Ceci est une version HTML d'une pièce jointe de la demande d'accès à l'information 'DG GROW: Plastics Europe voluntary commitments'.





Ref. Ares(2018)1373950 - 13/03/2018
Plastics 2030
PlasticsEurope's Voluntary Commitment
to increasing circularity and resource efficiency


link to page 5 link to page 7 link to page 8 link to page 8 link to page 8 link to page 9 link to page 10 link to page 10 link to page 10 link to page 10 link to page 12 link to page 13 link to page 13 link to page 16 link to page 16 link to page 16 link to page 17 Plastics 2030 
PlasticsEurope’s Voluntary Commitment to increasing circularity and resource efficiency 
 
 
Contents 
 
Executive Summary ............................................................................................................ 5 
Introduction ......................................................................................................................... 7 
Section I – General Commitments ..................................................................................... 8 
1.  Preventing Plastics Litter in the Environment ........................................................ 8 
1.1 Actions to Prevent Pellet Loss .............................................................................. 8 
1.2 Actions to Prevent Littering .................................................................................. 9 
2.  Improving Resource Efficiency and Accelerating Innovation to Increase 
Circularity ...................................................................................................................... 10 
2.1 Accelerate using Alternative Feedstocks ........................................................... 10 
2.2 Facilitate Future Resource Efficiency Gains ...................................................... 10 
3.  Creating Global Awareness ................................................................................... 12 
Section II – Sector Specific Commitments - Platforms................................................... 13 
1.  Increasing Plastics Packaging Recycling and Re-use ......................................... 13 
Section III –A Regulatory Framework for Success ......................................................... 16 
1.  EU Regulatory Support .......................................................................................... 16 
2.  EU Funding ............................................................................................................. 16 
Section IV – Monitoring and Guiding Progress .............................................................. 17 
 
 
 
 



Executive Summary 
 
The European Commission aims to transform Europe into a more circular and resource 
efficient economy. PlasticsEurope fully supports this objective. 
 
It is widely recognised that plastics have a crucial role to play in delivering a more 
sustainable future. Through their unique combination of light-weight, durability and other 
intrinsic properties, plastics already contribute to emissions reduction and more efficient use 
of resources across a range of different sectors and everyday applications. As a result of 
their versatility and capacity for innovation, plastic materials are also frequently best placed 
to support breakthrough sustainable technologies. 
 
However, challenges relating to littering and end-of-life options for certain types of plastics 
waste must be addressed if the material is to achieve its fullest potential in a circular and 
resource efficient economy.  
 
It is in this spirit of commitment to future generations, PlasticsEurope has decided to set a 
series of ambitious targets and initiatives up to 2030.  
 
The Plastics 2030 Voluntary Commitment focuses on preventing leakage of plastics 
into the environment, improving resource efficiency and the circularity of plastics 
packaging applications. 
 
PlasticsEurope will aim at achieving the goal of 100% re-use, recycling and or recovery 
of all plastics packaging in the EU-28, Norway and Switzerland by 2040. The overriding 
focus of this commitment is to ensure high rates of re-use and recycling with the ambition 
to reach 60% re-use and recycling of plastics packaging by 2030.  
Ensuring the highest possible rates for recycling and re-use will require actions in the 
following areas: 
  Increase efforts along the value chain to include eco-design aspects to deliver 
sustainable packaging solutions e.g. facilitating re-usability and recyclability 
  Collaboration with recyclers and public authorities on the application of improved 
separate waste collection systems 
  Public and private funding 
  Investment in research and development of: 
o  enhanced waste sorting technology 


o  more effective physical recycling machinery 
o  innovative and economical chemical recycling technologies 
 
The targets for recycling and reuse of packaging in general will complement already 
established recycling programmes for specific plastics types. 
 
Another important pillar of the Plastics 2030 Voluntary Commitment is a further increase in 
existing activities aimed at preventing littering that includes educational projects across 
Member States, targets to prevent pellet loss, and new research into the origins of the most 
commonly occurring plastic litter in the environment. 
 
These efforts will be complemented by additional actions to enhance the resource 
efficiency of plastics packaging and accelerate innovation aimed at boosting their 
circularity. This will involve further research into alternative feedstocks, more regular updates 
of product Life-Cycle Inventories and Environmental Product Declarations, the publication of 
extended waste data, and new eco-design guidelines for plastics packaging.  
 
