic  acid  (CAS  RN 
79815-20-6),  and 
—  10 %  or  more,  but  not  more  than  30 %  of  o-chlorocinnamic  acid  (CAS  RN 
3752-25-8) 
— 
0.7497 
ex 3824 99 93 
60 
Mixture  of  phytosterols  (CAS  RN  949109-75-5)  in  powder  form  containing  by  weight: 
0 % 
— 
31.12.2023 
013.001 
—  40 %  or  more  but  not  more  than  88 %  of  sitosterols, 
—  20 %  or  more  but  not  more  than  63 %  of  campesterols, 
—  14 %  or  more  but  not  more  than  38 %  of  stigmasterols, 
— 
—  not  more  than  13 %  brassicasterols,  and 
129
—  not  more  than  5 %  sitostanols 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4290 
ex 3824 99 93 
63 
Mixture  of  phytosterols,  not  in  the  form  of  powder,  containing  by  weight: 
0 % 
— 
31.12.2022 
—  75 %  or  more  of  sterols, 
—  not  more  than  25 %  of  stanols, 
for  use  in  the  manufacture  of  stanols/sterols  or  stanol/sterol  esters (2 ) 
0.7460 
ex 3824 99 93 
65 
Reaction  mass  of  1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpro­
0 % 
— 
31.12.2023 
poxy)benzene]  (CAS  RN  97416-84-7)  and  1,3-dibromo-2-(2,3-dibromo-2-methylpro­
poxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene 
0.3117 
ex 3824 99 93 
70 
Oligomeric  reaction  product,  consisting  of  bis(4-hydroxyphenyl)  sulfone  and  1,1'- 
0 % 
— 
31.12.2024 
oxybis(2-chloroethane) 
0.3112 
ex 3824 99 93 
75 
Mixture  of  phytosterols,  in  the  form  of  flakes  and  balls,  containing  by  weight  80 %  or 
0 % 
— 
31.12.2024 
more  of  sterols  and  not  more  than  4 %  of  stanols 
02013R1387 
0.5817 
ex 3824 99 93 
83 
Preparation  containing: 
0 % 
— 
31.12.2023 
ex 3824 99 96 
85 
—  C,C'-azodi(formamide)  (CAS  RN  123-77-3), 
—  magnesium  oxide  (CAS  RN  1309-48-4),  and 
— 
—  zinc  bis(p-toluene  sulphinate)  (CAS  RN  24345-02-6), 
in  which  the  gas  formation  from  C,C'-azodi(formamide)  occurs  at  135  °C 
EN — 
01.07.2020 
0.3049 
ex 3824 99 93 
85 
Particles of silicon dioxide on which are covalently bonded organic compounds, for use in 
0 % 
— 
31.12.2023 
ex 3824 99 96 
57 
the manufacture of high performance liquid chromatography columns (HPLC) and sample 
preparation  cartridges (2 ) 
— 
013.001 
0.4336 
ex 3824 99 93 
88 
Mixture  of  phytosterols  containing  by  weight: 
0 % 
— 
31.12.2022 
—  60 %  or  more,  but  not  more  than  80 %  of  sitosterols, 
—  less  than  15 %  of  campesterols, 
—  less  than  5 %  of  stigmasterols,  and 
— 
—  less  than  15 %  of  betasitostanols 
130
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7420 
ex 3824 99 96 
30 
Rare-earth  concentrate  containing  by  weight: 
0 % 
— 
31.12.2022 
—  20 %  or  more  but  not  more  than  30 %  of  cerium  oxide  (CAS  RN  1306-38-3), 
—  2 %  or  more  but  not  more  than  10 %  of  lanthanum  oxide  (CAS  RN  1312-81-8), 
—  10 %  or  more  but  not  more  than  15 %  of  yttrium  oxide  (CAS  RN  1314-36-9),  and 
—  not  more  than  65 %  of  zirconium  oxide  (CAS  RN  1314-23-4)  including  natural 
occurring  hafnium  oxide 
0.7611 
ex 3824 99 96 
33 
Buffer  cartridge  not  exceeding  8000  ml  containing: 
0 % 
— 
31.12.2023 
—  0,05 %  or  more  but  not  more  than  0,1 %  by  weight  of  5-Chloro-2-methyl-2,3-dihy­
droisothiazol-3-one  (CAS  RN  55965-84-9),  and 
—  0,05 %  or  more  but  not  more  that  0,1 %  by  weight  of  2-Methyl-2,3-dihydroiso­
thiazol-3-one  (CAS  RN  2682-20-4)  as  a  biostatic 
0.3078 
ex 3824 99 96 
35 
Calcined  bauxite  (refractory  grade) 
0 % 
— 
31.12.2023 
0.4542 
ex 3824 99 96 
37 
Structured  silica  alumina  phosphate 
0 % 
— 
31.12.2024 
02013R1387 
0.7313 
ex 3824 99 96 
45 
Lithium  nickel  cobalt  aluminium  oxide  powder  (CAS  RN  177997-13-6)  with: 
3,2 % 
— 
31.12.2020 
—  a  particle  size  of  less  than  10  μm, 
—  a  purity  by  weight  of  more  than  98 % 
— 
0.6628 
ex 3824 99 96 
46 
Manganese  zinc  ferrite  granulate,  containing  by  weight: 
0 % 
— 
31.12.2020 
—  52 %  or  more  but  not  more  than  76 %  of  iron(III)oxide, 
EN — 
—  13 %  or  more  but  not  more  than  42 %  of  manganese  oxide,  and 
—  2 %  or  more  but  not  more  than  22 %  of  zinc  oxide 
01.07.2020 
0.3064 
ex 3824 99 96 
47 
Mixed  metals  oxides,  in  the  form  of  powder,  containing  by  weight: 
0 % 
— 
31.12.2023 
—  either  5 %  or  more  of  barium,  neodymium  or  magnesium  and  15 %  or  more  of 
titanium, 
— 
—  or  30 %  or  more  of  lead  and  5 %  or  more  of  niobium, 
013.001 
for  use  in  the  manufacture  of  dielectric  films  or  for  use  as  dielectric  materials  in  the 
manufacture  of  multilayer  ceramic  capacitors (2 ) 
— 
0.6749 
ex 3824 99 96 
48 
Zirconium  oxide  (ZrO 2),  calcium  oxide  stabilised  (CAS  RN  68937-53-1)  with  a 
0 % 
— 
31.12.2020 
131
zirconium  oxide  content  by  weight  of  92 %  or  more  but  not  more  than  97 % 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5607 
ex 3824 99 96 
50 
Nickel  hydroxide,  doped  with  12 %  or  more  but  not  more  than  18 %  by  weight  of  zinc 
0 % 
— 
31.12.2022 
hydroxide  and  cobalt  hydroxide,  of  a  kind  used  to  produce  positive  electrodes  for 
accumulators 
0.6145 
ex 3824 99 96 
55 
Carrier  in  powder  form,  consisting  of: 
0 % 
— 
31.12.2023 
—  ferrite  (Iron  oxide)  (CAS  RN  1309-37-1), 
—  manganese  oxide  (CAS  RN  1344-43-0), 
—  magnesium  oxide  (CAS  RN  1309-48-4), 
—  styrene  acrylate  copolymer, 
to  be  mixed  with  the  toner  powder,  in  the  manufacturing  of  ink/toner  filled  bottles  or 
cartridges  for  facsimile  machines,  computer  printers  and  copiers (2 ) 
0.5141 
ex 3824 99 96 
60 
Fused  magnesia  containing  by  weight  15 %  or  more  of  dichromium  trioxide 
0 % 
— 
31.12.2021 
02013R1387 
0.3050 
ex 3824 99 96 
65 
Aluminium  sodium  silicate,  in  the  form  of  spheres  of  a  diameter  of: 
0 % 
— 
31.12.2023 
—  either  1,6  mm  or  more  but  not  more  than  3,4  mm,  or 
—  4  mm  or  more  but  not  more  than  6  mm 
— 
EN — 
0.7212 
ex 3824 99 96 
70 
Powder  containing  by  weight: 
0 % 
— 
31.12.2021 
—  28 %  or  more  but  not  more  than  51 %  of  talc  (CAS  RN  14807-96-6), 
01.07.2020 
—  30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808- 
60-7), 
—  17 %  or  more  but  not  more  than  26 %  of  aluminium  oxide  (CAS  RN  1344-28-1) 
— 
013.001 
0.3119 
ex 3824 99 96 
73 
Reaction  product,  containing  by  weight: 
0 % 
— 
31.12.2024 
—  1 %  or  more  but  not  more  than  40 %  of  molybdenum  oxide, 
—  10 %  or  more  but  not  more  than  50 %  of  nickel  oxide, 
— 
—  30 %  or  more  but  not  more  than  70 %  of  tungsten  oxide 
132
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7010 
ex 3824 99 96 
74 
Mixture  with  a  non-stoichiometric  composition: 
0 % 
— 
31.12.2021 
—  with  a  crystalline  structure, 
—  with  a  content  of  fused  magnesia-alumina  spinel  and  with  admixtures  of  silicate 
phases  and  aluminates,  at  least  75 %  by  weight  of  which  consists  of  fractions  with 
a  grain  size  of  1-3  mm  and  at  most  25 %  consists  of  fractions  with  a  grain  size  of 
0-1  mm 
0.7147 
ex 3824 99 96 
80 
Mixture  consisting  of: 
0 % 
— 
31.12.2021 
—  64 %  or  more,  but  not  more  than  74 %  by  weight  of  amorphous  silica  (CAS  RN 
7631-86-9), 
—  25 %  or  more,  but  not  more  than  35 %  by  weight  of  butanone  (CAS  RN  78-93-3), 
and 
—  not  more  than  1 %  by  weight  of  3-(2,3-epoxypropoxy)propyltrimethoxysilane  (CAS 
RN  2530-83-8) 
0.7553 
ex 3824 99 96 
83 
Cubic  Boron  nitride  (CAS  RN  10043-11-5)  coated  with  nickel  and/or  nickelphosphide 
0 % 
— 
31.12.2023 
(CAS  RN  12035-64-2) 
02013R1387 
0.5820 
ex 3824 99 96 
87 
Platinum  oxide  (CAS  RN  12035-82-4)  fixed  on  a  porous  support  of  aluminium  oxide 
0 % 
— 
31.12.2022 
(CAS  RN  1344-28-1),  containing  by  weight: 
—  0,1 %  or  more  but  not  more  than  1 %  of  platinum,  and 
—  0,5 %  or  more  but  not  more  than  5 %  of  ethylaluminium  dichloride  (CAS  RN 
— 
563-43-9) 
EN — 
0.5939 
ex 3826 00 10 
20 
Mixture  of  fatty  acid  methyl  esters  containing  by  weight  at  least: 
0 % 
— 
31.12.2023 
01.07.2020 
ex 3826 00 10 
29 
—  65 %  or  more  but  not  more  than  75 %  of  C12  FAME, 
—  21 %  or  more  but  not  more  than  28 %  of  C14  FAME, 
—  4 %  or  more  but  not  more  than  8 %  of  C16  FAME, 
for  use  in  the  manufacture  of  detergents  and  home  and  personal  care  products (2 ) 
— 
013.001 
0.5941 
ex 3826 00 10 
50 
Mixture  of  fatty  acid  methyl  esters  containing  by  weight  at  least: 
0 % 
— 
31.12.2023 
ex 3826 00 10 
59 
—  50 %  or  more  but  not  more  than  58 %  of  C8-FAME, 
—  35 %  or  more  but  not  more  than  50 %  of  C10-FAME, 
— 
for the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or 
of  high  purity  methylester  of  C8  or  C10  fatty  acid (2 ) 
133
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6132 
ex 3901 10 10 
20 
High  flow  linear  low  density  polyethylene-1-butene  /  LLDPE  (CAS  RN  25087-34-7)  in 
0 % 
m3 
31.12.2024 
ex 3901 40 00 
10 
form  of  powder,  with: 
—  a melt flow rate (MFR 190  °C/2,16 kg) of 16g/10min or more, but not more than 24 
g/10  min,  and 
—  a  density  (ASTM  D  1505)  of  0,922  g/cm3  or  more,  but  not  more  than  0,926  g/cm3 , 
and 
—  a  vicat  softening  temperature  of  min.  94  °C 
0.5142 
ex 3901 10 90 
30 
Polyethylene  granules,  containing  by  weight  10 %  or  more  but  not  more  than  25 %  of 
0 % 
— 
31.12.2021 
copper 
▼M13 
0.6953 
ex 3901 40 00 
20 
Octene  linear  low-density  polyethylene  (LLDPE)  in  the  form  of  pellets  with: 
0 % 
m3 
31.12.2020 
—  10 %  or  more  but  not  more  than  20 %  by  weight  of  octene, 
—  a melt flow ratio of 9,0  or  more, but  not  more than  10,0  (using ASTM  D1238  10,0/ 
2,16), 
—  a  melt  index  (190  °C/2,16  kg)  of  0,4  g/10  min  or  more  but  not  more  than  0,6  g/10 
min, 
—  a  density  of  0,909  g/cm3  or  more,  but  not  more  than  0,913  g/cm3  using  ASTM 
02013R1387 
D4703, 
—  a  gel  area  per  24,6  cm3  of  not  more  than  20  mm2 ,  and 
—  an  anti-oxidant  level  of  not  more  than  240  ppm 
C3 
— 
EN — 
0.6897 
ex 3901 40 00 
30 
Octene  linear  low-density  polyethylene  (LLDPE)  produced  by  a  Ziegler-Natta  catalyst 
0 % 
m3 
31.12.2020 
method  in  the  form  of  pellets  with: 
—  more  than  10 %  but  not  more  than  20 %  by  weight  of  copolymer, 
01.07.2020 
—  a melt flow rate (MFR  190°C/2,16  kg) of 0,7  g / 10  min or more but not  more than 
0,9  g  /  10  min,  and 
—  a  density  (ASTM  D4703)  of  0,911  g/cm3  or  more,  but  not  more  than  0,913  g/cm3 , 
for  use  in  the  co-extrusion  processing  of  films  for  flexible  food  packaging (2 ) 
— 
013.001 
0.5092 
ex 3901 40 00 
40 
Block  copolymer  of  ethylene  with  octene  in  the  form  of  pellets: 
0 % 
— 
31.12.2020 
—  with  a  specific  gravity  of  0,862  or  more,  but  not  more  than  0,865, 
—  able  to  stretch  to  at  least  200 %  its  original  length, 
—  with  a  hysteresis  of  50 %  (±10 %), 
— 
—  with  permanent  deformation  of  not  more  than  20 %, 
134
for  use  in  the  manufacture  of  napkin  liners  for  babies (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6920 
ex 3901 90 80 
53 
Copolymer  of  ethylene  and  acrylic  acid  (CAS  RN  9010-77-9)  with: 
0 % 
m3 
31.12.2020 
—  an  acrylic  acid  content  of  18,5 %  or  more  but  not  more  than  49,5 %  by  weight 
(ASTM  D4094),  and 
—  a  melt  flow  rate  of  14g/10  min  (MFR  125  °C/2,16  kg,  ASTM  D1238)  or  more 
0.6734 
ex 3901 90 80 
55 
Zinc  or  sodium  salt  of  an  ethylene  and  acrylic  acid  copolymer,  with: 
0 % 
— 
31.12.2020 
—  an  acrylic  acid  content  of  6 %  or  more  but  not  more  than  50 %  by  weight,  and 
—  a  melt  flow  rate  of  1g/10  min  or  more  at  190  °C/2,16  kg  (measured  using  ASTM 
D1238) 
0.5049 
ex 3901 90 80 
67 
Copolymer made exclusively from ethylene and methacrylic acid monomers in which the 
0 % 
— 
31.12.2020 
methacrylic  acid  content  is  11 %  by  weight  or  more 
0.6731 
ex 3901 90 80 
70 
Ethylene  maleic  anhydride  copolymer,  whether  or  not  containing  another  olefin 
0 % 
— 
31.12.2020 
comonomer,  with  a  melt  flow  rate  of  1,3g/10  min  or  more  at  190  °C/2,16  kg 
(measured  using  ASTM  D1238) 
02013R1387 
0.6998 
ex 3901 90 80 
73 
Mixture  containing  by  weight: 
0 % 
— 
31.12.2021 
—  80 %  or  more,  but  not  more  than  94 %  of  chlorinated  polyethylene  (CAS  RN 
64754-90-1),  and 
—  6 %  or  more,  but  not  more  than  20 %  of  styrene-acrylic  copolymer  (CAS  RN 
27136-15-8) 
— 
EN — 
0.2902 
ex 3901 90 80 
91 
Ionomer  resin  consisting  of  a  salt  of  a  copolymer  of  ethylene  with  methacrylic  acid 
0 % 
— 
31.12.2023 
01.07.2020 
0.3906 
ex 3901 90 80 
92 
Chlorosulphonated  polyethylene 
0 % 
— 
31.12.2023 
— 
0.2899 
ex 3901 90 80 
93 
Copolymer of ethylene, vinyl acetate and carbon monoxide,  for use as a plasticiser in the 
0 % 
— 
31.12.2023 
manufacture  of  roof  sheets (2 ) 
013.001 
0.3186 
ex 3901 90 80 
94 
Mixtures  of  A-B  block  copolymer  of  polystyrene  and  ethylene-butylene  copolymer  and 
0 % 
— 
31.12.2023 
— 
A-B-A  block  copolymer  of  polystyrene,  ethylene-butylene  copolymer  and  polystyrene, 
135
containing  by  weight  not  more  than  35 %  of  styrene 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2898 
ex 3901 90 80 
97 
Chlorinated  polyethylene,  in  the  form  of  powder 
0 % 
— 
31.12.2023 
0.2895 
ex 3902 10 00 
20 
Polypropylene,  containing  no  plasticiser: 
0 % 
— 
31.12.2023 
—  of  a  melting  point  of  more  than  150  °C  (as  determined  by  the  ASTM  D  3417 
method), 
—  of  a  heat  of  fusion  of  15  J/g  or  more  but  not  more  than  70  J/g, 
—  of  an  elongation  at  break  of  1 000  %  or  more  (as  determined  by  the  ASTM  D  638 
method), 
—  of a tensile modulus  of 69  MPa or more but not more than 379  MPa (as determined 
by  the  ASTM  D  638  method) 
0.4591 
ex 3902 10 00 
40 
Polypropylene,  containing  no  plasticiser: 
0 % 
— 
31.12.2024 
—  of  a  tensile  strength:  of  32-77  MPa  (as  determined  by  the  ASTM  D638  method), 
—  of  a  flexural  strength  of  50-105  MPa  (as  determined  by  the  ASTM  D790  method), 
—  of a Melt Flow  Rate (MFR)  at 230  °C/ 2,16  kg  of 5-15  g/10  min  (as determined  by 
the  ASTM  D1238  method), 
—  with  40 %  or  more  but  not  more  than  80 %  by  weight  of  polypropylene, 
02013R1387 
—  with  10 %  or  more  but  not  more  than  30 %  by  weight  of  glass  fibre, 
—  with  10 %  or  more  but  not  more  than  30 %  by  weight  of  mica 
0.3180 
ex 3902 20 00 
10 
Polyisobutylene,  of  a  number  average  molecular  weight  (M 
0 % 
— 
31.12.2023 
— 
n)  of  700  or  more  but  not 
more  than  800 
EN — 
01.07.2020 
0.3179 
ex 3902 20 00 
20 
Hydrogenated  polyisobutene,  in  liquid  form 
0 % 
— 
31.12.2023 
0.3181 
ex 3902 30 00 
91 
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by 
0 % 
— 
31.12.2023 
— 
weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 
013.001 
0.5143 
ex 3902 30 00 
95 
A-B-A  block  copolymer,  consisting  of: 
0 % 
— 
31.12.2021 
— 
—  a  copolymer  of  propylene  and  ethylene,  and 
—  21 %  (±  3 %)  by  weight  of  polystyrene 
136
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5138 
ex 3902 30 00 
97 
Liquid  ethylene-propylene-copolymer  with: 
0 % 
— 
31.12.2021 
—  a  flashpoint  of  250  °C  or  more, 
—  a  viscosity  index  of  150  or  more, 
—  of  a  number  average  molecular  weight  (M n)  of  650  or  more 
0.4424 
ex 3902 90 90 
52 
Amorphous  poly-alpha-olefin  copolymer  blend  of  poly(propylene-co-1-butene)  and 
0 % 
— 
31.12.2023 
petroleum  hydrocarbon  resin 
0.4509 
ex 3902 90 90 
55 
Thermoplastic elastomer, with an  A-B-A block  copolymer  structure of polystyrene,  poly­
0 % 
— 
31.12.2023 
isobutylene  and  polystyrene  containing  by  weight 10 %  or  more but  not  more  than  35 % 
of  polystyrene 
0.4768 
ex 3902 90 90 
60 
Non-hydrogenated  100 %  aliphatic  resin  (polymer),  with  the  following  characteristics: 
0 % 
— 
31.12.2024 
—  liquid  at  room  temperature, 
—  obtained  by  cationic  polymerisation  of  C-5  alkenes  monomers, 
—  with  a  number  average  molecular  weight  (Mn)  of  370  (±  50), 
02013R1387 
—  with  a  weight  average  molecular  weight  (Mw)  of  500  (±  100) 
0.2900 
ex 3902 90 90 
92 
Polymers  of  4-methylpent-1-ene 
0 % 
— 
31.12.2023 
— 
EN — 
0.6214 
ex 3902 90 90 
94 
Chlorinated  polyolefins,  whether  or  not  in  a  solution  or  dispersion 
0 % 
— 
31.12.2023 
01.07.2020 
0.4040 
ex 3902 90 90 
98 
Synthetic  poly-alpha-olefin  with  a  viscosity  at  100°  Celsius  (measured  according  to 
0 % 
— 
31.12.2021 
method  ASTM  D  445)  ranging  from  3  centistokes  to  9  centistokes  and  obtained  by 
polymerization  of  a  mixture  of  dodecene  and  tetradecene,  containing  a  maximum  of 
40 %  of  tetradecene 
— 
013.001 
0.4166 
ex 3903 19 00 
40 
Crystalline  polystyrene  with: 
0 % 
— 
31.12.2021 
—  a  melting  point  of  268  °C  or  more  but  not  more  than  272  °C, 
— 
—  a  setting  point  of  232  °C  or  more  but  not  more  than  247  °C, 
—  whether  or  not  containing  additives  and  filling  material 
137
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5175 
ex 3903 90 90 
15 
Copolymer  in  the  form  of  granules  containing  by  weight: 
0 % 
— 
31.12.2023 
—  78  (±  4 %)  of  styrene, 
—  9  (±  2 %)  of  n-butyl  acrylate, 
—  11  (±  3 %)  of  n-butyl  methacrylate, 
—  1,5  (±0,7  %)  of  methacrylic  acid,  and 
—  0,01 %  or  more  but  not  more  than  2,5 %  of  polyolefinic  wax 
0.5176 
ex 3903 90 90 
20 
Copolymer  in  the  form  of  granules  containing  by  weight: 
0 % 
— 
31.12.2021 
—  83  ±  3 %  styrene, 
—  7  ±  2 %  n-butyl  acrylate, 
—  9  ±  2 %  n-butyl  methacrylate,  and 
—  0,01 %  or  more  but  not  more  than  1 %  of  polyolefinic  wax 
0.5168 
ex 3903 90 90 
25 
Copolymer  in  the  form  of  granules  containing  by  weight: 
0 % 
— 
31.12.2021 
—  82  ±  6 %  styrene, 
—  13,5  ±  3 %  n-butyl  acrylate, 
—  1  ±0,5  %  methacrylic  acid,  and 
—  0,01 %  or  more  but  not  more  than  8,5 %  of  polyolefinic  wax 
▼M13 
02013R1387 
0.7861 
ex 3903 90 90 
33 
Copolymer  of  styrene,  divinylbenzene  and  chloromethylstyrene  (CAS  RN  55844-94-5) 
0 % 
— 
31.12.2024 
with  a  purity  by  weight  of  99 %  or  more 
C3 
— 
EN — 
0.2891 
ex 3903 90 90 
35 
Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 o 
  C 
0 % 
— 
31.12.2023 
ex 3911 90 99 
43 
01.07.2020 
0.7417 
ex 3903 90 90 
38 
Polytetrafluoroethylene  (CAS  RN  9002-84-0)  encapsulated  with  an  acrylonitrile-styrene 
0 % 
— 
31.12.2022 
ex 3904 69 80 
88 
copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %) 
0.6565 
ex 3903 90 90 
45 
Preparation,  in  form  of  powder,  containing  by  weight: 
0 % 
m3 
31.12.2024 
— 
—  86 %  or  more  but  not  more  than  90 %  of  styrene-acrylic-copolymer,  and 
013.001 
—  9 %  or  more  but  not  more  than  11 %  of  fatty  acid  ethoxylate  (CAS  RN  9004-81-3) 
0.6780 
ex 3903 90 90 
46 
Copolymer  in  the  form  of  granules  containing  by  weight: 
0 % 
m3 
31.12.2020 
—  74 %  (±  4 %)  styrene, 
— 
—  24 %  (±  2 %)  n-butylacrylate,  and 
138
—  0,01 %  or  more  but  not  more  than  2 %  methacrylic  acid 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5473 
ex 3903 90 90 
60 
Copolymer  of  styrene  with  maleic  anhydride,  either  partially  esterified  or  completely 
0 % 
— 
31.12.2021 
ex 3911 90 99 
60 
chemically  modified,  of  an  average  molecular  weight  (M n)  of  not  more  than  4500,  in 
flake  or  powder  form 
0.6736 
ex 3903 90 90 
65 
Copolymer  of  styrene  with  2,  5-furandione  and  (1-methylethyl)benzene  in  the  form  of 
0 % 
— 
31.12.2020 
flakes  or  powder  (CAS  RN  26762-29-8) 
0.6804 
ex 3903 90 90 
70 
Copolymer  in  the  form  of  granules  containing  by  weight: 
0 % 
m3 
31.12.2020 
—  75 %  (±  7 %)  styrene,  and 
—  25 %  (±  7 %)  methylmethacrylate 
0.3910 
ex 3903 90 90 
80 
Granules of copolymer of styrene and divinylbenzene  of a minimum diameter of 150  μm 
0 % 
— 
31.12.2023 
and  a  maximum  diameter  of  800  μm  and  containing  by  weight: 
—  minimum  65 %  styrene, 
—  maximum  25 %  divinylbenzene, 
for  use  in  the  manufacture  of  ion  exchange  resins (2 ) 
02013R1387 
0.4410 
ex 3903 90 90 
86 
Mixture  containing  by  weight: 
0 % 
— 
31.12.2023 
—  45 %  or  more  but  not  more  than  65 %  of  polymers  of  styrene, 
—  35 %  or  more  but  not  more  than  45 %  of  poly(phenylene  ether), 
—  not  more  than  10 %  of  other  additives, 
and  with  one  or  more  of  the  following  special  colour  effects: 
— 
—  metallic  or  pearlescent  with  a  visual  angular  metamerism  caused  by  at  least  0,3 % 
EN — 
flake-based  pigment, 
—  fluorescent,  as  characterized  by  emitting  light  during  absorption  of  ultraviolet  radi­
ation, 
01.07.2020 
—  bright white, as characterized by  L* not less than 92  and b* not more than 2 and a* 
between  -5  and  7  on  the  CIELab  colour  scale 
— 
0.2887 
ex 3904 30 00 
30 
Copolymer  of  vinyl  chloride  with  vinyl  acetate  and  vinyl  alcohol,  containing  by  weight: 
0 % 
— 
31.12.2023 
ex 3904 40 00 
91 
—  87 %  or  more  but  not  more  than  92 %  of  vinyl  chloride, 
013.001 
—  2 %  or  more  but  not  more  than  9 %  of  vinyl  acetate,  and 
—  1 %  or  more  but  not  more  than  8 %  of  vinyl  alcohol, 
in one  of  the forms mentioned  in note  6  (a) or (b) to  Chapter 39,  for the  manufacture of 
— 
goods  of  headings  3215  or 8523  or for use in  the manufacture of coatings  for containers 
139
and  closures  of  a  kind  used  for  preserving  food  and  drink (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2885 
ex 3904 61 00 
20 
Copolymer  of  tetrafluoroethylene  and  trifluoro(heptafluoropropoxy)ethylene,  containing 
0 % 
— 
31.12.2023 
3,2 %  or  more  but  not  more  than  4,6 %  by  weight  of  trifluoro(heptafluoropro­
poxy)ethylene  and  less  than  1  mg/kg  of  extractable  fluoride  ions 
0.7675 
ex 3904 69 80 
20 
Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2) 
0 % 
— 
31.12.2023 
0.7626 
ex 3904 69 80 
30 
Copolymer  of  tetrafluoroethylene,  hexafluoropropene  and  ethene 
0 % 
— 
31.12.2023 
0.4981 
ex 3904 69 80 
81 
Poly(vinylidene  fluoride)  (CAS  RN  24937-79-9) 
0 % 
— 
31.12.2020 
0.5560 
ex 3904 69 80 
85 
Copolymer  of  ethylene  with  chlorotrifluoroethylene,  whether  or  not  modified  with 
0 % 
— 
31.12.2022 
hexafluoroisobutylene,  in  powder  form,  whether  or  not  with  fillers 
0.3285 
ex 3904 69 80 
94 
Copolymer  of  ethylene  and  tetrafluoroethylene 
0 % 
— 
31.12.2023 
02013R1387 
0.2883 
ex 3904 69 80 
96 
Polychlorotrifluoroethylene,  in  one  of  the  forms  mentioned  in  note  6  (a)  and  (b)  to 
0 % 
— 
31.12.2023 
Chapter  39 
— 
EN — 
0.3745 
ex 3904 69 80 
97 
Copolymer  of  chlorotrifluoroethylene  and  vinylidene  difluoride 
0 % 
— 
31.12.2024 
01.07.2020 
0.5786 
ex 3905 30 00 
10 
Viscous  preparation,  essentially  consisting  of  poly(vinyl  alcohol)  (CAS  RN  9002-89-5), 
0 % 
— 
31.12.2022 
an  organic  solvent  and  water  for  use  as  protective  coating  of  wafers  during  the  manu­
facturing  of  semiconductors (2 ) 
— 
013.001 
0.5774 
ex 3905 91 00 
40 
Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing 
0 % 
— 
31.12.2022 
by  weight  not  more  than  38 %  of  the  monomer  unit  ethylene 
— 
0.3283 
ex 3905 99 90 
95 
Hexadecylated  or  eicosylated  polyvinylpyrrolidone 
0 % 
— 
31.12.2023 
140
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2880 
ex 3905 99 90 
96 
Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a 
0 % 
— 
31.12.2023 
weight average molecular weight (M w) of 25 000 or more but not more than 150 000 and 
containing  by  weight: 
—  9,5 %  or  more  but  not  more  than  13 %  of  acetyl  groups  evaluated  as  vinyl  acetate, 
and 
—  5 %  or  more  but  not  more  than  6,5 %  of  hydroxy  groups  evaluated  as  vinyl  alcohol 
0.3282 
ex 3905 99 90 
97 
Povidone  (INN)-iodine  (CAS  RN  25655-41-8) 
0 % 
— 
31.12.2023 
0.3278 
ex 3905 99 90 
98 
Poly(vinyl  pyrrolidone)  partially  substituted  by  triacontyl  groups,  containing  by  weight 
0 % 
— 
31.12.2023 
78 %  or  more  but  not  more  than  82 %  of  triacontyl  groups 
0.3276 
3906 90 60 
Copolymer  of  methyl  acrylate  with  ethylene  and  a  monomer  containing  a  non-terminal 
0 % 
— 
31.12.2023 
carboxy  group  as  a  substituent,  containing  by  weight  50 %  or  more  of  methyl  acrylate, 
whether  or  not  mixed  with  silicon  dioxide 
02013R1387 
0.3279 
ex 3906 90 90 
10 
Polymerization  product  of  acrylic  acid  with  small  quantities  of  a  polyunsaturated 
0 % 
— 
31.12.2023 
monomer,  for  the  manufacture  of  medicaments  of  heading  3003  or  3004 (2 ) 
— 
0.7347 
ex 3906 90 90 
23 
Copolymer  of  methylmethacrylate,  butylacrylate,  glycidylmethacrylate  and  styrene 
0 % 
— 
31.12.2022 
(CAS  RN  37953-21-2),  with  an  epoxy  equivalent  weight  of  not  more  than  500,  in 
EN — 
form  of  ground  flakes  with  a  particle  size  of  not  more  than  1  cm 
01.07.2020 
0.5814 
ex 3906 90 90 
27 
Copolymer  of  stearyl  methacrylate,  isooctyl  acrylate  and  acrylic  acid,  dissolved  in 
0 % 
— 
31.12.2022 
isopropyl  palmitate 
— 
0.6672 
ex 3906 90 90 
33 
Core  shell  copolymer  of  butyl  acrylate  and  alkyl  methacrylate,  with  a  particle  size  of  5 
0 % 
— 
31.12.2020 
013.001 
μm  or  more  but  not  more  than  10  μm 
— 
0.6663 
ex 3906 90 90 
37 
Copolymer  of  trimethylolpropane  trimethacrylate  and  methyl  methacrylate  (CAS  RN 
0 % 
— 
31.12.2020 
28931-67-1),  in  microsphere  form  with  an  average  diameter  of  3  μm 
141
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4908 
ex 3906 90 90 
40 
Transparent  acrylic  polymer  in  packages  of  not  more  than  1  kg,  and  not  for  retail  sale 
0 % 
— 
31.12.2020 
with: 
—  a viscosity of not more than 50000  Pa·s at 120  °C  as determined by  the test method 
ASTM  D  3835, 
—  a  weight  average  molecular  weight  (M w)  of  more  than  500 000  but  not  more  than 
1 200 000  according  to  the  Gel  Permeation  Chromatography  (GPC)  test, 
—  a  residual  monomer  content  of  less  than  1 % 
0.4667 
ex 3906 90 90 
41 
Poly(alkyl  acrylate)  with  an  ester  alkyl  chain  of  C10  to  C30 
0 % 
— 
31.12.2024 
0.7125 
ex 3906 90 90 
43 
Copolymer  of  methacrylic  esters,  butylacrylate  and  cyclic  dimethylsiloxanes  (CAS  RN 
0 % 
— 
31.12.2021 
143106-82-5) 
0.2886 
ex 3906 90 90 
50 
Polymers  of  esters  of  acrylic  acid  with  one  or  more  of  the  following  monomers  in  the 
0 % 
— 
31.12.2023 
chain: 
02013R1387 
—  chloromethyl  vinyl  ether, 
—  chloroethyl  vinyl  ether, 
—  chloromethylstyrene, 
—  vinyl  chloroacetate, 
—  methacrylic  acid, 
—  butenedioic  acid  monobutyl  ester, 
— 
—  butenedioic  acid  monocyclohexyl  ester, 
EN — 
containing  by  weight  not  more  than  5 %  of  each  monomer  unit 
01.07.2020 
0.7131 
ex 3906 90 90 
53 
Polyacrylamide  powder  having  an  average  particle  size  of  less  than  2  microns  and  a 
0 % 
— 
31.12.2021 
melting  point  of  more  than  260°C,  containing  by  weight: 
—  75 %  or  more  but  not  more  than  85 %  of  polyacrylamide,  and 
—  15 %  or  more  but  not  more  than  25 %  of  polyethylene  glycol 
— 
013.001 
0.7499 
ex 3906 90 90 
60 
Aqueous  dispersion  containing  by  weight: 
0 % 
— 
31.12.2023 
—  more  than  10 %  but  not  more  than  15 %  of  ethanol,  and 
— 
—  more than  7 %  but  not  more  than  11 %  of  a  reaction product  of  poly(epoxyalkylme­
thacrylate-co-divinylbenzene)  with  a  glycerol  derivative 
142
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6425 
ex 3906 90 90 
73 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2024 
—  33 %  or  more  but  not  more  than  37 %  of  butyl  methacrylate  -  methacrylic  acid 
copolymer, 
—  24 %  or  more  but  not  more  than  28 %  of  propylene  glycol,  and 
—  37 %  or  more  but  not  more  than  41 %  of  water 
0.6890 
ex 3907 10 00 
10 
Mixture  of  a  trioxan-oxirane-copolymer  and  polytetrafluoroethylene 
0 % 
— 
31.12.2020 
0.6891 
ex 3907 10 00 
20 
Polyoxymethylene  with  acetyl  endcaps,  containing  polydimethylsiloxane  and  fibers  of  a 
0 % 
— 
31.12.2020 
copolymer  of  terephthalic  acid  and  1,4-phenyldiamine 
0.3272 
ex 3907 20 11 
10 
Poly(ethylene  oxide)  of  a  number  average  molecular  weight  (M n)  of  100 000  or  more 
0 % 
— 
31.12.2023 
0.4378 
ex 3907 20 11 
20 
Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide,  chemically  modified  with 
0 % 
— 
31.12.2023 
lysine,  of  a  number  average  molecular  weight  (M n)  of  40 000 
02013R1387 
0.5379 
ex 3907 20 11 
60 
Preparation  containing: 
0 % 
— 
31.12.2021 
—  α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- 
ω-hydroxypoly(oxy-1,2-ethanediyl)  (CAS  RN  104810-48-2),  and 
—  α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- 
ω-[3-[3-(2H-benzotriazol-2-yl)-5- (1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopro­
— 
poxy]poly(oxy-1,2-ethanediyl)  (CAS  RN  104810-47-1) 
EN — 
0.5862 
ex 3907 20 20 
20 
Polytetramethylene  ether  glycol  with  a  weight  average  molecular  weight  (Mw)  of  2 700 
0 % 
— 
31.12.2022 
01.07.2020 
or  more  but  not  more  than  3 100  (CAS  RN  25190-06-1) 
0.7099 
ex 3907 20 20 
25 
Copolymer  of  propylene  oxide  and  butylene  oxide,  monododecylether,  containing  by 
0 % 
— 
31.12.2021 
weight: 
— 
—  48 %  or  more  but  not  more  than  52 %  of  propylene  oxide,  and 
013.001 
—  48 %  or  more  but  not  more  than  52 %  of  butylene  oxide 
0.2876 
ex 3907 20 20 
30 
Mixture,  containing  by  weight  70 %  or  more  but  not  more  than  80 %  of  a  polymer  of 
0 % 
— 
31.12.2023 
— 
glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer 
143
of  dibutyl  maleate  and  N-vinyl-2-pyrrolidone 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7532 
ex 3907 20 20 
35 
Mixture  containing  by  weight: 
0 % 
— 
31.12.2023 
—  5 %  or  more  but  not  more  than  15 %  of  a  copolymer  of  glycerol,  propylene  oxide 
and  ethylene  oxide  (CAS  RN  9082-00-2),  and 
—  85 %  or  more  but  not  more  than  95 %  of  a  copolymer  of  sucrose,  propylene  oxide 
and  ethylene  oxide  (CAS  RN  26301-10-0) 
0.4013 
ex 3907 20 20 
40 
Copolymer  of  tetrahydrofuran  and  tetrahydro-3-methylfuran  with  a  number  average 
0 % 
— 
31.12.2023 
molecular  weight  (Mn)  of  900  or  more  but  not  more  than  3 600 
0.6351 
ex 3907 20 20 
50 
Poly(p-phenylene  oxide)  in  the  form  of  powder 
0 % 
— 
31.12.2024 
ex 3907 20 99 
75 
—  with  a  glasstransitiontemperature  of  210  °C, 
—  with  a  weight  average  molecular weight  (Mw)  of  35 000  or  more  but  not  more  than 
80 000, 
—  with  an  inherent  viscosity  of  0,2  or  more  but  not  more  than  0,6  dl/gram 
0.7308 
ex 3907 20 20 
60 
Polypropylene  glycol monobutyl  ether (CAS RN  9003-13-8)  of an alkalinity of not more 
0 % 
— 
31.12.2022 
than  1  ppm  of  sodium 
02013R1387 
0.3271 
ex 3907 20 99 
15 
Poly(oxypropylene)  having  alkoxysilyl  end-groups 
0 % 
— 
31.12.2023 
0.7478 
ex 3907 20 99 
20 
2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy 
0 % 
— 
31.12.2023 
— 
propane  (CAS  RN  697278-30-1)  with  a  number  average  molecular  weight  (Mn)  of  at 
EN — 
least 20  kDa  whether  or  not  modified  with  a  chemical entity  enabling  a  linkage  between 
the  PEG  and  a  protein  or  a  peptide 
01.07.2020 
0.2920 
ex 3907 20 99 
30 
Homopolymer  of  1-chloro-2,3-epoxypropane  (epichlorohydrin) 
0 % 
— 
31.12.2023 
— 
0.7484 
ex 3907 20 99 
40 
N-(methoxypoly  (ethylene  glycol)  -N-(1-acetyl-  (2-methoxypoly  (ethylene  glycol)) 
0 % 
— 
31.12.2023 
-glycine  (CAS  RN  600169-00-4)  with  a  number  average  molecular  weight  (Mn)  for 
013.001 
polyethylene  glycol  of  40  kDa 
— 
0.3269 
ex 3907 20 99 
45 
Copolymer  of  ethylene  oxide  and  propylene  oxide,  having  aminopropyl  and  methoxy 
0 % 
— 
31.12.2023 
144
end-groups 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4536 
ex 3907 20 99 
50 
Vinyl-silyl  terminated  perfluoropolyether  polymer  or  an  assortment  of  two  components 
0 % 
— 
31.12.2023 
consisting  of  the  same  type  of  vinyl-silyl  terminated  perfluoropolyether  polymer  as  the 
main  ingredient 
0.4546 
ex 3907 20 99 
55 
Succinimidyl  ester of  methoxy  poly(ethylene  glycol)propionic  acid,  of  a  number  average 
0 % 
— 
31.12.2023 
molecular  weight  (Mn)  of  5 000 
0.5144 
ex 3907 20 99 
60 
Polytetramethylene  oxide  di-p-aminobenzoate 
0 % 
— 
31.12.2021 
0.6839 
ex 3907 30 00 
15 
Epoxide  resin,  halogen-free: 
0 % 
— 
31.12.2020 
—  containing  by  weight  more  than  2 %  phosphoros  calculated  on  the  solid  content, 
chemically  bound  in  the  epoxide  resin, 
—  not  containing  any  hydrolysable  chloride  or  containing  less  than  300  ppm  hydro­
lysable  chloride,  and 
02013R1387 
—  containing  solvents, 
for use in the manufacture of prepreg sheets or rolls of a kind used  for the production  of 
printed  circuits (2 ) 
— 
EN — 
0.6840 
ex 3907 30 00 
25 
Epoxide  resin: 
0 % 
— 
31.12.2020 
—  containing  by  weight  21 %  or  more  of  brome, 
—  not  containing  any  hydrolysable  chloride  or  containing  less  than  500  ppm  hydro­
01.07.2020 
lysable  chloride,  and 
—  containing  solvents 
— 
0.2759 
ex 3907 30 00 
40 
Epoxide  resin,  containing  by  weight  70 %  or  more  of  silicon  dioxide,  for  the  encapsu­
0 % 
— 
31.12.2023 
013.001 
ex 3926 90 97 
70 
lation  of  goods  of  headings  8533,  8535,  8536,  8541,  8542  or  8548 (2 ) 
— 
0.5578 
ex 3907 30 00 
60 
Polyglycerol  polyglycidyl  ether  resin  (CAS  RN  118549-88-5) 
0 % 
— 
31.12.2022 
145
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7427 
ex 3907 30 00 
70 
Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35- 
0 % 
— 
31.12.2022 
4)  containing  by  weight: 
—  65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and 
—  none  or  not  more  than  0,5 %  of  carbon  black  (CAS  RN  1333-86-4) 
0.2541 
ex 3907 40 00 
35 
α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene)  isopropylidene(3,5- 
0 % 
— 
31.12.2023 
dibromo-1,4-phenylene)oxycarbonyl]  (CAS  RN  94334-64-2) 
0.2564 
ex 3907 40 00 
45 
α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-pheny­
0 % 
— 
31.12.2023 
lene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3) 
0.6352 
ex 3907 40 00 
70 
Polycarbonate  of  phosgene  and  bisphenol  A: 
0 % 
— 
31.12.2024 
—  containing  by  weight  12 %  or  more  but  not  more  than  26 %  of  a  copolymer  of 
isophthaloyl  chloride,  terephthaloyl  chloride  and  resorcinol, 
—  with  p-cumylphenol  endcaps,  and 
—  with  a  weight  average  molecular weight  (Mw)  of  29 900  or  more  but  not  more  than 
02013R1387 
31 900 
0.6355 
ex 3907 40 00 
80 
Polycarbonate  of  carbonic  dichloride,  4,4'-(1-methylethylidene)bis[2,6-dibromophenol] 
0 % 
— 
31.12.2024 
and  4,4'-(1-methylethylidene)bis[phenol]  with  4-(1-methyl-1-phenylethyl)phenol  endcaps 
— 
EN — 
0.3263 
ex 3907 69 00 
10 
Copolymer  of terephthalic acid and  isophthalic acid with ethylene glycol,  butane-1,4-diol 
0 % 
— 
31.12.2023 
and  hexane-1,6-diol 
01.07.2020 
0.5160 
ex 3907 69 00 
40 
Poly(ethylene  terephthalate)  pellets  or  granules: 
0 % 
m3 
31.12.2021 
—  with  a  specific  gravity  of  1,23  or  more  but  not  more  than  1,27  at  23  °C,  and 
—  containing  not  more  than  10 %  by  weight  of  other  modifiers  or  additives 
— 
013.001 
0.2980 
3907 70 00 
Poly(lactic  acid) 
0 % 
— 
31.12.2023 
— 
0.2918 
ex 3907 91 90 
10 
Diallyl  phthalate  prepolymer,  in  powder  form 
0 % 
— 
31.12.2024 
146
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2977 
ex 3907 99 80 
10 
Poly(oxy-1,4-phenylenecarbonyl)  (CAS  RN  26099-71-8),  in  the  form  of  powder 
0 % 
— 
31.12.2023 
0.5639 
ex 3907 99 80 
25 
Copolymer,  containing  72 %  by  weight  or  more  of  terephthalic  acid  and/or  isomers 
0 % 
— 
31.12.2022 
thereof  and  cyclohexanedimethanol 
0.4940 
ex 3907 99 80 
30 
Poly(hydroxyalkanoate),  predominantly  consisting  of  poly(3-hydroxybutyrate) 
0 % 
— 
31.12.2020 
ex 3913 90 00 
20 
0.7491 
ex 3907 99 80 
35 
Copolymer  in  form  of  a  clear,  pale  yellow  liquid,  consisting  of: 
0 % 
— 
31.12.2023 
—  phthalic  acid  isomers  and/or  aliphatic  dicarboxylic  acids, 
—  aliphatic  diols,  and 
—  fatty  acid  end-caps, 
with: 
—  a  hydroxyl  number  of  120  mg  KOH  or  more  but  not  more  than  350  mg  KOH, 
—  a  viscosity  at  25  °C  of  2000  cPs  or  more  but  not  more  than  8000  cPs,  and 
—  an  acid  value  less  than  10  mg  KOH/g 
02013R1387 
0.4795 
ex 3907 99 80 
70 
Copolymer  of  poly(ethylene  terephthalate) and  cyclohexane  dimethanol,  containing  more 
3,5 % 
— 
31.12.2024 
than  10 %  by  weight  of  cyclohexane  dimethanol 
— 
0.5057 
ex 3907 99 80 
80 
Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives 
0 % 
— 
31.12.2020 
EN — 
thereof  and  cyclohexanedimethanol,  completed  with  linear  and/  or  cyclic  dioles 
01.07.2020 
0.2923 
ex 3908 90 00 
10 
Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl),  in  one  of  the  forms 
0 % 
— 
31.12.2023 
mentioned  in  note  6  (b)  to  Chapter  39 
— 
0.3261 
ex 3908 90 00 
30 
Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic 
0 % 
— 
31.12.2023 
013.001 
polyetherdiamine 
— 
0.6639 
ex 3908 90 00 
55 
1,4-Benzenedicarboxylic  acid  polymer  with  2-methyl-1,8-octanediamine  and  1,9- 
0 % 
— 
31.12.2020 
nonanediamine  (CAS  RN  169284-22-4) 
147
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7428 
ex 3909 20 00 
10 
Polymer  mixture,  containing  by  weight: 
0 % 
— 
31.12.2022 
—  60 %  or  more  but  not  more  than  75 %  of  melamine  resin  (CAS  RN  9003-08-1), 
—  15 %  or  more  but  not  more  than  25 %  of  silicon  dioxide  (CAS  RN  14808-60-7  or 
60676-86-0), 
—  5 %  or  more  but  not  more  than  15 %  of  cellulose  (CAS  RN  9004-34-6),  and 
—  1 %  or  more  but  not  more  than  15 %  of  phenolic  resin  (CAS  RN  25917-04-8) 
0.5032 
ex 3909 40 00 
20 
Powder  of  thermosetting  resin  in  which  magnetic  particles  have  been  evenly  distributed, 
0 % 
— 
31.12.2020 
for  use  in  the  manufacture  of  ink  for  photocopiers,  fax  machines,  printers  and  multi­
function  devices (2 ) 
▼M13 
0.7865 
ex 3909 40 00 
70 
Polymer  in  the  form  of  flakes  composed  of  98 %  or  more  by  weight  of  phenolic  resin 
0 % 
— 
31.12.2024 
(brominated  octylphenol-formaldehyde)  with  a  softening  point  of  80  °C  or  more  but  not 
more  than  95  °C  according  to  standard  ASTM  E28-92  (CAS  RN  112484-41-0) 
C3 
0.4595 
ex 3909 50 90 
10 
UV  curable  water  soluble  liquid  photopolymer  consisting  of  a  mixture  by  weight  of: 
0 % 
— 
31.12.2024 
02013R1387 
—  60 %  or  more  of  two-functional  acrylated  polyurethane  oligomers,  and 
—  30 %  (±  8 %)  of  mono-functional  and  tri-functional  (metha)  acrylates,  and 
—  10 %  (±  3 %)  of  hydroxyl  functionalized  mono-functional  (metha)  acrylates 
0.6423 
ex 3909 50 90 
20 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2024 
— 
—  14 %  or  more  but  not  more  than  18 %  of  ethoxylated  polyurethane  modified  with 
hydrophobic  groups, 
EN — 
—  3 %  or  more  but  not  more  than  5 %  of  enzymatically  modified  starch,  and 
—  77 %  or  more  but  not  more  than  83 %  of  water 
01.07.2020 
0.6420 
ex 3909 50 90 
30 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2024 
—  16 %  or  more  but  not  more  than  20 %  of  ethoxylated  polyurethane  modified  with 
hydrophobic  groups, 
—  19 %  or  more  but  not  more  than  23 %  of  diethylene  glycol  butyl  ether,  and 
— 
—  60 %  or  more  but  not  more  than  64 %  of  water 
013.001 
0.6424 
ex 3909 50 90 
40 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2024 
—  34 %  or  more  but  not  more  than  36 %  of  ethoxylated  polyurethane  modified  with 
hydrophobic  groups, 
— 
—  37 %  or  more  but  not  more  than  39 %  of  propylene  glycol,  and 
148
—  26 %  or  more  but  not  more  than  28 %  of  water 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6921 
ex 3910 00 00 
15 
Dimethyl,  methyl(propyl(polypropylene  oxide))  siloxane  (CAS  RN  68957-00-6), 
0 % 
— 
31.12.2020 
trimethylsiloxy-terminated 
0.3260 
ex 3910 00 00 
20 
Block  copolymer  of  poly(methyl-3,3,3-trifluoropropylsiloxane)  and  poly[methyl(vinyl)sil­
0 % 
— 
31.12.2023 
oxane] 
0.7057 
ex 3910 00 00 
25 
Preparations  containing  by  weight: 
0 % 
— 
31.12.2021 
—  10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] 
propoxy]  propyl-2-methyl-2-propenoate  (CAS  RN  69861-02-5),  and 
—  10 % 
or 
more, 
α-Butyldimethylsilyl- 
ω 
-3-[(2-methyl-1-oxo-2-propen-1- 
yl)oxy]propyl-terminated  silicone  polymer  (CAS  RN  146632-07-7) 
0.7058 
ex 3910 00 00 
35 
Preparations  containing  by  weight: 
0 % 
— 
31.12.2021 
—  30 %  or  more,  α-Butyldimethylsilyl-ω-(3-methacryloxy-2-hydroxypropyloxy)pro­
pyldimethylsilyl-polydimethylsiloxane  (CAS  RN  662148-59-6),  and 
—  10 %  or  more,  N,N  –  Dimethylacrylamide  (CAS  RN  2680-03-7) 
02013R1387 
0.4049 
ex 3910 00 00 
40 
Silicones  of  a  kind  used  in  the  manufacture  of  long  term  surgical  implants 
0 % 
— 
31.12.2021 
— 
0.7217 
ex 3910 00 00 
45 
Dimethyl  Siloxane,  hydroxy-terminated  polymer  with  a  viscosity  of  38-45  mPa·s  (CAS 
0 % 
— 
31.12.2021 
EN — 
RN  70131-67-8) 
01.07.2020 
0.4300 
ex 3910 00 00 
50 
Silicone based  pressure sensitive adhesive  in solvent containing copoly(dimethylsiloxane/ 
0 % 
— 
31.12.2022 
diphenylsiloxane)  gum 
0.7218 
ex 3910 00 00 
55 
Preparation  containing  by  weight: 
0 % 
— 
31.12.2021 
— 
—  55 %  or  more  but  not  more  than  65 %  of  vinyl  terminated  polydimethylsiloxane 
013.001 
(CAS  RN  68083-19-2), 
—  30 %  or  more  but  not  more  than  40 %  of  dimethylvinylated  and  trimethylated  silica 
(CAS  RN  68988-89-6),  and 
— 
—  1 %  or  more  but  not  more  than  5 %  of  silicic  acid,  sodium  salt,  reaction  products 
with  chlorotrimethylsilane  and  isopropyl  alcohol  (CAS  RN  68988-56-7) 
149
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4845 
ex 3910 00 00 
60 
Polydimethylsiloxane,  whether or not polyethylene  glycol and  trifluoropropyl substituted, 
0 % 
— 
31.12.2024 
with  methacrylate  end  groups 
0.5926 
ex 3910 00 00 
70 
Passivating  silicon coating in primary form, to protect edges and prevent short circuits in 
0 % 
— 
31.12.2023 
semiconductor  devices 
0.6324 
ex 3910 00 00 
80 
Monomethacryloxypropylterminated  poly(dimethylsiloxane) 
0 % 
— 
31.12.2024 
0.4413 
ex 3911 10 00 
81 
Non-hydrogenated  hydrocarbon  resin,  obtained  by  polymerization  of  more  than  75 %  by 
0 % 
— 
31.12.2023 
weight  C-5  to  C-12  cycloaliphatic  alkenes  and  more  than  10 %  but  not  more  than  25 % 
by  weight  aromatic  alkenes  yielding  a  hydrocarbon  resin  with: 
—  an  iodine  value  of  more  than  120,  and 
—  a  Gardner  Colour  of  more  than  10  for  the  pure  product,  or 
—  a  Gardner  Colour  of  more  than  8  for  a  50 %  solution  by  weight  in  toluene  (as 
determined  by  the  ASTM  method  D6166) 
02013R1387 
0.7163 
ex 3911 90 19 
20 
Set  of  two  components,  in  a  volume  ratio  of  1:1,  intended  to  produce  a  thermosetting 
0 % 
— 
31.12.2023 
polydicyclopentadiene  after  mixing,  both  components  containing: 
—  83 %  or  more  by  weight  of  3a,4,7,7a-tetrahydro-4,7-methanoindene  (dicyclopenta­
diene), 
—  a  synthetic  rubber, 
— 
—  whether  or  not  containing  by  weight  7 %  or  more  of  tricyclopentadiene, 
EN — 
and  each  separate  component  containing: 
—  either  an  aluminium-alkyl  compound,  or 
—  an  organic  complex  of  tungsten,  or 
01.07.2020 
—  an  organic  complex  of  molybdenum 
0.4280 
ex 3911 90 19 
30 
Copolymer  of  ethyleneimine  and  ethyleneimine  dithiocarbamate,  in  an  aqueous  solution 
0 % 
— 
31.12.2022 
of  sodium  hydroxide 
— 
013.001 
0.5145 
ex 3911 90 19 
40 
m-Xylene  formaldehyde  resin 
0 % 
— 
31.12.2021 
— 
0.6422 
ex 3911 90 19 
50 
Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form 
0 % 
— 
31.12.2024 
150
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6519 
ex 3911 90 19 
70 
Preparation,  containing: 
0 % 
— 
31.12.2024 
—  Cyanic  acid,  C,C'-((1-methylethylidene)di-4,1-phenylene)  ester,  homopolymer  (CAS 
RN  25722-66-1), 
—  1,3-Bis(4-cyanophenyl)propane  (CAS  RN  1156-51-0), 
—  in  a  solution  of  butanone  (CAS  RN  78-93-3)  with  a  content  of  less  than  50 %  by 
weight 
0.3257 
ex 3911 90 99 
25 
Copolymer  of  vinyltoluene  and  α-methylstyrene 
0 % 
— 
31.12.2023 
0.5053 
ex 3911 90 99 
30 
1,4:5,8-Dimethanonaphthalene,  2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,  polymer  with 
0 % 
— 
31.12.2020 
3a,4,7,7a-tetrahydro-4,7-methano-1H-indene,  hydrogenated 
0.5109 
ex 3911 90 99 
35 
Alternated  copolymer  of  ethylene  and  maleic  anhydride  (EMA) 
0 % 
— 
31.12.2020 
0.3221 
ex 3911 90 99 
40 
Mixed  calcium  and  sodium  salt  of  a  copolymer  of  maleic  acid  and  methyl  vinyl  ether, 
0 % 
— 
31.12.2023 
having  a  calcium  content  of  9 %  or  more  but  not  more  than  16 %  by  weight 
02013R1387 
0.3256 
ex 3911 90 99 
45 
Copolymer  of  maleic  acid  and  methyl  vinyl  ether 
0 % 
— 
31.12.2023 
0.5729 
ex 3911 90 99 
53 
Hydrogenated  polymer  of  1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene  with 
0 % 
— 
31.12.2022 
— 
3a,4,7,7a-tetrahydro-4,7-methano-1H-indene  and  4,4a,9,9a-tetrahydro-1,4-methano-1H- 
EN — 
fluorene  (CAS  RN  503442-46-4) 
01.07.2020 
0.5730 
ex 3911 90 99 
57 
Hydrogenated  polymer  of  1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene  with 
0 % 
— 
31.12.2022 
4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene  (CAS  RN  503298-02-0) 
— 
0.3255 
ex 3911 90 99 
65 
Calcium  zinc  salt  of  a  copolymer  of  maleic  acid  and  methyl  vinyl  ether 
0 % 
— 
31.12.2023 
013.001 
0.4091 
ex 3911 90 99 
86 
Copolymer  of  methyl  vinyl  ether  and  maleic  acid  anhydride  (CAS  RN  9011-16-9) 
0 % 
— 
31.12.2021 
— 
151
0.4912 
ex 3912 11 00 
30 
Cellulose  triacetate  (CAS  RN  9012-09-3) 
0 % 
— 
31.12.2021 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4953 
ex 3912 11 00 
40 
Cellulose  diacetate  powder 
0 % 
— 
31.12.2020 
0.3251 
ex 3912 39 85 
10 
Ethylcellulose,  not  plasticized 
0 % 
— 
31.12.2023 
0.3253 
ex 3912 39 85 
20 
Ethylcellulose,  in  the  form  of  an  aqueous  dispersion  containing  hexadecan-1-ol  and 
0 % 
— 
31.12.2023 
sodium  dodecyl  sulphate,  containing  by  weight  27  (±  3)  %  of  ethylcellulose 
0.3252 
ex 3912 39 85 
30 
Cellulose,  both  hydroxyethylated  and  alkylated  with  alkyl  chain-lengths  of  3  or  more 
0 % 
— 
31.12.2023 
carbon  atoms 
0.5172 
ex 3912 39 85 
40 
Hypromellose  (INN)  (CAS  RN  9004-65-3) 
0 % 
— 
31.12.2021 
0.6718 
ex 3912 39 85 
50 
Polyquaternium  10  (CAS  RN  68610-92-4) 
0 % 
— 
31.12.2020 
02013R1387 
0.4017 
ex 3912 90 10 
20 
Hydroxypropyl  methylcellulose  phthalate 
0 % 
— 
31.12.2023 
0.3898 
ex 3913 90 00 
30 
Protein,  chemically  or  enzymatically  modified  by  carboxylation  and/or  phthalic  acid 
0 % 
— 
31.12.2023 
addition,  whether  or  not  hydrolysed,  having  a  weight  average  molecular  weight  (Mw) 
— 
of  less  than  350 000 
EN — 
0.3749 
ex 3913 90 00 
85 
Sterile  sodium  hyaluronate  (CAS  RN  9067-32-7) 
0 % 
— 
31.12.2023 
01.07.2020 
0.3249 
ex 3913 90 00 
95 
Chondroitinsulphuric  acid,  sodium  salt  (CAS  RN  9082-07-9) 
0 % 
— 
31.12.2023 
— 
0.4797 
ex 3916 20 00 
91 
Profiles  of  poly(vinyl  chloride)  of  a  kind  used  in  the  manufacture  of  sheet  pilings  and 
0 % 
— 
31.12.2024 
013.001 
facings,  containing  the  following  additives: 
—  titanium  dioxide, 
—  poly(methyl  methacrylate), 
— 
—  calcium  carbonate, 
152
—  binding  agents 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5988 
ex 3916 90 10 
10 
Rods  with  cellular  structure,  containing  by  weight: 
0 % 
— 
31.12.2023 
—  polyamide-6  or  poly(epoxy  anhydride), 
—  7 %  or  more  but  not  more  than  9 %  of  polytetrafluorethylene,  if  present, 
—  10 %  or  more  but  not  more  than  25 %  of  inorganic  fillers 
0.4641 
ex 3917 40 00 
91 
Plastic  connectors  containing  O-rings,  a  retainer  clip  and  a  release  system  for  insertion 
0 % 
— 
31.12.2024 
into  car  fuel  hoses 
0.2421 
ex 3919 10 19 
10 
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints 
0 % 
— 
31.12.2023 
ex 3919 10 80 
25 
against counterfeiting, alteration or substitution of data or duplication, or an official mark 
ex 3919 90 80 
31 
for an intended use, and  embedded  glass beads and, on  the other side, an adhesive layer, 
covered  on  one  side  or  on  both  sides  with  a  release  film 
0.4800 
ex 3919 10 80 
27 
Polyester  film: 
0 % 
— 
31.12.2024 
02013R1387 
ex 3919 90 80 
20 
—  coated  on  one  side  with  an  acrylic  thermal  release  adhesive  that  debonds  at 
temperatures of 90  °C  or more but not more than 200  °C,  and  a polyester liner, and 
—  on  the  other  side  not  coated  or  coated  with  an  acrylic  pressure sensitive  adhesive  or 
with  an  acrylic  thermal  release  adhesive  that  debonds  at  temperatures  of  90  °C  or 
more  but  not  more  than  200  °C,  and  a  polyester  liner 
— 
EN — 
0.2910 
ex 3919 10 80 
35 
Reflecting  film,  consisting  of  a  layer  of  poly(vinyl  chloride),  a  layer  of  alkyd  polyester, 
0 % 
— 
31.12.2023 
01.07.2020 
with,  on  one  side,  security  imprints  against  counterfeiting,  alteration  or  substitution  of 
data  or  duplication,  or  an  official  mark  for  an  intended  use,  only  visible  by  means  of  a 
retroreflecting  lighting,  and  embedded  glass  beads  and,  on  the  other  side,  an  adhesive 
layer,  covered  on  one  side  or  on  both  sides  with  a  release  film 
— 
013.001 
0.4757 
ex 3919 10 80 
37 
Polytetrafluoroethylene  film: 
0 % 
— 
31.12.2020 
—  with  a  thickness  of  100  μm  or  more, 
—  an  elongation  at  break  of  not  more  than  100 %, 
— 
—  coated  on  one  side  with  a  pressure  sensitive  silicon  adhesive 
153
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4093 
ex 3919 10 80 
40 
Black  poly(vinyl  chloride)  film: 
0 % 
— 
31.12.2022 
ex 3919 90 80 
43 
—  with  a  gloss  of  more  than  30  degrees  according  to  ASTM  D2457, 
—  whether or not covered on one side with a protective poly(ethyleneterephthalate) film, 
and  on  the  other  side  with  a  pressure  sensitive  adhesive  with  channels  and  a  release 
liner 
0.4761 
ex 3919 10 80 
43 
Ethylene  vinyl  acetate  film: 
0 % 
— 
31.12.2020 
ex 3919 90 80 
26 
—  of  a  thickness  of  100  μm  or  more, 
—  coated on  one  side with an acrylic pressure sensitive or UV-sensitive adhesive and  a 
polyester  or  polypropylene  liner 
0.4303 
ex 3919 10 80 
45 
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled 
0 % 
— 
31.12.2022 
ex 3919 90 80 
45 
pressure sensitive adhesive and  on  one  side a liner, with an application thickness of 0,38 
mm  or  more  but  not  more  than  1,53  mm 
02013R1387 
0.3035 
ex 3919 10 80 
50 
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of 
0 % 
— 
31.12.2023 
ex 3919 90 80 
41 
a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm 
ex 3920 10 89 
25 
or  more,  for  use  in  the  grinding  and/or  dicing  process  of  silicon  discs (2 ) 
— 
EN — 
0.3036 
ex 3919 10 80 
55 
Acrylic  foam  tape,  covered  on  one  side  with  a  heat  activatable  adhesive  or  an  acrylic 
0 % 
— 
31.12.2022 
01.07.2020 
ex 3919 90 80 
53 
pressure  sensitive  adhesive  and  on  the  other  side  with  an  acrylic  pressure  sensitive 
adhesive  and  a  release  sheet,  of  a  peel  adhesion  at  an  angle  of  90 o 
 
of  more  than  25 
N/cm  (as  determined  by  the  ASTM  D  3330  method) 
— 
013.001 
0.2416 
ex 3919 10 80 
57 
Reflecting  sheet: 
0 % 
— 
31.12.2023 
ex 3919 90 80 
30 
—  of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped 
ex 3920 61 00 
30 
pattern, 
—  covered on one or both sides with one or more layers of plastic or metallisation, and 
— 
—  whether  or  not  covered  on  one  side  with  a  self-adhesive  layer  and  a  release  sheet 
154
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6886 
ex 3919 10 80 
63 
Reflecting  film  consisting  of 
0 % 
— 
31.12.2020 
—  a  layer  of  an  acrylic  resin  with  imprints  against  counterfeiting,  alteration  or  substi­
tution  of  data  or  duplication,  or  an  official  mark  for  an  intended  use, 
—  a  layer  of  an  acrylic  resin  having  embedded  glass  beads, 
—  a  layer  of  an  acrylic  resin  hardened  by  a  melamine  cross-linking  agent, 
—  a  metal  layer, 
—  an  acrylic  adhesive,  and 
—  a  release  film 
▼M13 
0.5161 
ex 3919 10 80 
70 
Rolls  of  polyethylene  foil: 
0 % 
— 
31.12.2021 
ex 3919 90 80 
75 
—  self-adhesive  on  one  side, 
—  of  a  total  thickness  of  0,025  mm  or  more,  but  not  more  than  0,09  mm, 
—  of  a  total  width  of  60  mm  or  more,  but  not  more  than  1 110  mm, 
for  use  in  the  manufacture  of  products  of  Headings  8521  or  8528  for  protection 
purposes (2 ) 
02013R1387 
C3 
0.4545 
ex 3919 10 80 
73 
Self-adhesive  reflecting  sheet  whether  or  not  in  segmented  pieces: 
0 % 
— 
31.12.2023 
ex 3919 90 80 
50 
—  whether  or  not  containing  a  watermark, 
—  with  or  without  an  application  tape  coated  on  one  side  with  an  adhesive, 
— 
the  reflective  sheet  consists  of: 
EN — 
—  a  layer  of  acrylic  or  vinyl  polymer, 
—  a  layer  of  poly(methyl  methacrylate)  or  polycarbonate  containing  microprisms, 
—  a  layer  of  metallisation, 
01.07.2020 
—  an  adhesive  layer,  and 
—  a  release  sheet, 
—  whether  or  not  containing  an  additional  layer  of  polyester 
— 
0.5166 
ex 3919 10 80 
75 
Self-adhesive  reflecting  film,  consisting  of  several  layers  including: 
0 % 
— 
31.12.2021 
ex 3919 90 80 
80 
—  a  copolymer  of  acrylic  resin, 
013.001 
—  polyurethane, 
—  a metallised layer with, on one side, laser imprints against counterfeiting, alteration or 
substitution  of  data  or  duplications,  or  an  official  mark  for  an  intended  use, 
— 
—  glass  microspheres,  and 
155
—  an  adhesive  layer,  with  a  release  liner  on  one  or  both  sides 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4799 
ex 3919 10 80 
85 
Poly(vinyl  chloride),  poly(ethyleneterephthalate),  polyethylene  or  any  other  polyolefin 
0 % 
— 
31.12.2024 
ex 3919 90 80 
28 
film: 
—  coated  on  one  side  with  an  acrylic  UV-sensitive  adhesive  and  a  liner, 
—  of  a  total  thickness  of  65  μm  or  more  without  release  liner 
0.4414 
ex 3919 90 80 
19 
Transparent  poly(ethylene  terephthalate)  self-adhesive  film: 
0 % 
— 
31.12.2023 
—  free  from  impurities  or  faults, 
—  coated on  one  side with an  acrylic pressure sensitive adhesive  and  a  protective liner, 
and  on  the  other  side  with  an  antistatic  layer  of  ionic  organic  choline  compound, 
—  whether or not with a printable dust-proof layer of modified long chain alkyl organic 
compound, 
—  with  a  total thickness  without  the  liner of  54  μm  or  more  but  not  more  than  64  μm, 
and 
—  a  width  of  more  than  1 295  mm  but  not  more  than  1 305  mm 
02013R1387 
0.7415 
ex 3919 90 80 
21 
Polytetrafluoroethylene  film: 
0 % 
— 
31.12.2022 
—  with  a  thickness  of  50  μm  or  more  but  not  more  than  155  μm, 
—  with  a  width  of  6,30  mm  or  more  but  not  more  than  585  mm, 
—  an  elongation  at  break  of  not  more  than  200 %,  and 
—  coated on one side with a pressure sensitive silicone adhesive with a thickness of not 
more  than  40  μm 
— 
EN — 
01.07.2020 
0.4314 
ex 3919 90 80 
22 
Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic 
0 % 
— 
31.12.2024 
and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put 
up  in  rolls  of  a  width  of  45,7  cm  or  more  but  not  more  than  160  cm 
— 
013.001 
0.3243 
ex 3919 90 80 
23 
Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer 
0 % 
— 
31.12.2023 
of terephthalic acid, sebacic acid and  ethylene  glycol,  coated on  one  side  with  an  acrylic 
abrasion  resistant  coating  and  on  the  other  side  with  an  acrylic  pressure  sensitive 
adhesive,  a  water  soluble  methylcellulose  coating  and  a  poly(ethylene  terephthalate) 
— 
protective  liner 
156
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4760 
ex 3919 90 80 
24 
Reflecting  laminated  sheet: 
0 % 
— 
31.12.2024 
—  consisting  of  an  epoxy  acrylate  layer  embossed  on  one  side  in  a  regular  shaped 
pattern, 
—  covered  on  both  sides  with  one  or  more  layers  of  plastic  material,  and 
—  covered  on  one  side  with  an  adhesive  layer  and  a  release  sheet 
0.4415 
ex 3919 90 80 
33 
Transparent  poly(ethylene)  self-adhesive  film,  free  from  impurities  or  faults,  coated  on 
0 % 
— 
31.12.2023 
one  side  with  an  acrylic pressure sensitive adhesive,  with  a  thickness  of  60  μm  or  more, 
but  not  more  than  70  μm,  and  with  a  width  of  more  than  1 245  mm  but  not  more  than 
1 255  mm 
0.4398 
ex 3919 90 80 
35 
Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed 
0 % 
— 
31.12.2023 
regular  pattern,  consisting  of  poly(vinyl  chloride)  film  coated  on  one  side  with: 
—  a  layer  of  polyurethane  containing  glass  micro  beads, 
—  a  layer  of  poly(ethylene  vinyl  acetate), 
—  an  adhesive  layer,  and 
—  a  release  sheet 
02013R1387 
0.7503 
ex 3919 90 80 
37 
Polyethylene  or  polycarbonate  film,  cut  into  ready  to  use  forms: 
0 % 
— 
31.12.2023 
—  one side partly printed whereby part of the printing either gives information about the 
meaning of LED's visible at the unprinted areas, or marks those points which must be 
— 
touched  to  operate  the  system, 
—  the  other  side  partly  covered  with  an  adhesive  layer, 
EN — 
—  both  sides  covered  with  a  release  liner,  and 
—  with  dimensions  of  not  more  than  14  cm  x  2,5  cm, 
01.07.2020 
for  use  in  the  manufacture  of  push-button  switches  for  mechatronic  system  adjustable 
furniture (2 ) 
0.4445 
ex 3919 90 80 
49 
Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on 
0 % 
— 
31.12.2023 
— 
one  side  in  a  regular  shaped  pattern,  a  film  of  a  polymer  containing  glass  microspheres, 
013.001 
an  adhesive  layer  and  a  release  sheet 
— 
0.5507 
ex 3919 90 80 
51 
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but 
0 % 
— 
31.12.2023 
not  exceeding  90  μm,  covered  on  one  side  with  an  adhesive  layer  and  a  release  sheet 
157
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6883 
ex 3919 90 80 
52 
White  polyolefin  tape  consisting  of: 
0 % 
— 
31.12.2020 
—  an adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not 
more  than  17  μm, 
—  a polyolefin  layer with  a  thickness of  28  μm  or more  but  not  more than  40  μm,  and 
—  a  non-silicone  release  layer  with  a  thickness  below  1  μm 
0.4532 
ex 3919 90 80 
54 
Poly(vinyl  chloride)  film,  on  one  side  covered  with: 
0 % 
— 
31.12.2024 
—  a  polymer  layer, 
—  an  adhesive  layer, 
—  a  release  liner,  on  one  side  embossed,  containing  oblate  spheres, 
whether or not on the other side covered with an adhesive layer and a metallised polymer 
layer 
0.5052 
ex 3919 90 80 
63 
Co-extruded  trilayer  film: 
0 % 
— 
31.12.2020 
—  each  layer  containing  a  mixture  of  polypropylene  and  polyethylene, 
—  containing  not  more  than  3 %  by  weight  of  other  polymers, 
—  whether  or  not  containing  titanium  dioxide  in  the  core  layer, 
—  coated  with  an  acrylic  pressure  sensitive  adhesive  and 
—  with  a  release  liner, 
—  of  an  overall  thickness  of  not  more  than  110  μm 
02013R1387 
▼M13 
0.4947 
ex 3919 90 80 
65 
Self-adhesive  film  with  a  thickness  of  40  μm  or  more,  but  not  more  than  475  μm, 
0 % 
— 
31.12.2024 
consisting  of  one  or  more  layers  of  transparent,  metallised or  dyed  poly(ethylene  tereph­
thalate), covered on one side with a scratch resistant coating and on the other side with a 
— 
pressure  sensitive  adhesive  and  a  release  liner 
EN — 
C3 
01.07.2020 
0.4925 
ex 3919 90 80 
70 
Self-adhesive  polishing  discs  of  microporous  polyurethane,  whether  or  not  coated  with  a 
0 % 
— 
31.12.2020 
pad 
0.4964 
ex 3919 90 80 
82 
Reflecting  film  consisting  of: 
0 % 
— 
31.12.2020 
—  a  polyurethane  layer, 
— 
—  a  glass  microspheres  layer, 
013.001 
—  a  metallised  aluminium  layer,  and 
—  an  adhesive,  covered  on  one  or  both  sides  with  a  release  liner, 
—  whether  or  not  a  poly(vinyl  chloride)  layer, 
—  a  layer  whether  or  not  incorporating  security  imprints  against  counterfeiting, 
— 
alteration  or  substitution  of  data  or  duplication,  or  an  official  mark  for  an  intended 
158
use 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4459 
ex 3919 90 80 
83 
Reflector  or  diffuser  sheets,  in  rolls: 
0 % 
— 
31.12.2022 
ex 9001 90 00 
33 
—  for protection against ultraviolet or infra-red heat radiation, to be affixed to windows, 
or 
—  for  equal  transmission  and  distribution  of  light,  intended  for  LCD  modules 
▼M13 
0.3241 
ex 3920 10 25 
30 
Mono-layered  high-density  polyethylene  film: 
0 % 
— 
31.12.2023 
—  containing  by  weight  99 %  or  more  of  polyethylene, 
—  with  a  thickness  of  12  μm  or  more  but  not  more  than  20  μm, 
—  with  a  length  of  4 000  m  or  more  but  not  more  than  7 000  m, 
—  with  a  width  of  600  mm  or  more  but  not  more  than  900  mm 
C3 
0.4419 
ex 3920 10 28 
91 
Poly(ethylene)  film  printed  with  a  graphic  design,  which  is  achieved  by  using  four  base 
0 % 
— 
31.12.2023 
colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the 
film,  and  one  colour  on  the  opposite  side,  the  graphic  design  also  has  the  following 
characteristics: 
02013R1387 
—  is  repetitive  and  equally  spaced  along  the  length  of  the  film, 
—  is  equally  and  visibly  aligned  when  viewed  from  the  back  or  front  of  the  film 
0.6640 
ex 3920 10 40 
40 
Tubular  layered  film  predominately  of  polyethylene: 
0 % 
— 
31.12.2020 
—  consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on 
— 
either side with a layer of polyamide, covered on either side with at least one layer of 
EN — 
polyethylene, 
—  having  a  total  thickness  of  55  μm  or  more, 
—  having  a  diameter  of  500  mm  or  more  but  not  more  than  600  mm 
01.07.2020 
0.5139 
ex 3920 10 89 
30 
Ethylene  vinyl  acetate  (EVA)  film  with: 
0 % 
— 
31.12.2021 
—  a  raised  relief  surface  with  embossed  undulations,  and 
—  a  thickness  of  more  than  0,125  mm 
— 
0.3754 
ex 3920 10 89 
40 
Composite  sheet  containing  an  acrylic  coating  and  laminated  to  a  high-density  poly­
0 % 
— 
31.12.2021 
013.001 
ethylene  layer,  of  a  total  thickness  of  0,8  mm  or  more  but  not  more  than  1,2  mm 
0.5482 
ex 3920 20 21 
40 
Sheets  of  biaxially  -  oriented  polypropylene  film: 
0 % 
— 
31.12.2021 
— 
—  with  the  thickness  of  not  more  than  0,1  mm, 
159
—  printed  on  both  sides  with  specialised  coatings  to  allow  banknote  security  printing 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4394 
ex 3920 20 29 
60 
Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three 
0 % 
— 
31.12.2023 
or four layers, each layer containing a mixture of polypropylene and polyethylene, with a 
core  layer  whether  or  not  containing  titanium  dioxide,  having: 
—  a tensile strength in the machine direction of 120 MPa or more but not more than 270 
MPa,  and 
—  a tensile strength in the transverse direction of 10 MPa or more but not more than 40 
MPa, 
as  determined  by  test  method  ASTM  D882/ISO  527-3 
0.3028 
ex 3920 20 29 
70 
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of 
0 % 
— 
31.12.2024 
polypropylene  and  a  copolymer  of  ethylene  and  vinyl  acetate,  with  a  core  layer  whether 
or  not  containing  titanium  dioxide,  having: 
—  a  thickness  of  55  μm  or  more  but  not  more  than  97  μm, 
—  a  tensile  modulus  in  the  machine  direction  of  0,30  GPa  or  more  but  not  more  than 
1,45  GPa,  and 
—  a tensile modulus  in  the transverse direction of 0,20  GPa  or more  but not  more  than 
0,70  GPa 
02013R1387 
0.5167 
ex 3920 20 29 
94 
Co-extruded  trilayer  film: 
0 % 
— 
31.12.2022 
—  each  layer  containing  a  mixture  of  polypropylene  and  polyethylene, 
—  containing  not  more  than  3 %  by  weight  of  other  polymers, 
—  whether  or  not  containing  titanium  dioxide  in  the  core  layer, 
— 
—  of  an  overall  thickness  of  not  more  than  70  μm 
EN — 
0.3024 
ex 3920 43 10 
92 
Sheeting  of  poly(vinyl  chloride),  stabilized  against  ultraviolet  rays,  without  any  holes, 
0 % 
— 
31.12.2023 
01.07.2020 
even microscopic, of a thickness of 60  μm or more but not more than 80  μm, containing 
30  or  more  but  not  more  than  40  parts  of  plasticiser to  100  parts  of  poly(vinyl  chloride) 
— 
0.3235 
ex 3920 43 10 
94 
Film  of  a  specular  gloss  of  70  or  more,  measured  at  an  angle  of  60°  using  a  glossmeter 
0 % 
— 
31.12.2023 
013.001 
ex 3920 49 10 
93 
(as  determined  by  the  ISO  2813:2000  method),  consisting  of  one  or  two  layers  of 
poly(vinyl  chloride)  coated  on  both  sides  with  a  layer  of  plastic,  of  a  thickness  of  0,26 
mm  or  more  but  not  more  than  1,0  mm,  covered  on  the  gloss  surface  with  a  protective 
— 
film  of  polyethylene,  in  rolls  of  a  width  of  1 000  mm  or  more  but  not  more  than  1 450 
mm,  for  use  in  the  manufacture  of  goods  of  heading  9403 (2 ) 
160
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3026 
ex 3920 43 10 
95 
Reflecting  laminated  sheet,  consisting  of  a  film  of  poly(vinyl  chloride)  and  a  film  of  an 
0 % 
— 
31.12.2023 
other plastic totally  embossed  in  a  regular pyramidal pattern, covered  on  one  side  with  a 
release  sheet 
0.5930 
ex 3920 49 10 
30 
Film  of  a  (polyvinyl)chloride-copolymer 
0 % 
— 
31.12.2023 
—  containing  by  weight  45 %  or  more  of  fillers 
—  on  a  support 
0.3021 
ex 3920 51 00 
20 
Plate  of  poly(methyl  methacrylate)  containing  aluminium  trihydroxide,  of  a  thickness  of 
0 % 
— 
31.12.2023 
3,5  mm  or  more  but  not  more  than  19  mm 
0.5506 
ex 3920 51 00 
30 
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but 
0 % 
— 
31.12.2023 
not  exceeding  90  μm 
0.5753 
ex 3920 51 00 
40 
Sheets  of  polymethylmethacrylate  conforming  to  standard  EN  4366  (MIL-PRF-25690) 
0 % 
— 
31.12.2023 
02013R1387 
0.7418 
ex 3920 62 19 
05 
Poly(ethylene  terephthalate)  film  in  rolls: 
0 % 
— 
31.12.2022 
ex 3920 62 90 
10 
—  with  a  thickness  of  0,335  mm  or  more  but  not  more  than  0,365  mm,  and 
—  coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 
μm 
— 
0.3234 
ex 3920 62 19 
08 
Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more 
0 % 
— 
31.12.2023 
EN — 
than  25  μm,  either: 
—  only  dyed  in  the  mass,  or 
01.07.2020 
—  dyed  in  the  mass  and  metallised  on  one  side 
0.3017 
ex 3920 62 19 
12 
Film  of  poly(ethylene  terephthalate) only,  of  a  total  thickness  of  not  more  than  120  μm, 
0 % 
— 
31.12.2023 
consisting of one or two layers each containing a colouring and/or UV-absorbing material 
— 
throughout  the  mass,  uncoated  with  an  adhesive  or  any  other  material 
013.001 
0.3022 
ex 3920 62 19 
18 
Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 
0 % 
— 
31.12.2023 
120  μm,  consisting  of  one  layer  which  is  metallised  only  and  one  or  two  layers  each 
— 
containing a colouring and/or UV-absorbing  material throughout  the mass, uncoated with 
161
an  adhesive  or  any  other  material 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3034 
ex 3920 62 19 
20 
Reflecting  polyester  sheeting  embossed  in  a  pyramidal  pattern,  for  the  manufacture  of 
0 % 
— 
31.12.2023 
safety  stickers  and  badges,  safety  clothing  and  accessories  thereof,  or  of  school  satchels, 
bags  or  similar  containers (2 ) 
0.3356 
ex 3920 62 19 
38 
Poly(ethylene  terephthalate) film,  of  a  thickness  of  not  more  than  12  μm,  coated  on  one 
0 % 
— 
31.12.2023 
side  with  a  layer  of  aluminium  oxide  of  a  thickness  of  not  more  than  35  nm 
0.3357 
ex 3920 62 19 
48 
Sheets  or  rolls  of  poly(ethylene  terephthalate): 
0 % 
— 
31.12.2020 
—  coated  on  both  sides  with  a  layer  of  epoxy  acrylic  resin, 
—  of  a  total  thickness  of  37  μm  (±  3  μm) 
0.2589 
ex 3920 62 19 
52 
Film  of  poly(ethylene  terephthalate),  poly(ethylene  naphthalate)  or  similar  polyester, 
0 % 
— 
31.12.2023 
coated  on  one  side  with  metal  and/or  metal  oxides,  containing  by  weight  less  than 
0,1 %  of  aluminium,  of  a  thickness  of  not  more  than  300  μm  and  having  a  surface 