PlasticsEurope will work on concrete action plans and time-based performance 
indicators against all of the above objectives by mid-2018. From 2019, an annual progress 
report will be published.  
 
Yearly evaluation of the progress of the Plastics 2030 Voluntary Commitment will be 
provided by an independent committee made up of representatives of the European 
Commission, European Parliament, national and local authorities, civil society and 
academia.  
 
Delivering against these ambitious objectives will also depend on the commitment and 
support of policy makers at European, national and local level to ensure the implementation 
of appropriate regulatory frameworks, as well as the mobilisation of public funding. 
 
 


 
Introduction 
 
The European Commission aims at transforming Europe into a more circular and resource 
efficient economy; PlasticsEurope fully supports this objective. 
 
It is widely recognised that plastics have a crucial role to play in delivering a more 
sustainable future. Through their unique combination of light-weight, durability and other 
intrinsic properties, plastics already contribute to emissions reduction and more efficient use 
of resources across a range of different sectors and everyday applications. As a result of 
their versatility and capacity for innovation, plastic materials are also invariably best placed 
to support breakthrough sustainable technologies. 
 
However, challenges relating to littering and end-of-life options for certain types of plastics 
waste - especially packaging waste - must be addressed if the material is to achieve its 
fullest potential in a circular and resource efficient economy.  
 
It is in this spirit of commitment to sustainable development, PlasticsEurope has decided to 
set a series of ambitious targets and initiatives up to 2030 that are focussed on the key 
areas of preventing leakage of plastics into the environment, improving resource efficiency 
and increasing recycling and re-use rates.  
 
With this Voluntary Commitment, PlasticsEurope is advancing the plastics industry’s role to a 
next  level  of  engagement,  recognising  that  this  transformation  will  only  take  place  through 
solutions put into reality and the regulatory support of the EU institutions. 
 
Making Circularity and Resource Efficiency a Reality 
PlasticsEurope is committed to accelerating ongoing and establish new initiatives to achieve 
a more circular and resource efficient economy. The regional scope is the EU-28 plus 
Norway and Switzerland. From 2019, an annual progress report will be published. 
 
 


Section I – General Commitments  
 
1.  Preventing Plastics Litter in the Environment 
 
1.1 Actions to Prevent Pellet Loss 
Background:  
Operation Clean Sweep® (OCS) is a voluntary programme aiming towards zero pellet loss 
from the production and conversion of plastic pellets and their subsequent distribution and 
handling. Its objective is to prevent industrial plastic pellet losses from getting into the 
environment. 
To ensure that all potential leakage points of plastic pellets are identified and managed, we 
focus on prevention and control measures.  
 
Target: 
  PlasticsEurope’s target is to have 100% of its member companies sign the OCS 
pledge to which OCS is applicable by the end of 2018.  
  Develop by 2018 a transparent, harmonised monitoring scheme for the collection of 
relevant and comparable information from all signed members to measure progress 
of the industry. Reports on progress will be published and made available to the EU 
institutions and key stakeholders on a yearly basis. 
  In 2019 PlasticsEurope will explore the feasibility to develop a common assessment 
tool with its members.  
  Based on the successful collaboration with the Antwerp port authority in 2017, we are 
aiming at engaging with at least one other major European port by the end of 2018. 
By 2030 we aim at securing that all major industrial plastic pellet handling ports in the 
EU have taken measures to implement OCS.  
  PlasticsEurope will expand the work of the platforms with the supply chain and 
relevant stakeholders both at global, EU and national levels with a view to accelerate 
the implementation of OCS in the plastics value chain.  
 
For more information on OCS, please go to: www.opcleansweep.eu  
 
 
 


1.2 Actions to Prevent Littering 
 
a)  Reduce Littering of Top Plastic Items Found in the Environment 
 
By 2018 PlasticsEurope will intensify its engagement with key stakeholders at both EU and 
global levels to investigate and analyse the type of plastic items found in the European 
environment.  
We will also explore the potential to launch and financially support studies to fill knowledge 
gaps with the aim to efficiently tackle and significantly reduce plastic waste littering. 
Together with the relevant parts of the value chain, we will develop and implement solutions 
to prevent these items from being littered. 
 
b)  Support to Educational Programmes 
 
Background: 
Together with value chain partners, PlasticsEurope supports educational projects for 
students (starting at six years of age) financially across the EU.  
 