resistivity  of  not  more  than  10 000  ohms  (per  square)  (as  determined  by  the  ASTM  D 
257-99  method) 
02013R1387 
0.4344 
ex 3920 62 19 
60 
Poly(ethylene  terephthalate)  film: 
0 % 
— 
31.12.2022 
—  of  a  thickness  of  not  more  than  20  μm, 
—  coated on at least one side with a gas barrier layer consisting of a polymeric matrix in 
— 
which  silica  or  aluminium  oxide  has  been  dispersed  and  of  a  thickness  of  not  more 
than  2μm 
EN — 
01.07.2020 
0.4520 
ex 3920 62 19 
76 
Transparent  poly(ethylene  terephthalate)  film: 
0 % 
— 
31.12.2023 
—  coated  on  both  sides  with  layers  of  organic  substances  on  the  basis  of  acryl  of  a 
thickness  of  7  nm  or  more  but  not  more  than  80  nm, 
—  with  a  surface  tension  of  36  Dyne/cm  or  more  but  not  more  than  39  Dyne/cm, 
—  with  a  light  transmission  of  more  than  93 %, 
— 
—  with  a  haze  value  of  not  more  than  1,3 %, 
013.001 
—  with  a  total  thickness  of  10  μm  or  more  but  not  more  than  350  μm, 
—  with  a  width  of  800  mm  or  more  but  not  more  than  1 600  mm 
— 
0.3328 
ex 3920 69 00 
20 
Film  of  poly(ethylene  naphthalene-2,6-dicarboxylate) 
0 % 
— 
31.12.2023 
162
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7882 
ex 3920 69 00 
30 
Mono-  or  multilayer,  transverse  oriented,  shrink  film: 
0 % 
— 
31.12.2024 
—  composed  of  more  than  85 %  by  weight  of  polylactic  acid,  not  more  than  5 %  by 
weight  of  inorganic  or  organic  additives  and  not  more  than  10 %  by  weight  of 
additives  based  on  biodegradable  polyesters, 
—  with  a  thickness  of  20  μm  or  more  but  not  more  than  100  μm, 
—  with  a  length  of  2 385  m  or  more  but  not  more  than  9 075  m, 
—  biodegradable  and  compostable  (as  determined  by  the  method  EN  13432) 
C3 
0.6483 
ex 3920 69 00 
50 
Monolayer,  biaxially  oriented  film: 
0 % 
— 
31.12.2024 
—  composed  of  more  than  85 %  by  weight  of  poly(lactic  acid)  and  not  more  than 
10,50 %  by  weight  of  modified  poly(lactic  acid)  based  polymer,  poly-glycol  ester 
and  talc, 
—  having  a  thickness  of  20  μm  or  more  but  not  more  than  120  μm, 
—  biodegradable  and  compostable  (as  determined  by  the  method  EN  13432) 
0.6484 
ex 3920 69 00 
60 
Monolayer,  transverse  oriented,  shrink  film: 
0 % 
— 
31.12.2024 
—  composed  of  more  than  80 %  by  weight  of  poly(lactic  acid)  and  not  more  than 
02013R1387 
15,75 %  by  weight  of  additives  of  modified  poly(lactic  acid), 
—  having  a  thickness  of  45  μm  or  more  but  not  more  than  50  μm, 
—  biodegradable  and  compostable  (as  determined  by  the  method  EN  13432) 
▼M13 
— 
0.7883 
ex 3920 69 00 
70 
Mono-  or  multilayer,  biaxially  oriented  film: 
0 % 
— 
31.12.2024 
EN — 
—  composed  of  more  than  85 %  by  weight  of  polylactic  acid,  not  more  than  5 %  by 
weight  of  inorganic  or  organic  additives,  and  not  more  than  10 %  by  weight  of 
additives  based  on  biodegradable  polyesters, 
01.07.2020 
—  with  a  thickness  of  9  μm  or  more  but  not  more  than  120  μm, 
—  with  a  length  of  1 395  m  or  more  but  not  more  than  21 560  m, 
—  biodegradable  and  compostable  (as  determined  by  the  method  EN  13432) 
C3 
— 
013.001 
0.6515 
ex 3920 79 10 
10 
Sheets  of  painted  vulcanised  fibre-board  with  a  thickness  of  not  more  than  1,5  mm 
0 % 
p/st 
31.12.2024 
0.4766 
ex 3920 91 00 
52 
Poly(vinyl  butyral)  film: 
0 % 
— 
31.12.2024 
—  containing  by  weight  26 %  or  more  but  not  more  than  30 %  of  triethyleneglycol 
— 
bis(2-ethyl  hexanoate)  as  a  plasticiser, 
163
—  with  a  thickness  of  0,73  mm  or  more  but  not  more  than  1,50  mm 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3329 
ex 3920 91 00 
91 
Poly(vinyl  butyral)  film  having  a  graduated  coloured  band 
3 % 
— 
31.12.2023 
0.3136 
ex 3920 91 00 
93 
Film  of  poly(ethylene  terephthalate),  whether  or  not  metallised  on  one  or  both  sides,  or 
0 % 
— 
31.12.2024 
laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, 
and  having  the  following  characteristics: 
—  a  visible  light  transmission  of  50 %  or  more, 
—  coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an 
adhesive  or  any  other  material  except  poly(vinyl  butyral), 
—  a  total thickness  of  not  more  than  0,2  mm  without  taking  the presence of  poly(vinyl 
butyral)  into  account  and  a  thickness  of  poly(vinyl  butyral)  of  more  than  0,2  mm 
0.4508 
ex 3920 91 00 
95 
Co-extruded  trilayer poly(vinyl  butyral) film with  a  graduated  colour  band  containing  by 
0 % 
— 
31.12.2023 
weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhex­
anoate)  as  a  plasticiser 
0.3917 
ex 3920 99 28 
40 
Polymer  film  containing  the  following  monomers: 
0 % 
— 
31.12.2023 
—  poly  (tetramethylene  ether  glycol), 
—  bis  (4-isocyanotocyclohexyl)  methane, 
02013R1387 
—  1,4-butanediol  or  1,3-butanediol, 
—  with  a  thickness  of  0,25  mm  or  more  but  not  more  than  5,0  mm, 
—  embossed  with  a  regular  pattern  on  one  surface, 
—  and  covered  with  a  release  sheet 
— 
0.5938 
ex 3920 99 28 
45 
Transparent  polyurethane  film  metallised  on  one  side: 
0 % 
— 
31.12.2024 
EN — 
—  with  a  gloss  of  more  than  90  degrees  according  to  ASTM  D2457, 
—  covered  on  the  metallised  side  with  a  heat  bonding  adhesive  layer  consisting  of 
polyethylene/polypropylene  copolymer, 
01.07.2020 
—  covered  on  the  other  side  with  a  protective  poly(ethylene  terephthalate)  film, 
—  with  a  total  thickness  of  more  than  204  μm  but  not  more  than  244  μm 
0.4192 
ex 3920 99 28 
50 
Thermoplastic  polyurethane  film,  of  a  thickness  of  250  μm  or  more  but  not  more  than 
0 % 
— 
31.12.2021 
— 
350  μm,  covered  on  one  side  with  a  removable  protective  film 
013.001 
0.6579 
ex 3920 99 28 
65 
Matt,  thermoplastic  polyurethane  foil  in  rolls  with: 
0 % 
m2 
31.12.2024 
—  a  width  of  1640  mm  (±  10  mm), 
— 
—  a  gloss  of  3,3  degrees  or  more  but  not  more  than  3,8  (as  determined  by  the  method 
164
ASTM  D2457), 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
—  a  surface  roughness  of  1,9  Ra  or  more  but  not  more  than  2,8  Ra  (as  determined  by 
the  method  ISO  4287), 
—  a  thickness  of  more  than  365  μm  but  not  more  than  760  μm, 
—  a  hardness  of  90  (±  4)  (as  determined  by  the  method:  Shore  A  (ASTM  D2240)), 
—  an  elongation  to  break  of  470 %  (as  determined  by  the  method:  EN  ISO  527) 
0.5315 
ex 3920 99 28 
70 
Sheets  on  rolls,  consisting  of  epoxy  resin,  with  conducting  properties,  containing: 
0 % 
— 
31.12.2021 
—  microspheres  with  a  coating  of  metal,  whether  or  not  alloyed  with  gold, 
—  an  adhesive  layer, 
—  with  a  protective  layer  of  silicone  or  poly(ethylene  terephthalate)  on  one  side, 
—  with  a  protective  layer  of  poly(ethylene  terephthalate)  on  the  other  side,  and 
—  with  a  width  of  5  cm  or  more  but  not  more  than  100  cm 
—  with  a  length  of  not  more  than  2 000  m 
0.3326 
ex 3920 99 59 
25 
Poly(1-chlorotrifluoroethylene)  film 
0 % 
— 
31.12.2023 
0.7603 
ex 3920 99 59 
30 
Poly(tetrafluoroethylene)  film  containing  by  weight  10 %  or  more  of  graphite 
0 % 
— 
31.12.2023 
02013R1387 
0.2873 
ex 3920 99 59 
55 
Ion-exchange  membranes  of  fluorinated  plastic  material 
0 % 
— 
31.12.2023 
0.3135 
ex 3920 99 59 
65 
Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more 
0 % 
— 
31.12.2023 
— 
but  not  more  than  90  μm,  a  tensile  strength  at  break  of  20  MPa  or  more  but  not  more 
than  55  MPa  and  an  elongation  at  break  of  250 %  or  more  but  not  more  than  900 % 
EN — 
01.07.2020 
0.7127 
ex 3920 99 59 
70 
Tetrafluoroethylene  film,  put  up  in  rolls,  with: 
0 % 
— 
31.12.2021 
—  a  thickness  of  50  μm, 
—  a  melting  point  of  260  °C,  and 
—  a  specific  gravity  of  1,75  (ASTM  D792), 
for  use  in  the  manufacture  of  semiconductor  devices (2 ) 
— 
013.001 
0.7529 
ex 3920 99 59 
75 
Film  of  fluorinated  ethylene  propylene  resin  (CAS  RN  25067-11-2)  with: 
0 % 
— 
31.12.2023 
—  a  thickness  of  0,010  mm  or  more  but  not  more  than  0,80  mm, 
— 
—  a  width  of  1 219  mm  or  more  but  not  more  than  1 575  mm,  and 
—  a  melting  point  of  252  °C  (measured  according  ASTM  D-3418) 
165
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4095 
ex 3920 99 90 
20 
Anisotropic  conductive  film,  in  rolls,  of  a  width  of  1,2  mm  or  more  but  not  more  than 
0 % 
— 
31.12.2023 
3,15 mm and a maximum length of 300 m, used for joining electronic components in the 
production  of  LCD  or  plasma  displays 
0.3318 
ex 3921 13 10 
10 
Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 
0 % 
m3 
31.12.2024 
0,09435  or  more  but  not  more  than  0,10092 
0.5815 
ex 3921 13 10 
20 
Rolls  of  open-cell  polyurethane  foam: 
0 % 
— 
31.12.2022 
—  with  a  thickness  of  2,29  mm  (±0,25  mm), 
—  surface-treated  with  a  foraminous  adhesion  promoter,  and 
—  laminated  to  a  polyester  film  and  a  layer  of  textile  material 
0.6066 
ex 3921 19 00 
30 
Blocks  with  cellular  structure,  containing  by  weight: 
0 % 
— 
31.12.2023 
—  polyamide-6  or  poly(epoxy  anhydride) 
—  7 %  or  more  but  not  more  than  9 %  of  polytetrafluorethylene,  if  present 
—  10 %  or  more  but  not  more  than  25 %  of  inorganic  fillers 
02013R1387 
0.6911 
ex 3921 19 00 
40 
Transparent,  microporous,  acrylic  acid  grafted  polyethylene  film,  in  the  form  of  rolls, 
3,2 % 
— 
31.12.2020 
with: 
—  a  width  of  98  mm  or  more  but  not  more  than  170  mm, 
—  a  thickness  of  15  μm  or  more  but  not  more  than  36  μm, 
of  a  kind  used  for  the  manufacture  of  alkaline  battery  separators 
— 
EN — 
0.7132 
ex 3921 19 00 
50 
Porous  membrane  of  polytetrafluorethylene  (PTFE)  laminated  to  a  polyester  spunbonded 
0 % 
— 
31.12.2021 
non-woven  cloth  with: 
01.07.2020 
—  a  total  thickness  of  more  than  0,05  mm  but  not  more  than  0,20  mm, 
—  a  water  entry  pressure  between  5  and  200  kPa  according  to  ISO  811,  and 
—  an  air  permeability  of  0,08  cm3 /cm2 /s  or  more  according  to  ISO  5636-5 
— 
0.7280 
ex 3921 19 00 
60 
Multi-porous  multilayer  separator  foil  with: 
0 % 
m2 
31.12.2022 
013.001 
—  one  microporous  polyethylene  layer  between  two  microporous  polypropylene  layers 
and  whether  or  not  containing  a  coating  of  aluminium  oxide  on  both  sides, 
—  a  width  of  65  mm  or  more  but  not  more  than  170  mm, 
— 
—  a  total  thickness  of  0,01  mm  or  more  but  not  more  than  0,03  mm, 
166
—  a  porosity  of  0,25  or  more  but  not  more  than  0,65 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7309 
ex 3921 19 00 
70 
Microporous  membranes  of  expanded  Polytetrafluoroethylene  (ePTFE)  in  rolls,  having: 
0 % 
— 
31.12.2022 
—  a  width  of  1 600  mm  or  more  but  not  more  than  1 730  mm,  and 
—  a  membrane  thickness  of  15  μm  or  more,  but  not  more  than  50  μm, 
for  use  in  the  manufacture  of  a  bi-component  ePTFE  membrane (2 ) 
0.7263 
ex 3921 19 00 
80 
Microporous  monolayer  film  of  polypropylene  or  a  microporous  trilayer  film  of  poly­
0 % 
— 
31.12.2022 
propylene,  polyethylene  and  polypropylene,  each  film  with: 
—  zero  transversal  production  direction  (TD)  shrinkage, 
—  a  total  thickness  of  10  μm  or  more  but  not  more  than  50  μm, 
—  a  width  of  15  mm  or  more  but  not  more  than  900  mm, 
—  a  length  of  more  than  200  m  but  not  more  than  3000  m,  and 
—  an  average  pore  size  between  0,02  μm  and  0,1  μm 
0.3314 
ex 3921 19 00 
93 
Strip of microporous polytetrafluoroethylene on  a support  of a non-woven,  for use in the 
0 % 
— 
31.12.2023 
manufacture  of  filters  for  kidney  dialysis  equipment (2 ) 
0.3002 
ex 3921 19 00 
95 
Film  of  polyethersulfone,  of  a  thickness  of  not  more  than  200  μm 
0 % 
— 
31.12.2023 
02013R1387 
0.3003 
ex 3921 90 10 
10 
Composite  plate  of  poly(ethylene  terephthalate)  or  of  poly(butylene  terephthalate), 
0 % 
— 
31.12.2023 
reinforced  with  glass  fibres 
— 
EN — 
0.4379 
ex 3921 90 10 
20 
Poly(ethylene  terephthalate) film, laminated  on  one  side  or  on  both  sides  with  a  layer  of 
0 % 
— 
31.12.2023 
unidirectional  nonwoven  poly(ethylene  terephthalate) and  impregnated  with  polyurethane 
or  epoxide  resin 
01.07.2020 
0.6156 
ex 3921 90 10 
30 
Multilayer  film  consisting  of: 
0 % 
m2 
31.12.2023 
—  a  poly(ethylene  terephthalate)  film  with  a  thickness  of  more  than  100  μm  but  not 
more  than  150  μm, 
— 
—  a primer of phenolic  material with a thickness of more than 8  μm but  not more than 
013.001 
15  μm, 
—  an adhesive  layer of a synthetic rubber with a thickness of more than 20  μm but not 
more  than  30  μm, 
— 
—  and  a  transparent poly(ethylene  terephthalate) liner with  a  thickness  of  more  than  35 
μm  but  not  more  than  40  μm 
167
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4844 
ex 3921 90 55 
25 
Prepreg  sheets  or  rolls  containing  polyimide  resin 
0 % 
— 
31.12.2024 
ex 7019 40 00 
21 
ex 7019 40 00 
29 
0.7510 
ex 3921 90 55 
35 
Glass  fiber  impregnated  with  epoxy  resin  for  use  in  the  manufacture  of  smart  cards (2 ) 
0 % 
m2 
31.12.2023 
0.6742 
ex 3921 90 55 
40 
Three  layered  fabric  sheet,  in  rolls: 
0 % 
m2 
31.12.2020 
—  comprising  a core layer of  100 %  Nylon  Taffeta or Nylon/Polyester  blended  Taffeta, 
—  coated  on  both  sides  with  polyamide, 
—  of  a  total  thickness  not  more  than  135  μm, 
—  of  a  total  weight  not  more  than  80  g/m2 
0.6807 
ex 3921 90 55 
50 
Glass  fibre-reinforced  sheets  of  reactive,  halogen-free  epoxide  resin  with  hardener, 
0 % 
m2 
31.12.2020 
additives  and  inorganic  fillers  for  use  in  encapsulating  semiconductor  systems (2 ) 
▼M13 
02013R1387 
0.3312 
ex 3921 90 60 
35 
Ion-exchange  membranes  based  on  a  fabric  coated  on  both  sides  with  fluorinated  plastic 
0 % 
— 
31.12.2023 
material,  for  use  in  chlor-alkali  electrolytic  cells (2 ) 
— 
C3 
EN — 
0.5396 
ex 3923 10 90 
10 
Photomask  or  wafer  compacts: 
0 % 
— 
31.12.2021 
—  consisting  of  antistatic  materials  or  blended  thermoplastics  proving  special  elec­
01.07.2020 
trostatic  discharge  (ESD)  and  outgassing  properties, 
—  having  non  porous,  abrasion  resistant  or  impact  resistant  surface  properties, 
—  fitted with a specially designed retainer system that protects the photomask or wafers 
from  surface  or  cosmetic  damage,  and 
— 
—  with  or  without  a  gasket  seal, 
of  a  kind  used  in  the  photolithography  or  other  semiconductor  production  to  house 
013.001 
photomasks  or  wafers 
— 
0.7040 
ex 3926 30 00 
20 
Plastic  logo  of  the  automobile  manufacturer  with  mounting  brackets  on  the  back  side, 
0 % 
— 
31.12.2021 
168
whether  or  not  chromed,  for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7335 
ex 3926 30 00 
30 
Electroplated  interior  or  exterior  decorative  parts  consisting  of: 
0 % 
p/st 
31.12.2022 
ex 3926 90 97 
34 
—  a  copolymer  of  acrylonitrile-butadiene-styrene  (ABS),  whether  or  not  mixed  with 
polycarbonate, 
—  layers  of  copper,  nickel  and  chromium, 
for  use  in  the  manufacturing  of  parts  for  motor  vehicles  of  heading  8701  to  8705 (2 ) 
0.7630 
ex 3926 30 00 
40 
Plastic  internal  door  handle  used  in  the  manufacture  of  motor  vehicles (2 ) 
0 % 
— 
31.12.2023 
0.2764 
ex 3926 90 97 
10 
Microspheres  of  a  polymer  of  divinylbenzene,  of  a  diameter  of  4,5  μm  or  more  but  not 
0 % 
— 
31.12.2023 
more  than  80  μm 
0.3756 
ex 3926 90 97 
15 
Glass  fibre  reinforced  plastic  traverse  leaf  spring  for  use  in  the  manufacture  of  motor 
0 % 
— 
31.12.2023 
vehicle  suspension  systems (2 ) 
02013R1387 
0.2978 
ex 3926 90 97 
20 
Reflecting  sheeting  or  tape,  consisting  of  a  facing-strip  of  poly(vinyl  chloride) embossed 
0 % 
— 
31.12.2023 
in  a  regular  pyramidal  pattern,  heat-sealed  in  parallel  lines  or  in  a  grid-pattern  to  a 
backing-strip  of  plastic  material,  or  of  knitted  or  woven  fabric  covered  on  one  side 
— 
with  plastic  material 
EN — 
01.07.2020 
0.6717 
ex 3926 90 97 
23 
Plastic  cover  with  clips  for  the  exterior  rear-view  mirror  of  motor  vehicles 
0 % 
p/st 
31.12.2020 
0.3850 
ex 3926 90 97 
25 
Unexpansible  microspheres  of  a  copolymer  of  acrylonitrile,  methacrylonitrile  and 
0 % 
— 
31.12.2023 
— 
isobornyl  methacrylate,  of  a  diameter  of  3  μm  or  more  but  not  more  than  4,6  μm 
013.001 
0.7445 
ex 3926 90 97 
27 
Gasket  of  polyethylene  foam,  intended  to  fill-up the  space  between  the  body  of  a  motor 
0 % 
— 
31.12.2023 
— 
vehicle  and  the  base  of  a  rear-view  mirror 
169
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5474 
ex 3926 90 97 
30 
Parts  of  car  radio  and  car  air-conditioner  front  panels: 
0 % 
— 
31.12.2021 
—  of  acrylonitrile-butadiene-styrene with  or  without  polycarbonate, 
—  coated  with  a  copper,  a  nickel  and  a  chrome  layers, 
—  with  a  total  thickness  of  coating  of  5,54  μm  or  more  but  not  more  than  49,6  μm 
0.6301 
ex 3926 90 97 
33 
Housings,  housing  parts,  drums,  setting  wheels,  frames,  covers  and  other  parts  of 
0 % 
p/st 
31.12.2024 
acrylonitrile-butadiene-styrene  or  polycarbonate,  of  a  kind  used  for  the  manufacture  of 
remote  controls 
0.7061 
ex 3926 90 97 
40 
Silicone  shell  for  breast  implant 
0 % 
— 
31.12.2021 
0.6166 
ex 3926 90 97 
50 
Knob  of  car  radio  front  panel,  made  of  Bisphenol  A-based  polycarbonate,  in  immediate 
0 % 
p/st 
31.12.2023 
packings  of  not  less  than  300  pieces 
0.7196 
ex 3926 90 97 
77 
Silicone  decoupling  ring  with  an  inner  diameter  of  14,7  mm  or  more  but  not  more  than 
0 % 
p/st 
31.12.2021 
16,0  mm,  in  immediate  packings  of  2 500  pieces  or  more,  of  a  kind  used  in  car  parking 
aid  sensor  systems 
02013R1387 
0.3046 
ex 4007 00 00 
10 
Siliconated  vulcanised  rubber  thread  and  cord 
0 % 
— 
31.12.2023 
▼M13 
— 
EN — 
0.6708 
ex 4009 42 00 
20 
Rubber  brake  hose  with: 
0 % 
— 
31.12.2024 
—  textile  strings, 
01.07.2020 
—  a  wall  thickness  of  3,2  mm, 
—  a  metal  hollow  terminal  pressed  on  both  ends,  and 
—  one  or  more  mounting  brackets, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
— 
013.001 
C3 
0.7042 
ex 4010 31 00 
10 
Vulcanized  rubber  endless  transmission  belt  of  trapezoidal  cross-section  (V-belts)  with 
0 % 
— 
31.12.2021 
— 
ex 4010 33 00 
10 
longitudinal  V-ribbed  pattern  on  the  inner  side  for  use  in  the  manufacture  of  goods  of 
170
ex 4010 39 00 
10 
Chapter  87 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6844 
ex 4016 93 00 
20 
Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible 
0 % 
— 
31.12.2020 
outflow  of  the  material  in  the  place  of  mould  split  of  not  more  than  0,25  mm,  in  the 
shape  of  a  rectangle: 
—  with  a  length  of  72  mm  or  more  but  not  more  than  825  mm; 
—  with  a  width  of  18  mm  or  more  but  not  more  than  155  mm 
0.7170 
ex 4016 99 57 
10 
Air  intake  hose  for  air  supply  to  the  combustion  part  of  the  engine  comprising  at  least: 
0 % 
p/st 
31.12.2021 
—  one  flexible  rubber  hose, 
—  one  plastic  hose,  and 
—  metal  clips, 
—  whether  or  not  a  resonator, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.7169 
ex 4016 99 57 
20 
Rubber bumper strip with a silicone coating of a length not more than 1 200 mm and with 
0 % 
p/st 
31.12.2021 
at  least  five  plastic  clips  for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
02013R1387 
0.7357 
ex 4016 99 57 
30 
Pin  boot  of  a  brake  calliper  made  of  vulcanized  rubber  with: 
0 % 
— 
31.12.2022 
—  an  inner  diameter of  not  less  than  5  mm  and  an  outer  diameter of  not  more  than  35 
mm, 
—  a  height  of  15  mm  or  more,  but  not  more  than  40  mm,  and 
—  a  ribbed  design, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
— 
EN — 
0.5148 
ex 4016 99 97 
30 
Tyre  moulding  bladder 
0 % 
— 
31.12.2021 
01.07.2020 
0.5842 
ex 4104 41 19 
10 
Buffalo  leather,  split,  chrome  tanned  synthetic  retanned  ('crust'),  dry 
0 % 
— 
31.12.2022 
— 
0.2555 
4105 10 00 
Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, 
0 % 
— 
31.12.2023 
013.001 
4105 30 90 
whether  or  not  split,  other  than  leather  of  heading  4114 
— 
0.2553 
4106 21 00 
Goat  or  kid  skin  leather,  without  hair  on,  tanned  or  retanned  but  not  further  prepared, 
0 % 
— 
31.12.2023 
4106 22 90 
whether  or  not  split,  other  than  leather  of  heading  4114 
171
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2554 
4106 31 00 
Leather  of  other  animals,  without  hair  on,  not  further  prepared  than  tanned,  other  than 
0 % 
— 
31.12.2023 
4106 32 00 
leather  of  heading  4114 
4106 40 90 
4106 92 00 
0.6223 
ex 4408 39 30 
10 
Okoume  veneer  sheets: 
0 % 
— 
31.12.2023 
—  of  a  length  of  1 270  mm  or  more,  but  not  more  than  3 200  mm, 
—  of  a  width  of  150  mm  or  more,  but  not  more  than  2 000  mm, 
—  of  a  thickness  of  0,5  mm  or  more,  but  not  more  than  4  mm, 
—  not  sanded,  and 
—  not  planed 
0.7065 
ex 4412 99 40 
10 
Laminated  wood  consisting  of  two  layers  of  sheets  for  veneering: 
0 % 
— 
31.12.2021 
ex 4412 99 50 
10 
—  a  width  of  210  mm  or  more  but  not  more  than  320  mm, 
ex 4412 99 85 
20 
—  a  length  of  297  mm  or  more  but  not  more  than  450  mm, 
—  a  thickness  of  0,45  mm  or  more  but  not  more  than  0,8  mm, 
for use  in the  manufacture of  products  falling within heading  4420,  4421,  4820,  4909  or 
02013R1387 
4911 (2 ) 
0.4217 
ex 5004 00 10 
10 
Silk  yarn  (other  than  yarn  spun  from  silk  waste)  not  put  up  for  retail  sale,  unbleached, 
0 % 
— 
31.12.2021 
scoured  or  bleached,  entirely  of  silk 
— 
EN — 
0.2551 
ex 5005 00 10 
10 
Yarn  spun  entirely  from  silk  waste  (noil),  not  put  up  for  retail  sale 
0 % 
— 
31.12.2023 
ex 5005 00 90 
10 
01.07.2020 
0.2544 
5208 11 10 
Fabrics  for  the  manufacture  of  bandages,  dressings  and  medical  gauzes 
5,2 % 
— 
31.12.2023 
— 
▼M13 
013.001 
0.7372 
ex 5311 00 90 
10 
Plain-woven  fabric  of  paper  yarns  glued  on  a  tissue  paper  layer: 
0 % 
— 
31.12.2022 
— 
—  with  a  weight  of  190  g/m2  or  more  but  not  more  than  280  g/m2 ,  and 
—  cut  into  rectangles  with  a  side  length  of  40  cm  or  more  but  not  more  than  140  cm 
172
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7515 
ex 5311 00 90 
20 
Sisal  cloth  in  rolls  with: 
0 % 
— 
31.12.2023 
—  a  length  of  20  metres  or  more  but  not  more  than  30  metres,  and 
—  a  maximum  width  of  2,5  metres, 
for  use  in  the  production  of  Stainless  Steel  Kitchenware (2 ) 
0.7608 
ex 5402 44 00 
10 
Synthetic  elastomeric  filament  yarn: 
0 % 
— 
31.12.2023 
—  untwisted  or  with  a  twist  not  exceeding  50  turns  per  metre,  measuring  300  dtex  or 
more  but  not  more  than  1 000  dtex, 
—  composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 
3-methyltetrahydrofuran, 
for  use  in  the  manufacture  of  disposable  hygiene  products  of  heading  9619 (2 ) 
0.4902 
ex 5402 47 00 
20 
Bicomponent  monofilament  yarn  of  not  more  than  30  dtex,  consisting  of: 
0 % 
— 
31.12.2020 
—  a  poly(ethylene  terephthalate)  core,  and 
—  an outer layer of  a copolymer  of poly(ethyleneterephthalate) and  poly(ethyleneisoph­
thalate), 
for  use  in  the  manufacture  of  filtration  fabrics (2 ) 
02013R1387 
0.2975 
ex 5402 49 00 
30 
Yarn  of  a  copolymer  of  glycollic  acid  with  lactic  acid,  for  the  manufacture  of  surgical 
0 % 
— 
31.12.2023 
sutures (2 ) 
— 
EN — 
0.3098 
ex 5402 49 00 
50 
Non-textured  filament  yarn  of  poly(vinyl  alcohol) 
0 % 
— 
31.12.2023 
01.07.2020 
0.3096 
ex 5402 49 00 
70 
Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the 
0 % 

31.12.2023 
form of a  wick containing  1 000  continuous  filaments or  more but  not  more than  25 000 
continuous  filaments, of  a  weight  per  metre  of  0,12  g  or  more  but  not  more  than  3,75  g 
— 
and  of  a  length  of  100  m  or  more,  for  the  manufacture  of  carbon-fibre  yarn (2 ) 
013.001 
0.6884 
ex 5403 39 00 
10 
Biodegradable  (norm  EN  14995)  monofilament  of  not  more  than  33  dtex,  containing  at 
0 % 
— 
31.12.2020 
— 
least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for 
the  food  industry (2 ) 
173
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2481 
ex 5404 19 00 
50 
Monofilaments  of  polyester  or  poly(butylene  terephthalate),  with  cross-sectional 
0 % 
— 
31.12.2023 
dimension  of  0,5  mm  or  more  but  not  more  than  1  mm,  for  use  in  the  manufacture  of 
zippers (2 ) 
0.3311 
ex 5404 90 90 
20 
Strip  of  polyimide 
0 % 
— 
31.12.2023 
0.4258 
ex 5407 10 00 
10 
Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns 
0 % 
— 
31.12.2022 
of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine 
and  3,4'–oxybis  (phenyleneamine) 
0.3090 
ex 5503 11 00 
10 
Synthetic  staple fibres of  a  copolymer  of  terephthalic acid,  p-phenylenediamine  and  3,4'- 
0 % 
— 
31.12.2023 
ex 5601 30 00 
40 
oxybis(phenyleneamine),  of  a  length  of  not  more  than  7  mm 
0.3214 
ex 5503 90 00 
20 
Poly(vinyl  alcohol)  fibres,  whether  or  not  acetalized 
0 % 
— 
31.12.2023 
02013R1387 
ex 5506 90 00 
10 
ex 5601 30 00 
10 
0.3212 
ex 5603 11 10 
10 
Poly(vinyl  alcohol)  non-wovens,  in  the  piece  or  cut  into  rectangles: 
0 % 
m2 
31.12.2023 
— 
ex 5603 11 90 
10 
—  of  a  thickness  of  200  μm  or  more  but  not  more  than  280  μm,  and 
EN — 
ex 5603 12 10 
10 
—  of  a  weight  of  20  g/m2  or  more  but  not  more  than  50  g/m2 
ex 5603 12 90 
10 
ex 5603 91 10 
10 
01.07.2020 
ex 5603 91 90 
10 
ex 5603 92 10 
10 
ex 5603 92 90 
10 
— 
0.2552 
ex 5603 12 90 
30 
Non-wovens of aromatic polyamide fibres obtained by polycondensation  of m-phenylene­
0 % 
m2 
31.12.2023 
013.001 
ex 5603 13 90 
30 
diamine  and  isophthalic  acid,  in  the  piece  or  cut  into  rectangles 
ex 5603 14 90 
10 
ex 5603 92 90 
60 
— 
ex 5603 93 90 
40 
ex 5603 94 90 
30 
174
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2548 
ex 5603 12 90 
60 
Non-woven  of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more 
0 % 
m2 
31.12.2023 
ex 5603 13 90 
60 
than  80  g/m2  and  an  air  resistance  (Gurley)  of  8  seconds  or  more  but  not  more  than  36 
seconds  (as  determined  by  the  ISO  5636/5  method) 
0.5059 
ex 5603 13 10 
20 
Non-woven  of  spunbonded  polyethylene,  with  a  coating, 
0 % 
m2 
31.12.2020 
—  of  a  weight  of  more  than  80  g/m2  but  not  more  than  105  g/m2 ,  and 
—  an  air  resistance  (Gurley)  of  8  seconds  or  more  but  not  more  than  75  seconds  (as 
determined  by  the  ISO  5636/5  method) 
0.5987 
ex 5603 14 90 
40 
Non-wovens,  consisting  of  poly(ethylene  terephthlate)  spun  bonded  media: 
0 % 
m2 
31.12.2023 
—  of  weight  of  160  g/m2  or  more  but  not  more  than  300  g/m2 , 
—  whether  or  not  laminated  on  one  side  with  a  membrane  or  a  membrane  and 
aluminium, 
of  a  kind  used  for  the  manufacture  of  industrial  filters 
02013R1387 
0.3041 
ex 5603 92 90 
20 
Non-wovens  consisting  of  a  meltblown  central  layer  of  a  thermoplastic  elastomer 
0 % 
m2 
31.12.2023 
ex 5603 93 90 
20 
laminated  on  each  side  with  spunbonded  filaments  of  polypropylene 
— 
EN — 
0.3042 
ex 5603 92 90 
70 
Non-wovens,  consisting  of  multiple  layers  of  a  mixture  of  meltblown  fibres  and  staple 
0 % 
m2 
31.12.2023 
ex 5603 94 90 
40 
fibres  of  polypropylene  and  polyester,  whether  or  not  laminated  on  one  side  or  on  both 
01.07.2020 
sides  with  spunbonded  filaments  of  polypropylene 
0.5197 
ex 5603 92 90 
80 
Non-woven  polyolefin  fabric,  consisting  of  an  elastomeric  layer,  laminated  on  each  side 
0 % 
m2 
31.12.2021 
— 
ex 5603 93 90 
50 
with  polyolefin  filaments: 
013.001 
—  a  weight  of  25  g/m2  or  more  but  not  more  than  150  g/m2 , 
—  in  the  piece  or  simply  cut  into  squares  or  rectangles, 
—  not  impregnated, 
—  with  cross-directional  or  machine-directional  stretch  properties, 
— 
for  use  in  the  manufacture  of  infant/child  care  products (2 ) 
175
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6135 
ex 5603 93 90 
60 
Nonwovens  made  of  polyester  fibres: 
0 % 
m2 
31.12.2023 
—  with  a  weight  of  85  g/m2 , 
—  with  a  constant  thickness  of  95  μm  (±  5  μm), 
—  neither  coated  nor  covered, 
—  in  1  m  wide  rolls  of  2 000  m  to  5 000  m  length, 
suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis 
filters (2 ) 
0.3210 
ex 5603 94 90 
20 
Acrylic  fibre  rods,  having  a  length  of  not  more  than  50  cm,  for  the  manufacture  of  pen 
0 % 
m2 
31.12.2023 
tips (2 ) 
0.3406 
ex 5607 50 90 
10 
Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with 
0 % 
— 
31.12.2024 
lactic  acid,  plaited  or  braided,  with  an  inner  core,  for  the  manufacture  of  surgical 
sutures (2 ) 
02013R1387 
0.2415 
ex 5803 00 10 
91 
Gauze  of  cotton,  of  a  width  of  less  than  1 500  mm 
0 % 
— 
31.12.2023 
0.7081 
ex 5903 20 90 
20 
Two  layers'  plastic-laminated  textile  fabric  with: 
0 % 
— 
31.12.2021 
— 
—  one  layer  consisting  of  knitted  or  crocheted  polyester  textile  fabric, 
—  other  layer  consisting  of  polyurethane  foam, 
EN — 
—  a  weight  of  150  g/m2  or  more,  but  not  more  than  500  g/m2 , 
—  a  thickness  of  1  mm  or  more,  but  not  more  than  5  mm, 
01.07.2020 
for  use  in  the  manufacture  of  the  retractable  roof  of  motor  vehicles (2 ) 
0.2417 
ex 5906 99 90 
10 
Rubberised  textile  fabric,  consisting  of  warp  yarns  of  polyamide-6,6  and  weft  yarns  of 
0 % 
— 
31.12.2023 
— 
polyamide-6,6,  polyurethane  and  a  copolymer  of  terephthalic  acid,  p-phenylenediamine 
and  3,4'-oxybis(phenyleneamine) 
013.001 
0.2453 
ex 5907 00 00 
10 
Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not 
0 % 
— 
31.12.2021 
— 
more  than  150  μm 
176
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3207 
ex 5911 90 99 
30 
Parts of equipment for the purification of water by reverse osmosis, consisting essentially 
0 % 
— 
31.12.2023 
ex 8421 99 90 
92 
of  plastic-based  membranes,  supported  internally  by  woven  or  non-woven  textile 
materials  which  are  wound  round  a  perforated  tube,  and  enclosed  in  a  cylindrical 
plastic  casing  of  a  wall-thickness  of  not  more  than  4  mm,  whether  or  not  housed  in  a 
cylinder  of  a  wall-thickness  of  5  mm  or  more 
0.4638 
ex 5911 90 99 
40 
Multi-layered  non-woven  polyester  polishing  pads,  impregnated  with  polyurethane 
0 % 
— 
31.12.2024 
0.7340 
ex 5911 90 99 
50 
Loudspeaker  vibration  damper,  made  from  round,  corrugated,  flexible  and  cut-to-size 
0 % 
— 
31.12.2022 
tissue  of  textile  fibres  of  polyester,  cotton  or  aramid  or  a  combination  hereof,  of  a 
kind  used  in  car  loudspeakers 
0.6469 
ex 6804 21 00 
20 
Discs: 
0 % 
p/st 
31.12.2024 
—  of  synthetic  diamonds  which  are  agglomerated  with  a  metal  alloy,  ceramic  alloy  or 
plastic  alloy, 
02013R1387 
—  having  a  self-sharpening  effect  by  constant  release  of  the  diamonds, 
—  suitable  for  abrasive  cutting  of  wafers, 
—  whether  or  not  containing  a  hole  in  the  centre, 
—  whether  or  not  on  a  support, 
—  with  a  weight  of  not  more  than  377  g  per  piece,  and 
— 
—  with  an  external  diameter  of  not  more  than  206  mm 
EN — 
01.07.2020 
0.7126 
ex 6805 30 00 
10 
Probe  tips  cleaning  material consisting  of  a  polymer  matrix  containing  abrasive  particles 
0 % 
— 
31.12.2021 
mounted  on  a  substrate  for  use  in  the  manufacture  of  semiconductors (2 ) 
— 
0.2755 
ex 6813 89 00 
20 
Friction  material,  of  a  thickness  of  less  than  20  mm,  not  mounted,  for  use  in  the  manu­
0 % 
— 
31.12.2023 
facture  of  friction  components (2 ) 
013.001 
0.5931 
ex 6814 10 00 
10 
Agglomerated  mica with a  thickness of not  more than 0,15  mm,  on  rolls, whether or not 
0 % 
— 
31.12.2023 
— 
calcined,  whether  or  not  reinforced  with  aramid  fibres 
177
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.2546 
ex 6903 90 90 
30 
Silicon  carbide  reactor tubes  and  holders  having  a  softening  point  of  1 400  °C  or  higher 
0 % 
— 
31.12.2023 
C3 
0.4978 
ex 6909 19 00 
20 
Silicon  nitride  (Si 3N 4)  rollers  or  balls 
0 % 
— 
31.12.2020 
0.6071 
ex 6909 19 00 
25 
Ceramic  proppants,  containing  aluminium  oxide,  silicon  oxide  and  iron  oxide 
0 % 
— 
31.12.2023 
0.3403 
ex 6909 19 00 
30 
Supports  for  catalysts,  consisting  of  porous  cordierite  or  mullite  ceramic  pieces,  of  an 
0 % 
— 
31.12.2023 
overall volume  of not more than  65  l, having,  per cm2  of the cross-section, not  less than 
one  continuous  channel  which  may  be  open  at  both  ends  or  stopped  at  one  end 
02013R1387 
0.2538 
ex 6909 19 00 
50 
Ceramic  articles  made  of  continuous  filaments  of  ceramic  oxides,  containing  by  weight: 
0 % 
— 
31.12.2023 
ex 6914 90 00 
20 
—  2 %  or  more  of  diboron  trioxide, 
—  28 %  or  less  of  silicon  dioxide,  and 
—  60 %  or  more  of  dialuminium  trioxide 
— 
EN — 
0.3766 
ex 6909 19 00 
60 
Supports  for  catalysts,  consisting  of  porous  ceramic  pieces,  of  a  blend  of  silicon  carbide 
0 % 
— 
31.12.2023 
and silicon, with a hardness of less than 9 on the Mohs  scale, with a total volume of not 
01.07.2020 
more than 65 litres, having, per cm2 of the surface of the cross section one or more closed 
channels  at  the  tail  end 
0.4582 
ex 6909 19 00 
70 
Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides 
0 % 
— 
31.12.2023 
— 
of aluminium and titanium; with a total volume of not more than 65 litres and at least one 
013.001 
duct  (open  on  one  or  both  ends)  per  cm2  of  cross  section 
— 
0.3404 
ex 6914 90 00 
30 
Ceramic microspheres,  transparent,  obtained  from  silicon  dioxide  and  zirconium  dioxide, 
0 % 
— 
31.12.2024 
of  a  diameter  of  more  than  125  μm 
178
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6651 
ex 7004 90 80 
10 
Alkali-aluminosilicate  drawn  flat  glass  sheet  with: 
0 % 
— 
31.12.2020 
—  a  scratch  proof  coating  of  a  thickness  of  45  μm  (+/-  5  μm), 
—  a  total  thickness  of  0,45  mm  or  more  but  not  more  than  1,1  mm, 
—  a  width  of  300  mm  or  more  but  not  more  than  3210  mm, 
—  a  length  of  300  mm  or  more  but  not  more  than  2 000  mm, 
—  a  visible  light  transmission  of  90 %  or  more, 
—  an  optical  distortion  of  55°  or  more 
0.6286 
ex 7006 00 90 
25 
Glass  wafer  made  of  borosilicate  float  glass: 
0 % 
p/st 
31.12.2024 
—  with  a  total  thickness  variation  of  1  μm  or  less,  and 
—  laser-engraved 
▼M13 
0.7619 
ex 7006 00 90 
40 
Plates  of  sodalime  glass  of  STN  (Super  Twisted  Nematic)  quality  having: 
0 % 
— 
31.12.2023 
—  a  length  of  300  mm  or  more  but  not  more  than  1 500  mm, 
—  a  width  of  300  mm  or  more  but  not  more  than  1 500  mm, 
—  a  thickness  of  0,5  mm  or  more  but  not  more  than  1,1  mm, 
02013R1387 
—  an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 
Ω  on  one  side, 
—  with  or  without  a  multilayer  anti-reflection-coating  on  the  other  side  and  machined 
(chamfered)  edges 
— 
C3 
EN — 
0.6380 
ex 7009 10 00 
30 
Layered  glass  with  mechanical  dimming  ability  by  different  angles  of  incident  light 
0 % 
p/st 
31.12.2024 
01.07.2020 
comprising: 
—  whether  or  not  a  layer  of  chrome, 
—  a  break-resistance  adhesive  tape  or  hot-melt  adhesive,  and 
—  a  release  film  on  the  front  side  and  protective  paper  at  the  back  side, 
of  a  kind  used  for  interior  rear-view  mirrors  of  vehicles 
— 
013.001 
0.6870 
ex 7009 10 00 
40 
Electrochromic  self-dimming  inside  rear-view  mirror,  consisting  of: 
0 % 
— 
31.12.2020 
—  a  mirror  support, 
—  a  plastic  casing,  and 
— 
—  an  integrated  circuit, 
179
for  use  in  the  manufacture  of  motor  vehicles  of  Chapter  87 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5789 
ex 7009 10 00 
50 
Unfinished  electro-chromic  auto-dimming  mirror  for  motor  vehicle  rear-view  mirrors: 
0 % 
— 
31.12.2022 
—  whether  or  not  equipped  with  plastic  backing  plate, 
—  whether  or  not  equipped  with  a  heating  element, 
—  whether  or  not  equipped  with  Blind  Spot  Module  (BSM)  display 
0.5022 
ex 7009 91 00 
10 
Unframed  glass  mirrors  with: 
0 % 
p/st 
31.12.2020 
—  a  length  of  1516  mm  (±  1  mm), 
—  a  width  of  553  mm  (±  1  mm), 
—  a  thickness  of  3  mm  (±0,1  mm), 
—  the  back  of  the  mirror  covered  with  protective  polyethylene  (PE)  film,  with  a 
thickness  of  0,11  mm  or  more  but  not  more  than  0,13  mm, 
—  a  lead  content  of  not  more  than  90  mg/kg,  and 
—  a  corrosion  resistance  of  72  hours  or  more  according  to  ISO  9227  salt  spray  test 
0.3400 
ex 7014 00 00 
10 
Optical elements of glass (other than those of heading  7015),  not optically worked,  other 
0 % 
— 
31.12.2023 
than  signalling  glassware 
02013R1387 
0.3161 
ex 7019 12 00 
02 
Rovings,  measuring 650  tex or more but not more than 2 500  tex, coated with a layer of 
0 % 
— 
31.12.2023 
ex 7019 12 00 
22 
polyurethane  whether  or  not  mixed  with  other  materials 
— 
EN — 
0.5750 
ex 7019 12 00 
05 
Rovings  ranging  from  1 980  to  2 033  tex,  composed  of  continuous  glass  filaments  of  9 
0 % 
— 
31.12.2022 
ex 7019 12 00 
25 
μm  (±0,5  μm) 
01.07.2020 
0.2532 
ex 7019 19 10 
10 
Yarn  of  33  tex  or  a  multiple  thereof  (±7,5  %),  obtained  from  continuous  spun-glass 
0 % 
— 
31.12.2023 
filaments  of  a  nominal  diameter  of  3,5  μm  or  of  4,5  μm,  in  which  filaments  of  a 
— 
diameter  of  3  μm  or  more  but  not  more  than  5,2  μm  predominate,  other  than  those 
treated  so  as  to  improve  their  adhesion  to  elastomers 
013.001 
0.5749 
ex 7019 19 10 
15 
S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass 
0 % 
— 
31.12.2022 
— 
filaments  with  fibres  of  a  diameter  of  9  μm  (-  1  μm  /  +1,5  μm) 
180
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5021 
ex 7019 19 10 
20 
Yarn  of  10,3  tex  or  more  but  not  more  than  11,9  tex,  obtained  from  continuous  spun- 
0 % 
— 
31.12.2020 
glass  filaments,  in  which  filaments of  a  diameter  of  4,83  μm  or  more  but  not  more  than 
5,83  μm  predominate 
0.5020 
ex 7019 19 10 
25 
Yarn  of  5,1  tex  or  more  but  not  more  than  6,0  tex,  obtained  from  continuous  spun-glass 
0 % 
— 
31.12.2020 
filaments,  in  which  filaments  of  a  diameter  of  4,83  μm  or  more  but  not  more  than  5,83 
μm  predominate 
0.2535 
ex 7019 19 10 
30 
Yarn of  E-glass of 22  tex (±1,6  tex), obtained  from continuous  spun-glass  filaments of  a 
0 % 
— 
31.12.2024 
nominal diameter of 7  μm,  in which  filaments of a diameter of 6,35  μm or  more but not 
more  than  7,61  μm  predominate 
0.4848 
ex 7019 19 10 
50 
Yarn  of  11  tex  or  a  multiple  thereof  (±7,5  %),  obtained  from  continuous  spun-glass 
0 % 
— 
31.12.2022 
filaments,  containing  93 %  by  weight  or  more  of  silicon  dioxide,  of  a  nominal 
diameter  of  6  μm  or  9  μm,  other  than  those  treated 
02013R1387 
0.2872 
ex 7019 19 10 
55 
Glass  cord  impregnated  with  rubber  or  plastic,  obtained  from  K-  or  U-glass  filaments, 
0 % 
— 
31.12.2024 
made  up  of: 
—  9 %  or  more  but  not  more  than  16 %  of  magnesium  oxide, 
—  19 %  or  more  but  not  more  than  25 %  of  aluminium  oxide, 
— 
—  0 %  or  more  but  not  more  than  2 %  of  boron  oxide, 
—  without  calcium  oxide, 
EN — 
coated  with  a  latex  comprising  at  least  a  resorcinol-  formaldehyde  resin  and  chlorosul­
phonated  polyethylene 
01.07.2020 
0.4024 
ex 7019 19 10 
60 
High  modulus  glass  cord  (K)  impregnated  with  rubber,  obtained  from  twisted  high 
0 % 
— 
31.12.2023 
ex 7019 90 00 
30 
modulus  glass  filament  yarns,  coated  with  a  latex  comprising  a  resorcinol-formaldehyde 
resin  with  or  without  vinylpyridine  and/or  hydrogenated  acrylonitrile-butadiene  rubber 
— 
(HNBR) 
013.001 
0.3153 
ex 7019 19 10 
70 
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, 
0 % 
— 
31.12.2023 
— 
ex 7019 90 00 
20 
coated  with a  latex comprising  at least a resorcinol-formaldehyde-vinylpyridine resin and 
an  acrylonitrile-butadiene  rubber  (NBR) 
181
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4059 
ex 7019 39 00 
50 
Non-woven  product  of  non-textile  glass  fibre,  for  the  manufacture  of  air  filters  or  cata­
0 % 
— 
31.12.2021 
lysts (2 ) 
0.4476 
ex 7019 40 00 
11 
Woven  fabrics  of  rovings,  impregnated  with  epoxy  resin,  with  a  coefficient  of  thermal 
0 % 
— 
31.12.2023 
ex 7019 40 00 
19 
expansion  between  30°C  and  120  °C  (measured  according  to  IPC-TM-650)  of: 
—  10 ppm per°C or more but not more than 12ppm per °C in the length and width, and 
—  20  ppm  per°C  or  more  but  not  more  than  30  ppm  per  °C  in  the  thickness,  with  a 
glass transition temperature of 152  °C  or more but  not more than 153  °C  (measured 
according  IPC-TM-650) 
0.7056 
ex 7019 40 00 
70 
E-fibre  glass  fabrics: 
0 % 
m2 
31.12.2021 
ex 7019 52 00 
30 
—  having  a  weight  of  20  g/m2  or  more,  but  not  more  than  214  g/m2 , 
—  impregnated  with  silane, 
—  in  rolls, 
—  having  a  humidity  content  by  weight  of  0,13 %  or  less,  and 
—  having  not  more  than  3  hollow  fibres  out  of  100 000  fibres, 
02013R1387 
for  the  exclusive  use  in  the  manufacture  of  prepregs  and  copper  clad  laminates (2 ) 
0.7647 
ex 7019 52 00 
40 
Epoxy  resin  coated  glass  woven  fabric  containing  by  weight: 
0 % 
— 
31.12.2023 
—  91 %  or  more  but  not  more  than  93 %  of  glass  fibres, 
— 
—  7 %  or  more  but  not  more  than  9 %  of  epoxy  resin 
EN — 
01.07.2020 
0.3940 
ex 7019 90 00 
10 
Non-textile  glass  fibres  in  which  fibres  of  a  diameter  of  less  than  4,6  μm  predominate 
0 % 
— 
31.12.2023 
0.5348 
ex 7020 00 10 
10 
Television  pedestal  stands  with  or  without  bracket  for  fixation  to  and  stabilization  of 
0 % 
p/st 
31.12.2021 
— 
ex 7616 99 90 
77 
television  cabinet  case/body 
013.001 
0.7266 
ex 7020 00 10 
20 
Raw  material  for  optical  elements  of  fused  silicon  dioxide  with: 
0 % 
p/st 
31.12.2022 
—  a  thickness  of  10  cm  or  more  but  not  more  than  40  cm  and 
— 
—  a  weight  of  100  kg  or  more 
182
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4127 
ex 7201 10 11 
10 
Pig  iron  ingots  with  a  length  of  not  more  than  350  mm,  a  width  of  not  more  than  150 
0 % 
— 
31.12.2021 
mm,  a  height  of  not  more  than  150  mm 
0.4128 
ex 7201 10 30 
10 
Pig  iron  ingots  with  a  length  of  not  more  than  350  mm,  a  width  of  not  more  than  150 
0 % 
— 
31.12.2021 
mm,  a  height  of  not  more  than  150  mm,  containing  by  weight  not  more  than  1 %  of 
silicon 
0.3353 
7202 50 00 
Ferro-silico-chromium 
0 % 
— 
31.12.2023 
0.4853 
ex 7202 99 80 
10 
Ferro-dysprosium,  containing  by  weight: 
0 % 
— 
31.12.2020 
—  78 %  or  more  of  dysprosium,  and 
—  18 %  or  more  but  not  more  than  22 %  of  iron 
0.7235 
ex 7315 11 90 
10 
Roller type steel timing chain with a fatigue limit of 2 kN at 7 000 rpm or more for use in 
0 % 
— 
31.12.2022 
the  manufacture  of  engines  of  motor  vehicles (2 ) 
0.7166 
ex 7318 19 00 
30 
Connecting  rod  for the  master brake cylinder  with  screw threads on  both  ends  for use  in 
0 % 
p/st 
31.12.2021 
the  manufacture  of  goods  of  Chapter  87 (2 ) 
02013R1387 
0.7502 
ex 7318 24 00 
30 
Restraint  joint  elements: 
0 % 
— 
31.12.2023 
—  of  martensitic  stainless  steel  according  to  specification  17-4PH, 
—  injection  moulded, 
—  with  a  rockwell  hardness  of  38  (±1)  or  53  (+2/-1), 
— 
—  measuring 9 mm x 5,5 mm x 6,5 mm or more, but not more than 35 mm x 17 mm x 
EN — 
8  mm, 
of  a  kind  used  for  restraint  joints  for  tubes  and  pipes 
01.07.2020 
0.4548 
ex 7320 90 10 
91 
Flat  spiral  spring  of  tempered  steel,  with: 
0 % 
p/st 
31.12.2023 
—  a  thickness  of  2,67  mm  or  more,  but  not  more  than  4,11  mm, 
—  a  width  of  12,57  mm  or  more,  but  not  more  than  16,01  mm, 
—  a  torque  of  18,05  Nm  or  more,  but  not  more  than  73,5  Nm, 
—  an  angle  between  the  free  position  and  the  nominal  position  in  exercise  of  76°  or 
— 
more,  but  not  more  than  218°, 
013.001 
for  use  in  the  manufacture  of  tensioners  for  power  transmission  belts,  for  internal 
combustion  engines (2 ) 
— 
0.4126 
ex 7326 20 00 
20 
Metal  fleece,  consisting  of  a  mass  of  stainless  steel  wires  of  diameters  of  0,001  mm  or 
0 % 
— 
31.12.2021 
183
more  but  not  more  than  0,070  mm,  compacted  by  sintering  and  rolling 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7414 
ex 7326 90 92 
40 
Steel  nozzle  shell  with  integral  flange  in  one  piece  open-die  forged  from  4  castings, 
0 % 
p/st 
31.12.2022 
worked  and  machined,  with: 
—  a  diameter  of  5 752  mm  or  more  but  not  more  than  5 758  mm, 
—  a  height  of  3 452  mm  or  more  but  not  more  than  3 454  mm, 
—  a  total  weight  167 875  kg  or  more  but  not  more  than  168 125  kg, 
of  a  kind  used  for  the  fabrication  of  a  nuclear  reactor  vessel 
▼M13 
0.7891 
ex 7326 90 94 
40 
Steel ball neck, drop forged, machined, also heat treated or surface treated, with an angle 
0 % 
— 
31.12.2024 
between  the  centre  of  the  conical  head  and  the  arm  of  less  than  90°  or  with  an  angle 
between the centre of the ball and the arm of less than 90°, for use in the manufacture of 
trailer  hitches  for  passenger  cars (2 ) 
C3 
0.6680 
ex 7326 90 98 
40 
Iron  and  steel  weights: 
0 % 
— 
31.12.2020 
—  whether  or  not  with  parts  of  other  material, 
—  whether  or  not  with  parts  of  other  metals, 
—  whether  or  not  surface  treated, 
—  whether  or  not  printed, 
of  a  kind  used  for  the  production  of  remote  controls 
02013R1387 
▼M13 
0.7365 
ex 8708 80 99 
30 
Surface-hardened,  steel  piston  rod  for  a  hydraulic  or  hydropneumatic  shock  absorber  of 
0 % 
— 
31.12.2022 
motor  vehicles: 
—  with  a  chrome  coating, 
—  of  a  diameter  of  11  mm  or  more,  but  not  more  than  28  mm, 
— 
—  of  a  length  of  80  mm  or  more,  but  not  more  than  600  mm,with  a  threaded  end  or  a 
EN — 
mandrel  for  resistance  welding 
C3 
01.07.2020 
0.7401 
ex 7409 19 00 
10 
Plates  or  sheets: 
0 % 
— 
31.12.2022 
ex 7410 21 00 
70 
—  with  at  least  one  layer  of  woven  glass  fibre,  impregnated  with  a  fire-  retardant 
artificial  or  synthetic  resin  with  a  glass  transition  temperature  (Tg)  of  more  than 
130  °C  as  measured  according  to  IPC-TM-650,  method  2.4.25, 
—  coated  on  one  or  both  sides  with  a  copper  film  with  a  thickness  of  not  more  than 
— 
3,2  mm, 
013.001 
and  containing  at  least  one  of  the  following: 
—  poly(tetrafluoroethylene)  (CAS  RN  9002-84-0), 
—  poly(oxy-(2,6-dimethyl)-1,4-phenylene)  (CAS  RN  25134-01-4), 
— 
—  epoxy resin having a thermal expansion of not more than 10 ppm in length and width 
and  not  more  than  25  ppm  in  height, 
184
for  use  in  the  manufacture  of  circuit  boards (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5311 
ex 7410 11 00 
10 
Roll  of  laminate  foil  of  graphite  and  copper,  with: 
1,3 % 
— 
31.12.2020 
ex 8507 90 80 
60 
—  a  width  of  610  mm  or  more  but  not  more  than  620  mm,  and 
ex 8545 90 90 
30 
—  a  diameter  of  690  mm  or  more  but  not  more  than  710  mm, 
for  use  in  the  manufacture  of  lithium-ion  electric  rechargeable  batteries (2 ) 
0.3352 
ex 7410 21 00 
10 
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide 
0 % 
— 
31.12.2023 
as  filler  or  reinforced  with  glass-fibre  fabric,  covered  on  both  sides  with  copper  foil 
0.7509 
ex 7410 21 00 
20 
Foils,  rolls  composed  of  one  layer  of  glass  epoxy  of  100  μm  colaminated  with  refined 
0 % 
m2 
31.12.2023 
copper  foil  on  one  or  two  sides  of  35  μm  with  a  tolerance  of  10 %  for  use  in  the 
production  of  smart  cards (2 ) 
0.3005 
ex 7410 21 00 
30 
Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on 
0 % 
— 
31.12.2023 
one  side  or  on  both  sides  with  a  copper  foil 
0.3926 
ex 7410 21 00 
40 
Sheet  or  plates: 
0 % 
— 
31.12.2023 
02013R1387 
—  consisting  of  at  least  a  central  layer  of  paper  or  one  central  sheet  of  any  type  of 
nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with 
epoxide  resin,  or 
—  consisting  of  multiple  layers  of  paper,  impregnated  with  phenolic  resin, 
coated  on  one  or  both  sides  with  a  copper  film  with  a  maximum  thickness  of  0,15  mm 
— 
EN — 
0.4479 
ex 7410 21 00 
50 
Plates: 
0 % 
— 
31.12.2023 
—  consisting  of  at  least  one  layer  of  fibreglass  fabric  impregnated  with  thermosetting 
resin, 
01.07.2020 
—  covered on one or both sides with copper foil with a thickness of not more than 0,15 
mm,  and 
—  with  a  dielectric  constant  (DK)  of  less  than  3,9  and  a  loss  factor  (Df)  of  less  than 
0,015  at  a  measuring  frequency  of  10  GHz,  as  measured  according  to  IPC-TM-650 
— 
013.001 
▼M13 
— 
0.7341 
ex 7413 00 00 
20 
Loudspeaker  centring  ring,  consisting  of  one  or  more  vibration  dampers  and  minimum 
0 % 
— 
31.12.2022 
185
two  non-insulated  copper  cables,  therein  woven  or  pressed 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2447 
ex 7419 99 90 
91 
Disc  (target)  with  deposition  material,  consisting  of  molybdenum  silicide: 
0 % 
— 
31.12.2023 
ex 7616 99 90 
60 
—  containing  1mg/kg  or  less  of  sodium,  and 
—  mounted  on  a  copper  or  aluminium  support 
▼M13 
0.7911 
ex 7506 20 00 
10 
Sheets  and  strips  in  coils  of  nickel  alloy  C276  (EN  2.4819)  with 
0 % 
— 
31.12.2024 
—  a  thickness  of  0,5  mm  or  more  but  not  more  than  3  mm, 
—  a  width  of  770  mm  or  more  but  not  more  than  1 250  mm 
C3 
0.5890 
7601 20 20 
Slabs  and  billets  of  unwrought  aluminium  alloys 
4 % 
— 
31.12.2023 
0.4259 
ex 7601 20 20 
10 
Slabs  and  billets  of  aluminium  alloy  containing  lithium 
0 % 
— 
31.12.2022 
0.7752 
ex 7604 21 00 
10 
Hollow  profile  with: 
0 % 
— 
31.12.2024 
—  one  closed  chamber  of  aluminium  alloy  6063-T5  or  6060-T5, 
02013R1387 
—  a  wall  thickness  of  not  more  than  0,7  mm,  and 
—  an  anodized  layer  of  10  μm  at  the  surface, 
for  use  in  the  manufacture  of  board  frames  of  whiteboards,  cork  boards,  easel  boards, 
education  boards  and  display  cases (2 ) 
— 
0.5029 
ex 7604 29 10 
10 
Sheets  and  bars  of  aluminium-lithium  alloys 
0 % 
— 
31.12.2020 
EN — 
ex 7606 12 99 
20 
0.6417 
ex 7604 29 10 
40 
Bars  and  rods  of  aluminium  alloys  containing  by  weight: 
0 % 
— 
31.12.2024 
01.07.2020 
—  0,25 %  or  more  but  not  more  than  7 %  of  zinc,  and 
—  1 %  or  more  but  not  more  than  3 %  of  magnesium,  and 
—  1 %  or  more  but  not  more  than  5 %  of  copper,  and 
—  not  more  than  1 %  of  manganese, 
consistent  with  the  material  specifications  AMS  QQ-A-225,  of  a  kind  used  in  aerospace 
— 
industry  (inter  alia  conforming  NADCAP  and  AS9100)  and  obtained  by  rolling  mill 
013.001 
process 
0.2410 
ex 7605 19 00 
10 
Not  alloyed  aluminium  wire,  of  a  diameter  of  2  mm  or  more  but  not  more  than  6  mm, 
0 % 
— 
31.12.2023 
— 
covered  with  a  layer  of  copper  of  a  thickness  of  0,032  mm  or  more  but  not  more  than 
186
0,117  mm 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6418 
ex 7605 29 00 
10 
Wire  of  aluminium  alloys  containing  by  weight: 
0 % 

31.12.2024 
—  0,10 %  or  more  but  not  more  than  5 %  of  copper,  and 
—  0,2 %  or  more  but  not  more  than  6 %  of  magnesium,  and 
—  0,10 %  or  more  but  not  more  than  7 %  of  zinc,  and 
—  not  more  than  1 %  of  manganese, 
consistent  with  the  material  specifications  AMS  QQ-A-430,  of  a  kind  used  in  aerospace 
industry  (inter  alia  conforming  NADCAP  and  AS9100)  and  obtained  by  rolling  mill 
process 
0.5487 
ex 7607 11 90 
47 
Aluminium  foil  in  rolls: 
0 % 
— 
31.12.2021 
ex 7607 11 90 
57 
—  having  a  purity  of  99,99 %  by  weight, 
—  of  a  thickness  of  0,021  mm  or  more  but  not  more  than  0,2  mm, 
—  with  a  width  of  500  mm, 
—  with  a  surface  oxide  layer  by  3  to  4  nm  thick, 
—  and  with  a  cubic  texture  of  more  than  95 % 
0.4050 
ex 7607 11 90 
60 
Plain  aluminium  foil  with  the  following  parameters: 
0 % 
— 
31.12.2021 
02013R1387 
—  an  aluminium  content  of  99,98 %  or  more, 
—  a  thickness  of  0,070  mm  or  more  but  not  more  than  0,125  mm, 
—  with  a  cubic  texture, 
of  a  kind  used  for  high  voltage  etching 
— 
EN — 
0.5312 
ex 7607 19 90 
10 
Sheet  in  the  form  of  a  roll consisting  of  a  laminate of  lithium and  manganese  bonded  to 
0 % 
— 
31.12.2021 
ex 8507 90 80 
80 
aluminium,  with: 
—  a  width  of  595  mm  or  more  but  not  more  than  605  mm,  and 
01.07.2020 
—  a  diameter  of  690  mm  or  more  but  not  more  than  710  mm, 
for  use  in  the  manufacture  of  cathodes  for  lithium-ion  electric  rechargeable  batteries (2 ) 
— 
0.7698 
ex 7607 20 90 
10 
Aluminium  foil,  in  rolls: 
3,7 % 
— 
31.12.2020 
013.001 
—  coated  with  polypropylene  on  one  side  and  with  polyamide  on  the  other  side  with 
adhesive  layers  between 
—  with  a  width  of  200  mm  or  more,  but  not  more  than  400  mm, 
— 
—  with  a  thickness  of  0,138  mm  or  more,  but  not  more  than  0,168  mm, 
for  use  in  the  manufacture  of  lithium-ion  battery  cell  pouches (2 ) 
187
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7746 
ex 7608 20 81 
20 
Seamless  aluminium  alloyed  extruded  tubes  (Aluminium  6061F  according  to  standard 
0 % 
— 
31.12.2024 
ASTM  B241)  with: 
—  an  outer  diameter  of  320  mm  or  more  but  not  more  than  400  mm,  and 
—  a  wall  thickness  of  8  mm  or  more  but  not  more  than  10  mm, 
for  use  in  the  manufacture  of  high  pressure  vessels (2 ) 
0.6138 
ex 7608 20 89 
30 
Seamless  aluminium  alloyed  extruded  tubes  with: 
0 % 
— 
31.12.2023 
—  an  outer  diameter  of  60  mm  or  more  but  not  more  than  420  mm,  and 
—  a  wall  thickness  of  10  mm  or  more  but  not  more  than  80  mm 
0.7747 
ex 7608 20 89 
40 
Seamless  flow  forming  aluminium  alloyed  tubes  (Aluminium  6061A  according  to 
0 % 
— 
31.12.2024 
standard  ISO  7866)  with: 
—  an  outer  diameter  of  378  mm  or  more  but  not  more  than  385  mm,  and 
—  a  wall  thickness  of  4  mm  or  more  but  not  more  than  7  mm, 
for  use  in  the  manufacture  of  high  pressure  vessels (2 ) 
0.2445 
ex 7613 00 00 
20 
Aluminium  container,  seamless,  for  compressed  natural  gas  or  compressed  hydrogen, 
0 % 
p/st 
31.12.2023 
02013R1387 
wholly  embedded  in  an  overwrap  of  epoxy-carbon  fibres  composite,  of  a  storage 
capacity  of  172  l  (±  10 %)  and  an  unfilled  weight  of  not  more  than  64  kg 
0.6583 
ex 7616 99 10 
30 
Aluminium  engine  bracket,  with  dimensions  of: 
0 % 
p/st 
31.12.2024 
— 
ex 8708 99 10 
60 
—  height  of  more  than  10  mm  but  not  more  than  200  mm, 
EN — 
ex 8708 99 97 
50 
—  width  of  more  than  10  mm  but  not  more  than  200  mm, 
—  length  of  more  than  10  mm  but  not  more  than  200  mm, 
equipped  with  at  least  two  fixing  holes,  made  of  aluminium  alloys  ENAC-46100  or 
01.07.2020 
ENAC-42100  (based  on  the  norm  EN:1706)  with  following  characteristics: 
—  internal  porosity  not  more  than  1  mm, 
—  outer  porosity  not  more  than  2  mm, 
—  Rockwell  hardness  HRB  10  or  more, 
of  a  kind  used  in  the  production  of  suspensions  systems  for  engines  in  motor  vehicles 
— 
013.001 
▼M13 
— 
0.3928 
ex 7616 99 90 
15 
Honeycomb  aluminium  blocks  for  use  in  the  manufacture  of  aircraft  parts (2 ) 
0 % 
p/st 
31.12.2023 
188
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6534 
ex 7616 99 90 
25 
Metallised  film: 
0 % 
— 
31.12.2024 
—  consisting  of eight  or more layers of aluminium (CAS  RN  7429-90-5)  of a purity  of 
99,8 %  or  more, 
—  with  an  optical  density  of  each  aluminium  layer  of  not  more  than  3.0, 
—  with  each  aluminium  layer  separated  by  a  resin  layer, 
—  on  a  carrier  film  of  PET,  and 
—  on  rolls  of  up  to  50 000  metres  in  length 
0.5357 
ex 7616 99 90 
70 
Connecting  components  for  use  in  the  production  of  helicopter  tail  rotor  shafts (2 ) 
0 % 
p/st 
31.12.2021 
ex 8482 80 00 
10 
ex 8803 30 00 
40 
▼M13 
0.6730 
ex 8101 96 00 
10 
Tungsten  wire  containing  by  weight  99 %  or  more  of  tungsten  with: 
0 % 
— 
31.12.2020 
—  a  maximum  cross-sectional  dimension  of  not  more  than  50  μm, 
—  a  resistance  of  40  Ω  or  more  but  not  more  than  300  Ω  at  length  of  1  m 
02013R1387 
C3 
0.7245 
ex 8101 96 00 
20 
Tungsten  wire 
0 % 
— 
31.12.2022 
—  containing  by  weight  99,95 %  or  more  of  tungsten,  and 
— 
—  with  a  maximum  cross-sectional  dimension  of  not  more  than  1,02  mm 
EN — 
0.5694 
ex 8102 10 00 
10 
Molybdenum  powder  with: 
0 % 
— 
31.12.2022 
—  a  purity  by  weight  of  99 %  or  more,  and 
01.07.2020 
—  a  particle  size  of  1,0  μm  or  more,  but  not  more  than  5,0  μm 
0.6450 
ex 8103 90 90 
10 
Tantalum  sputtering  target  with: 
0 % 
p/st 
31.12.2024 
—  a  copper-chromium  alloy  backing  plate, 
— 
—  a  diameter  of  312  mm,  and 
013.001 
—  a  thickness  of  6,3  mm 
0.5097 
ex 8104 30 00 
35 
Magnesium  powder: 
0 % 
— 
31.12.2020 
— 
—  of  purity  by  weight  of  more  than  99,5 %, 
189
—  with  a  particle  size  of  0,2  mm  or  more  but  not  more  than  0,8  mm 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3417 
ex 8104 90 00 
10 
Ground  and  polished  magnesium  sheets,  of  dimensions  not  more  than  1500  mm  × 
0 % 
— 
31.12.2023 
2000  mm,  coated  on  one  side  with  an  epoxy  resin  insensitive  to  light 
▼M13 
0.5838 
ex 8105 90 00 
10 
Bars  or  wires  made  of  cobalt  alloy  containing  by  weight: 
0 % 
— 
31.12.2023 
—  35 %  (±  2 %)  cobalt, 
—  25 %  (±  1 %)  nickel, 
—  19 %  (±  1 %)  chromium,  and 
—  7 %  (±  2 %)  iron, 
conforming  to  the  material  specifications  AMS  5842 
C3 
0.3416 
ex 8108 20 00 
10 
Titanium  sponge 
0 % 
— 
31.12.2023 
0.4553 
ex 8108 20 00 
30 
Titanium  powder  of  which  90 %  by  weight  or  more  passes  through  a  sieve  with  an 
0 % 
— 
31.12.2023 
aperture  of  0,224  mm 
02013R1387 
0.6942 
ex 8108 20 00 
40 
Titanium  alloy  ingot: 
0 % 
p/st 
31.12.2020 
—  with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3cm 
or  more, 
—  a  weight  of  680  kg  or  more, 
containing  alloy  elements  by  weight  of: 
— 
—  3 %  or  more  but  not  more  than  6 %  of  aluminium, 
—  2,5 %  or  more  but  not  more  than  5 %  of  tin, 
EN — 
—  2,5 %  or  more  but  not  more  than  4,5 %  of  zirconium, 
—  0,2 %  or  more  but  not  more  than  1 %  of  niobium, 
—  0,1 %  or  more  but  not  more  than  1 %  of  molybdenum, 
01.07.2020 
—  0,1 %  or  more  but  not  more  than  0,5 %  of  silicon 
0.6943 
ex 8108 20 00 
55 
Titanium  alloy  ingot: 
0 % 
p/st 
31.12.2020 
—  with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or 
— 
more, 
013.001 
—  a  weight  of  680  kg  or  more, 
containing  alloy  elements  by  weight  of: 
—  3 %  or  more  but  not  more  than  7 %  of  aluminium, 
—  1 %  or  more  but  not  more  than  5 %  of  tin, 
— 
—  3 %  or  more  but  not  more  than  5 %  of  zirconium, 
190
—  4 %  or  more  but  not  more  than  8 %  of  molybdenum 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6944 
ex 8108 20 00 
60 
Titanium  alloy  ingot, 
0 % 
p/st 
31.12.2020 
—  with  a  diameter  of  63,5  cm  or  more  and  a  length  of  450  cm  or  more, 
—  a  weight  of  6 350  kg  or  more, 
containing  alloy  elements  by  weight  of: 
—  5,5 %  or  more  but  not  more  than  6,7 %  of  aluminium, 
—  3,7 %  of  more  but  not  more  than  4,9 %  of  vanadium 
0.7310 
ex 8108 20 00 
70 
Titanium  alloy  slab,  with: 
0 % 
p/st 
31.12.2022 
—  a  height  of  20,3  cm  or  more,  but  not  more  than  23,3  cm, 
—  a  length  of  246,1  cm  or  more,  but  not  more  than  289,6  cm, 
—  a  width  of  40,6  cm  or  more,  but  not  more  than  46,7  cm, 
—  a  weight  of  820  kg  or  more  but  not  more  than  965  kg, 
containing  alloy  elements  by  weight  of: 
—  5,2 %  or  more  but  not  more  than  6,2 %  of  aluminium, 
—  2,5 %  or  more  but  not  more  than  4,8 %  of  vanadium 
02013R1387 
0.3211 
ex 8108 30 00 
10 
Waste  and  scrap  of  titanium  and  titanium  alloys,  except  those  containing  by  weight  1 % 
0 % 
— 
31.12.2023 
or  more  but  not  more  than  2 %  of  aluminium 
0.4363 
ex 8108 90 30 
10 
Titanium  alloy  rods  complying  with  standard  EN  2002-1,  EN  4267  or  DIN  65040 
0 % 
— 
31.12.2024 
— 
EN — 
0.7330 
ex 8108 90 30 
15 
Rods  and  wire  of  an  alloy  of  titanium  with: 
0 % 
— 
31.12.2022 
01.07.2020 
—  a  uniform  solid  cross-section  in  the  form  of  a  cylinder, 
—  with  a  diameter  of  0,8  mm  or  more,  but  not  more  than  5  mm, 
—  an  aluminium  content  by  weight  of  0,3 %  or  more,  but  not  more  than  0,7 %, 
—  a  silicon  content  by  weight  of  0,3 %  or  more,  but  not  more  than  0,6 %, 
—  a  niobium  content  by  weight  of  0,1  or  more,  but  not  more  than  0,3 %,  and 
— 
—  an  iron  content  by  weight  of  not  more  than  0,2 % 
013.001 
0.4904 
ex 8108 90 30 
25 
Titanium-aluminium-vanadium  alloy  (TiAl6V4)  bars,  rods  and  wire,  complying  with 
0 % 
— 
31.12.2020 
— 
AMS  standards  4928,  4965  or  4967 
191
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7077 
ex 8108 90 30 
60 
Forged  cylindrical  bars  of  titanium  with: 
0 % 
p/st 
31.12.2021 
—  a  purity  of  99,995 %  by  weight  or  more, 
—  a  diameter  of  140  mm  or  more  but  not  more  than  200  mm, 
—  a  weight  of  5  kg  or  more  but  not  more  than  300  kg 
0.5351 
ex 8108 90 30 
70 
Wire  of  an  titanium  alloy  containing  by  weight: 
0 % 
— 
31.12.2021 
—  22 %  (±  1 %)  of  vanadium,  and 
—  4 %  (±0,5  %)  of  aluminium, 
or: 
—  15 %  (±  1 %)  of  vanadium, 
—  3 %  (±0,5  %)  of  chromium, 
—  3 %  (±0,5  %  of  tin,  and 
—  3 %  (±0,5  %)  of  aluminium 
0.7285 
ex 8108 90 50 
45 
Cold  or  hot  rolled  plates,  sheets  and  strips  of  non-alloyed  titanium  with: 
0 % 
— 
31.12.2022 
—  a  thickness  of  0,4  mm  or  more,  but  not  more  than  100  mm, 
—  a  length  of  not  more  than  14  m,  and 
—  a  width  of  not  more  than  4  m 
02013R1387 
0.5352 
ex 8108 90 50 
55 
Plates,  sheets,  strip  and  foil  of  an  alloy  of  titanium 
0 % 
— 
31.12.2021 
0.6524 
ex 8108 90 50 
80 
Plates,  sheets,  strips  and  foil  of  non-alloyed  titanium: 
0 % 
— 
31.12.2024 
— 
—  of  a  width  of  more  than  750  mm, 
EN — 
—  of  a  thickness  of  not  more  than  3  mm 
01.07.2020 
0.6500 
ex 8108 90 50 
85 
Strip  or  foil  of  non-alloyed  titanium: 
0 % 
— 
31.12.2024 
—  containing  more  than  0,07 %  by  weight  of  oxygen  (O 2), 
—  of  a  thickness  of  0,4  mm  or  more  but  not  more  than  2,5  mm 
—  conforming  to  the  Vickers  hardness  HV1  standard  of  not  more  than  170, 
— 
of  a  kind  used  in  the  manufacture  of  welded  tubes  for  nuclear  power  plant  condensers 
013.001 
0.7293 
ex 8108 90 60 
30 
Seamless  tubes  and  pipes  of  titanium  or  an  alloy  of  titanium  with: 
0 % 
— 
31.12.2022 
—  a  diameter  of  19  mm  or  more  but  not  more  than  159  mm, 
— 
—  a  wall  thickness  of  0,4  mm  or  more  but  not  more  than  8  mm,  and 
192
—  a  maximum  length  of  18  m 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5353 
ex 8108 90 90 
30 
Parts  of  spectacle  frames  and  mountings,  including 
0 % 
p/st 
31.12.2021 
ex 9003 90 00 
20 
—  temples, 
—  blanks  of  a  kind  used  for  the  manufacture  of  spectacle  parts,  and 
—  bolts  of  the  kind  used  for  spectacle  frames  and  mountings, 
of  a  titanium  alloy 
0.2515 
ex 8109 20 00 
10 
Non-alloy  zirconium  sponges  or  ingots,  containing  by  weight  more  than  0,01 %  of 
0 % 
— 
31.12.2023 
hafnium  for  use  in  the  manufacture  of  tubes,  bars  or  ingots  enlarged  by  remelting  for 
the  chemical  industry (2 ) 
0.3415 
ex 8110 10 00 
10 
Antimony  in  the  form  of  ingots 
0 % 
— 
31.12.2023 
0.3413 
ex 8112 99 30 
10 
Alloy  of  niobium  (columbium)  and  titanium,  in  the  form  of  bars  and  rods 
0 % 
— 
31.12.2023 
0.5354 
ex 8113 00 20 
10 
Cermet  blocks  containing  by  weight  60 %  or  more  of  aluminium  and  5 %  or  more  of 
0 % 
— 
31.12.2023 
02013R1387 
boron  carbide 
0.4316 
ex 8113 00 90 
10 
Carrier  plate  of  aluminium  silicon  carbide  (AlSiC-9)  for  electronic  circuits 
0 % 
— 
31.12.2022 
— 
EN — 
0.6805 
ex 8113 00 90 
20 
Cuboid  spacer made  of  aluminium  silicon carbide (AlSiC) composite  used  for packaging 
0 % 
— 
31.12.2020 
in  IGBT-modules 
01.07.2020 
0.6416 
ex 8207 19 10 
10 
Inserts  for  drilling  tools  with  working  parts  of  agglomerated  diamonds 
0 % 
p/st 
31.12.2024 
— 
▼M13 
013.001 
0.5570 
ex 8207 30 10 
10 
Set  of  transfer  and/or  tandem  press  tools  for  cold-forming,  pressing,  drawing,  cutting, 
0 % 
p/st 
31.12.2022 
— 
punching,  bending,  calibrating,  bordering  and  throating  of  metal  sheets,  for  use  in  the 
manufacture  of  frame  parts  or  body  parts  of  motor  vehicles (2 ) 
193
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7693 
ex 8301 20 00 
10 
Mechanical  or  electromechanical  steering  column  lock: 
0 % 
— 
31.12.2023 
—  with  a  height  of  10,5  cm  (±  3  cm), 
—  with  a  width  of  6,5  cm  (±  3  cm), 
—  in  a  metal  housing, 
—  whether  or  not  with  a  holder, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
▼M13 
0.5024 
ex 8301 60 00 
30 
Silicone  or  plastic  keyboards,  comprising: 
0 % 
p/st 
31.12.2020 
ex 8419 90 85 
40 
—  parts  of  common  metal,  and 
ex 8479 90 70 
30 
—  whether  or  not  comprising  parts  of  plastic, 
ex 8481 90 00 
50 
—  epoxy  resin  reinforced  with  fibreglass  or  wood, 
ex 8503 00 99 
43 
—  whether  or  not  printed  or  surface-treated, 
ex 8515 90 80 
40 
—  with  or  without  electrical  conductors, 
ex 8537 10 98 
55 
—  with  or  without  a  membrane  bonded  to  the  keyboard, 
ex 8538 90 99 
70 
—  with  or  without  mono  or  multilayer  protective  film 
02013R1387 
ex 8708 99 10 
55 
ex 8708 99 97 
22 
C3 
— 
EN — 
0.6954 
ex 8302 20 00 
20 
Castors,  with: 
0 % 
p/st 
31.12.2020 
01.07.2020 
—  an  external  diameter  of  21  mm  or  more  but  not  more  than  23  mm, 
—  a  width  with  screw  of  19  mm  or  more  but  not  more  than  23  mm, 
—  a  U-shaped  plastic  outer  ring, 
—  an  assembly  screw  fitted  to  the  internal  diameter  and  used  as  an  inner  ring 
— 
013.001 
0.7666 
ex 8302 30 00 
10 
Support  bracket  for  an  exhaust  system: 
0 % 
— 
31.12.2023 
—  with  a  thickness  of  0,7  mm  or  more  but  not  more  than  1,3  mm, 
—  of  stainless  steel  class  1.4310  and  1.4301  according  to  norm  EN  10088, 
— 
—  whether  or  not  with  mounting  holes, 
for  use  in  the  manufacture  of  exhaust  systems  for  automobiles (2 ) 
194
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2602 
ex 8309 90 90 
10 
Aluminium  can  ends: 
0 % 
p/st 
31.12.2023 
—  with  a  diameter  of  99,00  mm  or  more  but  not  more  than  136,5  mm  (±1mm), 
—  whether  or  not  with  a  'ring-pull'  aperture 
0.3947 
ex 8401 30 00 
20 
Non-irradiated  hexagonal  fuel  modules  (elements)  for  use  in  nuclear  reactors (2 ) 
0 % 
— 
31.12.2023 
0.6319 
ex 8401 40 00 
10 
Stainless  steel  absorber  control  rods,  filled  with  neutron  absorbing  chemical  elements 
0 % 
p/st 
31.12.2024 
0.3830 
ex 8407 33 20 
10 
Spark-ignition  reciprocating  or  rotary  internal  combustion  piston  engines,  having  a 
0 % 
— 
31.12.2022 
ex 8407 33 80 
10 
cylinder  capacity  of  not  less  than  300  cm3  and  a  power  of  not  less  than  6  kW  or 
ex 8407 90 80 
10 
more  but  not  more  than  20,0  kW,  for  the  manufacture  of: 
ex 8407 90 90 
10 
—  lawn  mowers  of  subheadings  8433 11,  8433 19  and  8433 20, 
—  tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn 
mower, 
02013R1387 