Target: 
  PlasticsEurope will continue to work closely together with other stakeholders to 
develop and support projects aimed at raising awareness, positively enhancing 
knowledge levels, as well as the attitude and behaviour of citizens.  
  For example, more than 30 educational related projects that are running in 28 
member states under the flag of Marine Litter Solutions like Grimpola Ecomar 
Foundation (Spain), Recykling Rejs (Poland), CSI: Litter Challenge (UK), and La 
plastica in vacanza (Plastics on holiday) (Italy).  
  The projects will be regularly reviewed and updated. 
 
 
 


2.  Improving Resource Efficiency and Accelerating Innovation to Increase Circularity 
 
2.1 Accelerate using Alternative Feedstocks 
In addition to increasing recycling in the value chain, PlasticsEurope will continue to expand 
and explore the use of CO2 and other renewable feedstocks. For example, by 2019 it will 
conduct a study on plastics in the circular economy and on increasing the use of alternative 
feedstocks.  
Based on this study, recommendations for actions will be formulated aiming at minimising 
environmental impacts. 
 
2.2 Facilitate Future Resource Efficiency Gains 
To utilise additional and future potential opportunities, the key activities listed below have 
been identified: 
 
a)  Product Life Cycle Inventory 
 
Background: 
PlasticsEurope promotes the use of Life Cycle Thinking (LCT) to improve understanding 
about product benefits and their resource efficiency, in order for the industry to take informed 
decisions. As a scientific method, Life cycle assessment (LCA) is a technique to analyse the 
potential environmental impacts associated with a product, process or service.  
 
Target: 
  To make informed decisions using the latest data, as of 2018, PlasticsEurope 
commits to a more regular update (at least every three years) of its Life-Cycle 
Inventory dataset (LCI) and Environmental Product Declarations (EPD) for the main 
plastics and recyclates. 
 
 
b)  Extended Waste Data 
 
Background: 
PlasticsEurope extensively tracks reliable data and information on post-consumer plastic 
waste collection and treatment at European and country level. Since 2005, PlasticsEurope 
has commissioned “Post-consumer Plastic Waste Management” reports with the aim of 
having an increased understanding of post-consumer plastics waste flows and treatments in 
Europe and monitor their evolution over time.  
10 

 
Target: 
  In 2018, PlasticsEurope will expand the scope of the plastics waste data to be 
collected to more precisely monitor the circularity of plastics.  
 
 
c)  Eco-Design Guidelines for Plastics Packaging 
 
Background: 
PlasticsEurope is actively engaging with stakeholder to increase a common understanding 
and application of eco-design with plastics. Designing products with plastics aimed at 
minimizing their environmental impacts over the full life cycle.  
 
Target: 
  By 2020 the Plastics Industry will have finalised the on-going development of eco-
design guidelines for plastics packaging and design for recycling to maximise re-use 
and recycling of plastic packaging. 
 
d)  Standardisation support/requirement 
 
Background: 
Standardisation is an opportunity to engage in dialogue with stakeholders to address issues 
that concern human safety, the environment and the products; aimed at setting benchmarks 
and criteria to harmonize best practice, accepted methodology and behaviour in industry and 
society. 
 
Target: 
  From 2018 on, PlasticsEurope will put in place its expertise and resources to properly 
advance the critical work on standardisation of plastics within the context of the 
Circular Economy, through a multi-stakeholder dialogue:  
  ISO (TC 61) - subcommittee “Environment“, dealing with circular economy, 
bioplastics, microplastics, recyclates 
  CEN (TC 249) - Steering Committee “Circular economy“ 
  National examples, e.g. in Germany at DIN (FNK) – Core group for 
coordinating national, European and international activities 
 
11 

3.  Creating Global Awareness  
 
PlasticsEurope will further increase its engagement to help to deploy appropriate solutions to 
prevent marine litter and promote circularity around the world, including its active 
participation in EU Circular Economy missions. 
We will strengthen our engagement with other international industry organizations and 
stakeholders to initiate and manage global action: 
 
  Global Plastics Alliance (GPA) 
To prevent marine litter over 260 projects have been created by 70 plastics 
associations in 35 countries over the past years.  
By 2018 new targets to continue to expand the efforts will be defined. 
 
  World Plastics Council (WPC) 
The leading plastic resin manufacturers from around the world have joined since its 
inception in 2014. The WPC is committed to expand its engagement to support 
global initiatives, such as Ocean Conservancy and Closed Loop Fund. It will expand 
its collaboration with UNEP, G7/G20, WBSCD, and others, to jointly promote marine 
litter solutions globally. 
 