—  four  stroke  mowers  with  motor  of  a  cylinder  capacity  of  not  less  than  300  cm3  of 
subheading  8433 20 10,  or 
—  snowploughs  and  snow  blowers  of  subheading  8430 20 (2 ) 
— 
0.3828 
ex 8407 90 10 
10 
Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the 
0 % 
— 
31.12.2021 
EN — 
manufacture  of  garden  equipment  of  heading  8432,  8433,  8436  or  8508 (2 ) 
01.07.2020 
0.4996 
ex 8407 90 90 
20 
Compact  Liquid  Petroleum  Gas  (LPG)  Engine  System,  with: 
0 % 
— 
31.12.2020 
—  6  cylinders, 
—  an  output  of  75  kW  or  more,  but  not  more  than  80  kW, 
—  inlet and exhaust valves modified to operate continuously in heavy duty applications, 
— 
for  use  in  the  manufacture  of  vehicles  of  heading  8427 (2 ) 
013.001 
0.2598 
ex 8408 90 41 
20 
Diesel engines  of a  power  of not  more than  15  kW,  with 2 or  3 cylinders, for use in  the 
0 % 
— 
31.12.2023 
— 
manufacture  of  vehicle  mounted  temperature  control  systems (2 ) 
195
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2595 
ex 8408 90 43 
20 
Diesel  engines  of  a  power  of  not  more  than  30  kW,  with  4  cylinders,  for  use  in  the 
0 % 
— 
31.12.2023 
manufacture  of  vehicle  mounted  temperature  control  systems (2 ) 
0.5544 
ex 8408 90 43 
40 
4  Cylinder,  4  cycle,  liquid  cooled,  compression-ignition  engine  having: 
0 % 
— 
31.12.2022 
ex 8408 90 45 
30 
—  a  capacity  of  not  more  than  3 850  cm3 ,  and 
ex 8408 90 47 
50 
—  a  rated  output  of  15  kW  or  more  but  not  more  than  85  kW, 
for  use  in  the  manufacture  of  vehicles  of  heading  8427 (2 ) 
0.7027 
ex 8409 91 00 
40 
Fuel  injector  with  solenoid  valve  for  optimized  atomization  in  the  combustion  chamber 
0 % 
— 
31.12.2021 
for use  in  the  manufacture  of  spark-ignition  internal combustion  piston  engines  of  motor 
vehicles (2 ) 
0.6752 
ex 8409 91 00 
50 
Exhaust  manifold  with  turbine  housing  of  turbochargers  with: 
0 % 
p/st 
31.12.2023 
ex 8409 99 00 
55 
—  a  heat-resistance  of  not  more  than  1 050  °C,  and 
—  a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, 
but  not  more  than  181  mm 
▼M13 
02013R1387 
0.7670 
ex 8409 91 00 
25 
Air  intake  module  for  engine  cylinders  consisting  of: 
0 % 
— 
31.12.2023 
—  a  suction  pipe, 
—  a  pressure  sensor, 
—  an  electric  throttle, 
—  hoses, 
— 
—  brackets, 
EN — 
for  use  in  the  manufacture  of  engines  of  motor  vehicles (2 ) 
01.07.2020 
C3 
0.7661 
ex 8409 91 00 
70 
Inlet  manifold,  exclusively  for  use  in  the  manufacture  of  the  motor  vehicles  with: 
0 % 
— 
31.12.2023 
—  a  width  of  40  mm  or  more  but  not  more  than  70  mm, 
—  valves  length  of  250  mm  or  more  but  not  more  than  350  mm, 
— 
—  air  volume  of  5,2  litres,  and 
013.001 
—  an  electrical  flow  control  system  that  provides  maximum  performance  at  more  than 
3200  rpm (2 ) 
— 
0.5199 
ex 8409 99 00 
10 
Injectors with solenoid valve for optimised atomisation in the engine combustion chamber 
0 % 
p/st 
31.12.2021 
196
ex 8479 90 70 
85 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7851 
ex 8409 99 00 
25 
Hoses  assembly  for  fuel  return  from  injectors  to  engine  fuel  unit,  consisting  of  at  least: 
0 % 
— 
31.12.2024 
—  three  rubber  hoses,  whether  or  not  with  a  protective  braided  sleeving, 
—  three  connectors  for  connecting  fuel  injectors, 
—  five  metal  clamps, 
—  one  T-shaped  plastic  joint, 
for  use  in  the  manufacture  of  engines  of  motor  vehicles (2 ) 
C3 
0.7160 
ex 8409 99 00 
40 
Plastic  or  aluminium  cylinder  head  cover  with: 
0 % 
p/st 
31.12.2021 
—  a  camshaft  position  sensor  (CMPS), 
—  metal  brackets  for  mounting  on  an  engine,  and 
—  two  or  more  gaskets, 
for  use  in  the  manufacture  of  engines  of  motor  vehicles (2 ) 
0.7236 
ex 8409 99 00 
60 
Intake  manifold  for  air  supply  to  the  engine  cylinders,  comprising  at  least: 
0 % 
— 
31.12.2022 
—  a  throttle, 
—  a  boost  pressure  sensor, 
for  use  in  the  manufacture  of  compression  ignition  engines  of  motor  vehicles (2 ) 
02013R1387 
0.7667 
ex 8409 99 00 
65 
The  exhaust  gas  recirculation  assembly  consisting  of: 
0 % 
— 
31.12.2023 
—  a  control  unit, 
—  an  air  throttle, 
—  an  intake  pipe, 
— 
—  an  outlet  hose, 
EN — 
for  use  in  the  manufacture  of  diesel  engines  of  motor  vehicles (2 ) 
0.7234 
ex 8409 99 00 
70 
Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not 
0 % 
— 
31.12.2021 
01.07.2020 
more  than  HRC  50  for  use  in  the  manufacture  of  compression  ignition  engines  of  motor 
vehicles (2 ) 
▼M13 
— 
0.7718 
ex 8409 99 00 
75 
High  pressure  fuel  rail  of  galvanised  ferrite-pearlite steel  with: 
0 % 
— 
31.12.2024 
013.001 
—  at  least  one  pressure  sensor  and  one  valve, 
—  a  length  of  314  mm  or  more,  but  not  more  than  322  mm, 
—  an  operating  pressure  not  more  than  225  MPa, 
—  an  inlet  temperature  not  more  than  95  °C, 
— 
—  ambient  temperature  of  –  45  °C  or  more,  but  not  more  than  145  °C, 
197
for  use  in  the  manufacture  of  compression  ignition  engines  of  motor  vehicles (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7233 
ex 8409 99 00 
80 
High  pressure  oil  jet  nozzle  for  engine  piston  cooling  and  lubrication  with: 
0 % 
— 
31.12.2022 
—  an  opening  pressure  of  1  bar  or  more,  but  not  more  than  3  bar, 
—  a  closing  pressure  of  more  than  0,7  bar, 
—  a  one-way  valve, 
for  use  in  the  manufacture  of  compression  ignition  engines  of  motor  vehicles (2 ) 
0.7716 
ex 8409 99 00 
85 
Turbocharger  cooling  duct  containing: 
0 % 
— 
31.12.2024 
—  an  aluminum  alloy  duct  with  at  least  one  metal  holder  and  at  least  two  mounting 
holes, 
—  a  rubber  pipe  with  clips, 
—  a  stainless  steel  flange  highly  resistant  to  corrosion  [SUS430JIL], 
for  use  in  the  manufacture  of  compression  ignition  engines  of  motor  vehicles (2 ) 
0.6751 
ex 8411 99 00 
20 
Wheel-shaped  gas  turbine  component  with  blades,  of  a  kind  used  in  turbochargers: 
0 % 
p/st 
31.12.2022 
—  of  a  precision-cast  nickel  based  alloy  complying  with  standard  DIN  G- 
NiCr13Al6MoNb  or  DIN  G-  NiCr13Al16MoNb  or  DIN  G-  NiCo10W10Cr9AlTi 
02013R1387 
or  DIN  G-  NiCr12Al6MoNb  or  AMS  AISI:686, 
—  with  a  heat-resistance  of  not  more  than  1 100  °C, 
—  with  a  diameter  of  28  mm  or  more,  but  not  more  than  180  mm, 
—  with  a  height  of  20  mm  or  more,  but  not  more  than  150  mm 
— 
EN — 
0.7225 
ex 8411 99 00 
30 
Turbine  housing  of  turbochargers  with: 
0 % 
p/st 
31.12.2021 
—  a  heat-resistance  of  not  more  than  1 050  °C,  and 
01.07.2020 
—  a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, 
but  not  more  than  181  mm 
— 
0.5975 
ex 8412 39 00 
20 
Actuator  for  a  single-stage  turbocharger: 
0 % 
p/st 
31.12.2023 
013.001 
—  whether  or  not  with  conducting  horns  and  connecting  sleeves,  having  an  operating 
distance  of  20  mm  or  more  but  not  more  than  40  mm, 
—  with  a  length  of  not  more  than  350  mm, 
—  with  a  diameter  of  not  more  than  75  mm, 
— 
—  with  a  height  of  not  more  than  110  mm 
198
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7161 
ex 8413 30 20 
30 
Single-cylinder  radial-piston  high  pressure  pump  for  gasoline  direct  injection  with: 
0 % 
— 
31.12.2021 
—  an  operating  pressure  of  200  bar  or  more,  but  not  more  than  350  bar, 
—  a  flow  control,  and 
—  a  pressure  relief  valve, 
for  use  in  the  manufacture  of  engines  of  motor  vehicles (2 ) 
0.4903 
ex 8413 70 35 
20 
Single  phase  centrifugal  pump: 
0 % 
— 
31.12.2020 
—  discharging  at  least  400  cm3  fluid  per  minute, 
—  with  a  noise  level  limited  to  6  dBA, 
—  with the inside diameter of the suction opening and discharge outlet of not more than 
15  mm,  and 
—  working  at  ambient  temperatures  down  to  -10  °C 
0.6346 
ex 8413 91 00 
30 
Fuel  pump  cover: 
0 % 
p/st 
31.12.2024 
—  consisting  of  aluminium  alloys, 
—  with  a  diameter  of  38  mm  or  50  mm, 
02013R1387 
—  with  two  concentric,  annular  grooves  formed  on  its  surface, 
—  anodized, 
of  a  kind  used  in  motor  vehicles  with  petrol  engines 
— 
0.7669 
ex 8414 10 25 
30 
Tandem  pump  consisting  of: 
0 % 
— 
31.12.2023 
EN — 
—  an  oil  pump  with  displacement  of  21,6  cc/rev (± 2  cc/rev) and  working  pressure 1,5 
bar  at  1 000  revolutions  per  minute, 
—  vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 
01.07.2020 
mbar  in  6  seconds  at  750  revolutions  per  minute, 
for  use  in  the  manufacture  of  engines  of  motor  vehicles (2 ) 
— 
0.7691 
ex 8414 10 89 
30 
Electric  vacuum  pump  with: 
0 % 
— 
31.12.2023 
013.001 
—  Controller  Area  Network  (CAN  bus), 
—  whether  or  not  with  a  rubber  hose, 
—  a  connecting  cable  with  connector, 
—  a  mounting  bracket, 
— 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
199
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4727 
ex 8414 30 81 
50 
Hermetic  or  semi-hermetic  variable-speed  electric  scroll  compressors,  with  a  nominal 
0 % 
— 
31.12.2024 
power  rating  of  0,5  kW  or  more  but  not  more  than  10  kW,  with  a  displacement 
volume  of  not  more  than  35  cm3 ,  of  the  type  used  in  refrigeration  equipment 
0.6160 
ex 8414 30 81 
60 
Hermetic  rotary  compressors  for  Hydro-Fluoro-Carbon  (HFC)  refrigerants: 
0 % 
— 
31.12.2023 
ex 8414 80 73 
30 
—  driven  by  'on-off'  single  phase  alternate  current  (AC)  or  'brushless  direct  current' 
(BLDC)  variable  speed  motors, 
—  with  a  nominal  power  rating  of  not  more  than  1,5  kW, 
of  a  kind  used  in  the  production  of  household  heat  pump  laundry  tumble  dryers 
0.2593 
ex 8414 30 89 
20 
Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor 
0 % 
— 
31.12.2023 
of  a  power  of  more  than  0,4  kW  but  not  more  than  10  kW 
0.7694 
ex 8414 30 89 
30 
Open  shaft,  scroll  type  compressor  with  clutch  assembly,  of  a  power  of  more  than  0,4 
0 % 
— 
31.12.2023 
02013R1387 
kW,  for  air  conditioning  in  vehicles,  for  use  in  the  manufacture  of  motor  vehicles  of 
Chapter  87 (2 ) 
0.4891 
ex 8414 59 25 
40 
Axial  fan  with  an  electric  motor,  of  an  output  of  not  more  than  2  W,  for  use  in  the 
0 % 
— 
31.12.2020 
— 
manufacture  of  products  of  heading  8521  or  8528 (2 ) 
EN — 
01.07.2020 
0.7595 
ex 8414 59 35 
20 
Radial  fan,  with: 
0 % 
— 
31.12.2023 
—  a  dimension  of  25mm  (height)  x  85mm  (width)  x  85mm  (depth), 
—  a  weight  of  120  g, 
—  a  rated  voltage  of  13,6  VDC  (direct  current  voltage), 
—  an  operating  voltage  of  9  VDC  or  more  but  not  more  than  16  VDC  (direct  current 
— 
voltage), 
013.001 
—  a  rated  current  of  1,1  A  (TYP), 
—  a  rated  power  of  15  W, 
—  a  rotation  speed  of  500  RPM  (revolutions  per  minute)  or  more  but  not  more  than 
4800  RPM  (revolutions  per  minute)  (free  flow), 
— 
—  an  air  flow  of  not  more  than  17,5  litre/s, 
200
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
—  an  air  pressure  of  not  more  than  16  mm  H 2O  ≈  157  Pa, 
—  an  overall sound  pressure of  not  more  than  58  dB(A)  at 4800  RPM  (revolutions  per 
minute),  and 
a  FIN  (Fan  Interconnect  Network)  interface for  communication  with  the  heating  and  air- 
conditioning  control  unit  used  in  car  seat  ventilation  systems 
0.7317 
ex 8414 80 22 
20 
Air  membrane  compressor  with: 
0 % 
— 
31.12.2022 
ex 8414 80 80 
20 
—  a  flow  of  4,5  l/min  or  more,  but  not  more  than  7  l/min, 
—  power  input  of  not  more  than  8,1  W,  and 
—  a  gauge  pressure  capacity  not  exceeding  400  hPa  (0,4  bar), 
of  a  kind  used  in  the  production  of  motor  vehicle  seats 
0.2507 
ex 8414 90 00 
20 
Aluminium  pistons,  for  incorporation  into  compressors  of  air  conditioning  machines  of 
0 % 
p/st 
31.12.2024 
motor  vehicles (2 ) 
0.3386 
ex 8414 90 00 
30 
Pressure-regulating  system,  for  incorporation  into  compressors  of  air  conditioning 
0 % 
p/st 
31.12.2023 
machines  of  motor  vehicles (2 ) 
02013R1387 
0.4027 
ex 8414 90 00 
40 
Drive  part,  for  compressors  of  air  conditioning  machines  of  motor  vehicles (2 ) 
0 % 
p/st 
31.12.2023 
— 
EN — 
0.6841 
ex 8415 90 00 
30 
Aluminium  arc-welded  removable  receiver  dryer  with  a  connection  block,  containing 
0 % 
p/st 
31.12.2020 
polyamide  and  ceramic  elements,  with: 
—  a  length  of  166  mm  (+/-  1  mm), 
01.07.2020 
—  a  diameter  of  70  mm  (+/-  1  mm), 
—  an  internal  capacity  of  280  cm3  or  more, 
—  a  water  absorption  rate  of  17  g  or  more,  and 
—  an internal purity expressed by permissible amount of impurities of not more than 0,9 
mg/dm2 , 
— 
of  a  kind  used  in  car  air-conditioning  systems 
013.001 
0.6842 
ex 8415 90 00 
40 
Flame-soldered  aluminium  block  with  extruded,  bent  connector  lines,  of  a  kind  used  in 
0 % 
p/st 
31.12.2020 
— 
car  air-conditioning  systems 
201
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6860 
ex 8415 90 00 
55 
Aluminium  arc-welded  removable  receiver  dryer  with  polyamide  and  ceramic  elements 
0 % 
p/st 
31.12.2020 
with: 
—  a  length  of  143  mm  or  more  but  not  more  than  292  mm, 
—  a  diameter  of  31  mm  or  more  but  not  more  than  99  mm, 
—  a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, 
and 
—  a  solid  particle  diameter  of  not  more  than  0,06  mm, 
of  a  kind  used  in  car  air-conditioning  systems 
0.4133 
ex 8418 99 10 
70 
Evaporator  made  of  aluminium  for  use  in  the  manufacture  of  air  conditioning  machines 
0 % 
p/st 
31.12.2021 
for  automobiles (2 ) 
0.6231 
ex 8421 21 00 
20 
Water pre-treatment system comprising one or more of the following elements, whether or 
0 % 
p/st 
31.12.2024 
not  incorporating  modules  for  sterilization  and  sanitization  of  these  elements: 
—  ultrafiltration  system, 
—  carbon  filtration  system, 
—  water  softener  system, 
for  use  in  a  biopharmaceutical  laboratory 
02013R1387 
0.3375 
ex 8421 99 90 
91 
Parts  of  equipment,  for  the  purification  of  water  by  reverse  osmosis,  consisting  of  a 
0 % 
p/st 
31.12.2023 
bundle  of  hollow  fibres  of  artificial  plastic  material  with  permeable  walls,  embedded  in 
a  block  of  artificial  plastic  material  at  one  end  and  passing  through  a  block  of  artificial 
— 
plastic  material  at  the  other  end,  whether  or  not  housed  in  a  cylinder 
EN — 
0.7039 
ex 8424 89 70 
20 
Mechanical  passenger  car  headlights  washer  with  telescopic  hose,  high  pressure  nozzles 
0 % 
— 
31.12.2021 
01.07.2020 
and  mounting  clamps  for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.5831 
ex 8431 20 00 
30 
Drive  axle  assembly  containing  differential,  reduction  gears,  crown  wheel,  drive  shafts, 
0 % 
p/st 
31.12.2022 
wheel  hubs,  brakes  and  mast  mounting  arms  for  use  in  the  manufacture  of  vehicles  in 
— 
heading  8427 (2 ) 
013.001 
0.6193 
ex 8431 20 00 
40 
Aluminium  core,  plastic  tank  radiator,  with  integral  steel  support  structure  and  an  open 
0 % 
p/st 
31.12.2023 
— 
core square wave  design  of 9  fins per 2,54  cm  of  core length  for use  in the  manufacture 
of  vehicles  of  heading  8427 (2 ) 
202
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6821 
ex 8436 99 00 
10 
Part  containing: 
0 % 
p/st 
31.12.2020 
—  a  single-phase  AC  motor, 
—  an  epicyclic  gearing, 
—  a  cutter  blade, 
and  whether  or  not  containing: 
—  a  capacitor, 
—  a  part  fitted  with  a  threaded  bolt, 
for  use  in  the  manufacture  of  garden  shredders (2 ) 
0.3374 
ex 8439 99 00 
10 
Suction-roll shells, produced  by  centrifugal casting,  not  drilled, in  the form of alloy-steel 
0 % 
p/st 
31.12.2023 
tubes,  of  a  length  of  3 000  mm  or  more  and  an  external  diameter  of  550  mm  or  more 
0.2599 
ex 8477 80 99 
10 
Machines  for  casting  or  for  surface  modification  of  plastic  membranes  of  heading  3921 
0 % 
p/st 
31.12.2023 
02013R1387 
0.7517 
ex 8479 89 97 
35 
Mechanical  unit  ensuring  the  movement  of  the  camshaft  with: 
0 % 
— 
31.12.2023 
—  8  oil  chambers, 
—  a  phasing  range  of  at  least  38°,  but  not  more  than  62°, 
—  a  steel  and/or  steel  alloy  sprocket, 
— 
—  a  steel  and/or  steel  alloy  rotor 
EN — 
01.07.2020 
0.6230 
ex 8479 89 97 
60 
Bioreactor  for  biopharmaceutical  cell  culture: 
0 % 
p/st 
31.12.2021 
—  having  interior  surfaces  of  austenitic  stainless  steel,  and 
—  with  a  process  capacity  up  to  15 000  litres, 
—  whether  or  not  combined  with  a  'clean-in-process'  system  and/or  a  dedicated  paired 
— 
media  hold  vessel 
013.001 
0.6573 
ex 8479 89 97 
70 
Machine  to  accurately  align  and  attach  lenses  into  a  camera  assembly  in  five  axis 
0 % 
p/st 
31.12.2024 
— 
alignment  capability  and  fix  them  in  position  with  a  two  part  cure  epoxy 
203
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6735 
ex 8479 89 97 
85 
High  Pressure  Hard  Materials  Compression  Press  ('Link  Press'): 
0 % 
p/st 
31.12.2020 
—  with  a  16 000  tonne  pressure  rating, 
—  with  a  1 100mm  diameter  Bolster  (±  1mm), 
—  with  a  1 400mm  main  cylinder  (±  1mm), 
—  with  a  Fixed  and  floating  link  frame,  multiple  pump  high  pressure  hydraulic 
accumulator  and  pressure  system, 
—  with a double arm manipulator arrangement and connections for piping and electrical 
systems, 
—  with  a  total  weight  310  tonnes  (±  10  tonnes),  and 
—  creating 30 000 atmospheres at 1 500 degrees centigrade using Low Frequency Alter­
nating  Current  (16 000  amps) 
0.7158 
ex 8479 90 70 
87 
Fuel  hose  for  internal  combustion  piston  engines  with  a  fuel  temperature  sensor,  with  at 
0 % 
p/st 
31.12.2021 
least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor 
vehicles (2 ) 
0.7375 
ex 8481 10 99 
20 
Electromagnetic  pressure  reducing  valve: 
0 % 
— 
31.12.2022 
—  with  a  plunger, 
—  with  at  least  275  mPa  internal  tightness, 
—  with  a  plastic  connector  with  2  silver  or  tin  pins 
02013R1387 
0.7424 
ex 8481 10 99 
40 
Pressure  reducing  valves  in  a  brass  case  with: 
0 % 
— 
31.12.2022 
—  a  length  of  not  more  than  30  mm  (±  1  mm), 
—  a  width  of  not  more  than  18  mm  (±  1  mm), 
of  a  kind  used  for  incorporation  in  fuel  delivery  modules  of  motor  vehicles 
0.4668 
ex 8481 30 91 
91 
Steel  check  (non-return)  valves  with: 
0 % 
p/st 
31.12.2024 
— 
—  an  opening  pressure  of  not  more  than  800  kPa, 
EN — 
—  an  external  diameter  not  more  than  37  mm 
▼M13 
01.07.2020 
0.7850 
ex 8481 30 99 
30 
Brake  booster  check  valve  assembly,  containing  at  least: 
0 % 
— 
31.12.2024 
—  three  vulcanized  rubber  hoses, 
—  one  membrane  valve, 
—  two  metal  clamps, 
— 
—  one  metal  holder, 
—  whether  or  not  a  connecting  metal  pipe, 
013.001 
for  use  in  the  manufacture  of  motor  vehicles (2 ) 
C3 
— 
0.3363 
ex 8481 80 59 
10 
Air control valve, consisting of a stepping motor and  a valve pintle, for the regulation of 
0 % 
p/st 
31.12.2023 
204
idle  air  flow  in  fuel  injection  engines 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7155 
ex 8481 80 59 
20 
Pressure  regulating  valve  for  incorporation  into  compressors  of  motor  vehicle  air 
0 % 
p/st 
31.12.2021 
condition  units (2 ) 
0.7380 
ex 8481 80 59 
30 
Two-way  flow  control  valve  with  housing,  with: 
0 % 
— 
31.12.2022 
—  at least 5, but not more than 10 outlet holes with at least 0,09 mm, but not more than 
0,2  mm  diameter, 
—  at  least  550  cm3 /minute,  but  not  more  than  2000  cm3 /minute  flow  rate, 
—  at  least  19,  but  not  more  than  300  MPa  operating  pressure 
▼M13 
0.7377 
ex 8481 80 59 
40 
Flow-control  valve: 
0 % 
— 
31.12.2022 
—  made  of  steel, 
—  with an outlet hole with a diameter of 0,05  mm or more, but not more than 0,5  mm, 
—  with  an  inlet  hole  with  a  diameter  of  0,1  mm  or  more,  but  not  more  than  1,3  mm, 
—  with  chromium  nitride  coating, 
—  with  a  surface  roughness  of  Rp  0,4 
0.7381 
ex 8481 80 59 
50 
Electromagnetic  valve  for  quantity  control  with: 
0 % 
— 
31.12.2022 
02013R1387 
—  a  plunger, 
—  a  solenoid  with  a  of  coil  resistance  of  1,85  Ω  or  more,  but  not  more  than  8,2  Ω 
C3 
— 
0.7382 
ex 8481 80 59 
60 
Electromagnetic  valve  for  quantity  control: 
0 % 
— 
31.12.2022 
EN — 
—  with  a  solenoid  with  a  coil  resistance  of  at  least  0,19  Ohm,  but  not  more  than  0,66 
Ohm,  and  with  an  inductance  of  not  more  than  1  mH 
01.07.2020 
0.5575 
ex 8481 80 69 
60 
Four-way  reversing  valve  for  refrigerants,  consisting  of: 
0 % 
p/st 
31.12.2022 
—  a  solenoid  pilot  valve, 
—  a  brass  valve  body  including  valve  slider  and  copper  connections, 
with  a  working  pressure  up  to  4,5  MPa 
— 
013.001 
0.7519 
ex 8481 80 73 
20 
Pressure-  and  flow-control  valve  controlled  by  external  electromagnet: 
0 % 
— 
31.12.2023 
ex 8481 80 99 
70 
—  made  of  steel  and/or  steel  alloy(s), 
—  without  integrated  circuit, 
—  of  not  more  than  1000  kPa  operating  pressure, 
— 
—  with  a  flow  quantity  of  not  more  than  5  l/min, 
205
—  without  an  electromagnet 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7637 
ex 8481 80 79 
30 
Service  Valve  which  suits  for  R410A  or  R32  gas  while  connecting  indoor  and  outdoor 
0 % 
— 
31.12.2023 
ex 8481 80 99 
30 
units  with: 
—  a  withstanding  pressure  of  the  valve  body  of  6,3  MPa, 
—  a  leakage  ratio  of  less  than  1,6  g/a, 
—  an  impurity  ratio  of  less  than  1,2  mg/PCS, 
—  an  airtight  pressure  of  the  valve  body  of  4,2  MPa, 
for  use  in  the  manufacture  of  air  conditioners (2 ) 
0.7518 
ex 8481 90 00 
40 
Valve  armature: 
0 % 
— 
31.12.2023 
—  for  the  opening  and  closing  of  the  flow  of  fuel, 
—  consisting  of  a  shaft  and  a  blade, 
—  with  8  holes  on  the  blade, 
—  made  of  metal  and/or  metal  alloy(s) 
0.6391 
ex 8482 10 10 
10 
Ball  and  cylindrical  bearings: 
0 % 
p/st 
31.12.2024 
ex 8482 10 90 
10 
—  with  an  outside  diameter  of  28  mm  or  more  but  not  more  than  140  mm, 
ex 8482 50 00 
10 
—  with an operational thermal stress of more than 150  °C  at a working  pressure of not 
more  than  14  MPa, 
02013R1387 
for  the  manufacture  of  machinery  for  the  protection  and  control  of  nuclear  reactors  in 
nuclear  power  plants (2 ) 
0.7735 
ex 8482 10 10 
15 
Ball  bearings  with: 
0 % 
— 
31.12.2024 
— 
—  an  internal  diameter  of  4  mm  or  more  but  not  more  than  9  mm, 
EN — 
—  an  external  diameter  of  not  more  than  26  mm, 
—  a  width  of  not  more  than  8  mm, 
for use  in  the  manufacture of  electromotors with  a  range  of  40 000  rpm  or  more  but  not 
01.07.2020 
more  than  80 000  rpm (2 ) 
0.7707 
ex 8482 10 10 
25 
Double  row  ball  bearings  /  ball  bearing  cartridges: 
0 % 
— 
31.12.2024 
ex 8482 10 90 
40 
—  with  an  internal  diameter  of  3  mm  or  more,  but  not  more  than  9  mm, 
— 
—  with  an  external  diameter  of  17  mm  or  more,  but  not  more  than  36  mm, 
013.001 
—  with  a  width  of  6  mm  or  more,  but  not  more  than  69  mm, 
—  manufactured  according  to  ISO  standard  492  -  Class  5  or  DIN  620  -  P5  or  ANSI 
Standard  20  -  ABEC  5, 
— 
—  with  ceramic  balls, 
for  use  in  turbo  compressors  (turbochargers) (2 ) 
206
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5744 
ex 8483 30 32 
30 
Bearing  housing  of  a  kind  used  in  turbochargers: 
0 % 
p/st 
31.12.2022 
ex 8483 30 38 
60 
—  of precision-cast grey  cast iron complying  with  standard DIN  EN  1561  or  precision- 
cast  ductile  cast  iron  complying  with  DIN  EN  1560, 
—  with  oil  chambers, 
—  without  bearings, 
—  with  a  diameter  of  50  mm  or  more,  but  not  more  than  250  mm, 
—  with  a  height  of  40  mm  or  more,  but  not  more  than  150  mm, 
—  whether  or  not  with  water  chambers  and  connectors 
0.5202 
ex 8483 40 29 
50 
Gear  set  of  cycloid  gear  type  with: 
0 % 
p/st 
31.12.2021 
—  a  rated  torque  of  50  Nm  or  more  but  not  more  than  9 000  Nm, 
—  standard  ratios  of  1:50  or  more  but  not  more  than  1:475, 
—  lost  motion  of  not  more  than  one  arc  minute, 
—  an  efficiency  of  more  than  80 %, 
of  a  kind  used  in  robot  arms 
02013R1387 
0.5977 
ex 8483 40 29 
60 
Epicyclic  gearing,  of  a  kind  used  in  driving  hand-held  power  tools  with: 
0 % 
p/st 
31.12.2023 
—  a  rated  torque  of  25  Nm  or  more,  but  not  more  than  70  Nm, 
—  standard  gear  ratios  of  1:12.7  or  more,  but  not  more  than  1:64.3 
— 
EN — 
0.2503 
ex 8483 40 51 
20 
Gear  box,  having  a  differential  with  wheel  axle,  for  use  in  the  manufacture  of  self- 
0 % 
p/st 
31.12.2023 
propelled  lawnmowers  with  a  seat  of  subheading  8433 11 51 (2 ) 
01.07.2020 
▼M13 
— 
013.001 
0.7920 
ex 8483 40 59 
30 
Hydrostatic  speed  changer: 
0 % 
p/st 
31.12.2024 
—  with  a  hydro  pump  and  a  differential  with  wheel  axle, 
—  whether  or  not  with  a  fan  impeller  and/or  a  pulley, 
for use in the manufacture of lawn mowers of Subheadings 8433 11 and 8433 19 or other 
— 
mowers  of  Subheading  8433 20 (2 ) 
207
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13  _____ 
C3 
0.7249 
ex 8483 40 90 
20 
Hydrostatic  transmission  with: 
0 % 
p/st 
31.12.2022 
—  measurements  (without  shafts)  of  not  more  than  154  mm  x  115  mm  x  108  mm, 
—  a  weight  of  not  more  than  3,3  kg, 
—  a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 
3200  rpm, 
—  a  torque  of  the  output  shaft  of  not  more  than  10,4  Nm, 
—  a  rotation  speed  of  the  output  shaft  of  not  more  than  930  rpm  at  2800  rpm  input 
speed,  and 
—  an  operating  temperature  range  of  -5  °C  or  more,  but  not  more  than  +40  °C 
for  use  in  the  manufacture  of  hand-operated  lawn  mowers  of  subheading  8433 11 90 (2 ) 
0.7248 
ex 8483 40 90 
30 
Hydrostatic  transmission  with: 
0 % 
p/st 
31.12.2022 
—  a  reduction  of  20,63:1  or  more,  but  not  more  than  22,68:1, 
02013R1387 
—  an  input  speed  of  1800  rpm  or  more  when  loaded  and  of  not  more  than  3 000  rpm 
when  unloaded, 
—  a  continuous  output  torque  of  142  Nm  or  more,  but  not  more  than  156  Nm, 
—  an  intermittent  output  torque  of  264  Nm  or  more,  but  not  more  than  291  Nm,  and 
—  an  axle  shaft  diameter  of  19,02  mm  or  more,  but  not  more  than  19,06  mm, 
— 
—  whether  or  not  equipped  with  a  fan  impeller  or  with  a  pulley  with  integrated  fan 
EN — 
impeller, 
for  use  in  the  production  of  self-propelled  lawn  mowers  with  a  seat  of  subheading 
8433 11 51,  and  tractors  of  subheading  8701 91 90,  whose  main  function  is  that  of  a 
01.07.2020 
lawn  mower (2 ) 
0.4997 
ex 8483 40 90 
80 
Transmission  gearbox,  with: 
0 % 
p/st 
31.12.2020 
—  not  more  than  3  gears, 
— 
—  an  automatic  deceleration  system,  and 
013.001 
—  a  power  reversal  system, 
for  use  in  the  manufacture  of  goods  of  heading  8427 (2 ) 
— 
0.7156 
ex 8484 20 00 
10 
Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture 
0 % 
p/st 
31.12.2021 
208
of  motor  vehicle  air  condition  units (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7604 
ex 8484 20 00 
20 
Mechanical  face  sealing  device  made  of  two  movable  rings  (one  ceramic  mating  with  a 
0 % 
— 
31.12.2023 
thermal conductivity lower than 80 W/mK and the other carbon sliding), one spring and a 
nitrile  sealant  on  the  external  side 
C3 
0.6854 
ex 8501 10 10 
20 
Synchronous  motor  for  a  dishwasher  with  a  water  flow  control  mechanism  with: 
0 % 
— 
31.12.2020 
—  a  length  without  axle  of  24  mm  (+/-  0,3), 
—  a  diameter  of  49,3  mm  (+/-  0,3), 
—  a  rated  voltage  of  220  V  AC  or  more  but  not  more  than  240  V  AC, 
—  a  rated  frequency  of  50  Hz  or  more  but  not  more  than  60  Hz, 
—  an  input  power  of  not  more  than  4  W, 
—  a  rotation  speed  of  4rpm  or  more  but  not  more  than  4,8  rpm, 
—  an  output  torque  of  not  less  than  10  kgf/cm 
0.7601 
ex 8501 10 10 
30 
Motors  for  air  pumps,  with: 
0 % 
— 
31.12.2023 
—  operating  voltage  of  9  VDC  or  more  but  not  more  than  24  VDC, 
—  operating  temperature  range  of  -40°C  or  more  but  not  more  than  80°C, 
—  an  output  not  exceeding  18  W, 
for  use  in  the  manufacture  of  pneumatic  support  and  ventilation  systems  for  car  seats (2 ) 
02013R1387 
▼M13 
0.7857 
ex 8501 10 10 
40 
Synchronous  hybrid  stepper  motor  with: 
0 % 
— 
31.12.2024 
—  an  output  not  exceeding  18  W, 
—  two  phases, 
— 
—  a  rated  current  of  not  more  than  2,5  A/phase, 
EN — 
—  a  rated  voltage  of  not  more  than  20  V, 
—  with  or  without  a  threaded  shaft, 
for  use  in  the  manufacture  of  3D  printers (2 ) 
01.07.2020 
C3 
0.7197 
ex 8501 10 99 
56 
DC  Motor: 
0 % 
— 
31.12.2021 
—  with  a  speed  rotation  of  not  more  than  7000  rpm  (without  load), 
— 
—  with  a  nominal  voltage  of  12  V  (±  4  V), 
013.001 
—  with  a  maximum  power  of  13,78  W  (  at  3,09  A), 
—  with  a  specified  temperature  range  from  -40  °C  to  160  °C, 
—  with  a  gear  connection, 
—  with  a  mechanical  attachment  interface, 
— 
—  with  2  electrical  connections, 
209
—  with  a  maximum  torque  of  100  Nm 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6858 
ex 8501 10 99 
57 
DC  motor: 
0 % 
— 
31.12.2020 
—  with  a  rotor  speed  of  not  more  than  6 500  rpm  when  not  loaded, 
—  with  a  rated  voltage  of  12,0  V  (+/-  0,1), 
—  of  a  specified  temperature  range  of  –  40  °C  or  more,  but  not  more  than  +  165  °C, 
—  with  or  without  a  connecting  pinion, 
—  with  or  without  an  engine  connector 
0.7198 
ex 8501 10 99 
58 
DC  Motor: 
0 % 
— 
31.12.2021 
—  with  a  speed  rotation  of  not  more  than  6500  rpm  (without  load), 
—  with  a  nominal  voltage  of  12  V  (±  4  V), 
—  with  a  maximal  power  below  than  20  W, 
—  with  a  specified  temperature  range  from  -40°C  to  160°C, 
—  with  a  worm  gear  drive, 
—  with  a  mechanical  attachment  interface, 
—  with  2  electrical  connections, 
—  with  a  maximum  torque  of  75  Nm 
02013R1387 
0.5846 
ex 8501 10 99 
60 
DC  motor: 
0 % 
— 
31.12.2022 
—  with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not 
— 
more  than  6 500  rpm  when  not  loaded, 
EN — 
—  with  a  power  supply  voltage  of  100  V  or  more  but  not  more  than  240  V, 
for  use  in  the  manufacture  of  electric  fryers (2 ) 
01.07.2020 
0.6880 
ex 8501 10 99 
65 
Electric  turbocharger  actuator,  with: 
0 % 
— 
31.12.2020 
—  a  DC  motor, 
— 
—  an  integrated  gear  mechanism, 
—  a  (pulling)force  of  200  N  or  more  at  a  minimum  of  140°C  elevated  ambient 
013.001 
temperature, 
—  a  (pulling)  force  of  250  N  or  more  in  each  position  of  its  stroke, 
—  an  effective  stroke  of  15  mm  or  more  but  not  more  than  25  mm, 
— 
—  with  or  without  an  on-board  diagnostics  interface 
210
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6115 
ex 8501 10 99 
70 
DC  stepping  motor,  with: 
0 % 
— 
31.12.2023 
—  an  angle  of  step  of  7,5°  (±  0,5°), 
—  a  two-phase  winding, 
—  a  rated  voltage  of  9  V  or  more,  but  not  more  than  16,0  V 
—  of  a  specified  temperature  range  covering  at  least  -  40  °C  to  +  105  °C, 
—  with  or  without  connecting  pinion, 
—  with  or  without  motor  drive  connector 
0.6627 
ex 8501 10 99 
75 
Permanently  excited  DC  motor  with: 
0 % 
— 
31.12.2020 
—  a  multiple-phase  winding, 
—  an  external  diameter  of  28  mm  or  more  but  not  more  than  35  mm, 
—  a  rated  speed  of  not  more  than  12 000  rpm, 
—  a  power  supply  voltage  of  8  V  or  more  but  not  more  than  27  V 
0.2838 
ex 8501 10 99 
79 
DC  motor  with  brushes  and  an  internal rotor with  a  three-phase  winding,  whether  or  not 
0 % 
— 
31.12.2023 
equipped  with  a  worm,  of  a  specified  temperature  range  covering  at  least  -  20  °C  to  + 
02013R1387 
70  °C 
0.4555 
ex 8501 10 99 
80 
DC  stepping  motor,  with: 
0 % 
— 
31.12.2023 
— 
—  an  angle  of  step  of  7,5°  (±  0,5°), 
EN — 
—  a  pull-out  torque  at  25  °C  of  25  mNm  or  more, 
—  a  pull-out  pulse  rate  of  1 500  pps  or  more, 
—  a  two-phase  winding,  and 
01.07.2020 
—  a  rated  voltage  of  10,5  V  or  more,  but  not  more  than  16,0  V 
0.7250 
ex 8501 20 00 
30 
Universal  AC/DC  motor  with: 
0 % 
— 
31.12.2022 
— 
—  a  rated  output  of  1,2  kW, 
013.001 
—  a  supply  voltage  of  230  V,  and 
—  engine  brake, 
—  assembled  to  a  reduction  gear  with  output  shaft,  which  is  contained  in  a  plastic 
housing, 
— 
for  use  as  electric  drive  of  lawnmower  blades (2 ) 
211
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4201 
ex 8501 31 00 
30 
DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, 
0 % 
— 
31.12.2021 
but  not  more  than  115  mm,  a  nominal  torque  of  2,23  Nm  (±1,0  Nm),  of  an  output  of 
more than 120  W but not more than 520  W, calculated with 1 550  rpm (± 350  rpm) at a 
supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, 
for  use  with  an  electric  power  steering  control  module  (power  steering  motor) (2 ) 
0.4731 
ex 8501 31 00 
37 
Permanently  excited  DC  motor  with: 
0 % 
— 
31.12.2024 
—  a  multiple-phase  winding, 
—  an  external  diameter  of  30  mm  or  more  but  not  more  than  80  mm, 
—  a  rated  speed  of  not  more  than  15 000  rpm, 
—  an  output  of  45  W  or  more  but  not  more  than  300  W,  and 
—  a  supply  voltage  of  9  V  or  more  but  not  more  than  50  V, 
—  whether  or  not  with  a  drive  disc, 
—  whether  or  not  with  a  crankcase, 
—  whether  or  not  with  a  fan, 
02013R1387 
—  whether  or  not  with  a  cap  assembly, 
—  whether  or  not  with  a  sun  gear, 
—  whether  or  not  with  a  speed  and  rotational  direction  encoder, 
—  whether or not with or without a speed or rotational direction sensor of resolver type 
or  Hall  effect  type 
— 
EN — 
01.07.2020 
0.5954 
ex 8501 31 00 
45 
DC  motors,  brushless,  with: 
0 % 
— 
31.12.2023 
—  an  external  diameter  of  90  mm  or  more,  but  not  more  than  110  mm, 
—  a  rated  speed  of  not  more  than  3 680  rpm, 
—  an  output  of  600  W  or  more  but  not  more  than  740  W  at  2 300  rpm  and  at  80  °C, 
— 
—  a  supply  voltage  of  12  V, 
013.001 
—  a  torque  of  not  more  than  5,67  Nm, 
—  a  rotor  position  sensor, 
—  an  electronic  star-point  relay,  and 
—  for  use  with  an  electric  power  steering  control  module 
— 
212
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.5577 
ex 8501 31 00 
50 
DC  motors,  brushless,  with: 
0 % 
— 
31.12.2022 
—  an  external  diameter  of  80  mm  or  more,  but  not  more  than  200  mm, 
—  a  supply  voltage  of  9  V  or  more,  but  not  more  than  16  V, 
—  an  output  at  20  °C  of  300  W  or  more,  but  not  more  than  750  W, 
—  a  torque  at  20  °C  of  2,00  Nm  or  more,  but  not  more  than  7,00  Nm, 
—  a  rated  speed  at  20  °C  of  600  rpm  or  more,  but  not  more  than  3 100  rpm, 
—  with  or  without  a  rotor  angle  position  sensor  of  resolver  type  or  Hall  effect  type, 
—  with  or  without  a  pulley, 
of  the  kind  used  in  power  steering  systems  for  cars 
C3 
0.5978 
ex 8501 31 00 
55 
DC  motor  with  or  without  commutator,  with: 
0 % 
— 
31.12.2023 
ex 8501 32 00 
40 
—  an  external  diameter  of  24,2  mm  or  more,  but  not  more  than  140  mm, 
—  a  rated  speed  of  3300  rpm  or  more,  but  not  more  than  26200  rpm, 
02013R1387 
—  a  rated  supply  voltage  of  3,6  V  or  more,  but  not  more  than  230  V, 
—  an  output  power  of  more  than  37,5  W,  but  not  more  than  2400  W, 
—  a  free  load  current  of  not  more  than  20,1  A, 
—  a  maximum  efficiency  of  50 %  or  more, 
for  driving  hand-held  power  tools  or  lawn  mowers 
— 
EN — 
0.6809 
ex 8501 31 00 
71 
Automotive-ready,  brushless  and  permanently  excited  direct  current  motor  with: 
0 % 
— 
31.12.2020 
ex 8501 32 00 
77 
—  a  specified  speed  of  not  more  than  4 100  rpm, 
—  a  minimum  output  of  400  W,  but  not  more  than  1,3  kW  (at  12V), 
01.07.2020 
—  a  flange  diameter  of  90  mm  or  more,  but  not  more  than  150  mm, 
—  a maximum length of 210 mm, measured from the beginning of the shaft to the outer 
ending, 
—  a  housing  length  of  not  more  than  160  mm,  measured  from  the  flange  to  the  outer 
— 
ending, 
—  a  maximum  of  two-piece  (basic  housing  including  electric  components  and  flange 
013.001 
with  minimum  2  and  maximum  11  bore  holes)  aluminium  diecast  or  sheet  steel 
housing whether or not with a sealing compound (groove with an O-ring and grease), 
—  a  stator  with  single  T-tooth  design  and  single  coil  windings  in  9/6  or  12/8 
— 
topology,  and 
213
—  surface  magnets 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7005 
ex 8501 31 00 
75 
Brushless  DC  motor  assembly  comprised  of  a  motor  and  transmission,  with: 
0 % 
— 
31.12.2021 
—  electronic  control  operating  by  Hall  Effect  position  sensors, 
—  voltage  input  9  V  or  more  but  not  more  than  16  V, 
—  external  diameter  of  the  motor  70  mm  or  more  but  not  more  than  80  mm, 
—  output  motor  power  350  W  or  more  but  not  more  than  550  W, 
—  maximum  output  torque  50  Nm  or  more  but  not  more  than  52  Nm, 
—  maximum  output  rotation  speed  280  rpm  or  more  but  not  more  than  300  rpm, 
—  coaxial  male  spline  outputs  of  outer  diameter  20  mm  (±1  mm),  17  teeth  and 
minimum  length  of  teeth  25  mm  (±  1  mm),  and 
—  with  distance  between  root  of  splines  119  mm  (±  1  mm), 
for  use  in  the  manufacture  of  all-terrain  or  utility  task  vehicles (2 ) 
▼M13 
0.4855 
ex 8501 33 00 
30 
Electric  drive  for  motor  vehicles,  with  an  output  of  not  more  than  315  kW: 
0 % 
— 
31.12.2021 
ex 8501 40 80 
50 
—  with  an  AC  or  DC  motor  with  or  without  transmission, 
02013R1387 
ex 8501 53 50 
10 
—  with  or  without  power  electronics 
C3 
— 
EN — 
0.5329 
ex 8501 51 00 
30 
AC  synchronous  servo  motor with resolver and  brake for a  maximum  speed  of not  more 
0 % 
— 
31.12.2021 
ex 8501 52 20 
50 
than  6 000  rpm,  with: 
—  an  output  of  340  W  or  more  but  not  more  than  7,4  kW, 
01.07.2020 
—  a  flange  of  dimensions  of  not  more  than  180  mm  ×  180  mm,  and 
—  a  length  from  flange  to  extreme  end  of  resolver  of  not  more  than  271  mm 
— 
0.6511 
ex 8501 53 50 
20 
AC  traction  motor  of  the  Interior  Permanent  Magnet  Synchronous  Motor  (IPMSM)  type 
0 % 
— 
31.12.2024 
013.001 
with: 
—  a  torque  output  of  200  Nm  or  more,  but  not  more  than  400  Nm, 
—  a  power  output  of  50  kW  or  more,  but  not  more  than  200  kW, 
—  a  rotation  speed  of  no  more  than  15 000  rpm, 
— 
for  use  in  the  manufacture  of  electric  vehicles (2 ) 
214
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6676 
ex 8501 61 20 
35 
Fuel  cell  module,  AC  generator  with  an  output  of  7,5  kVA  or  less,  consisting  of: 
0 % 
— 
31.12.2020 
—  a  Hydrogen  generator  (desulphurizer,  reformer  and  cleaner), 
—  a  PEM  fuel  cell  stack,  and 
—  an  Inverter, 
for  use  as  a  part  in  a  heating  appliance 
0.5633 
ex 8501 62 00 
30 
Fuel  cell  system: 
0 % 
— 
31.12.2022 
—  consisting  of  at  least  phosphoric  acid  fuel  cells, 
—  in  a  housing  with  integrated  water  management  and  gas  treatment, 
—  for  permanent,  stationary  energy  supply 
0.2837 
ex 8503 00 91 
31 
Rotor,  at  the  inner  side  provided  with  one  or  two  magnetic  rings  (uniform  or  sectional) 
0 % 
p/st 
31.12.2023 
ex 8503 00 99 
32 
whether  or  not  incorporated  in  a  steel  ring 
0.2836 
ex 8503 00 99 
31 
Stamped  collector  of  an  electric  motor,  having  an  external  diameter  of  not  more  than 
0 % 
p/st 
31.12.2023 
16  mm 
02013R1387 
0.4599 
ex 8503 00 99 
33 
Stator  for  brushless  motor  of  electrical  power  steering  with  a  roundness  tolerance 
0 % 
p/st 
31.12.2021 
of  50  μm 
0.4601 
ex 8503 00 99 
34 
Rotor  for  brushless  motor  of  electrical  power  steering  with  a  roundness  tolerance 
0 % 
p/st 
31.12.2024 
— 
of  50  μm 
EN — 
0.7496 
ex 8503 00 99 
37 
Rotor  for an  electric motor,  with  the  rotor  cylindrical body  made  of  agglomerated  ferrite 
0 % 
— 
31.12.2023 
01.07.2020 
and  plastics  and  the  shaft  made  of  metal  with: 
—  diameter  of  the  rotor  body  of  17  mm  or  more  but  not  more  than  37  mm, 
—  length  of  the  rotor  body  of  12  mm  or  more  but  not  more  than  36  mm, 
—  shaft  length  of  52  mm  or  more  but  not  more  than  82  mm 
— 
013.001 
▼M13 
— 
0.5783 
ex 8503 00 99 
40 
Fuel cell membrane, in  rolls or sheets, with a width of not more than 150  cm, for use  in 
0 % 
p/st 
31.12.2022 
215
the  manufacture  of  fuel  cells  in  Heading  8501 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6161 
ex 8503 00 99 
55 
Stator  for  brushless  motor,  with: 
0 % 
p/st 
31.12.2020 
—  an  internal  diameter  of  206,6  mm  (±0,5), 
—  an  external  diameter  of  265,0  mm  (±0,2),  and 
—  a  width  of  37,2  mm  or  more  but  not  more  than  47,8  mm, 
of  a  kind  used  in  the  manufacture  of  washing  machine,  washer-dryer  or  dryer  equipped 
with  direct  drive  drums 
0.6379 
ex 8503 00 99 
60 
Engine cover for electronic belt drive steering system of galvanized steel with a thickness 
0 % 
p/st 
31.12.2024 
of  not  more  than  2,5  mm  (±0,25  mm) 
0.7760 
ex 8503 00 99 
65 
Rotor  body  of  stacked  electrical  sheet  having: 
0 % 
— 
31.12.2024 
—  a  diameter  of  18  mm  or  more  but  not  more  than  35  mm,  and 
—  a  length  of  20  mm  or  more  but  not  more  than  65  mm 
0.7761 
ex 8503 00 99 
75 
Stator  body  of  stacked  electrical  sheet  having: 
0 % 
— 
31.12.2024 
—  an  inner  diameter  of  18  mm  or  more,  but  not  more  than  35  mm, 
—  an  outer  diameter  of  35  mm  or  more,  but  not  more  than  65  mm,  and 
—  a  length  of  20  mm  or  more,  but  not  more  than  65  mm 
02013R1387 
0.7758 
ex 8503 00 99 
80 
Steel  motor  housing  having: 
0 % 
— 
31.12.2024 
—  an  inner  diameter  of  35  mm  or  more  but  not  more  than  65  mm, 
—  an  outer  diameter  of  35  mm  or  more  but  not  more  than  70  mm,  and 
—  a  length  of  35  mm  or  more  but  not  more  than  150  mm 
— 
EN — 
0.7549 
ex 8504 31 80 
15 
Electrical  Transformer  with: 
0 % 
— 
31.12.2023 
—  a  capacity  of  192  Watts  or  216  Watts, 
01.07.2020 
—  dimensions  of  not  more  than  27,1  x  26,6  x  18  mm, 
—  an  operating  temperature  range  of  -  40  °C  or  more,  but  not  more  than  +  125  °C, 
—  three  or  four  inductively  coupled  copper  wire  windings,  and 
—  9  connection  pins  at  the  bottom 
— 
0.7548 
ex 8504 31 80 
25 
Electrical  Transformer  with: 
0 % 
— 
31.12.2023 
013.001 
—  a  capacity  of  432  Watts, 
—  dimensions  of  not  more  than  24  mm  x  21  mm  x  19  mm, 
—  an  operating  temperature  range  of  -  20  °C  or  more,  but  not  more  than  +  85  °C, 
— 
—  two  windings,  and 
216
—  5  connection  pins  at  the  bottom 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4450 
ex 8504 31 80 
30 
Switching  transformers,  having  a  power  handling  capacity  of  not  more  than  1  kVA  for 
0 % 
— 
31.12.2023 
use  in  the  manufacture  of  static  converters (2 ) 
0.7547 
ex 8504 31 80 
35 
Electrical  Transformer  with: 
0 % 
— 
31.12.2023 
—  a  capacity  of  433  Watts, 
—  dimensions  of  not  more  than  37,3  x  38,2  x  28,5  mm, 
—  an  operating  temperature  range  of  -  40  °C  or  more,  but  not  more  than  +  125  °C, 
—  four  inductively  coupled  copper  wire  windings,  and 
—  13  connection  pins  at  the  bottom 
0.5598 
ex 8504 31 80 
40 
Electrical  transformers: 
0 % 
— 
31.12.2022 
—  with  a  capacity  of  1  kVA  or  less, 
—  without  plugs  or  cables, 
for  internal  use  in  the  manufacture  of  set  top  boxes  and  TVs (2 ) 
02013R1387 
0.7551 
ex 8504 31 80 
45 
Electrical  Transformer  with: 
0 % 
— 
31.12.2023 
—  a  capacity  of  0,2  Watts, 
—  dimensions  of  not  more  than  15  mm  x  15,5  mm  x  14  mm, 
—  an  operating  temperature  range  of  -  10  °C  or  more,  but  not  more  than  +  125  °C, 
—  two  inductively  coupled  copper  wire  windings, 
— 
—  5  connection  pins  at  the  bottom,  and 
EN — 
—  a  copper  shielding 
01.07.2020 
0.7000 
ex 8504 31 80 
50 
Transformers  for  use  in  the  manufacture  of  electronic  drivers,  control  devices  and  LED 
0 % 
— 
31.12.2021 
light  sources  for  lighting  industry (2 ) 
— 
0.7764 
ex 8504 31 80 
55 
Electrical  transformer  with: 
0 % 
— 
31.12.2024 
013.001 
—  a  capacity  of  0,24  kVA, 
—  an  operating  temperature  range  of  +  10  °C  or  more,  but  not  more  than  +  125  °C, 
—  five  inductively  coupled  copper  wire  windings, 
—  11  connection  pins  at  the  bottom,  and 
— 
—  dimensions  of  not  more  than  31,3  mm  x  37,8  mm  x  25,8  mm 
217
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7029 
ex 8505 11 00 
47 
Articles  in  the  form  of  a  triangle,  square  or  rectangle,  whether  or  not  arched  or  with 
0 % 
— 
31.12.2021 
rounded  corners,  intended  to  become  permanent  magnets  after  magnetisation,  containing 
neodymium,  iron  and  boron,  with  the  following  dimensions: 
—  a  length  of  9  mm  or  more  but  not  more  than  105  mm, 
—  a  width  of  5  mm  or  more  but  not  more  than  105  mm,  and 
—  a  height  of  2  mm  or  more  but  not  more  than  55  mm 
C3 
0.5584 
ex 8505 11 00 
50 
Bars  specifically  shaped,  intended  to  become  permanent  magnets  after  magnetisation, 
0 % 
p/st 
31.12.2022 
containing  neodymium,  iron  and  boron,  with  dimensions: 
—  a  length  of  15  mm  or  more  but  not  more  than  52  mm, 
—  a  width  of  5  mm  or  more  but  not  more  than  42  mm, 
of a  kind  to  be  used  in  the  manufacture of  electric servomotors for industrial automation 
02013R1387 
0.7567 
ex 8505 11 00 
53 
Permanent  magnets  of  a  neodymium  alloy  cylindrical  shaped  with  notch  with  internal 
0 % 
— 
31.12.2023 
threaded  bore  on  one  side,  with: 
—  a  length  of  97,5  mm  or  more,  but  not  more  than  225  mm, 
—  a  diameter  of  19  mm  or  more,  but  not  more  than  25  mm 
— 
0.6857 
ex 8505 11 00 
55 
Flat  bars  of  an  alloy  of  samarium  and  cobalt  with: 
0 % 
p/st 
31.12.2020 
EN — 
ex 8505 19 90 
40 
—  a  length  of  30,4  mm  (±0,05  mm), 
—  a  width  of  12,5  mm  (±0,15  mm), 
—  a  thickness  of  6,9  mm  (±0,05  mm),  or 
01.07.2020 
composed  of  ferrites  in  the  shape  of  a  quarter  sleeves  with: 
—  a  length  of  46  mm  (±0,75  mm), 
—  a  width  of  29,7  mm  (±0,2  mm), 
intended to become permanent magnets after magnetisation, of a kind used in car starters 
and  devices  extending  the  drive  range  of  electric  cars 
— 
013.001 
0.5585 
ex 8505 11 00 
63 
Rings,  tubes,  bushings  or  collars  made  from  an  alloy  of  neodymium,  iron  and  boron, 
0 % 
p/st 
31.12.2022 
with: 
—  an  external  diameter  of  not  more  than  45  mm, 
— 
—  a  height  of  not  more  than  45  mm, 
218
of  a  kind  used  in  the  manufacture  of  permanent  magnets  after  magnetisation 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3740 
ex 8505 11 00 
65 
Permanent  magnets  consisting  of  an  alloy  of  neodymium,  iron  and  boron,  either  in  the 
0 % 
p/st 
31.12.2023 
shape  of  a  rectangle,  whether  or  not  rounded,  with  a  rectangular or  a  trapezoidal  section 
having: 
—  a  length  of  not  more  than  140  mm, 
—  a  width  of  not  more  than  90  mm,  and 
—  a  thickness  of  not  more  than  55  mm, 
or  in  the  shape  of  curved  rectangle  (tile  type)  having: 
—  a  length  of  not  more  than  75  mm, 
—  a  width  of  not  more  than  40  mm, 
—  a  thickness  of  not  more  than  7  mm,  and 
—  a  radius  of  curvature  of  more  than  86  mm  but  not  more  than  241  mm, 
or  in  the  shape  of  a  disc  with  a  diameter  of  not  more  than  90  mm,  whether  or  not 
containing  a  hole  in  the  centre 
0.7788 
ex 8505 11 00 
68 
Blocks made of neodymium, iron and boron, whether or not covered with zinc or an alloy 
0 % 
— 
31.12.2024 
of  samarium  and  cobalt  with: 
—  a  length  of  13,8  mm  or  more  but  not  more  than  45,2  mm, 
—  a  width  of  7,8  mm  or  more  but  not  more  than  25,2  mm, 
—  a  height  of  1,3  mm  or  more  but  not  more  than  4,7  mm, 
for  use  in  the  manufacture  of  permanent  magnets (2 ) 
02013R1387 
0.5948 
ex 8505 11 00 
70 
Disc  consisting  of  an  alloy  of  neodymium,  iron  and  boron,  covered  with  nickel  or  zinc, 
0 % 
— 
31.12.2023 
that  after  magnetisation  is  intended  to  become  a  permanent  magnet: 
—  whether  or  not  containing  a  hole  in  the  centre, 
—  with  a  diameter  of  not  more  than  90  mm, 
— 
of  a  kind  used  in  car  loudspeakers 
EN — 
0.6347 
ex 8505 11 00 
75 
A  quarter  sleeve  intended  to  become  permanent  magnet  after  magnetization: 
0 % 
p/st 
31.12.2024 
01.07.2020 
—  consisting  of  at  least  neodymium,  iron  and  boron, 
—  with  a  width  of  9,1  mm  or  more  but  not  more  than  10,5  mm, 
—  with  a  length  of  20  mm  or  more  but  not  more  than  30,1  mm, 
of  a  kind  used  on  rotors  for  the  manufacture  of  fuel  pumps 
— 
013.001 
0.7789 
ex 8505 19 10 
20 
Arc  segments  of  permanent  magnets  of  agglomerated  ferrite,  with: 
0 % 
— 
31.12.2024 
—  a  length  of  16,8  mm  or  more,  but  not  more  than  110,2  mm, 
—  a  width  of  14,8  mm  or  more,  but  not  more  than  75,2  mm, 
—  a  thickness  of  4,8  mm  or  more,  but  not  more  than  13,2  mm, 
— 
for  use  in  the  manufacture  of  electromotor  rotors  for  ventilation  and  air-conditioning 
219
systems (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5937 
ex 8505 19 90 
30 
Articles  of  agglomerated  ferrite in  the  shape  of  a  disc  with  a  diameter  of  not  more  than 
0 % 
— 
31.12.2023 
120  mm,  containing  a  hole  in  the  centre  intended  to  become  permanent  magnets  after 
magnetisation  with  a  remanence  between  245  mT  and  470  mT 
0.7299 
ex 8505 19 90 
50 
Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent 
0 % 
p/st 
31.12.2022 
magnet  after  magnetisation: 
—  whether  or  not  with  bevelled  edges, 
—  of  a  length  of  27  mm  or  more  but  not  more  than  32  mm  (±0,15  mm), 
—  of  a  width  of  8,5  mm  or  more  but  not  more  than  9,5  mm  (+0,05  mm  /  -0,09  mm), 
—  of  a  thickness  of  5,5  mm  or  more  but  not  more  than  5,8  mm  (+  0/-  0,2  mm),  and 
—  of  a  weight  of  6,1  g  or  more  but  not  more  than  8,3  g 
▼M13 
0.7511 
ex 8505 19 90 
60 
Articles  of  agglomerated  ferrite in  the  shape  of  a  half-sleeve or  a  quarter-sleeve,  or  with 
0 % 
— 
31.12.2023 
rounded  corners,  intended  to  become  permanent  magnets  after  magnetisation,  with  the 
02013R1387 
following  dimensions: 
—  a  length  of  10  mm  or  more  but  not  more  than  100  mm  (±  1  mm), 
—  a  width  of  10  mm  or  more  but  not  more  than  100  mm  (±  1  mm), 
—  a  thickness  of  2  mm  or  more  but  not  more  than  15  mm  (±0,15  mm) 
— 
C3 
EN — 
01.07.2020 
0.4029 
ex 8505 20 00 
30 
Electromagnetic  clutch,  for  use  in  the  manufacture  of  compressors  of  air  conditioning 
0 % 
p/st 
31.12.2023 
machines  of  motor  vehicles (2 ) 
0.6855 
ex 8506 50 10 
10 
Lithium  cylindrical  primary  cells  with: 
0 % 
— 
31.12.2021 
— 
—  a  diameter  of  14,0  mm  or  more  but  not  more  than  26,0  mm, 
013.001 
—  a  length  of  2,2  mm  or  more  but  not  more  than  51  mm, 
—  a  voltage  of  1,5  V  or  more,  but  not  more  than  3,6  V, 
—  a  capacity  of  0,15  Ah  or  more,  but  not  more  than  5,00  Ah, 
— 
for use  in  the  manufacture of  telemetry and  medical devices,  electronic meters or remote 
controls (2 ) 
220
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7416 
ex 8506 50 30 
10 
Lithium  manganese  dioxide  cell,  with: 
0 % 
— 
31.12.2022 
—  a  diameter  of  20  mm  or  more  but  not  more  than  25  mm, 
—  a  length  of  3  mm  or  more  but  not  more  than  6  mm, 
—  a  voltage  of  3  V  or  more  but  not  more  than  3,4  V, 
—  a  capacity  of  200  mAh  or  more  but  not  more  than  600  mAh, 
—  an  automotive  test  temperature  range  from  -40  °C  to  +125  °C, 
for  use  as  a  component  within  the  manufacture  of  Tyre  Pressure  Measuring  Systems 
(TPMS) (2 ) 
0.2490 
ex 8506 50 90 
10 
Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm 
0 % 
— 
31.12.2023 
and a voltage of not more than 2,8 V 
0.2488 
ex 8506 50 90 
30 
Lithium-iodine  or  lithium-silver vanadium  oxide  single  cell  battery  of  dimensions  of  not 
0 % 
— 
31.12.2023 
more  than  28  mm  ×  45  mm  ×  15  mm  and  a  capacity  of  not  less  than  1,05  Ah 
02013R1387 
0.5180 
ex 8506 90 00 
10 
Cathode,  in  rolls,  for  air  zinc  button  cell  batteries  (hearing  aid  batteries) (2 ) 
0 % 
— 
31.12.2023 
— 
0.7641 
ex 8507 60 00 
13 
Prismatic  lithium-ion  electric  accumulators  with: 
1,3 % 
— 
31.12.2020 
EN — 
—  a  width  of  173,0  mm  (±0,3  mm), 
—  a  thickness  of  45,0  mm  (±0,3  mm), 
—  a  height  125,0  mm  (±0,3  mm), 
01.07.2020 
—  a  nominal  voltage  of  3,67  V  (±0,01  V),  and 
—  a  nominal  capacity  of  94  Ah  and/or  120  Ah, 
for  use  in  the  manufacture  of  rechargeable  electric  vehicle  batteries (2 ) 
— 
013.001 
0.6685 
ex 8507 60 00 
15 
Cylindrical  lithium-ion-accumulators  or  modules  with: 
1,3 % 
— 
31.12.2020 
—  a  nominal  capacity  of  8,8  Ah  or  more,  but  not  more  than  18  Ah, 
—  a  nominal  voltage  of  36  V  or  more,  but  not  more  than  48  V, 
—  a  power  of  300  Wh  or  more,  but  not  more  than  648  Wh, 
— 
for  use  in  the  manufacture  of  electric  bicycles (2 ) 
221
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6625 
ex 8507 60 00 
17 
Lithium-ion  starter  accumulator,  consisting  of  four  rechargeable  lithium-ion  secondary 
0 % 
— 
31.12.2020 
cells,  with: 
—  a  rated  voltage  of  12  V, 
—  a  length  of  350  mm  or  more  but  not  more  than  355  mm, 
—  a  width  of  170  mm  or  more  but  not  more  than  180  mm, 
—  a  height  of  180  mm  or  more  but  not  more  than  195  mm, 
—  weighing  10  kg  or  more  but  not  more  than  15  kg, 
—  a  nominal  charge  of  60  Ah  or  more,  but  not  more  than  80  Ah 
0.7663 
ex 8507 60 00 
18 
Lithium-ion  polymer  accumulator  equipped  with  a  battery  management  system  and  can- 
1,3 % 
— 
31.12.2020 
bus  interface  with: 
—  a  length  of  not  more  than  1600  mm, 
—  a  width  of  not  more  than  448  mm, 
—  a  height  of  not  more  than  395  mm, 
—  a  weight  of  125  kg  or  more  but  not  more  than  135  kg, 
02013R1387 
—  a  nominal  voltage  of  280  V  or  more  but  not  more  than  400  V, 
—  a  nominal  capacity  of  9,7  Ah  or  more  but  not  more  than  10,35  Ah, 
—  a  charging  voltage  of  110  V  or  more  but  not  more  than  230  V,  and 
—  containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a 
steel  casing, 
for  use  in  the  manufacture  of  vehicle  capable  of  being  charged  by  plugging  to  external 
— 
source  of  electric  power  of  heading  8703 (2 ) 
EN — 
01.07.2020 
0.7717 
ex 8507 60 00 
22 
Integrated  battery  system  in  a  metal  case  with  holders,  consisting  of: 
1,3 % 
— 
31.12.2020 
—  a lithium-ion battery with voltage of 48  V (± 5 V) and capacity of 0,44  kWh  (±0,05 
kWh), 
— 
—  Battery  Management  System, 
013.001 
—  a  relay, 
—  a  low  voltage  converter  (DC/DC), 
—  at  least  one  connector, 
— 
for  use  in  the  manufacture  of  hybrid  motor  vehicles (2 ) 
222
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6697 
ex 8507 60 00 
27 
Lithium-ion  cylindrical  accumulator  with: 
0 % 
— 
31.12.2020 
—  a  nominal  capacity  of  10  Ah  or  more,  but  not  more  than  20  Ah, 
—  a  nominal  voltage  of  12,8  V  (±  0.05)  or  more,  but  not  more  than  15,2  V  (±0,05), 
—  a  power  of  128  Wh  or  more,  but  not  more  than  256  Wh, 
for  use  in  the  manufacture  of  electric  bicycle  drives (2 ) 
0.2907 
ex 8507 60 00 
30 
Cylindrical  lithium-ion  accumulator  or  module,  with  a  length  of  63  mm  or  more  and  a 
1,3 % 
— 
31.12.2020 
diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use 
in  the  manufacture  of  rechargeable  batteries (2 ) 
▼M13 
0.6703 
ex 8507 60 00 
33 
Lithium-ion  accumulator,  with: 
1,3 % 
— 
31.12.2020 
—  a  length  of  150  mm  or  more,  but  not  more  than  1 000  mm, 
—  a  width  of  100  mm  or  more,  but  not  more  than  1 000  mm, 
—  a  height  of  200  mm  or  more,  but  not  more  than  1 500  mm, 
—  a  weight  of  75  kg  or  more,  but  not  more  than  200  kg, 
—  a  nominal  capacity  of  150  Ah  or  more,  but  not  more  than  500  Ah, 
02013R1387 
—  a nominal output voltage of 230 V AC (Line to neutral) or a nominal voltage of 64 V 
(±  10 %) 
0.6702 
ex 8507 60 00 
37 
Lithium-ion  accumulator,  with: 
1,3 % 
— 
31.12.2020 
— 
—  a  length  of  1 200  mm  or  more,  but  not  more  than  2 000  mm, 
EN — 
—  a  width  of  800  mm  or  more,  but  not  more  than  1 300  mm, 
—  a  height  of  2 000  mm  or  more,  but  not  more  than  2 800  mm, 
—  a  weight  of  1 800  kg  or  more,  but  not  more  than  3 000  kg, 
01.07.2020 
—  a  nominal  capacity  of  2 800  Ah  or  more,  but  not  more  than  7 200  Ah 
C3 
— 
0.5548 
ex 8507 60 00 
50 
Modules  for  the  assembly  of  batteries  of  ion  lithium  electric  accumulators  with: 
1,3 % 
— 
31.12.2020 
013.001 
—  a  length  of  298  mm  or  more,  but  not  more  than  500  mm, 
—  a  width  of  33,5  mm  or  more,  but  not  more  than  209  mm, 
—  a  height  of  75  mm  or  more,  but  not  more  than  228  mm, 
— 
—  a  weight  of  3,6  kg  or  more,  but  not  more  than  17  kg,  and 
223
—  a  nominal  energy  of  458  Wh  or  more,  but  not  more  than  2 158  Wh 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.5342 
ex 8507 60 00 
65 
Cylindrical  lithium  ion  cell  with: 
1,3 % 
— 
31.12.2021 
—  3,5  VDC  to  3,8  VDC, 
—  300  mAh  to  900  mAh,  and 
—  a  diameter  of  10,0  mm  to  14,5  mm 
0.7888 
ex 8507 60 00 
68 
Lithium-ion  accumulator  in  a  metal  housing  with: 
1,3 % 
— 
31.12.2024 
—  a  length  of  173  mm  or  more  but  not  more  than  175  mm, 
—  a  width  of  41,5  mm  or  more  but  not  more  than  43  mm, 
—  a  height  of  85  mm  or  more  but  not  more  than  103  mm, 
—  a  nominal  voltage  of  3,6  V  or  more  but  not  more  than  3,75  V,  and 
—  a  nominal  capacity  of  93  Ah  or  more  but  not  more  than  94  Ah 
0.6753 
ex 8507 60 00 
77 
Lithium-ion  rechargeable  batteries,  with: 
1,3 % 
— 
31.12.2020 
—  a  length  of  700  mm  or  more,  but  not  more  than  2 820  mm, 
—  a  width  of  935  mm  or  more,  but  not  more  than  1 660  mm, 
—  a  height  of  85  mm  or  more,  but  not  more  than  700  mm, 
—  a  weight  of  250  kg  or  more,  but  not  more  than  700  kg, 
02013R1387 
—  a  power  of  not  more  than  175  kWh, 
—  a  nominal  voltage  of  400  V 
C3 
— 
EN — 
0.5356 
ex 8507 60 00 
75 
Rectangular  lithium-ion-accumulator  with: 
0 % 
— 
31.12.2021 
—  a  metal  casing, 
—  a  length  of  173  mm  (±0,15  mm), 
01.07.2020 
—  a  width  of  21  mm  (±0,1  mm), 
—  a  height  of  91  mm  (±0,15  mm), 
—  a  nominal  voltage  of  3,3  V,  and 
—  a  nominal  capacity  of  21  Ah  or  more 
— 
013.001 
0.4973 
ex 8507 60 00 
85 
Lithium-ion  modules  for  incorporation  in  lithium-ion  rechargeable  batteries: 
1,3 % 
— 
31.12.2020 
—  of  a  length  of  300  mm  or  more,  but  not  more  than  350  mm, 
—  of  a  width  of  79,8  mm  or  more,  but  not  more  than  225  mm, 
—  of  a  height  of  35  mm  or  more,  but  not  more  than  168  mm, 
— 
—  of  a  weight  of  3,95  kg  or  more,  but  not  more  than  8,85  kg, 
224
—  with  a  rating  of  66,6  Ah  or  more,  but  not  more  than  129  Ah 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7697 
ex 8507 90 30 
20 
Safety  Reinforced  Separator  designed  to  separate  cathode  and  anode  in  lithium-ion 
1,3 % 
— 
31.12.2020 
electric  accumulators  for  motor  vehicle  batteries  for  use  in  the  manufacture  of  lithium- 
ion  electric  accumulators  for  motor  vehicle  batteries (2 ) 
0.5313 
ex 8507 90 80 
70 
Cut  plate  of  nickel-plated  copper  foil,  with: 
0 % 
p/st 
31.12.2021 
—  a  width  of  70  mm  (±  5  mm), 
—  a  thickness  of  0,4  mm  (±0,2  mm), 
—  a  length  of  not  more  than  55  mm, 
for  use  in  the  manufacture  of  lithium-ion  electric  rechargeable  batteries (2 ) 
0.5012 
ex 8508 70 00 
10 
Printed  circuit  board  without  a  housing  for  actuating  and  controlling  vacuum  cleaner 
0 % 
p/st 
31.12.2020 
ex 8537 10 98 
96 
brushes  powered  by  a  motor  with  an  output  of  not  more  than  300  W 
0.5014 
ex 8508 70 00 
20 
Electronic  circuit  cards  that: 
0 % 
p/st 
31.12.2020 
ex 8537 10 98 
98 
—  are connected by wire or radio frequency to each other and the motor controller card, 
and 
—  regulate  the  functioning  (switching  on  or  off  and  suction  capacity)  of  vacuum 
02013R1387 
cleaners  according  to  a  stored  program, 
—  whether  or  not  fitted  with  indicators  that  display  the  functioning  of  the  vacuum 
cleaner  (suction  capacity  and/or  dust  bag  full  and/or  filter  full) 
— 
0.6304 
ex 8511 30 00 
30 
Igniter  integrated  coil  assembly  with: 
0 % 
p/st 
31.12.2024 
EN — 
—  an  igniter, 
—  a  coil  on  plug  assembly  with  an  integrated  mounting  bracket, 
—  a  housing, 
01.07.2020 
—  a  length  of  90  mm  or  more  but  not  more  than  200  mm  (±  5  mm), 
—  an  operating  temperature  of  -  40  °C  or  more  but  not  more  than  130  °C, 
—  a  voltage  of  10,5  V  or  more,  but  not  more  than  16  V 
— 
0.7024 
ex 8511 30 00 
55 
Ignition  coil: 
0 % 
— 
31.12.2021 
013.001 
—  with  a  length  of  50  mm  or  more,  but  not  more  than  200  mm, 
—  with  an  operating  temperature  of  -  40  °C  or  more,  but  not  more  than  140  °C,  and 
—  with  a  voltage  of  9  V  or  more,  but  not  more  than  16  V, 
— 
—  with  or  without  connection  cable, 
for  use  in  the  manufacture  of  engines  of  motor  vehicles (2 ) 
225
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7025 
ex 8511 80 00 
20 
Glow-plug  for  pre-heating  of  the  diesel  engines  with: 
0 % 
— 
31.12.2021 
—  an  operating  temperature  of  more  than  800  °C, 
—  a  voltage  of  5  V  or  more,  but  not  more  than  16  V, 
—  a  heating  rod  containing  silicon  nitride  (Si 3N 4)  and  molybdenum  disilicide  (MoSi 2), 
and 
—  a  metal  housing, 
for  use  in  the  manufacture  of  diesel  engines  of  motor  vehicles (2 ) 
0.6562 
ex 8512 20 00 
20 
Information screen displaying  at least time, date and  status of safety features in a vehicle 
0 % 
p/st 
31.12.2024 
with an  operating voltage  of  12  V  or more,  but  not  more  than  14,4  V,  of  a  kind  used  in 
the  manufacturing  of  goods  of  Chapter  87 
0.6856 
ex 8512 20 00 
30 
Lighting  module,  containing  at  least: 
0 % 
p/st 
31.12.2020 
—  two  LEDs, 
—  glass  or  plastic  lenses,  focusing/scattering  the  light  emitted  by  the  LEDs, 
—  reflectors  redirecting  the  light  emitted  by  the  LEDs, 
in  an  aluminium  housing  with  a  radiator,  mounted  at  a  bracket  with  an  actuator 
0.6503 
ex 8512 20 00 
40 
Fog  lamp  with  a  galvanised  inner  surface,  containing: 
0 % 
p/st 
31.12.2024 
—  a  plastic  holder  with  three  or  more  brackets, 
—  one  or  more  12  V  bulbs, 
02013R1387 
—  a  connector, 
—  a  plastic  cover, 
—  whether  or  not  with  a  connection  cable, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.6504 
ex 8512 30 90 
10 
Horn  assembly  operating  on  piezomechanical  principle  for  generating  a  specific  sound 
0 % 
p/st 
31.12.2024 
— 
signal,  with  a  voltage  of  12  V,  comprising: 
EN — 
—  coil, 
—  magnet, 
—  metal  membrane, 
01.07.2020 
—  connector, 
—  Holder, 
of  a  kind  used  in  the  manufacture  of  goods  of  Chapter  87 
▼M13 
— 
013.001 
0.6863 
ex 8512 30 90 
20 
Warning  buzzer  for  parking  sensor  system  in  a  plastic  casing  operating  on  the  piezo- 
0 % 
p/st 
31.12.2020 
mechanic  principle,  containing: 
—  a  printed  circuit  board, 
—  a  connector, 
— 
—  whether  or  not  a  metal  holder, 
226
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7361 
ex 8512 30 90 
30 
Sound  alarm  device  for  protection  against  burglary  into  the  vehicle: 
0 % 
— 
31.12.2022 
—  with  an  operating  temperature  of  -  45  °C  or  more,  but  not  more  than  +  95  °C, 
—  with  a  voltage  of  9  V  or  more  but  not  more  than  16  V, 
—  in  a  plastic  housing, 
—  whether  or  not  with  a  metal  holder, 
for  use  in  the  manufacture  of  motor  vehicles (2 ) 
0.5983 
ex 8512 40 00 
10 
Car  door  mirror  heating  foil: 
0 % 
— 
31.12.2023 
ex 8516 80 20 
20 
—  with  two  electrical  contacts, 
—  with  an  adhesive  layer  on  both  sides  (on  the  side  of  the  plastic  holder  of  the  mirror 
and  on  the  side  of  the  mirror  glass), 
—  with  a  protective  paper  film  on  both  sides 
0.6522 
ex 8514 20 80 
10 
Cavity  assembly  comprising  at  least: 
0 % 
p/st 
31.12.2024 
ex 8516 50 00 
10 
—  a  transformer with  an  input  of  not  more  than  240  V  and  an  output  of  not  more  than 
ex 8516 60 80 
10 
3 000  W, 
—  an  AC  or  DC  fan  motor  with  an  output  of  not  more  than  42  watts, 
—  a  housing  made  of  stainless  steel, 
02013R1387 
—  with or without a magnetron of a microwave output  power of not more than 900  W, 
for use in the manufacture of built-in products of subheadings 8514 2080, 8516 5000 and 
8516  6080 (2 ) 
0.4732 
ex 8516 90 00 
60 
Ventilation  sub-assembly  of  an  electric  deep-fat  fryer: 
0 % 
p/st 
31.12.2024 
— 
—  fitted  with  a  motor  having  a  power  rating  of  8  W  at  4 600  rpm, 
EN — 
—  governed  by  an  electronic  circuit, 
—  operating  at  ambient  temperatures  above  110  °C, 
—  fitted  with  a  thermoregulator 
01.07.2020 
0.5845 
ex 8516 90 00 
70 
Inner  pot: 
0 % 
p/st 
31.12.2022 
—  containing  side  and  central  openings, 
—  of  annealed  aluminium, 
— 
—  with  a  ceramic  coating,  heat  resistant  to  more  than  200  °C, 
013.001 
for  use  in  the  manufacture  of  an  electric  fryer (2 ) 
0.6521 
ex 8516 90 00 
80 
Door  assembly  incorporating  a  capacitive  sealing  element  and  wavelength  choke  for  use 
0 % 
p/st 
31.12.2024 
— 
in  the  manufacture  of  built-in  products  of  subheadings  8514 20 80,  8516 50 00  and 
227
8516 60 80 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4733 
ex 8521 90 00 
20 
Digital  video  recorder: 
0 % 
— 
31.12.2024 
—  without  a  hard  disk  drive, 
—  with  or  without  a  DVD-RW  drive, 
—  with either motion detection or capability of motion detection through IP connectivity 
via  LAN  connector, 
—  with  or  without  a  USB  serial  port, 
for  use  in  the  manufacture  of  closed-circuit  television  (CCTV)  surveillance  systems (2 ) 
0.3108 
ex 8525 80 19 
31 
Camera: 
0 % 
— 
31.12.2023 
ex 8525 80 91 
10 
—  of  a  weight  of  not  more  than  5,9  kg, 
—  without  a  housing, 
—  of  dimensions  of  not  more  than  405  mm  ×  315  mm, 
—  with  a  single  Charge-Couple-Device  (CCD)  or  Complementary  Metal  Oxide  Semi­
conductor  (CMOS)  sensor, 
—  with  effective  pixels  of  not  more  than  5  megapixels, 
for use in closed circuit television (CCTV) surveillance systems or in appliances for eye- 
checks (2 ) 
02013R1387 
0.4735 
ex 8525 80 19 
60 
Image  scanning  cameras,  using: 
0 % 
— 
31.12.2024 
—  a  'Dynamic'-  or  'Static  overlay  lines'  system, 
—  an  output  NTSC  video  signal, 
—  a  voltage  of  6,5  V  or  more, 
— 
—  an  illuminance  of  0,5  lux  or  more 
EN — 
0.6694 
ex 8525 80 19 
65 
Cameras  using  MIPI  electrical  interface  with: 
0 % 
— 
31.12.2020 
01.07.2020 
—  an  image  sensor, 
—  an  objective  (lens), 
—  a  colour  processor, 
—  a  flexible  printed  circuit  board  or  a  printed  circuit  board, 
—  whether  or  not  capable  of  receiving  audio  signals, 
— 
—  a  module  dimension  of  not  more  than  15  mm  x  15  mm  x  15  mm, 
013.001 
—  a  resolution  of  2  mega  pixel  or  more  (1616*1232  pixels  and  higher), 
—  whether  or  not  wired,  and 