 
12 

Section II – Sector Specific Commitments - Platforms 
 
1.  Increasing Plastics Packaging Recycling and Re-use 
 
PlasticsEurope will aim to achieve the goal of 100% re-use, recycling and or recovery of 
all plastics packaging in the EU-28, Norway and Switzerland by 2040. The overriding focus 
of this commitment is to ensure high rates of re-use and recycling with the ambition to 
reach 60% re-use and recycling of plastics packaging by 2030.  
 
Therefore, in addition to the General Commitments (s. Section I) and its involvement in a 
significant number of national initiatives, PlasticsEurope has established a number of 
European platforms to bring forward specific commitments. These commitments will serve 
as the basis for developing feasible approaches and innovative solutions to stimulate 
increased recycling across different plastic types and sectors. This will also entail a 
strengthened multi-stakeholder engagement and collaboration along the value chain.  
 
We will provide a significant share of the required resources (expertise and funding) to 
achieve the platforms’ objectives.  
 
a)  Polyolefins Circular Economy Platform (PCEP) 
 
The European Plastics Industry has created this value chain collaboration to drive Europe’s 
Polyolefins-based packaging recycling efforts. The platform is a multi-stakeholder group that 
seeks to identify the barriers and opportunities to increase Europe’s polyolefins recycling and 
work towards ensuring the supply of high quality recycled polyolefins for the European 
market.  
 
Innovation is at the heart of this initiative and will require both public and private support to 
be successful.  
The following priority areas of work have been identified:  
  Development of packaging design guidelines and assessment protocols 
according to the principles of the Circular Economy
  Innovation to increase the recyclability of flexible and rigid packaging
  EU wide quality standards for sorted plastics, harmonisation of tests methods 
for recycled plastic materials and certification of plastic recycling operations
13 

  Innovation & development of end-use markets to encourage demand for recycled 
plastics
  Stimulating innovation to improve mechanical recycling, conversion 
technologies and reuse. 
  Drive the research and development of new technologies to convert non-
mechanically recyclable plastics into feedstock for the production of new 
materials
 
By the end of 2018, using the results of an in-depth analysis a roadmap will be developed 
that will identify bottlenecks to circularity and the best options to remove them to achieve 
increased recycling and reuse.  
 
b)  Styrenics Circular Solutions 
 
The Polystyrene (PS) and Expandable Polystyrene (EPS) producers are actively supporting 
the development of technologies that enable the recycling of Polystyrene-based products 
back into their original applications. With a strong focus on innovation, these new 
technologies will enable the incorporation of post-consumer waste back into production 
processes, meeting most-demanding standards. By the end of 2018, the most promising 
technologies and the path forward will be assessed. 
 
The PS/EPS producers will actively collaborate with the complete value chains to further 
improve the collection and sorting systems for packaging waste. The objective is to 
considerably expand the accessible market of post-consumer PS and EPS waste.  
 
An independent legal structure with dedicated funding will be set up, and business cases will 
be developed for the industrial scale-up of the most promising technologies. An example of 
such business case is the PSLoop cooperative that was established to build a pilot plant 
which will recycle PS/EPS construction materials. 
 
The EU is invited to monitor and review the progress made. 
 
c)  Vinyl Circular Solutions (VCS) 
 
Vinyl Circular Solutions (VCS) is the PVC Packaging Platform of the European Council of Vinyl 
Manufacturers (ECVM). VCS actively develops and promotes the use of eco-efficient, cost-
14 

effective  and  safe  PVC  packaging  materials  which  ensure  that  packed  articles  have  a 
considerably increased shelf-life. At the end of their life PVC packaging can be mechanically 
recycled. 
 
The  European  Council  of  Vinyl  Manufacturers  is  a  founding  member  of  VinylPlus® 
(www.vinylplus.eu), the long established Voluntary Commitment to sustainable development 
by  the  entire  European  PVC  value  chain  (resin  manufacturers,  additives  producers  and 
converters), and a benchmark for other industry initiatives. Launched in 2000, VinylPlus® aims 
at strengthening the sustainability of PVC products and of the entire industry through a holistic 
approach including increasing safe and quality PVC recycling (annual progress report). The 
VinylPlus® commitment includes, amongst others, a target to recycle 800,000 tonnes of PVC 
per year by 2020.  
 