—  a  housing, 
— 
for  use  in  the  manufacture  of  products  falling  within  subheading  8517 12 00  or 
8471 30 00 (2 ) 
228
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4734 
ex 8525 80 19 
70 
Long  wavelength  infrared  camera  (LWIR  camera)  (according  to  ISO/TS  16949),  with: 
0 % 
— 
31.12.2024 
—  a  sensitivity  in  the  wavelength  area  of  7,5  μm  or  more,  but  not  more  than  17  μm, 
—  a  resolution  of  up  to  640  ×  512  pixels, 
—  a  weight  of  not  more  than  400  g, 
—  measurements  of  not  more  than  70  mm  ×  86  mm  ×  82  mm, 
—  whether  or  not  in  a  housing, 
—  with  automotive-  qualified  plug,  and 
—  a  deviation  of  the  output  signal  over  the  entire  work  temperature  range  of  not  more 
than  20 % 
0.6316 
ex 8528 59 00 
20 
Liquid  crystal  display  colour  video  monitor  assembly  mounted  on  a  frame, 
0 % 
— 
31.12.2024 
—  excluding  those  combined  with  other  apparatus, 
—  comprising  touch  screen  facilities,  a  printed  circuit  board  with  drive  circuitry  and 
power  supply, 
02013R1387 
used  for  permanent  incorporation  or  permanent  mounting  into  entertainment  systems  for 
vehicles (2 ) 
— 
EN — 
0.7715 
ex 8528 59 00 
30 
Electronic device with LCD  touch  screen display powered  by  a voltage of 12  V  or more 
0 % 
— 
31.12.2024 
but  not  more  than  14,4  V,  containing: 
01.07.2020 
—  a  LCD  control  processor, 
—  a  GPS  module, 
—  a  Bluetooth  module, 
—  an  USB  port, 
—  a  radio  signal  tuner, 
— 
—  whether  or  not  containing  DAB  module, 
013.001 
—  whether  or  not  containing  functions  for  cooperation  with  E-CALL, 
—  whether  or  not  containing  an  integrated  control  panel, 
—  whether  or  not  containing  connectors, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
— 
229
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.6689 
ex 8529 90 65 
28 
Electronic  assembly  comprising  a  printed  circuit  board  with  at  least: 
0 % 
p/st 
31.12.2020 
—  processors  for  multi-media  applications  and  video  signal  processing, 
—  FPGA  (Field  Programmable  Gate  Array), 
—  flash  memory, 
—  operating  memory, 
—  with  or  without  USB,  HDMI,  VGA-  and  RJ-45  interfaces, 
—  sockets  and  plugs  for  connecting  an  LCD-display,  an  LED  lighting  and  a  control 
panel 
C3 
0.2434 
ex 8529 90 65 
30 
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising 
0 % 
p/st 
31.12.2023 
ex 8548 90 90 
44 
at  least  a  micro-controller  and  a  video-processor,  mounted  on  a  leadframe and  contained 
in  a  plastic  housing 
02013R1387 
0.4140 
ex 8529 90 65 
50 
Tuner  transforming  high-frequency  signals  into  mid-frequency  signals,  for  use  in  the 
0 % 
p/st 
31.12.2021 
manufacture  of  products  falling  under  heading  8528 (2 ) 
0.4893 
ex 8529 90 65 
65 
Printed  circuit  board  for  distributing  supply  voltage  and  control  signals  directly  to  a 
0 % 
p/st 
31.12.2020 
— 
ex 8529 90 92 
53 
control  circuit  on  a  TFT  glass  panel  of  a  LCD  module 
EN — 
0.4305 
ex 8529 90 65 
75 
Modules  comprising  at  least  semiconductor  chips  for: 
0 % 
p/st 
31.12.2022 
01.07.2020 
—  the  generation  of  driving  signals  for  pixel  addressing,  or 
—  driving  addressing  pixels 
— 
0.3966 
ex 8529 90 92 
15 
LCD  modules: 
0 % 
p/st 
31.12.2023 
ex 8548 90 90 
60 
—  solely  consisting  of  one  or  more  TFT  glass  or  plastic  cells, 
013.001 
—  not  combined  with  touch  screen  facilities, 
—  with one or more printed circuits boards with control electronics for pixel addressing 
only, 
— 
—  with  or  without  backlight  unit,  and 
230
—  with  or  without  inverters 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4890 
ex 8529 90 92 
25 
LCD  modules,  not  combined  with  touch  screen  facilities,  solely  consisting  of: 
0 % 
p/st 
31.12.2020 
—  one  or  more  TFT  glass  or  plastic  cells, 
—  a  die  cast  heat  sink, 
—  a  backlight  unit, 
—  one  printed  circuit  board  with  micro  controller,  and 
—  LVDS  (Low  Voltage  Differential  Signalling)  interface, 
for  use  in  the  manufacture  of  radios  for  motor  vehicles (2 ) 
0.7369 
ex 8529 90 92 
33 
LCD  modules  combined  with  touch  screen  facilities: 
0 % 
— 
31.12.2022 
—  solely  consisting  of  one  or  more  TFT  cells, 
—  with a diagonal measurement of the screen of 10,7 cm or more but not more than 36 
cm, 
—  with  or  without  LED  backlight, 
—  with  control  electronics  for  pixel  addressing  only, 
—  without  an  EPROM  memory  (Erasable  Programmable  Read-only  Memory), 
—  with  digital  RGB  Interface  (Red,  Green,  Blue  Interface),  Touch-Screen  Interface, 
used  solely  for  installation  in  motor  vehicles  of  Chapter  87 (2 ) 
02013R1387 
0.6654 
ex 8529 90 92 
37 
Fastening  and  covering  ledges  of  aluminium  alloy  containing: 
0 % 
— 
31.12.2020 
—  silicon  and  magnesium, 
— 
—  with  a  length  of  300  mm  or  more  but  not  more  than  2 200  mm, 
EN — 
specifically  shaped  for  use  in  the  manufacture  of  TV  sets (2 ) 
01.07.2020 
0.2425 
ex 8529 90 92 
42 
Aluminium  heat  sinks  and  cooling  fins,  for  maintaining  the  operating  temperature  of 
0 % 
p/st 
31.12.2023 
transistors  and  integrated  circuits,  for  use  in  the  manufacture  of  products  falling  within 
heading  8527  or  8528 (2 ) 
— 
013.001 
0.3198 
ex 8529 90 92 
43 
Plasma display module incorporating only address and display electrodes, with or without 
0 % 
p/st 
31.12.2023 
driver  and/or  control  electronics  for  pixel  address  only  and  with  or  without  a  power 
— 
supply 
231
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4030 
ex 8529 90 92 
45 
Integrated  circuit  package  with  TV  reception  functionality  containing  a  channel  decoder 
0 % 
p/st 
31.12.2023 
die,  tuner  die,  power  management  die,  GSM  filters  and  discrete  as  well  as  embedded 
passive  circuit  elements  for  reception  of  digitally  broadcasting  videosignals  of  DVB-T 
and  DVB-H  formats 
0.4609 
ex 8529 90 92 
47 
Area image sensors ('progressive scan' Interline CCD-Sensor or CMOS-Sensor) for digital 
0 % 
p/st 
31.12.2024 
video cameras in the form of analogue or digital, monolithic integrated circuit with pixels 
of  not  more  than  12  μm  ×  12  μm  in  monochromic  version  with  microlenses  applied  to 
each  individual  pixel  (microlens  array)  or  in  polychromic  version  with  a  colour  filter, 
whether  or  not  with  a  lenslet  (micro  lens)  array  with  one  lenslet  mounted  on  each 
individual  pixel 
02013R1387 
0.4616 
ex 8529 90 92 
49 
AC  socket  with  a  noise  filter,  composed  of: 
0 % 
p/st 
31.12.2024 
ex 8536 69 90 
83 
—  AC  socket  (for  power  cord  connection)  of  230  V, 
—  integrated  noise  filter  composed  of  capacitors  and  inductors, 
—  cable  connector  for  connecting  an  AC  socket  with  the  PDP  (Plasma  display  panel) 
power  supply  unit, 
— 
whether  or  not  equipped  with  a  metal  support,  which  joins  the  AC  socket  to  the 
PDP  TV  set 
EN — 
01.07.2020 
0.7489 
ex 8529 90 92 
51 
OLED  modules,  consisting  of  one  or  more  TFT  glass  or  plastic  cells: 
0 % 
— 
31.12.2023 
—  a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm, 
—  with  a  thickness  of  not  more  than  55mm, 
— 
—  containing  organic  material, 
013.001 
—  with  control  electronic  for  pixel  addressing  only, 
—  with  V-by-One  Interface  and  with  or  without  a  plug  for  power  supply, 
—  with  or  without  back  cover, 
— 
of  a  kind  used  in  the  manufacture  of  TV  sets  and  monitors 
232
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6343 
ex 8529 90 92 
55 
OLED  modules,  consisting  of: 
0 % 
p/st 
31.12.2024 
—  one  or  more  TFT  glass  or  plastic  cells,  containing  organic  material, 
—  with  or  without  combined  touch  screen  facilities,  and 
—  one  or  more  printed  circuit  boards  with  control  electronics  for  pixel  addressing, 
for  use  in  the  manufacture  of  TV  sets  and  monitors  or  for  use  in  the  manufacture  of 
vehicles  of  Chapter  87 (2 ) 
0.5187 
ex 8529 90 92 
57 
Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of 
0 % 
p/st 
31.12.2021 
televisions,  monitors  and  video  players (2 ) 
0.6629 
ex 8529 90 92 
63 
LCD  module: 
0 % 
p/st 
31.12.2020 
—  with  a  diagonal  measurement  of  the  screen  of  14,5  cm  or  more  but  not  more  than 
38,5  cm, 
—  with  or  without  a  touch  screen, 
—  with  an  LED  backlight, 
—  with  a  printed  circuit  board  with  EEPROM,  microcontroller,  LVDS  receiver  and 
02013R1387 
other  active  and  passive  components, 
—  with  a  plug  for  power  supply  and  CAN  and  LVDS  interfaces, 
—  with  or  without  electronic  components  for  dynamic  adjustments  of  colour, 
—  in  a  housing,  with  or  without  mechanical,  touch-sensitive  or  contactless  control 
functions  and  with  or  without  active  cooling  system, 
suitable  for  installation  in  motor  vehicles  of  Chapter  87 (2 ) 
— 
EN — 
0.5018 
ex 8529 90 92 
67 
Colour  LCD  display  panel  for  LCD  monitors  of  heading  8528: 
0 % 
p/st 
31.12.2020 
01.07.2020 
—  with  a  diagonal  measurement  of  the  screen  of  14,48  cm  or  more  but  not  more  than 
31,24  cm, 
—  with  or  without  a  touch  screen, 
—  with  backlight,  micro-controller, 
—  with  a  CAN  (Controller  area  network)-controller  with  one  or  more  LVDS  (Low- 
— 
voltage  differential  signalling)  interfaces  and  one  or  more  CAN/power  supply 
013.001 
sockets  or  with  an  APIX  (Automotive  Pixel  Link)  controller  with  APIX  interface, 
—  in  a  housing  with  or  without  a  heat  sink  at  the  back  of  the  housing, 
—  without  a  signal-processing  module, 
—  whether  or  not  with  haptic  and  acoustical  feedback, 
— 
for  use  in  the  manufacture  of  vehicles  of  Chapter  87 (2 ) 
233
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5788 
ex 8529 90 92 
70 
Rectangular  fastening  and  covering  frame: 
0 % 
p/st 
31.12.2022 
—  of  an  aluminium  alloy  containing  silicon  and  magnesium, 
—  with  a  length  of  500  mm  or  more  but  not  more  than  2 200  mm, 
—  with  a  width  of  300  mm  or  more  but  not  more  than  1 500  mm, 
of  a  kind  used  for  the  production  of  TV  sets 
0.6781 
ex 8529 90 92 
85 
Colour  LCD  module  in  a  housing: 
0 % 
p/st 
31.12.2020 
—  with  a  diagonal  screen measurement of  14,48  cm  or  more  but  not  more  than  26  cm, 
—  without  touch  screen, 
—  with  a  backlight  and  micro-controller, 
—  with  a  CAN  (Controller  Area  Network)  controller,  an  LVDS  (Low-Voltage  Differ­
ential  Signalling)  interface  and  a  CAN/power  connector, 
—  without  a  signal  processing  module, 
—  with  control  electronics  for  pixel  addressing  only, 
—  with  a  motorised  mechanism  for  moving  the  display  screen, 
for  permanent  installation  in  vehicles  of  Chapter  87 (2 ) 
02013R1387 
0.4856 
ex 8535 90 00 
30 
Semiconductor  module  switch  in  a  casing: 
0 % 
p/st 
31.12.2020 
—  consisting  of  an  IGBT  transistor chip  and  a  diode  chip  on  one  or  more  lead  frames, 
—  for  a  voltage  of  600  V  or  1 200  V 
— 
EN — 
0.7048 
ex 8536 41 10 
20 
Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a 
0 % 
— 
31.12.2021 
01.07.2020 
galvanically  isolated  input  circuit  with  a  photovoltaic  generator  and  a  power  MOSFET 
output switch in a casing with connections for a voltage of 60 volts or less and a current 
of  2  amps  or  less 
— 
013.001 
0.6180 
ex 8536 41 90 
40 
Power  relay  with: 
0 % 
p/st 
31.12.2024 
—  electromechanical  and/or  electromagnetical  switching  function, 
—  a  load  current  of  3  A  or  more  but  not  more  than  16  A, 
—  a  coil  voltage  of  5  V  or  more  but  not  more  than  24  V,  and 
— 
—  a  distance  between  the  connector  pins  of  the  load  circuit  not  more  than  15,6  mm 
234
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7049 
ex 8536 41 90 
50 
Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a 
0 % 
— 
31.12.2021 
galvanically isolated input circuit with one or two photovoltaic generators and two power 
MOSFET  output  switches  in  a  casing  with  connections  for  a  maximum  voltage  of  60 
volts  and  a  minimum  current  of  2  amps 
0.7052 
ex 8536 49 00 
40 
Photoelectric  (so  called  photovoltaic)  relay  consisting  of  two  GaAlAs  light-emitting 
0 % 
— 
31.12.2021 
diodes,  two  galvanically  isolated  input  circuits  with  photovoltaic  generator(s)  and  four 
power MOSFET output switches in a casing with connections for a voltage of more than 
60  volts 
0.7796 
ex 8536 49 00 
50 
Relay  with: 
0 % 
— 
31.12.2024 
—  a  contact  current  carrying  capacity  of  5  A  or  more  but  not  more  than  15  A, 
—  a  nominal  voltage  of  80  V  or  more  but  not  more  than  270  V,  and 
—  outer  dimensions  of  19  mm  x  15,2  mm  x  15,5  mm, 
for  use  in  the  manufacture  of  control  boards  for  household  appliances (2 ) 
0.5795 
ex 8536 69 90 
51 
SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for 
0 % 
p/st 
31.12.2022 
use  in  the  manufacture  of  products  falling  within  headings  8521  and  8528 (2 ) 
02013R1387 
0.6849 
ex 8536 69 90 
60 
Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not 
0 % 
p/st 
31.12.2020 
more  than  10,8  mm,  for  use  in  the  production  of  hearing  aids  and  speech  processors (2 ) 
— 
0.4614 
ex 8536 69 90 
82 
Modular  socket  or  plug  for  local  area  networks,  whether  or  not  combined  with  other 
0 % 
p/st 
31.12.2024 
EN — 
sockets,  integrating  at  least: 
—  a  pulse  transformer,  including  a  wide-band  ferrite  core, 
—  a  common  mode  coil, 
01.07.2020 
—  a  resistor, 
—  a  capacitor, 
for  use  in  the  manufacture  of  products  falling  within  headings  8521  or  8528 (2 ) 
— 
0.5028 
ex 8536 69 90 
84 
Universal serial bus (USB) socket or plug in a single or multiple form for connecting with 
0 % 
p/st 
31.12.2020 
013.001 
other  USB  devices,  for  use  in  the  manufacture  of  goods  falling within  headings  8521  or 
8528 (2 ) 
— 
0.5318 
ex 8536 69 90 
85 
Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in 
0 % 
p/st 
31.12.2021 
235
the  manufacture  of  products  falling  within  headings  8521  or  8528 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.5316 
ex 8536 69 90 
86 
High-Definition  Multimedia  Interface (HDMI)  type  socket  or  plug,  built  into  a  plastic  or 
0 % 
p/st 
31.12.2021 
metal housing,  with 19  pins or 20  pins in 2 rows, for use in the manufacture of products 
falling  within  headings  8521  or  8528 (2 ) 
0.5181 
ex 8536 70 00 
10 
Optical  socket,  plug  or  connector,  for  use  in  the  manufacture  of  goods  falling  within 
0 % 
p/st 
31.12.2021 
headings  8521  or  8528 (2 ) 
▼M13 
0.7873 
ex 8537 10 91 
20 
Electronic  assembly  containing: 
0 % 
— 
31.12.2024 
—  a  microprocessor, 
—  a  programmable  memory  controller  and  other  electronic  components  mounted  on  a 
printed  circuit, 
—  with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators, 
for  use  in  the  manufacture  of  products  of  Subheadings  8418 21,  8418 29,  8421 12, 
8422 11,  8450 11,  8450 12,  8450 19,  8451 21,  8451 29  and  8516 60 (2 ) 
C3 
02013R1387 
0.6864 
ex 8537 10 91 
50 
Fuse  control  module  in  a  plastic  housing  with  mounting  brackets  comprising: 
0 % 
p/st 
31.12.2020 
—  sockets  with  or  without  fuses, 
—  connecting  ports, 
—  a  printed  circuit  board  with  embedded  microprocessor,  micro  switch  and  relay, 
— 
of  a  kind  used  in  the  manufacture  of  goods  of  chapter  87 
EN — 
0.7627 
ex 8537 10 91 
57 
Programmable  memory  control  board  with: 
0 % 
— 
31.12.2023 
—  4  or  more  stepper  motor  drivers, 
01.07.2020 
—  4  or  more  outputs  with  MOSFET  transistors, 
—  a  main  processor, 
—  3  or  more  inputs  for  temperature  sensors, 
—  for  a  voltage  of  10  V  or  more  but  not  more  than  30  V, 
for  use  in  the  manufacture  of  3D  printers (2 ) 
— 
013.001 
0.7609 
ex 8537 10 91 
59 
Electronic  control  units  for  controlling  inter  axle  torque  transferring  in  all-wheel  drive 
0 % 
— 
31.12.2023 
vehicles  including: 
—  a  printed  circuit  board  with  programmable  memory  controller, 
— 
—  one  single  connector,  and 
236
—  working  at  12  V 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6163 
ex 8537 10 91 
60 
Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with 
0 % 
p/st 
31.12.2023 
ex 8537 10 98 
45 
at  least: 
—  an  AC  power  input  of  208  V  or  more  but  not  more  than  400  V, 
—  a  logic  power  input  of  24  V  DC, 
—  an  automatic  circuit  breaker, 
—  a  main  power  switch, 
—  internal  or  external  electrical  connectors  and  cables, 
—  in a housing  with dimension of 281  mm x 180  mm x 75  mm or more, but not more 
than  630  mm  x  420  mm  x  230  mm, 
of  a  kind  used  for  manufacturing  recycling  or  sorting  machines 
0.7610 
ex 8537 10 91 
63 
Electronic  control  units  able  to  control  automatic  continuous  variable  transmission  for 
0 % 
— 
31.12.2023 
passenger  vehicles  including: 
—  a  printed  circuit  board  with  programmable  memory  controller, 
—  a  metallic  housing, 
—  one  single  connector, 
—  working  at  12  V 
02013R1387 
0.7360 
ex 8537 10 91 
65 
Electronic  control  unit  for  optimal  engine  performance: 
0 % 
— 
31.12.2022 
—  with  a  programmable  memory, 
— 
—  with  a  voltage  of  8  V  or  more  but  not  more  than  16  V, 
—  with  at  least  one  composite  connector, 
EN — 
—  in  a  metal  housing, 
—  whether  or  not  with  metal  holders, 
01.07.2020 
for  use  in  the  manufacture  of  motor  vehicles (2 ) 
0.7660 
ex 8537 10 91 
67 
Electronic  Engine  Control  Unit  (ECU)  with: 
0 % 
— 
31.12.2023 
— 
—  a  printed  circuit  board  (PCB), 
013.001 
—  12  Volts  voltage, 
—  reprogrammable, 
—  a micro-processor that can control, evaluate and  manage  support  service  functions in 
cars  (injection  and  ignition  advance  values  of  fuel,  fuel  and  air  flow  rate), 
— 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
237
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7251 
ex 8537 10 91 
70 
Programmable motor memory controller for a voltage not exceeding 1 000 V, comprising 
0 % 
p/st 
31.12.2022 
at  least: 
—  a  printed  circuit  with  active  and  passive  components, 
—  an  aluminium  housing,  and 
—  multiple  connectors 
C3 
0.6140 
ex 8537 10 98 
30 
Motor  bridge  ICs  without  programmable  memory  consisting  of: 
0 % 
p/st 
31.12.2023 
—  one  or  more  integrated  circuits,  not  interconnected,  on  separate  lead  frames, 
—  also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC 
motors  in  cars, 
02013R1387 
—  mounted  in  a  plastic  housing 
0.6889 
ex 8537 10 98 
35 
Electronic control unit  without  memory,  for a voltage  of 12  V,  for information exchange 
0 % 
p/st 
31.12.2020 
— 
systems  in  vehicles  (for connection  of  audio,  telephony,  navigation,  camera  and  wireless 
EN — 
car  service)  containing: 
—  2  rotary  knobs, 
—  27  or  more  pushbuttons, 
01.07.2020 
—  LED  lights, 
—  2  integrated  circuits  for  receiving  and  sending  of  control  signals  via  the  LIN-bus 
— 
0.6508 
ex 8537 10 98 
40 
Electronic  control  unit  for  monitoring  car  vehicle  tyre  pressure  comprising  plastic  box 
0 % 
p/st 
31.12.2024 
013.001 
with  printed  circuit  board  inside  and  with  or  without  metal  holder,  of: 
—  a  length  of  50  mm  or  more,  but  not  more  than  120  mm, 
—  a  width  of  20  mm  or  more  but  not  more  than  40  mm, 
—  a  height  of  30  mm  or  more,  but  not  more  than  120  mm, 
— 
of  a  kind  used  in  the  manufacture  of  goods  of  Chapter  87 
238
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6507 
ex 8537 10 98 
50 
Electronic  control  unit  BCM  (Body  Control  Module)  comprising: 
0 % 
p/st 
31.12.2024 
—  plastic  box  with  printed  circuit  board  and  metal  holder, 
—  with  voltage  of  9V  or  more,  but  not  more  than  16V, 
—  able to control, evaluate and manage functions of assisting services in an automobile, 
at  least  wiper  timing,  window  heating,  interior  lighting,  seat  belt  reminder, 
of  a  kind  used  in  the  manufacture  of  goods  of  Chapter  87 
0.6520 
ex 8537 10 98 
60 
Electronic  assembly  consisting  of: 
0 % 
p/st 
31.12.2024 
—  a  microprocessor, 
—  light-emitting  diode  (LED)  or  liquid  crystal  display  (LCD)  indicators, 
—  electronic  components  mounted  on  a  printed  circuit, 
for  use  in  the  manufacture  of  built-in  products  of  subheadings  8514 20 80,  8516 50 00 
and  8516 60 80 (2 ) 
0.7194 
ex 8537 10 98 
65 
Lever  for  control  module  under  the  steering  wheel: 
0 % 
p/st 
31.12.2021 
02013R1387 
—  with one or more single or multi-positional electrical switches (push-button, rotary or 
other), 
—  whether  or  not  equipped  with  printed  circuit  boards  and  electrical  cables, 
—  for  a  voltage  of  9  V  or  more  but  not  more  than  16  V, 
of  a  kind  used  in  the  manufacture  of  motor  vehicles  of  Chapter  87 
— 
EN — 
0.7171 
ex 8537 10 98 
75 
Control  unit  for  keyless  access  to  vehicle  and  vehicle  starting,  with  electrical  switching 
0 % 
p/st 
31.12.2021 
01.07.2020 
apparatus,  in  a  plastic  housing,  for  a  voltage  of  12  V,  whether  or  not  with: 
—  an  antenna, 
—  a  connector, 
—  a  metal  holder, 
— 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
013.001 
0.3663 
ex 8537 10 98 
93 
Electronic  control  units  for  a  voltage  of  12  V,  for  use  in  the  manufacture  of  vehicle 
0 % 
p/st 
31.12.2023 
— 
mounted  temperature  control  systems (2 ) 
239
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.6866 
ex 8538 90 91 
20 
Interior  antenna  for  a  car  door  locking  system,  comprising: 
0 % 
p/st 
31.12.2020 
ex 8538 90 99 
50 
—  an  antenna  module  in  a  plastic  housing, 
—  a  connection  cable  with  a  plug, 
—  at  least  two  mounting  brackets, 
—  whether  or  not  PCB  including  integrated  circuits,  diodes  and  transistors, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
C3 
0.6397 
ex 8538 90 99 
30 
Polycarbonate  or  acrylonitrile  butadiene  styrene  covers  and  cases  for  steering  pad 
0 % 
p/st 
31.12.2024 
ex 8547 20 00 
10 
switches  whether  or  not  coated  on  the  outside  with  a  scratch  resistant  paint 
0.6399 
ex 8538 90 99 
40 
Polycarbonate  control  interface  buttons  for  steering  pad  switches  coated  on  the  outside 
0 % 
p/st 
31.12.2024 
with  scratch  resistant  paint,  in  immediate  packages  of  500  pieces  or  more 
02013R1387 
0.7195 
ex 8538 90 99 
60 
Front  control  panel,  in  the  form  of  a  plastic  box,  with  light  guides,  rotary  switches, 
0 % 
p/st 
31.12.2021 
pressure  switches  and  buttons  switches,  or  other  type  of  switches,  without  any  electrical 
component,  of  a  kind  used  in  the  dashboard  of  motor  vehicles  of  Chapter  87 
— 
▼M13 
EN — 
0.5953 
ex 8538 90 99 
95 
Copper  base  plate,  containing  more  components  than  Insulated  Gate  Bipolar  Transistor 
0 % 
p/st 
31.12.2023 
(IGBT) chips and diodes with a voltage of 650 V or more but not more than 1 200 V, for 
01.07.2020 
use  as  a  heatsink  in  the  manufacture  of  IGBT  modules (2 ) 
C3 
— 
013.001 
0.2580 
ex 8540 20 80 
91 
Photomultiplier 
0 % 
— 
31.12.2021 
0.3959 
ex 8540 71 00 
20 
Continuous  wave  magnetron  with  a  fixed  frequency  of  2 460  MHz,  packaged  magnet, 
0 % 
— 
31.12.2023 
— 
probe  output,  for  use  in  the  manufacture  of  products  falling  within  subheading 
240
8516 50 00 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.3445 
ex 8540 89 00 
91 
Displays  in  the  form  of  a  tube  consisting  of  a  glass  housing  mounted  on  a  board  the 
0 % 
— 
31.12.2023 
dimensions  of  which  do  not  exceed  300  mm  ×  350  mm  excluding  leads.  The  tube 
contains  one  or  more  rows  of  characters  or  lines  arranged  in  rows,  each  character  or 
line consisting of fluorescent or phosphorescent elements. These elements are mounted on 
a  metallised  base  which  is  covered  with  fluorescent  substances  or  phosphorescent  salts 
which  give  off  light  when  bombarded  with  electrons 
0.3443 
ex 8540 89 00 
92 
Vacuum  fluorescent  display  tube 
0 % 
— 
31.12.2023 
0.7409 
ex 8540 91 00 
20 
Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21- 
0 % 
— 
31.12.2022 
8)  or  cerium  hexaboride  (CAS  RN  12008-02-5),  in  a  metal  housing  with  electric 
connectors  having: 
—  a  graphite  carbon  shield  mounted  in  a  mini-Vogel  type  system, 
—  separate  pyrolytic  carbon  blocks  used  as  heating  elements,  and 
—  a  cathode  temperature  of  less  than  1800  K  at  a  filament  current  of  1,26  A 
02013R1387 
0.7130 
ex 8543 70 90 
15 
Laminated  electrochromic  film  consisting  of: 
0 % 
— 
31.12.2021 
—  two  outer  layers  of  polyester, 
—  a  middle  layer  of  acrylic  polymer  and  silicone,  and 
—  two  electric  connection  terminals 
— 
EN — 
0.2826 
ex 8543 70 90 
30 
Amplifier,  consisting  of  active  and  passive  elements  mounted  on  a  printed  circuit, 
0 % 
p/st 
31.12.2023 
contained  in  a  housing 
01.07.2020 
0.7055 
ex 8543 70 90 
33 
High-frequency  amplifier  comprising  one  or  more  integrated  circuits  and  one  or  more 
0 % 
— 
31.12.2021 
discrete capacitor  chips,  whether  or  not  with  IPD  (integrated passive  devices) on  a  metal 
— 
flange  in  a  housing 
013.001 
0.7053 
ex 8543 70 90 
34 
Gallium  nitride  (GaN)  high-frequency  amplifier  consisting  of  one  or  more  discrete  tran­
0 % 
— 
31.12.2021 
— 
sistors, one  or more discrete capacitor chips, whether or not with IPD (integrated passive 
devices)  on  a  metal  flange  in  a  housing 
241
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2822 
ex 8543 70 90 
35 
Radio  frequency  (RF)  modulator,  operating  with  a  frequency  range  of  43  MHz  or  more 
0 % 
p/st 
31.12.2023 
but  not  more  than  870  MHz,  capable  of  switching  VHF  and  UHF  signals,  consisting  of 
active  and  passive  elements  mounted  on  a  printed  circuit,  contained  in  a  housing 
0.2590 
ex 8543 70 90 
45 
Piezo-electric  crystal  oscillator  with  a  fixed  frequency,  within  a  frequency  range  of  1,8 
0 % 
p/st 
31.12.2023 
MHz  to  67  MHz,  contained  in  a  housing 
0.3131 
ex 8543 70 90 
55 
Opto-electronic  circuit comprising  one  or  more  light-emitting diodes  (LEDs),  whether  or 
0 % 
p/st 
31.12.2023 
not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, 
whether  or  not  with  an  integrated  logic  gate  arrays  circuit  or  one  or  more  light-emitting 
diodes  and  at  least  2  photodiodes  with  an  amplifier  circuit,  whether  or  not  with  an 
integrated  logic  gate  arrays  circuit  or  other  integrated  circuits,  contained  in  a  housing 
02013R1387 
0.2820 
ex 8543 70 90 
80 
Temperature compensated oscillator, comprising a printed circuit on which are mounted at 
0 % 
p/st 
31.12.2023 
least  a  piezo-electric  crystal  and  an  adjustable  capacitor,  contained  in  a  housing 
— 
EN — 
0.2816 
ex 8543 70 90 
85 
Voltage  controlled  oscillator  (VCO),  other  than  temperature  compensated  oscillators, 
0 % 
p/st 
31.12.2023 
consisting  of  active  and  passive  elements  mounted  on  a  printed  circuit,  contained  in  a 
01.07.2020 
housing 
— 
0.4995 
ex 8543 70 90 
95 
Mobile  telephone  view  and  control  module  comprising  of: 
0 % 
p/st 
31.12.2020 
—  a  mains  power/  CAN  (Controller  area  network)  output  socket, 
013.001 
—  a  universal  serial  bus  (USB)  and  audio  IN/OUT  ports  and 
—  incorporating  a  video  switching  device  for  the  interface  of  smart  phone  operating 
systems  with  the  Media  Orientated  Systems  Transport  network  (MOST), 
— 
for  use  in  the  manufacture  of  vehicles  of  Chapter  87 (2 ) 
242
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.4464 
ex 8544 20 00 
10 
PET/PVC  insulated  flexible  cable  with: 
0 % 
— 
31.12.2023 
ex 8544 42 90 
20 
—  a  voltage  of  not  more  than  60  V, 
ex 8544 49 93 
20 
—  a  current  of  not  more  than  1  A, 
—  a  heat  resistance  of  not  more  than  105  °C, 
—  individual wires of a thickness of not more than 0,1  mm (±0,01 mm) and a width of 
not  more  than  0,8  mm  (±0,03  mm), 
—  a  distance  between  conductors  of  not  more  than  0,5  mm,  and 
—  a  pitch  (distance  from  centreline  to  centreline  of  conductors)  of  not  more  than  1,25 
mm 
0.6709 
ex 8544 20 00 
30 
Antenna  connecting  cable  for  the  transmission  of  radio  (AM/FM)  signal  and  whether  or 
0 % 
— 
31.12.2021 
not  GPS  signal,  containing: 
—  a  coaxial  cable, 
—  two  or  more  connectors,  and 
—  3  or  more  plastic  clips  for  attachment  to  the  dashboard, 
of  a  kind  used  in  the  manufacture  of  goods  of  Chapter  87 
02013R1387 
0.6194 
ex 8544 30 00 
30 
Multi-measurement  wire  harness  of  a  voltage  of  5V  or  more  but  not  more  than  90  V 
0 % 
p/st 
31.12.2023 
capable  of  measuring  some  or  all  of  the  following: 
—  a  travel  speed  of  not  more  than  24  km/h, 
—  a  motor  speed  of  not  more  than  4 500  rpm, 
—  hydraulic  pressure  of  not  more  than  25  Mpa, 
—  mass  of  not  more  than  50  metric  tonnes, 
— 
for  use  in  the  manufacture  of  vehicles  of  heading  8427 (2 ) 
EN — 
01.07.2020 
0.7006 
ex 8544 30 00 
35 
Wire  harness: 
0 % 
— 
31.12.2021 
—  with  an  operation  voltage  of  12V, 
—  wrapped  in  tape  or  covered  in  plastic  convoluted  tubing, 
—  with  16  or  more  strands,  with  all  terminals  to  be  tin  plated  or  equipped  with 
connectors, 
— 
for  use  in  the  manufacture  of  all-terrain  or  utility  task  vehicles (2 ) 
013.001 
0.6377 
ex 8544 30 00 
40 
Wire  harness  of  the  steering  system  with  an  operating  voltage  of  12  V,  equipped  with 
0 % 
p/st 
31.12.2024 
— 
ex 8544 42 90 
40 
connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor 
vehicle  steering  box 
243
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7848 
ex 8544 30 00 
45 
Linking  seven-core  cable  for  connecting  sensor  for  pressure  measure  in  intake  manifold 
0 % 
— 
31.12.2024 
(Boost  Pressure  Sensor  –  BPS)  and  sockets  for  glow  plugs  with  common  connector, 
containing  four  sockets  and  two  connectors  for  use  in  the  manufacture  of  compression- 
ignition  internal  combustion  piston  engines  for  passenger  cars (2 ) 
0.7847 
ex 8544 30 00 
55 
Connecting  five-core  cable  with  connectors  for  coupling  the  temperature  sensor  and  the 
0 % 
— 
31.12.2024 
exhaust  manifold  pressure  difference  sensor  to  the  common  connector  for  use  in  the 
manufacture  of  compression-ignition  internal  combustion  piston  engines  for  passenger 
cars (2 ) 
0.6710 
ex 8544 30 00 
60 
Four-core  connecting  cable  containing  two  female  connectors  for  the  transmission  of 
0 % 
— 
31.12.2020 
ex 8544 42 90 
50 
digital  signals  from  navigation  and  audio  systems  to  a  USB  connector,  for  use  in  the 
manufacture  of  goods  of  Chapter  87 (2 ) 
C3 
0.6323 
ex 8544 30 00 
70 
Multi-measurement  wire  harness: 
0 % 
p/st 
31.12.2024 
—  of  a  voltage  of  5  V  or  more  but  not  more  than  90  V, 
02013R1387 
—  capable  of  transmitting  information, 
for  use  in  the  manufacture  of  vehicles  of  heading  8711 (2 ) 
▼M13 
— 
0.6867 
ex 8544 30 00 
85 
Extension  two-core  cable  with  two  connectors,  containing  at  least: 
0 % 
p/st 
31.12.2020 
EN — 
—  a  rubber  grommet, 
—  a  metal  attachment  bracket, 
of  a  kind  used  to  connect  vehicle  speed  sensors  in  the  manufacture  of  vehicles  of 
01.07.2020 
Chapter  87 
C3 
— 
0.4980 
ex 8544 42 90 
10 
Data  transmission  cable  capable  of  a  bit  rate  transmission  of  600  Mbit/s  or  more,  with: 
0 % 
p/st 
31.12.2023 
013.001 
—  a  voltage  of  1,25  V  (±0,25  V), 
—  connectors fitted at one or both ends, at least one of which contains pins with a pitch 
of  1  mm, 
—  outer  screening  shielding, 
— 
used solely for communication between LCD, PDP or OLED panel and video processing 
244
electronic  circuits 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7545 
ex 8544 42 90 
15 
PVC  isolated  flexible  eight  wire  cable  with: 
0 % 
— 
31.12.2023 
—  a  length  of  not  more  than  2 100  mm, 
—  an  operating  voltage  of  5  V  or  more,  but  not  more  than  35  V, 
—  a  temperature  resistance  of  not  more  than  80  °C, 
—  either  an  over-moulded  7  pin  round  270°  DIN  male  connector,  a  6  pin  A1101  male 
connector  or  a  8  pin  A1001  male  connector  on  one  end,  and 
—  at  least  two  stripped  and  tinned  wires  on  the  other  end, 
—  whether  or  not  with  mounted  rubber  pad  with  integrated  strain  relief 
0.7538 
ex 8544 42 90 
25 
PVC  isolated  flexible  cable  with: 
0 % 
— 
31.12.2023 
—  a  length  of  not  more  than  1 800  mm, 
—  an  operating  voltage  of  5  V  or  more,  but  not  more  than  35  V, 
—  a  heat  resistance  of  not  more  than  80  °C, 
—  an  over-moulded  8  pin  MiniFit  male  connector  on  one  end, 
—  either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end, 
—  a  over-moulded  resistor  inside  the  connector,  and 
—  a  moulded  strain  relief  on  the  cable, 
—  whether  or  not  with  a  over-moulded  diode  inside  a  connector 
02013R1387 
0.7544 
ex 8544 42 90 
35 
PVC  isolated  flexible  six  or  eight  wire  cable  with: 
0 % 
— 
31.12.2023 
—  a  length  of  not  more  than  1 300  mm, 
—  an  operating  voltage  of  5  V  or  more,  but  not  more  than  35  V, 
—  a  heat  resistance  of  not  more  than  80  °C, 
—  either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN 
— 
male  connector  on  one  end,  and 
EN — 
—  either an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on 
the  other  end 
01.07.2020 
0.6853 
ex 8544 42 90 
70 
Electric  conductors: 
0 % 
p/st 
31.12.2020 
—  of  a  voltage  of  not  more  than  80  V, 
—  with  a  length  of  not  more  than  120  cm, 
—  fitted  with  connectors, 
— 
for  use  in  the  manufacture  of  hearing  aids,  accessory  kits  and  speech  processors (2 ) 
013.001 
0.7173 
ex 8544 42 90 
80 
12-wire  connecting  cable  containing  two  connectors 
0 % 
p/st 
31.12.2021 
—  of  a  voltage  of  5  V, 
— 
—  with  a  length  of  not  more  than  300  mm, 
245
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.2424 