To continue the journey started in 2000, the European PVC value chain will review in 2018 
VinylPlus®’ achievements with a view to defining, in consultation with the stakeholders, new 
ambitious recycling targets alongside a set of other concrete objectives for the next phase of 
its Voluntary Commitment towards 2030. 
 
Other sectors and plastic types not covered by this commitment, are addressed by the 
“Voluntary Commitments towards a circular economy” by EuPC and others. 
 
 
15 

Section III – A Regulatory Framework for Success 
 
1.  EU Regulatory Support 
 
In order to achieve our targets towards a more sustainable, resource efficient and globally 
competitive European Plastics Industry, EU policy support is required: 
 
  Zero Plastics to Landfill 
The landfilling of recyclable and other recoverable post-consumer waste shall be 
stopped as soon as possible in the European Union. 
 
  Internal Market 
Maintain the EU internal market legal base for the EU Packaging & Packaging Waste 
Directive and all its amending acts. 
 
  Separate Collection 
Mandatory separate collection of all packaging from residual waste by 2025. 
 
  Alignment of REACH / Waste / CLP / Product legislation 
Alignment of REACH, CLP and waste and product legislation to remove the obstacles 
for recycling. It includes the implementation of a risk based approach in order to 
secure the full potential of plastics recycling of longer life applications into controlled 
loops (with traceability of SVHC additives) and secure the safety of virgin/recycled 
plastics for their intended application. 
 
  Food Contact Regulation 
Adoption of all measures required for the full implementation of the Food Contact 
Regulation EC/282/2008. 
 
2.  EU Funding 
 
Mobilise public funding (such as Horizon 2020) to encourage and stimulate innovation in 
plastics: 
  feedstock recycling 
  re-use models 
  low carbon footprint feedstocks 
  innovation in traceability of materials, collection schemes, sorting and treatment of 
secondary raw materials. 
16 


Section IV – Monitoring and Guiding Progress 
 
As this will establish a multi-year process of continuous improvement and learning, we invite 
an independent committee - made up of representatives from the European Commission 
and European Parliament, academia, civil society, and PlasticsEurope - to monitor and guide 
the progress made.  While providing the general oversight of the Plastics 2030 Voluntary 
Commitments, this advisory committee serves to complement the respective stakeholder 
committees of the individual Circular Economy and Value Chain Initiatives. 
 
 
 
 
Brussels, 11 January 2018 
 
 
 
 
 
 
 
President 
Chair 
Chair 
Chair 
PlasticsEurope 
ECVM 
Styrenics Circular 
PCEP 
Solutions Steering 
Committee 
 
 
 
17 





PlasticsEurope is one of the leading European trade 
associations with centres in Brussels, Frankfurt, London, 
Madrid, Milan and Paris. The association is networking with 
European and national plastics associations and has more 
than 100 member companies, producing over 90% of all 
polymers across the EU28 member states plus Norway, 
Switzerland and Turkey.  
www.plasticseurope.org 
Styrenics 
The Styrenics Circular Solutions is a joint industry initiative to 
Circular 
increase the circularity of polystyrene. The initiative engages 
Solutions 
the value chain in the development and industrialization of 
new recycling technologies and solutions. It aims to strengthen 
the sustainability of polystyrene products while improving 
resource efficiency within the circular economy.  
xxxx@xxxxxxxxxxxxxxxxx.xxx 
The European Council of Vinyl Manufacturers represents six 
leading European producers of PVC resin, which account for 
around 75% of the EU-28 PVC resin production. These 
businesses operate around 40 different plants spread over 23 
sites, and employ approximately 7,000 people.   
www.pvc.org 
Polyolefins Circular Economy Platform (PCEP) is a European 
joint industry value chain initiative. It has been founded in 
order to advance the circular economy by increasing the reuse 
and recycling of polyolefin based products and the use of 
recyclates as raw material. By working together our industry 
aims to ensure long-term sustainability for polyolefin products. 
www.pcep.eu 



PlasticsEurope AISBL
Avenue E. van Nieuwenhuyse 4/3 
B-1160 Brussels - Belgium
Phone  +32 (0)2 675 3297 
Mai  
l
xxxx@xxxxxxxxxxxxxx.xxx
Sit  
e
www.plasticseurope.org
@plasticseurope

Document Outline