ex 8544 49 93 
10 
Elastomeric  connector,  of  rubber  or  silicone,  consisting  of  one  or  more  conductor 
0 % 
p/st 
31.12.2023 
elements 
0.6861 
ex 8544 49 93 
30 
Electric  conductors: 
0 % 

31.12.2020 
—  of  a  voltage  of  not  more  than  80  V, 
—  of  a  platinum-iridium-alloy, 
—  coated  with  poly(tetrafluoroethylene), 
—  without  connectors, 
for  use  in  the  manufacture  of  hearing  aids,  implants  and  speech  processors (2 ) 
▼M13 
0.5002 
ex 8545 90 90 
40 
Corrosion  resistant,  layered  technical  fibre  substrate  of  a  gas  diffuser  layer  with: 
0 % 
m2 
31.12.2020 
—  controlled  fibre  length,  flex  strength,  porosity,  thermal  conductance,  electrical  resis­
tance, 
—  a  thickness  of  less  than  600  μm, 
—  a  weight  of  less  than  500  g/m2 
02013R1387 
C3 
0.5183 
ex 8548 10 29 
10 
Spent  lithium-ion  or  nickel  metal  hydride  electric  accumulators 
0 % 
— 
31.12.2023 
0.3144 
ex 8548 90 90 
41 
Unit,  consisting  of  a  resonator  operating  within  a  frequency  range  of  1,8  MHz  or  more 
0 % 
p/st 
31.12.2023 
— 
but  not  more  than  40  MHz  and  a  capacitor,  contained  in  a  housing 
EN — 
0.3193 
ex 8548 90 90 
43 
Contact  image  sensor 
0 % 
p/st 
31.12.2023 
01.07.2020 
0.3763 
ex 8548 90 90 
48 
Optical  unit,  containing  at  least: 
0 % 
p/st 
31.12.2021 
—  a laser diode and  a photodiode operating at a typical wavelength of 635  nm or more 
but  not  more  than  815  nm, 
—  an  optical  lens, 
— 
—  a  'Recording  Photodetector  Integrated  Circuit'  (PDIC), 
013.001 
—  a  focussing  and  tracking  actuator 
0.3965 
ex 8548 90 90 
65 
LCD  modules: 
0 % 
p/st 
31.12.2023 
— 
—  solely  consisting  of  one  or  more  TFT  glass  or  plastic  cells, 
246
—  combined  with  touch  screen  facilities, 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
—  with one or more printed circuits boards with control electronics for pixel addressing 
only, 
—  with  or  without  backlight  unit,  and 
—  with  or  without  inverters 
0.7165 
ex 8708 10 10 
10 
Plastic  cover  for  filling  the  space  between  the  fog  lights  and  the  bumper  whether  or  not 
0 % 
p/st 
31.12.2021 
ex 8708 10 90 
10 
with  a  chrome  strip  for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.6513 
ex 8708 30 10 
20 
Motor  powered  brake  actuation  unit: 
0 % 
p/st 
31.12.2024 
ex 8708 30 91 
60 
—  with  a  rating  of  13,5  V  (±0,5V),  and 
ex 8708 30 99 
10 
—  a  ball  screw  mechanism  to  control  brake  fluid  pressure  in  the  master  cylinder, 
for  use  in  the  manufacture  of  electric  motor  vehicles (2 ) 
0.6590 
ex 8708 30 10 
40 
Body  of  disc  type  brake  in  BIR  ('Ball  in  Ramp')  or  EPB  ('Electronic  Parking  Brake')  or 
0 % 
p/st 
31.12.2024 
ex 8708 30 91 
30 
with  hydraulic  function  only,  containing  functional  and  mounting  openings  and  guide 
grooves,  of  a  kind  used  in  the  manufacture  of  goods  of  Chapter  87 
02013R1387 
0.4999 
ex 8708 30 10 
50 
Drum  type  parking  brake: 
0 % 
p/st 
31.12.2021 
ex 8708 30 91 
10 
—  operating  within  the  service  brake  disk, 
—  with  a  diameter  of  170  mm  or  more  but  not  more  than  195  mm, 
for  use  in  the  manufacture  of  motor  vehicles (2 ) 
— 
EN — 
0.6502 
ex 8708 30 10 
60 
Non-asbestos  organic  brake  pads  with  friction  material  mounted  to  the  band  steel  back 
0 % 
p/st 
31.12.2024 
ex 8708 30 91 
20 
plate  for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
01.07.2020 
0.6707 
ex 8708 30 10 
70 
Ductile  cast  iron  brake  caliper  jaw,  of  a  kind  used  in  the  manufacture  of  goods  of 
0 % 
p/st 
31.12.2020 
ex 8708 30 91 
40 
Chapter  87 
— 
013.001 
0.6869 
ex 8708 40 20 
20 
Automatic  hydrodynamic  gearbox: 
0 % 
p/st 
31.12.2020 
ex 8708 40 50 
10 
—  with  a  hydraulic  torque  converter, 
—  without  transfer  box  and  cardan  shaft, 
— 
—  whether  or  not  with  front  differential, 
for  use  in  the  manufacture  of  motor  vehicles  of  Chapter  87 (2 ) 
247
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7253 
ex 8708 40 20 
30 
Automatic  gearbox  with  a  hydraulic  torque  converter  with: 
0 % 
p/st 
31.12.2022 
—  at  least  eight  gears, 
—  an  engine  torque  of  300  Nm  or  more,  and 
—  transverse  or  longitudinal  installation, 
for  use  in  the  manufacture  of  motor  vehicles  of  heading  8703 (2 ) 
0.7011 
ex 8708 40 20 
40 
Gear  box  assembly  with  one  or  two  inputs  and  at  least  three  outputs  in  cast  aluminium 
0 % 
p/st 
31.12.2021 
ex 8708 40 50 
30 
housing with overall dimensions (excluding the shafts) of not more than 455 mm (width) 
x  462  mm  (height),  680  mm  length,  equipped  with  at  least: 
—  one  exterior-splined  output  shaft, 
—  a  rotary  switch  to  indicate  gear  position, 
—  the  potential  for  a  differential 
for  use  in  the  manufacture  of  all-terrain  or  utility  task  vehicles (2 ) 
0.7383 
ex 8708 40 20 
50 
Transmission  assembly  which  houses  3  other  shafts  inside  it  and  offers a  rotating switch 
0 % 
— 
31.12.2022 
ex 8708 40 50 
40 
for  shift  position  consisting: 
02013R1387 
—  cast  aluminium  body, 
—  differential  gear, 
—  2  electrical  motors  and  gears, 
with  the  dimensions  of: 
—  a  width  of  280  mm  or  more  but  not  more  than  470  mm, 
—  a  height  of  350  mm  or  more  but  not  more  than  595  mm, 
— 
—  a  length  of  410  mm  or  more  but  not  more  than  690  mm, 
EN — 
for  use  in  the  manufacture  of  motor  vehicles  of  Chapter  87 (2 ) 
01.07.2020 
0.7655 
ex 8708 40 20 
60 
Automatic  transmission  assembly  with  rotary  gear  shifter  with: 
0 % 
— 
31.12.2023 
ex 8708 40 50 
50 
—  aluminium  casting  housing, 
—  differential  gear, 
—  9  Speed  automatic, 
— 
—  electronic  range  select  gear  selection  system, 
013.001 
with  dimensions  of: 
—  a  width  of  330  mm  or  more  but  not  more  than  420  mm, 
—  a  height  of  380  mm  or  more  but  not  more  than  450  mm, 
—  a  length  of  580  mm  or  more  but  not  more  than  690  mm, 
— 
for  use  in  the  manufacture  of  the  vehicles  in  heading  87 (2 ) 
248
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7856 
ex 8708 40 20 
70 
Manual  gearbox  in  cast  aluminium  housing  for  transverse  installation  with: 
0 % 
— 
31.12.2024 
ex 8708 40 50 
60 
—  a  width  of  not  more  than  480  mm, 
—  a  height  of  not  more  than  400  mm, 
—  a  length  of  not  more  than  550  mm, 
—  five  gears, 
—  a  differential  gear, 
—  an  engine  torque  of  250  Nm  or  less, 
for  use  in  the  manufacture  of  motor  vehicles  of  Heading  8703 (2 ) 
C3 
0.6648 
ex 8708 50 20 
20 
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without 
0 % 
p/st 
31.12.2020 
ex 8708 50 99 
10 
any  joint  in  the  middle: 
02013R1387 
—  of  a  length  of  1  m  or  more  but  not  more  than  2  m, 
—  of  a  weight  of  6  kg  or  more  but  not  more  than  9  kg 
0.7014 
ex 8708 50 20 
40 
Single input, dual output  gearcase (transmission) in cast aluminium housing,  with overall 
0 % 
p/st 
31.12.2021 
— 
ex 8708 50 99 
30 
dimensions  not  exceeding  148  mm  (± 1  mm) x  213  mm  (± 1  mm) x  273  mm  (± 1  mm) 
ex 8708 99 10 
70 
comprising  at  least: 
EN — 
ex 8708 99 97 
80 
—  two  electro-magnetic one  direction  clutches  in  one  cage,  working  in  both  directions, 
—  an  input  shaft  with  outer  diameter  of  24  mm  (±  1  mm),  ended  with  spline  of  22, 
01.07.2020 
—  a coaxial output bushing with inner diameter of 22 mm or more but not more than 30 
mm,  ended  with  spline  of  22  teeth  or  more  but  not  more  than  28  teeth, 
for  use  in  the  manufacture  of  all-terrain  or  utility  task  vehicles (2 ) 
— 
0.7359 
ex 8708 50 20 
50 
Double  flange  bearing  of  3rd  generation,  for  motor  vehicles, 
0 % 
— 
31.12.2022 
013.001 
ex 8708 50 55 
20 
—  with  double-row  ball  bearing, 
ex 8708 50 91 
10 
—  whether  or  not  with  impulse  (encoder)  ring, 
ex 8708 50 99 
40 
—  whether  or  not  with  antilock  brake  system  (ABS)  sensor, 
— 
—  whether  or  not  with  mounted  screws, 
for  use  in  the  manufacture  of  goods  of  chapter  87 (2 ) 
249
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.7581 
ex 8708 50 20 
60 
Car transfer case with single input and dual output, to distribute torque between front and 
0 % 
— 
31.12.2024 
ex 8708 50 99 
15 
rear axles in an aluminium housing, with dimension of not more than 565 mm × 570 mm 
ex 8708 99 10 
45 
×  510  mm,  comprising: 
ex 8708 99 97 
65 
—  at  least  an  actuator, 
—  whether  or  not  an  interior  distribution  by  chain 
C3 
0.7692 
ex 8708 50 20 
65 
Intermediate  steel  shaft  connecting  the  gearbox  with  semi-axle  with: 
0 % 
— 
31.12.2023 
ex 8708 50 99 
20 
—  a  length  of  300  mm  or  more  but  not  more  than  650  mm, 
—  a  spline  end  on  both  sides, 
—  whether  or  not  with  a  pressed  bearing  in  the  case, 
—  whether  or  not  with  a  holder, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.7593 
ex 8708 50 20 
70 
Housing  of  tripod type  half shaft inboard  joint  for transmitting a  torque from engine  and 
0 % 
— 
31.12.2023 
ex 8708 50 99 
25 
transmission  to  wheels  of  motor  vehicles  with: 
02013R1387 
—  an  outer  diameter  of  67,0  mm  or  more  but  not  more  than  84,5  mm, 
—  3  cold  calibrated  roller  tracks  with  a  diameter  of  29,90  mm  or  more  but  not  more 
than  36,60  mm, 
—  sealing  diameter  34,0  mm  or  more  but  not  more  than  41,0  mm,  without  lead  angle, 
—  spline  with  21  teeth  or  more  but  not  more  than  35, 
—  bearing  seat  diameter  of  25,0  mm  or  more  but  not  more  than  30,0  mm,  with  or 
— 
without  oil  grooves 
EN — 
0.7640 
ex 8708 50 20 
75 
Outboard joint assembly for transmitting a torque from engine and transmission to wheels 
0 % 
— 
31.12.2023 
01.07.2020 
ex 8708 50 99 
35 
of  motor  vehicles,  consisting  of: 
—  an  inner  race  with  6  ball  tracks  for  running  with  the  bearing  balls  with  a  diameter 
15,0  mm  or  more  but  not  more  than  20,0  mm, 
—  an  outer  race with  6  ball  tracks for  running  with  6  bearing  balls,  made  of  steel  with 
carbon  content  of 0,45 %  or more but  not  more  than 0,58 %, with  thread and  with  a 
— 
spline  with  26  teeth  or  more  but  not  more  than  38, 
013.001 
—  a  spherical cage  keeping  bearing  balls  in  the  ball tracks  of  outer  race  and  inner  race 
in  proper  angular  position,  made  of  material  suitable  for  carburizing  with  carbon 
content  of  0,14 %  or  more  but  not  more  than  0,25 %,  and 
—  with  a  grease  compartment, 
— 
capable  of  working  at  constant  speed  at  variable  articulation  angle  not  higher  than  50 
250
degrees 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.6711 
ex 8708 80 20 
10 
Upper  strut  insulator  containing: 
0 % 
p/st 
31.12.2020 
ex 8708 80 35 
10 
—  a  metal  holder  with  three  mounting  screws,  and 
—  a  rubber  bump, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.6705 
ex 8708 80 20 
20 
Rear  chassis  arm  with  a  protective  plastic  label  equipped  with  two  metal  casings  with 
0 % 
p/st 
31.12.2020 
ex 8708 80 91 
10 
pressed-in  rubber  silent  blocks,  for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.6704 
ex 8708 80 20 
30 
Rear  chassis  arm  equipped  with  a  ball  pivot  and  metal  casing  with  a  pressed-in  rubber 
0 % 
p/st 
31.12.2020 
ex 8708 80 91 
20 
silent  block,  for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
C3 
0.7164 
ex 8708 80 99 
10 
Stabilizer  bar  for  front  axle  equipped  with  a  ball  pivot  on  both  ends  for  use  in  the 
0 % 
p/st 
31.12.2021 
manufacture  of  goods  of  Chapter  87 (2 ) 
0.7607 
ex 8708 80 99 
20 
Aluminium  suspension  link  arm,  with  dimensions  of: 
0 % 
p/st 
31.12.2023 
02013R1387 
—  a  height  of  50  mm  or  more  but  not  more  than  150  mm, 
—  a  width  of  10  mm  or  more  but  not  more  than  100  mm, 
—  a  length  of  100  mm  or  more  but  not  more  than  600  mm, 
—  a  mass  of  1000  g  or  more  but  not  more  than  3000  g, 
equipped  with  at  least  two  bushed  holes  made  of  aluminium  alloy  with  the  following 
characteristics: 
— 
—  a  tensile  strength  of  200  MPa  or  more, 
EN — 
—  a  strength  of  19  kN  or  more, 
—  a  stiffness  of  5  kN/mm  or  more  but  not  more  than  9  kN/mm, 
—  a  frequency  of  400  Hz  or  more  but  not  more  than  600  Hz 
01.07.2020 
0.6509 
ex 8708 91 20 
20 
Aluminium  cooler  using  compressed  air  with  a  ribbed  design  of  a  kind  used  in  the 
0 % 
p/st 
31.12.2024 
ex 8708 91 35 
10 
manufacture  of  goods  of  Chapter  87 
— 
0.6859 
ex 8708 91 20 
30 
Aluminium  alloy  inlet  or  outlet  air  tank  manufactured  to  standard  EN  AC  42100  with: 
0 % 
p/st 
31.12.2020 
013.001 
ex 8708 91 99 
30 
—  an  insulating  area  flatness  of  not  more  than  0,1  mm, 
—  a  permissible  particle  quantity  of  0,3  mg  per  tank, 
—  a  distance  between  pores  of  2  mm  or  more, 
—  pore  sizes  of  not  more  than  0,4  mm,  and 
— 
—  not  more  than  3  pores  larger  than  0,2  mm, 
251
of  a  kind  used  in  heat  exchangers  for  car  cooling  systems 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7231 
ex 8708 91 99 
40 
Assembly  for  supplying  compressed  air,  whether  or  not  with  a  resonator,  comprising  at 
0 % 
— 
31.12.2022 
ex 8708 99 97 
55 
least: 
—  one  solid  aluminium  tube  whether  or  not  with  mounting  bracket, 
—  one  flexible  rubber  hose,  and 
—  one  metal  clip, 
for  use  in  the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.7665 
ex 8708 92 99 
10 
Exhaust  system  inner  liner: 
0 % 
— 
31.12.2023 
—  with  a  wall  thickness  of  0,7  mm  or  more  but  not  more  than  1,3  mm, 
—  made of stainless steel sheets or coil class 1.4310  and  1.4301  according to norm EN 
10088, 
—  whether  or  not  with  mounting  holes, 
for  use  in  the  manufacture  of  exhaust  systems  for  automobiles (2 ) 
0.7664 
ex 8708 92 99 
20 
Pipe  for  guiding  exhaust  gases  from  the  combustion  engine: 
0 % 
— 
31.12.2023 
—  with  a  diameter  of  40  mm  or  more  but  not  more  than  100  mm, 
—  with  a  length  of  90  mm  or  more  but  not  more  than  410  mm, 
—  with  a  wall  thickness  of  0,7  mm  or  more  but  not  more  than  1,3  mm, 
02013R1387 
—  of  stainless  steel, 
for  use  in  the  manufacture  of  exhaust  systems  for  automobiles (2 ) 
0.7696 
ex 8708 92 99 
30 
Exhaust  system  end  cover: 
0 % 
— 
31.12.2023 
—  with  a  wall  thickness  of  0,7  mm  or  more  but  not  more  than  1,3  mm, 
— 
—  made  of  stainless  steel  class  1.4310  and  1.4301  according  to  norm  EN  10088, 
EN — 
—  whether  or  not  with  inner  liner, 
—  whether  or  not  with  surface  treatment, 
for  use  in  the  manufacture  of  exhaust  systems  for  automobiles (2 ) 
01.07.2020 
0.7008 
ex 8708 93 10 
10 
Mechanically  operated  clutch  for  use  with  an  elastomeric belt  in  a  dry  environment  in  a 
0 % 
— 
31.12.2021 
ex 8708 93 90 
10 
CVT  (Continuously  Variable  Transmission)  gear  case: 
— 
—  designed  to  be  bolted  onto  a  splined  shaft  of  outer  diameter  23  mm, 
—  with  an  overall  diameter  of  not  more  than  266  mm  (±  1  mm), 
013.001 
—  comprised  of  2  sheaves  with  tapered  faces, 
—  sheaves  having  taper  of  13  degrees  each, 
—  having  a  main  compression  spring  used  to  resist displacement  between  sheaves,  and 
— 
—  comprised  of  a  cam  or  spring  to  maintain  proper  belt  tension, 
252
for  use  in  the  manufacture  of  all-terrain  vehicles  or  utility  task  vehicles (2 ) 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7007 
ex 8708 93 10 
30 
Mechanically  operated  centrifugal  clutch  for  use  with  an  elastomeric  belt  in  a  dry  envi­
0 % 
p/st 
31.12.2021 
ex 8708 93 90 
30 
ronment  in  a  continuously  variable  transmission  (CVT),  equipped  with: 
—  elements  that  activate  the  clutch  at  given  rotation  and  generate  (in  this  way) 
centrifugal  force, 
—  shaft  ended  with  5  or  more  but  not  more  than  6  degree  taper, 
—  3  weights,  and 
—  1  compression  spring, 
for  use  in  the  manufacture  of  all-terrain  or  utility  task  vehicles (2 ) 
▼M13 
0.7849 
ex 8708 93 10 
40 
Clutch  pedal  with  electronic  parking  brake  connection  (EPB),  whether  or  not  with 
0 % 
— 
31.12.2024 
ex 8708 93 90 
40 
sending  signal  function  for: 
—  cruise  control  reset, 
—  electronic  parking  brake  release, 
—  start  and  stop  engine  management  under  Idle  Stop  and  Go  system  (ISG), 
for  use  in  the  manufacture  of  passenger  vehicles (2 ) 
C3 
0.6526 
ex 8708 94 20 
10 
Rack  steering  gear  in  aluminium  housing  with  homokinetic  hinges  of  a  kind  used  in  the 
0 % 
p/st 
31.12.2024 
02013R1387 
ex 8708 94 35 
20 
manufacture  of  goods  of  Chapter  87 
▼M13 
0.6687 
ex 8708 95 10 
10 
Inflatable  safety  cushion  of  high-strength  polyamide  fibre: 
0 % 
p/st 
31.12.2020 
ex 8708 95 99 
20 
—  sewn, 
— 
—  folded  into  three-dimensional  packing  form,  fixed  by  thermal  forming,  or  flat 
EN — 
(unfolded)  safety  cushion  with  or  without  thermal  forming 
C3 
01.07.2020 
0.6688 
ex 8708 95 10 
20 
Inflatable  safety  cushion  of  high  strength  polyamide  fibre: 
0 % 
p/st 
31.12.2020 
ex 8708 95 99 
30 
—  sewn, 
—  folded, 
—  with  three-dimensionally  applied  silicone  bonding  for  air  bag  cavity  forming  and 
— 
load-regulated  air  bag  sealing, 
013.001 
—  suitable  for  cool  inflator  technology 
0.7009 
ex 8708 99 10 
10 
Six-layer  composite  fuel  tank  assembly  comprising  of: 
0 % 
— 
31.12.2021 
ex 8708 99 97 
60 
—  a  fuel  inlet, 
— 
—  a  pump  flange  assembly  (PFA), 
253
—  a  ventilation  with  rollover  valve  mounted  on  the  top  of  the  tank,  and 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
—  threated  holes  for  PFA  assembly, 
for  use  in  the  manufacture  of  all-terrain  or  utility  task  vehicles (2 ) 
▼M13 
0.7921 
ex 8708 99 97 
18 
Hydrostatic  speed  changer: 
0 % 
p/st 
31.12.2023 
—  with  a  hydro  pump  and  a  differential  with  wheel  axle, 
—  whether  or  not  with  a  fan  impeller  and/or  a  pulley, 
for use in the manufacture of tractors of Subheadings  8701 91 90  and  8701 92 90,  whose 
main  function  is  that  of  a  lawn  mower (2 ) 
C3 
0.7444 
ex 8708 99 10 
25 
Plastic  air  guide  for  directing  air  flow  to  the  surface  of  intercooler  for  use  in  the 
0 % 
— 
31.12.2023 
ex 8708 99 97 
45 
production  of  motor  vehicles (2 ) 
0.7168 
ex 8708 99 10 
35 
Holder  of  front  radiator  or  intercooler  whether  or  not  with  rubber  cushioning  for  use  in 
0 % 
p/st 
31.12.2021 
ex 8708 99 97 
35 
the  manufacture  of  goods  of  Chapter  87 (2 ) 
0.7174 
ex 8708 99 10 
40 
Support  bracket  of  iron  or  steel,  with  mounting  holes,  whether  or  not  with  fixation  nuts, 
0 % 
p/st 
31.12.2021 
ex 8708 99 97 
25 
for  connecting  the  gearbox  to  the  car  body  for  use  in  the  manufacture  of  goods  of 
Chapter  87 (2 ) 
0.7282 
ex 8708 99 97 
85 
Electroplated  interior  or  exterior  parts  consisting  of: 
0 % 
p/st 
31.12.2022 
02013R1387 
—  a  copolymer  of  acrylonitrile-butadiene-styrene  (ABS),  whether  or  not  mixed  with 
polycarbonate, 
—  layers  of  copper,  nickel  and  chromium 
for  use  in  the  manufacturing  of  parts  for  motor  vehicles  of  heading  8701  to  8705 (2 ) 
▼M13 
— 
EN — 
0.6686 
ex 8714 10 90 
10 
Motorcycle  fork  rod  inner  tubes: 
0 % 
p/st 
31.12.2020 
—  of  SAE1541  carbon  steel, 
—  with  a  hard  chromium  layer  of  20  μm  (+  15  μm/–  5  μm), 
01.07.2020 
—  with  a  wall  thickness  of  1,3  mm  or  more,  but  not  more  than  1,6  mm, 
—  with  an  elongation  at  break  of  15 %, 
—  perforated 
C3 
— 
0.6848 
ex 8714 10 90 
20 
Radiators  of  a  kind  used  in  motor  bikes  for  fitting  of  attachments (2 ) 
0 % 
p/st 
31.12.2020 
013.001 
0.7003 
ex 8714 10 90 
50 
Suspension  damper  tubes: 
0 % 
— 
31.12.2021 
—  of  7050-t73  aluminium  alloy, 
—  anodised  on  the  inner  surface, 
— 
—  with  a  mean  roughness  (Ra)  of  the  inner  surface  of  not  more  than  0,4,  and 
254
—  a  maximum  roughness  height  (Rt)  of  the  inner  surface  of  not  more  than  4,0 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6172 
ex 8714 91 30 
25 
Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the 
0 % 
— 
31.12.2023 
ex 8714 91 30 
35 
manufacture  of  bicycles  (including  electric  bicycles) (2 ) 
ex 8714 91 30 
72 
0.6879 
ex 8714 96 10 
10 
Pedals,  for  use  in  the  manufacture  of  bicycles  (including  electric  bicycles) (2 ) 
0 % 
— 
31.12.2020 
0.7421 
ex 8714 99 10 
20 
Bicycle  handlebars: 
0 % 
— 
31.12.2022 
ex 8714 99 10 
89 
—  with  or  without  an  integrated  stem, 
—  either  made  out  of  carbon  fibres  and  synthetic  resin  or  made  of  aluminium, 
for  use  in  the  manufacture  of  bicycles  (including  electric  bicycles) (2 ) 
0.7710 
ex 8714 99 50 
11 
Derailleur  gears,  consisting  of: 
0 % 
— 
31.12.2024 
ex 8714 99 50 
91 
—  rear  derailleur  and  mounting  articles, 
—  with  or  without  front  derailleur, 
for  use  in  the  manufacture  of  bicycles  (including  electric  bicycles) (2 ) 
02013R1387 
0.6878 
ex 8714 99 90 
30 
Seat  posts,  for  use  in  the  manufacture  of  bicycles  (including  electric  bicycles) (2 ) 
0 % 
p/st 
31.12.2020 
— 
EN — 
0.7708 
ex 8714 99 90 
40 
Stem  for  bicycle  handlebars,  for  use  in  the  manufacture  of  bicycles  (including  electric 
0 % 
— 
31.12.2024 
bicycles) (2 ) 
01.07.2020 
0.3191 
ex 9001 10 90 
10 
Image  reverser  made  up  from  an  assembly  of  optical  fibres 
0 % 
— 
31.12.2023 
— 
0.5358 
ex 9001 10 90 
30 
Polymer  optical  fibre  with: 
0 % 
— 
31.12.2021 
013.001 
—  a  poly(methyl  methacrylate)  core, 
—  a  cladding  of  fluorinated  polymer, 
—  a  diameter  of  not  more  than  3,0  mm,  and 
—  a  length  of  more  than  150  m, 
— 
of  a  kind  used  in  the  manufacture  of  polymer  fibre  cables 
255
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7101 
ex 9001 10 90 
40 
Fibre  optic  plates: 
0 % 
— 
31.12.2021 
ex 9001 90 00 
18 
—  uncoated  and  unpainted, 
—  of  a  length  of  30  mm  or  more,  but  not  more  than  234,5  mm, 
—  of  a  width  of  7  mm  or  more,  but  not  more  than  28  mm,  and 
—  of  a  height  of  0,5  mm  or  more,  but  not  more  than  3  mm, 
of  a  kind  used  in  dental  x-ray  systems 
0.6402 
ex 9001 50 41 
40 
Organic  uncut  corrective  eyeglass  lens,  finished  on  both  sides,  to  undergo  a  coating, 
0 % 
— 
31.12.2022 
ex 9001 50 49 
40 
colouring,  edging,  mounting  or  any  other  substantial  process  for  use  in  the  manufacture 
of  corrective  glasses (2 ) 
0.6401 
ex 9001 50 80 
30 
Round  organic  uncut,  semi-finished  eyeglass  lens  with  corrective  effect,  finished  on  one 
0 % 
— 
31.12.2021 
side,  of  a  kind  used  for  the  manufacture  of  finished  eyeglass  lenses 
0.3139 
ex 9001 90 00 
35 
Rear  projection  screen,  comprising  a  lenticular  plastic  plate 
0 % 
p/st 
31.12.2023 
02013R1387 
0.3141 
ex 9001 90 00 
45 
Rod  of  neodymium-doped  yttrium-aluminium  garnet  (YAG)  material,  polished  at  both 
0 % 
p/st 
31.12.2023 
ends 
— 
EN — 
0.4197 
ex 9001 90 00 
55 
Optical,  diffuser,  reflector  or  prism  sheets,  unprinted  diffuser  plates,  whether  or  not 
0 % 
— 
31.12.2023 
possessing  polarising  properties,  specifically  cut 
01.07.2020 
0.4179 
ex 9001 90 00 
70 
Poly(ethylene  terephthalate)  film  with  a  thickness  of  less  than  300  μm  according  to 
0 % 
— 
31.12.2021 
ASTM  D2103,  having  on  one  side  prisms  of  acrylic  resin  with  a  prism  angle  of  90° 
and  a  prism  pitch  of  50  μm 
— 
013.001 
0.4883 
ex 9001 90 00 
85 
Light  guide  panel  made  of  poly(methyl  methacrylate): 
0 % 
— 
31.12.2020 
—  whether  or  not  cut, 
— 
—  whether  or  not  printed, 
for  use  in  the  manufacture  of  backlight  units  for  flat  screen  TVs (2 ) 
256
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6909 
ex 9002 11 00 
15 
Infrared  lens  with  motorised  focus  adjustment: 
0 % 
— 
31.12.2020 
—  using  wavelengths  of  3  μm  or  more  but  not  more  than  5  μm, 
—  providing  a  clear  picture  from  50  m  to  infinity, 
—  with  fields  of  vision  sizes  of  3°  x  2,25°  and  9°  x  6,75°, 
—  with  a  weight  of  not  more  than  230  g, 
—  with  a  length  of  not  more  than  88  mm, 
—  with  a  diameter  of  not  more  than  46  mm, 
—  athermalized, 
for  use  in  the  manufacture  of  thermal  imaging  cameras,  infrared  binoculars,  weapons 
scopes (2 ) 
0.7590 
ex 9002 11 00 
18 
Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical 
0 % 
— 
31.12.2023 
elements  with: 
—  a  horizontal  field  of  view  range  to  a  maximum  of  120  deg, 
—  a  diagonal  field  of  view  range  to  a  maximum  of  92  deg, 
—  a  focal  length  to  a  maximum  of  7,50  mm, 
—  a  relative  aperture  of  a  maximum  of  F/2,90, 
—  a  maximum  diameter  of  22  mm, 
of a kind used for the production of CMOS (Complementary metal–oxide-semiconductor) 
02013R1387 
automotive  cameras 
▼M13 
— 
EN — 
0.5692 
ex 9002 11 00 
20 
Lenses: 
0 % 
— 
31.12.2022 
—  measuring  not  more  than  95  mm  ×  55  mm  ×  50  mm, 
—  with  a  resolution  of  160  lines/mm  or  better,  and 
01.07.2020 
—  with  a  zoom  ratio  of  18  times 
C3 
— 
013.001 
0.7102 
ex 9002 11 00 
25 
Infrared  optical  unit  composed  of: 
0 % 
— 
31.12.2021 
—  a  monocrystalline  silicon  lens  with  a  diameter  of  84  mm  (±0,1  mm),  and 
—  a  monocrystalline  germanium  lens  with  a  diameter  of  62  mm  (±0,05  mm), 
— 
assembled  on  a  machined  aluminium  alloy  support,  of  a  kind  used  for  thermal  imaging 
cameras 
257
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7107 
ex 9002 11 00 
35 
Infrared  optical  unit  composed  of: 
0 % 
— 
31.12.2021 
—  a  silicon  lens  with  a  diameter  of  29  mm  (±0,05  mm),  and 
—  a  monocrystalline  calcium  fluoride  lens  with  a  diameter  of  26  mm  (±0,05  mm), 
assembled  on  a  machined  aluminium  alloy  support,  of  kind  a  used  for  thermal  imaging 
cameras 
0.7103 
ex 9002 11 00 
45 
Infrared  optical  unit: 
0 % 
— 
31.12.2021 
—  with lenses made of silicon, germanium or chalcogenide glass of a diameter not more 
than  62  mm  (±0,05  mm), 
—  whether  or  not  mounted  on  a  machined  aluminium  alloy  support, 
of  a  kind  used  for  thermal  cameras  or  IP  network  cameras 
0.3177 
ex 9002 11 00 
50 
Lens  unit: 
0 % 
— 
31.12.2023 
—  having  a  focal  length  of  25  mm  or  more  but  not  more  than  150  mm, 
02013R1387 
—  consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more 
than  190  mm 
— 
0.7104 
ex 9002 11 00 
55 
Infrared  optical  unit  composed  of: 
0 % 
— 
31.12.2021 
EN — 
—  a  germanium  lens  with  a  diameter  of  11  mm  (±0,05  mm), 
—  a  monocrystalline  calcium  fluoride  lens  with  a  diameter  of  14  mm  (±0,05  mm),  and 
01.07.2020 
—  a  silicon  lens  with  a  diameter  of  17  mm  (±0,05  mm), 
assembled  on  a  machined  aluminium  alloy  support,  of  a  kind  used  for  thermal  imaging 
cameras 
— 
013.001 
0.7105 
ex 9002 11 00 
65 
Infrared  optical  unit: 
0 % 
— 
31.12.2021 
—  with  a  silicon  lens  with  a  diameter  of  26  mm  (±0,1  mm), 
—  mounted  on  a  machined  aluminium  alloy  support, 
— 
of  a  kind  used  for  thermal  imaging  cameras 
258
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.7106 
ex 9002 11 00 
75 
Infrared  optical  unit  composed  of: 
0 % 
— 
31.12.2021 
—  a  germanium  lens  with  a  diameter  of  19  mm  (±0,05  mm), 
—  a  monocrystalline  calcium  fluoride  lens  with  a  diameter  of  18  mm  (±0,05  mm), 
—  a  germanium  lens  with  a  diameter  of  20,6  mm  (±0,05  mm), 
assembled  on  a  machined  aluminium  alloy  support,  of  a  kind  used  for  thermal  imaging 
cameras 
0.6572 
ex 9002 11 00 
85 
Lens  assembly  with: 
0 % 
— 
31.12.2024 
—  a  horizontal  field  of  view  range  of  20  deg  or  more,  but  not  more  than  200  deg, 
—  a  focal  length  of  1,16  mm  or  more,  but  not  more  than  20  mm, 
—  a  relative  aperture  of  F/1,2  or  more,  but  not  more  than  F/4,  and 
—  a  diameter  of  5  mm  or  more,  but  not  more  than  40  mm, 
for  use  in  the  manufacture  of  CMOS  automotive  cameras  or  in  IP  network  cameras 
production (2 ) 
02013R1387 
0.3140 
ex 9002 90 00 
30 
Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with 
0 % 
p/st 
31.12.2023 
a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic 
plates 
— 
EN — 
0.5807 
ex 9002 90 00 
40 
Mounted  lenses  made  from  infrared transmitting chalcogenide  glass,  or  a  combination  of 
0 % 
p/st 
31.12.2022 
01.07.2020 
infrared  transmitting  chalcogenide  glass  and  another  lens  material 
— 
0.5955 
ex 9025 80 40 
30 
Electronic  barometric  semiconductor  pressure  sensor  in  a  housing,  mainly  consisting  of: 
0 % 
p/st 
31.12.2023 
—  a  combination  of  one  or  more  monolithic  application-specific  integrated  circuits 
013.001 
(ASIC),  and 
—  at  least  one  or  more  microelectromechanical sensor  elements  (MEMS)  manufactured 
with  semiconductor  technology,  with  mechanical  components  arranged  in  three- 
— 
dimensional  structures  on  the  semiconductor  material 
259
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
0.6288 
ex 9025 80 40 
50 
Electronic  semiconductor  sensor  for  measuring  at  least  two  of  the  following  quantities: 
0 % 
p/st 
31.12.2024 
—  atmospheric pressure, temperature, (also for temperature compensation), humidity,  or 
volatile  organic  compounds, 
in  a  housing  suitable  for  the  automatic  printing  of  conductor  boards  or  Bare  Die  tech­
nology,  containing: 
—  one  or  more  monolithic  application-specific  integrated  circuits  (ASIC), 
—  one  or  more  microelectromechanical  sensor  elements  (MEMS)  manufactured  with 
semiconductor  technology,  with  mechanical  components  arranged  in  three-dimen­
sional  structures  on  the  semiconductor  material, 
of  a  kind  used  for  incorporation  into  products  of  Chapters  84-90  and  95 
▼M13 
0.6527 
ex 9029 20 31 
20 
Clustered instrument panel with a microprocessor control board, with or without stepping 
0 % 
p/st 
31.12.2024 
ex 9029 90 00 
30 
motors,  LED  indicators  or  LCD  display  showing  at  least: 
—  speed, 
—  engine  revolutions, 
—  engine  temperature, 
—  the  fuel  level, 
02013R1387 
communicating  via  CAN-BUS  and/or  K-LINE  protocols,  of  a  kind  used  in  the  manu­
facture  of  goods  of  Chapter  87 
C3 
— 
0.3292 
ex 9032 89 00 
30 
Electronic  controller  of  electric  power  steering  (EPS  controller) 
0 % 
p/st 
31.12.2023 
EN — 
0.4253 
ex 9032 89 00 
40 
Digital  valve  controller  for  controlling  liquids  and  gases 
0 % 
p/st 
31.12.2022 
01.07.2020 
0.7004 
ex 9032 89 00 
50 
Gas  panel  for  regulating  and  controlling  of  the  gas  flow  rate,  working  with  plasma 
0 % 
— 
31.12.2021 
technology,  comprising: 
—  an electronic mass flow regulator, suitable for receiving and sending of analogue and 
— 
digital  signals, 
013.001 
—  four  pressure  transducers, 
—  two  or  more  pressure  valves, 
—  electric  interfaces,  and 
—  several  connectors  for  gas  lines, 
— 
—  suitable  for  in-situ  plasma  bonding  processes  or  for  multi  frequency  bond  activating 
260
processes 
 

▼C3 
Serial 
Rate  of  autonomous 
Supplementary 
Date  foreseen  for 
CN  code 
TARIC 
Description 
number 
duty 
Unit 
mandatory  review 
▼M13 
0.5025 
ex 9401 90 80 
10 
Ratchet  disk  for  use  in  the  manufacture  of  reclining  car  seats (2 ) 
0 % 
p/st 
31.12.2020 
C3 
0.6715 
ex 9401 90 80 
60 
Outer  part of  a  headrest  made  of  perforated bovine  leather, lined  with  a  scrim-reinforced 
0 % 
— 
31.12.2020 
lamination  liner  and  without  foam  padding,  after  reworking  (stitching  of  the  leather  and 
embroidery  application)  used  in  manufacture  of  seats  of  motor  vehicles 
0.4846 
ex 9503 00 75 
10 
Plastic  cable  car  scale  models,  whether  or  not  with  a  motor,  for  printing (2 ) 
0 % 
p/st 
31.12.2020 
ex 9503 00 95 
10 
0.6950 
ex 9607 20 10 
10 
Sliders,  narrow  tape  with  mounted  zipper  teeth,  pin/boxes  and  other  parts  of  slide 
0 % 
— 
31.12.2020 
fasteners,  of  base  metal  for  use  in  the  manufacture  of  zippers (2 ) 
0.6949 
ex 9607 20 90 
10 
Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers (2 ) 
0 % 
— 
31.12.2020 
0.3286 
ex 9608 91 00 
10 
Non-fibrous  plastic  pen-tips  with  an  internal  canal 
0 % 
— 
31.12.2023 
02013R1387 
0.3289 
ex 9608 91 00 
20 
Felt  tips  and  other  porous-tips  for  markers,  without  internal  canal 
0 % 
— 
31.12.2023 
0.2737 
ex 9612 10 10 
10 
Ribbons  of  plastic  with  segments  of  different  colours,  providing  the  penetration  of  dyes 
0 % 
— 
31.12.2023 
by  heat  into  a  support  (so  called  dye-sublimation) 
— 
(1 )  However,  the  suspension  of  tariff  duties  does  not  apply  where  the  processing  is  carried  out  by  retail  or  catering  undertakings. 
EN — 
(2 )  Suspension  of  duties  is  subject  to  end-use  customs  supervision  in  accordance  with  Article  254  of  Regulation  (EU)  No  952/2013  of  the  European  Parliament  and  of  the  Council  of  9  October  2013  laying  down  the  Union 
Customs  Code  (OJ  L  269,  10.10.2013,  p.  1) 
(3 )  Only  the ad valorem  duty  is  suspended.  The  specific  duty  shall  continue  to  apply. 
(4 )  A  surveillance  of  imports  of  goods  covered  by  this  tariff  suspension  shall  be  established  in  accordance  with  the  procedure  laid  down  in  Articles  55  and  56  of  Commission  Implementing  Regulation  (EU)  2015/2447  of  
01.07.2020 
24  November  2015  laying  down  detailed  rules  for  implementing  certain  provisions  of  Regulation  (EU)  No  952/2013  of  the  European  Parliament  and  of  the  Council  laying  down  the  Union  Customs  Code  (OJ  L  343, 
29.12.2015,  p.  558). 

(5 )  CUS  (Customs  Union  and  Statistics  Number)  is  assigned  to  each  ECICS  record  (product).  ECICS  (European  Customs  Inventory  of  Chemical  Substances)  is  an  information  tool  managed  by  the  European  Commission, 
General  Directorate  for  Taxation  and  Customs  Union.  More  information  can  be  found  via  the  following  link:  http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htm 
►M13  __________ ◄ 
— 
013.001 
— 
261
 

Document Outline